Variable-density jet flows induced by concentrated sources of momentum and energy

The planar and axisymmetric variable-density flows induced in a quiescent gas by a concentrated source of momentum that is simultaneously either a source or a sink of energy are investigated for application to the description of the velocity and temperature far fields in laminar gaseous jets with either large or small values of the initial jet-to-ambient temperature ratio. The source fluxes of momentum and heat are used to construct the characteristic scales of velocity and length in the region where the density differences are of the order of the ambient density, which is slender for the large values of the Reynolds number considered herein. The problem reduces to the integration of the dimensionless boundary-layer conservation equations, giving a solution that depends on the gas transport properties but is otherwise free of parameters. The boundary conditions at the jet exit for integration are obtained by analysing the self-similar flow that appears near the heat source in planar and axisymmetric configurations and also near the heat sink in the planar case. Numerical integrations of the boundary-layer equations with these conditions give solutions that describe accurately the velocity and temperature fields of very hot planar and round jets and also of very cold plane jets in the far field region where the density and temperature differences are comparable to the ambient values. Simple scaling arguments indicate that the point source description does not apply, however, to cold round jets, whose far field region is not large compared with the jet development region, as verified by numerical integrations

Control of a Teleoperation System by State Convergence with Variable Time Delay

In this paper, we propose a novel control scheme for bilateral teleoperation of n degree-of-freedom (DOF) nonlinear robotic systems with time-varying communication delay. We consider that the human operator contains a constant force on the local manipulator. The local and remote manipulators are coupled using state convergence control scheme. By choosing a Lyapunov-Krasovskii functional, we show that the local-remote teleoperation system is asymptotically stable. It is also shown that, in the case of reliable communication protocols, the proposed scheme guarantees that the remote manipulator tracks the delayed trajectory of the local manipulator. The time delay of communication channel is assumed to be unknown and randomly time varying, but the upper bounds of the delay interval and the derivative of the delay are assumed to be known.

Stability Analysis of Teleoperation System by State Convergence with Variable Time Delay

We propose a novel control scheme for bilateral teleoperation of n degree-of-freedom (DOF) nonlinear robotic systems with time-varying communication delay. A major contribution from this work lies in the demonstration that the structure of a state convergence algorithm can be also applied to nth-order nonlinear teleoperation systems. By choosing a Lyapunov Krasovskii functional, we show that the local-remote teleoperation system is asymptotically stable. The time delay of communication channel is assumed to be unknown and randomly time varying, but the upper bounds of the delay interval and the derivative of the delay are assumed to be known.

Variable threshold algorithm for division of labor analyzed as a dynamical system

Division of labor is a widely studied aspect of colony behavior of social insects. Division of labor models indicate how individuals distribute themselves in order to perform different tasks simultaneously. However, models that study division of labor from a dynamical system point of view cannot be found in the literature. In this paper, we define a division of labor model as a discrete-time dynamical system, in order to study the equilibrium points and their properties related to convergence and stability. By making use of this analytical model, an adaptive algorithm based on division of labor can be designed to satisfy dynamic criteria. In this way, we have designed and tested an algorithm that varies the response thresholds in order to modify the dynamic behavior of the system. This behavior modification allows the system to adapt to specific environmental and collective situations, making the algorithm a good candidate for distributed control applications. The variable threshold algorithm is based on specialization mechanisms. It is able to achieve an asymptotically stable behavior of the system in different environments and independently of the number of individuals. The algorithm has been successfully tested under several initial conditions and number of individuals.

9-fold Fresnel-Kohler concentrator with Fresnel lens of variable focal point

Non-uniform irradiance patterns over Multi-Junction Cells gives rise to power losses, especially when considering spectral irradiance distributions over different junctions. Thermal effects on Silicone-on-Glass lenses affect spectral irradiance distributions. A new Photovoltaic Concentrator (CPV), formed by nine optical channels, each one with a Köhler configuration, has been designed to overcome these effects at high concentrations for a large acceptance angle. A Fresnel Lens with a Variable Focal Point is proposed to prevent optical crosstalk in multichannel systems. When integrated into the concentrator, improves the acceptance angle. These designs are designed to fulfill the expected requirements of four junction CPV systems.

