Comparing fuzzy and intelligent PI controllers in stop-and-go manoeuvres

The aim of this work was twofold: on the one hand, to describe a comparative study of two intelligent control techniques-fuzzy and intelligent proportional-integral (PI) control, and on the other, to try to provide an answer to an as yet unsolved topic in the automotive sector-stop-and-go control in urban environments at very low speeds. Commercial vehicles exhibit nonlinear behavior and therefore constitute an excellent platform on which to check the controllers. This paper describes the design, tuning, and evaluation of the controllers performing actions on the longitudinal control of a car-the throttle and brake pedals-to accomplish stop-and-go manoeuvres. They are tested in two steps. First, a simulation model is used to design and tune the controllers, and second, these controllers are implemented in the commercial vehicle-which has automatic driving capabilities-to check their behavior. A stop-and-go manoeuvre is implemented with the two control techniques using two cooperating vehicles.

Intelligent automatic overtaking system using vision for vehicle detection

There is clear evidence that investment in intelligent transportation system technologies brings major social and economic benefits. Technological advances in the area of automatic systems in particular are becoming vital for the reduction of road deaths. We here describe our approach to automation of one the riskiest autonomous manœuvres involving vehicles – overtaking. The approach is based on a stereo vision system responsible for detecting any preceding vehicle and triggering the autonomous overtaking manœuvre. To this end, a fuzzy-logic based controller was developed to emulate how humans overtake. Its input is information from the vision system and from a positioning-based system consisting of a differential global positioning system (DGPS) and an inertial measurement unit (IMU). Its output is the generation of action on the vehicle’s actuators, i.e., the steering wheel and throttle and brake pedals. The system has been incorporated into a commercial Citroën car and tested on the private driving circuit at the facilities of our research center, CAR, with different preceding vehicles – a motorbike, car, and truck – with encouraging results.

Analyzing energy-efficient configurations in hexapod robots for demining applications

Purpose – Reducing energy consumption in walking robots is an issue of great importance in field applications such as humanitarian demining so as to increase mission time for a given power supply. The purpose of this paper is to address the problem of improving energy efficiency in statically stable walking machines by comparing two leg, insect and mammal, configurations on the hexapod robotic platform SILO6. Design/methodology/approach – Dynamic simulation of this hexapod is used to develop a set of rules that optimize energy expenditure in both configurations. Later, through a theoretical analysis of energy consumption and experimental measurements in the real platform SILO6, a configuration is chosen. Findings – It is widely accepted that the mammal configuration in statically stable walking machines is better for supporting high loads, while the insect configuration is considered to be better for improving mobility. However, taking into account the leg dynamics and not only the body weight, different results are obtained. In a mammal configuration, supporting body weight accounts for 5 per cent of power consumption while leg dynamics accounts for 31 per cent. Originality/value – As this paper demonstrates, the energy expended when the robot walks along a straight and horizontal line is the same for both insect and mammal configurations, while power consumption during crab walking in an insect configuration exceeds power consumption in the mammal configuration.

Control de Tracción en Robots Móviles con Ruedas

En este trabajo se presenta una solución para mejorar el rendimiento de los robots móviles con ruedas que se desplacen sobre superficies con un bajo coeficiente de fricción estática. En estas circunstancias, los robots móviles con ruedas pueden experimentar pérdidas de tracción, y por tanto, sufrir deslizamientos a lo largo de la superficie. La solución descrita propone la utilización de una configuración especial para el robot móvil, en la que todas las ruedas son accionadas de forma independiente, y una estructura de control que consta de tres partes bien diferenciadas: un controlador de seguimiento con realimentación de estado basado en el modelo cinemático del robot, una extensión de la ley de control cinemático resultante para incorporar la dinámica del robot móvil utilizando backstepping, y un algoritmo de distribución de la fuerza de tracción global, que calcula las señales de referencia adecuadas para cada una de las ruedas. Con esta estructura se consigue controlar la posición y la velocidad del robot móvil, y al mismo tiempo, distribuir la fuerza de tracción global entre las ruedas, evitando así el deslizamiento del robot. El funcionamiento de los algoritmos de control es evaluado mediante pruebas experimentales.

Impedance control for legged robots: an insight into the concepts involved

The application of impedance control strategies to modern legged locomotion is analyzed, paying special attention to the concepts behind its implementation which is not straightforward. In order to implement a functional impedance controller for a walking mechanism, the concepts of contact, impact, friction, and impedance have to be merged together. A literature review and a comprehensive analysis are presented compiling all these concepts along with a discussion on position-based versus force-based impedance control approaches, and a theoretical model of a robotic leg in contact with its environment is introduced. A theoretical control scheme for the legs of a general legged robot is also introduced, and some simulations results are presented.