Railway Rapid Transit timetables with variable and elastic demand.

This paper focuses on the design of railway timetables considering a variable elastic demand profile along a whole design day. Timetabling is the third stage in the classical hierarchical railway planning process. Most of previous works on this topic consider a uniform demand behavior for short planning intervals. In this paper, we propose a MINLP model for designing non-periodic timetables on a railway corridor where demand is dependent on waiting times. In the elastic demand case, long waiting times lead to a loss of passengers, who may select an alternative transportation mode. The mode choice is modeled using two alternative methods. The first one is based on a sigmoid function and can be used in case of absence of information for competitor modes. In the second one, the mode choice probability is obtained using a Logit model that explicitly considers the existence of a main alternative mode. With the purpose of obtaining optimal departure times, in both cases, a minimization of the loss of passengers is used as objective function. Finally, as illustration, the timetabling MINLP model with both mode choice methods is applied to a real case and computational results are shown.

Puente mixto de canto variable sobre la A-30 en Murcia

El puente mixto sobre la A-30 se engloba dentro de las obras para la construcción de la autovía A-33, que conecta 3 corredores de gran importancia entre el centro peninsular y levante, concretamente la A-31 (Madrid-Alicante), la A-30 (Albacete-Cartagena) y la A-35 (Albacete-Valencia); y permite la conexión entre las autovías A-30 y A-33. Para esta estructura se adoptó una tipología del tablero de viga de canto constante con cartelas de refuerzo sobre apoyos, más propia de puentes de hormigón que de puentes mixtos, para lograr una mayor ligereza y transparencia de la estructura. El canto necesario para salvar el gran vano central derivado del esviaje en el cruce de vías y el estricto gálibo previsto, implican la necesidad de disminuir el peso visual del tablero para equilibrarlo con la luz aparente del vano principal, que es la percibida por los usuarios de la vía, y la reducida altura de pilas.

Designer-driven 3D buildings generated using variable neighborhood search

This paper presents a mechanism to generate virtual buildings considering designer constraints and guidelines. This mechanism is implemented as a pipeline of different Variable Neighborhood Search (VNS) optimization processes in which several subproblems are tackled (1) rooms locations, (2) connectivity graph, and (3) element placement. The core VNS algorithm includes some variants to improve its performance, such as, for example constraint handling and biased operator selection. The optimization process uses a toolkit of construction primitives implemented as "smart objects" providing basic elements such as rooms, doors, staircases and other connectors. The paper also shows experimental results of the application of different designer constraints to a wide range of buildings from small houses to a large castle with several underground levels.

Temporally flat top pulse generation from gain switched semiconductor lasers based on a polarization interferometer with variable transfer function

We propose the use of a polarization based interferometer with variable transfer function for the generation of temporally flat top pulses from gain switched single mode semiconductor lasers. The main advantage of the presented technique is its flexibility in terms of input pulse characteristics, as pulse duration, spectral bandwidth and operating wavelength. Theoretical predictions and experimental demonstrations are presented and the proposed technique is applied to two different semiconductor laser sources emitting in the 1550 nm region. Flat top pulses are successfully obtained with input seed pulses with duration ranging from 40 ps to 100 ps.

Efficient information reconciliation for Continuous-Variable QKD using Non-Binary Low-Density Parity-Check Codes

We present here an information reconciliation method and demonstrate for the first time that it can achieve efficiencies close to 0.98. This method is based on the belief propagation decoding of non-binary LDPC codes over finite (Galois) fields. In particular, for convenience and faster decoding we only consider power-of-two Galois fields.

Derivada parcial de un campo vectorial respecto de una variable escalar

La derivación parcial de un campo vectorial respecto de una variable escalar es discutida en este documento tomando el tiempo como ejemplo sin que ello suponga pérdida de generalidad. Las conclusiones obtenidas de dicho análisis también pueden extrapolarse a escenarios donde se usen otras variables escalares, como la frecuencia en electromagnetismo o la temperatura en termodinámica.

La certificación energética: Las instalaciones como variable

El objetivo de este Trabajo Fin de Grado es adentrarse en el mundo de la certificación energética para comprender la importancia que las instalaciones tienen en este ámbito. Una vez realizada la investigación correspondiente, procederemos a realizar un caso práctico en el que aplicaremos todo lo aprendido y servirá para !ijar conocimientos. Cada día mostramos una mayor preocupación respecto a las emisiones de CO2 que producimos, tanto a nivel nacional como internacional, y buscamos posibles soluciones que puedan mejorar estos niveles de contaminación. Muchas son las acciones que podrían llevarse a cabo a este respecto, sin embargo nosotros focalizaremos nuestra investigación en las instalaciones de los edificios. Previamente, realizamos una incursión sobre temas como el marco normativo de la eficiencia energética, la zonificación climática y la etiqueta energética, los cuales forman la base sobre la que se sustenta este trabajo. Así mismo, realizamos una pequeña exploración en el mundo informático para conocer los diferentes programas de certificación que existen en el mercado. Con una ligera idea de los parámetros que maneja cada uno de ellos, elegimos el programa más adecuado para realizar este caso práctico. Una vez adquiridas estas nociones básicas, realizamos un trabajo minucioso de investigación sobre las diferentes medidas de mejora de la certificación energética de los edificios a través de las instalaciones. La implantación de diferentes sistemas como los paneles solares térmicos, los paneles solares fotovoltaicos, la microcogeneración, las calderas de combustión de alta eficiencia, la caldera de biomasa, la bomba de calor, la incorporación de un recuperador de calor o la mejora de la instalación de iluminación son las diferentes opciones que estudiamos. Todas ellas presentan diferentes características pero persiguen el mismo !in, el ahorro de las emisiones de CO2. Por último, con toda la información de la que disponemos, llevamos a cabo la certificación energética de un edificio terciario y valoramos la posible aplicación de las diferentes mejoras en las instalaciones del mismo. En base a las conclusiones del estudio elegiremos las medidas que mejoren notablemente la calificación energética y que resulten más convenientes para el edificio.

Análisis y Diseño de Algoritmos de Control Discreto de Sistemas MIMO Lineales y No Lineales Aplicando Técnicas de Control de Estructura Variable

Dentro de las técnicas de control de procesos no lineales, los controladores de estructura variable con modos deslizantes (VSC-SM en sus siglas en inglés) han demostrado ser una solución robusta, por lo cual han sido ampliamente estudiados en las cuatro últimas décadas. Desde los años ochenta se han presentado varios trabajos enfocados a especificar controladores VSC aplicados a sistemas de tiempo discreto (DVSC), siendo uno de los mayores intereses de análisis obtener las mismas prestaciones de robustez e invarianza de los controladores VSC-SM. El objetivo principal del trabajo de Tesis Doctoral consiste en estudiar, analizar y proponer unos esquemas de diseño de controladores DVSC en procesos multivariable tanto lineales como no lineales. De dicho estudio se propone una nueva filosofía de diseño de superficies deslizantes estables donde se han considerado aspectos hasta ahora no estudiados en el uso de DVSC-SM como son las limitaciones físicas de los actuadores y la dinámica deslizante no ideal. Lo más novedoso es 1) la propuesta de una nueva metodología de diseño de superficies deslizantes aplicadas a sistemas MIMO lineales y la extensión del mismo al caso de sistemas multivariables no lineales y 2) la definición de una nueva ley de alcance y de una ley de control robusta aplicada a sistemas MIMO, tanto lineales como no lineales, incluyendo un esquema de reducción de chattering. Finalmente, con el fin de ilustrar la eficiencia de los esquemas presentados, se incluyen ejemplos numéricos relacionados con el tema tratado en cada uno de los capítulos de la memoria. ABSTRACT Over the last four decades, variable structure controllers with sliding mode (VSC-SM) have been extensively studied, demonstrating to be a robust solution among robust nonlinear processes control techniques. Since the late 80s, several research works have been focused on the application of VSC controllers applied to discrete time or sampled data systems, which are known as DVSC-SM, where the most extensive source of analysis has been devoted to the robustness and invariance properties of VSC-SM controllers when applied to discrete systems. The main aim of this doctoral thesis work is to study, analyze and propose a design scheme of DVSC-SM controllers for lineal and nonlinear multivariable discrete time processes. For this purpose, a new design philosophy is proposed, where various design features have been considered that have not been analyzed in DVSC design approaches. Among them, the physical limitations and the nonideal dynamic sliding mode dynamics. The most innovative aspect is the inclusion of a new design methodology applied to lineal sliding surfaces MIMO systems and the extension to nonlinear multivariable systems, in addition to a new robust control law applied to lineal and nonlinear MIMO systems, including a chattering reduction scheme. Finally, to illustrate the efficiency of the proposed schemes, several numerical examples applied to lineal and nonlinear systems are included.