Distributes award protocol: A cooperation and communication method for robots.

In this Master’s Thesis a new Distributed Award Protocol (DAP) for robot communication and cooperation is presented. Task assignment (contract awarding) is done dynamically with contracts assigned to robots based upon the best bid received. Instead of having a manager and a contractor it is proposed a fully distributed bidding/awarding mechanism without a distinguished master. The best bidding robots are awarded with contract for execution. The contractors make decisions locally. This brings the following benefits: no communication bottleneck, low computational power requirement, increased robustness. DAP can handle multitasking. Tasks can be injected into system during the execution of already allocated tasks. As tasks have priorities, in the next cycle after taking into account actual bid parameters of all robots, tasks can be re-allocated. The aim is to minimize a global cost function which is a compromise between cost of task execution and cost of resources usage. Information about tasks and bid values is spread among robots with the use of a Round Robin Route, which is a novel solution proposed in this work. This method allows also identifying failed robots. Such failed robot is eliminated from the list of awarded robots and its replacement is found so the task is still executed by a team. If the failure of a robot was temporary (e.g. communication noise) and the robot can recover, it can again participate in the next bidding/awarding process. Using a bidding/awarding mechanism allows robots to dynamically relocate among tasks. This is also contributes to system robustness. DAP was evaluated through multiple experiments done in the multi-robot simulation system. Various scenarios were tested to check the idea of the main algorithm. Different failures of robots (communication failures, partial hardware malfunctions) were simulated and observations were made regarding how DAP recovers from them. Also the DAP flexibility to environment changes was watched. The experiments in the simulated environment confirmed the above features of DAP.

El crepúsculo de cierta clase de Robots (una perspectiva histórico - científica de la robótica)

En la actualidad hay un total de unos 60.000 robots en todo el mundo,instalados en fábricas, como hemos visto en la empresa Toyota. Su localización es la siguiente: 6.000 robots en Alemania Federal, 3.200 en los Estados Unidos,600 en Suecia, 300 en Francia, 180 en Gran Bretaña, un centenar o menos en media docena de otros países. Y 47.000 en el Japón.

Robots Submarinos: Una Síntesis sobre el Estado Actual de su Investigación y Desarrollo*

Las actividades submarinas requieren de las herramientas necesarias para lograr una provechosa tarea, ya sea en el ámbito industrial, militar o de investigación científica. La tendencia actual para este tipo de actividades, es el uso de Robots Submarinos en diversidad de tareas. En este documento se presenta un breve análisis de los mismos, empezando con su desarrollo, los avances logrados hasta el momento y la tecnología que los envuelve ya sea en posicionamiento X-Y, control, comunicación, diseño y sensores; más adelante se hablará de las actividades y ejemplos de aplicaciones actuales en las que se utilizan robots submarinos, mencionando especialmente los denominados ROVs y sus principales características, así como su forma de operar. En la parte final se aborda el tema del futuro y las perspectivas de la investigación en esta área como por ejemplo el desarrollo en la autonomía y sistemas de comunicación.

Sistema de visión tridimensional recursivo utilizando múltiples vistas de una cámara para control servovisual de robots móviless

Este trabajo presenta un sistema de visión tridimensional utilizando múltiples vistas de una única cámara, para su utilización en el control servovisual de robots móviles. Mediante el sistema de visión propuesto se determinan las dimensiones físicas de un objeto en el espacio de trabajo del robot. Esto permite extender el uso de un controlador, previamente propuesto por los autores, para logar que un robot móvil se posicione respecto de un objeto de dimensiones desconocidas.

Desarrollo y evaluación de un sistema de teleoperación de robots basado en reconocimiento de gestos usando el sensor Kinect