Estudio y diseño de elementos acústicos para proporcionar una acústica variable en una sala multifuncional

El objetivo de este proyecto es profundizar en el estudio y diseño de sistemas relacionados con el acondicionamiento acústico para una sala multifuncional. El proyecto se compone de dos partes. Una parte teórica y una parte práctica dónde se aplican los conceptos teóricos aprendidos. La primera parte, está dividida en capítulos en los que se habla de los siguientes temas: Acústica de salas. Para obtener una acústica adecuada en un recinto destinado a varias funciones, se debe contar con una serie de características que lo definan según su uso, por lo que es necesario conocer el tiempo de reverberación y otros parámetros subjetivos para poder caracterizar ese recinto. Materiales para el acondicionamiento acústico, donde se habla de los materiales absorbentes clasificándolos según las frecuencias a las que actúan y de los distintos tipos de difusores. Métodos para conseguir una acústica variable mediante la utilización de elementos físicos variables, citando casos reales de salas multifuncionales. La segunda parte, consiste en la realización de diseños de elementos de acústica variable para una posible utilización en salas polivalentes reales. La herramienta elegida a la hora de la elaboración de estos diseños es el AutoCad. Con esta herramienta se han realizado estos diseños representados en dos y tres dimensiones. ABSTRACT. The objective of this project is to deepen the study and design of systems related to multifunctional room acoustic conditioning. The project is composed of two parts. A theoretical part and a practical part where the learned theoretical concepts are applied. The first part is divided into chapters in which we talk about the following topics: Acoustics of rooms. To obtain proper acoustics in a room intended for various functions, you must have a number of characteristics that define it according to its use, so it is necessary to know the reverberation time and other subjective parameters to characterize the hall. Materials for acoustic conditioning, where we talk about the absorbent materials classified according to frequencies that those materials act and the different types of diffusers. Methods for obtain a variable acoustic by using variable physical elements, mentioning real cases of multi-purpose rooms. The second part deals with designs execution of variable acoustic elements for a possible use in a real multipurpose room. The chosen tool to develop these designs is the AutoCad. These designs have been made with this tool, represented in two and three dimensions.

Analysis of microbial populations in Rusitec fermenters fed diets of variable composition

Fermenters are widely used to study ruminal fermentation, but information on microbial populations developing in fermenters over the incubation period is limited. Four Rusitec fermenters were fed 2 diets representative of those administered to dairy sheep(DAI; 50:50 alfalfa hay:concentrate) and fattening lambs (FAT; 15:85 barley straw:concentrate) in a crossover design with 2 14-d incubation periods to assess the evolution of the microbial populations. There were 4 fermenters per diet.