En este Proyecto Fin de Carrera, se presenta un sistema de reconocimiento de gestos para teleoperar robots basado en el sensor Kinect. El proyecto se divide en dos partes, la primera relativa al diseño y evaluación de un sistema de reconocimiento de gestos basado en el sensor Kinect; y la segunda, relativa a la teleoperación de robots usando el sistema de reconocimiento de gestos desarrollado. En la primera parte, se enumeran las características y limitaciones del sensor Kinect. Posteriormente, se analiza la detección de movimiento y se presenta la máquina de estados propuesta para detectar el movimiento de un gesto. A continuación, se explican los posibles preprocesados de un esqueleto en 3 dimensiones para mejorar la detección de gestos y el algoritmo utilizado para la detección de gestos, el algoritmo de Alineamiento Temporal Dinámico (DTW). Por último, se expone con detalle el software desarrollado de reconocimiento y evaluación de gestos, el Evaluador de Gestos, y se realiza un análisis de varias evaluaciones realizadas con distintos perfiles de configuración donde se extraen las conclusiones de acierto, fiabilidad y precisión de cada configuración. En la segunda parte, se expone el sistema de teleoperación del robots y su integración con el evaluador de gestos: este sistema controla el robot Lego Mindstorm mediante la detección de gestos o el reconocimiento de voz. Por último, se exponen las conclusiones finales del proyecto.

Bio-inspired enhancement of reputation systems for intelligent environments

Providing security to the emerging field of ambient intelligence will be difficult if we rely only on existing techniques, given their dynamic and heterogeneous nature. Moreover, security demands of these systems are expected to grow, as many applications will require accurate context modeling. In this work we propose an enhancement to the reputation systems traditionally deployed for securing these systems. Different anomaly detectors are combined using the immunological paradigm to optimize reputation system performance in response to evolving security requirements. As an example, the experiments show how a combination of detectors based on unsupervised techniques (self-organizing maps and genetic algorithms) can help to significantly reduce the global response time of the reputation system. The proposed solution offers many benefits: scalability, fast response to adversarial activities, ability to detect unknown attacks, high adaptability, and high ability in detecting and confining attacks. For these reasons, we believe that our solution is capable of coping with the dynamism of ambient intelligence systems and the growing requirements of security demands.

Aprendizaje en robots sociales: El caso de Urbano

Se presenta el estado actual del proyecto URBANO, que en la versión 8.02 es una arquitectura distribuida de componentes orientada al diseño de aplicaciones en robots sociales. Se utiliza SOAP como mecanismo de integración remota. Se han diseñado nuevos componentes que permiten diferentes formas de aprendizaje. Por un lado, se ha diseñado una aplicación Android que posibilita la integración del móvil o tablet al control del robot. Por otro se ha desarrollado una ontología que permite representar, no solo conceptos, sino el aprendizaje propiamente dicho y se suman a los ya disponibles para la sintetización y reconocimiento de voces, gestión de gestos de cara y brazos, generación de trayectorias y navegación segura, modelo de estado de ánimo del robot y ejecución de tareas definidas por el usuario mediante el lenguaje propio UPL (Urbano Programming Language)

Intelligent Therapy Assistant (ITA) for cognitive rehabilitation in patients with Acquired Brain Injury

This paper presents the design, development and first evaluation of an algorithm, named Intelligent Therapy Assistant (ITA), which automatically selects, configures and schedules rehabilitation tasks for patients with cognitive impairments after an episode of Acquired Brain Injury. The ITA is integrated in "Guttmann, Neuro Personal Trainer" (GNPT), a cognitive tele-rehabilitation platform that provides neuropsychological services.

ExperNet: An Intelligent Multiagent System for WAN Management

This paper describes ExperNet, an intelligent multi-agent system that was developed under an EU funded project to assist in the management of a large-scale data network. ExperNet assists network operators at various nodes of a WAN to detect and diagnose hardware failures and network traffic problems and suggests the most feasible solution, through a web-based interface. ExperNet is composed by intelligent agents, capable of both local problem solving and social interaction among them for coordinating problem diagnosis and repair. The current network state is captured and maintained by conventional network management and monitoring software components, which have been smoothly integrated into the system through sophisticated information exchange interfaces. For the implementation of the agents, a distributed Prolog system enhanced with networking facilities was developed. The agents’ knowledge base is developed in an extensible and reactive knowledge base system capable of handling multiple types of knowledge representation. ExperNet has been developed, installed and tested successfully in an experimental network zone of Ukraine.

Energy Management Module for Mobile Robots in Hostile Environments

In hostile environments at CERN and other similar scientific facilities, having a reliable mobile robot system is essential for successful execution of robotic missions and to avoid situations of manual recovery of the robots in the event that the robot runs out of energy. Because of environmental constraints, such mobile robots are usually battery-powered and hence energy management and optimization is one of the key challenges in this field. The ability to know beforehand the energy consumed by various elements of the robot (such as locomotion, sensors, controllers, computers and communication) will allow flexibility in planning or managing the tasks to be performed by the robot.