Pirolisis y gasificación de biomasas: optimización del proceso de transformación energética mediante distintos sistemas de reacción

Las proyecciones muestran un incremento en la demanda de energía primaria a nivel global para los próximos diez años. Para disminuir los efectos adversos sobre el medio ambiente del uso de combustibles fósiles, las políticas energéticas de España y la Unión Europea tienen como uno de sus objetivos principales incrementar el uso fuentes renovables en la producción energética para el año 2020.La biomasa es una de las principales fuentes renovables para la generación de energía primaria en España. Sin embargo su alto contenido en humedad y su baja densidad energética entre otras características de este material, suponen desventajas para su uso directo como combustible. Los procesos de conversión termoquímica son una alternativa para la obtención de productos sólidos, líquidos y gases de mejor potencial energético utilizando biomasa como materia prima. Esta tesis doctoral tiene como objetivo general el estudio y la optimización de procesos de conversión termoquímica de biomasa. Para cumplir con este objetivo el trabajo combina análisis experimentales y de simulación de distintas tecnologías de transformación termoquímica de biomasa. Antes de iniciar los estudios experimentales de los procesos de transformación termoquímica, se realiza una caracterización química, física y combustible de ocho de biomasas de naturaleza lignocelulósica y amilácea. Esta caracterización incluye el análisis del comportamiento termoquímico utilizando las técnicas de termogravimetría (TG-DTG), TG-FTir y pirólisis analítica (Py-GC/MS). Después de la caracterización se seleccionan tres tipos de biomasas (madera de pino, hueso de aceituna y hueso de aguacate) que son utilizadas como materia prima en el estudio experimental de procesos de gasificación, torrefacción y pirólisis en distintos sistemas de reacción de escala de laboratorio. Estos estudios se realizan para optimizar las condiciones de operación de cada uno de los procesos y caracterizar los productos obtenidos. El trabajo realizado incluye el rediseño y puesta en marcha de un sistema de gasificación de lecho fluidizado así como de un sistema de torrefacción y pirólisis en horno rotatorio. Los estudios experimentales incluyen un análisis de distintas condiciones de operación (temperatura, composición atmosférica, tiempo de residencia, condiciones fluidomecánicas, tamaño de partícula del combustible, condiciones de condensación) con el objetivo de determinar las condiciones óptimas de operación de cada uno de los procesos analizados respecto de las características químicas, físicas y combustibles de los productos. Para la optimización de las condiciones de operación del sistema de gasificación de lecho fluidizado se realiza un análisis complementario del comportamiento hidrodinámico utilizando la metodología de análisis computacional fluidodinámico o mecánica de fluidos computacional (CFD). Los resultados obtenidos permiten determinar las condiciones óptimas de operación del sistema de reacción de lecho fluidizado. Finalmente, la tesis incluye el análisis de una planta comercial de gasificación localizada en Júndiz (Álava, España), centrándose en la caracterización del material particulado eliminado de la corriente de gas generado, con el objetivo de determinar su proceso de formación, características y establecer posibles aplicaciones comerciales.

El efecto de los ungulados silvestres sobre la supervivencia de las plántulas de Quercus pyrenaica: Importancia del matorral no apetecido

Este estudio analiza la supervivencia de las plántulas de rebollo (Quercus pyrenaica) en el Parque Nacional de Cabañeros donde existe una alta densidad de ungulados (ciervos y jabalíes fundamentalmente). Nuestra hipótesis es que la preferencia de los fitófagos ramoneadores por ciertas especies de matorral puede modificar la probabilidad de que una plántula de roble que crece junto al matorral sea dañada. Para ello se plantaron 300 plántulas bajo tres microhábitats: a) bajo matorral no apetecido por cérvidos; b) bajo matorral apetecido y preferido por cérvidos y c) en zonas sin cobertura de matorral. Los resultados del seguimiento de las plántulas desde la primavera (marzo) hasta el otoño (octubre) de 2011 indican que sólo un 19,6% de las plántulas sobrevivieron todo el periodo vegetativo. Un 48,8% de las plántulas sobrevivieron hasta junio, siendo el jabalí el principal responsable de la mortalidad de plántulas durante los primeros meses (marzo y abril), provocando el 83,6% de las muertes. En general, sobrevivieron más plántulas bajo cobertura de matorral (28% de supervivencia) que en claro (3%). Las plántulas bajo matorral apetecido por cérvidos presentaron el menor porcentaje de ataque por jabalí (21%), que sin embargo sufrieron un mayor ataque por cérvidos (51%). Los resultados obtenidos pueden ser de una indudable aplicación para la gestión y conservación de los rebollares y otras formaciones de Quercus sometidas a superpoblación de ungulados.

Interacciones planta-animal en la regeneración de Quercus pyrenaica: ecología y gestión

Los rebollares de Quercus pyrenaica son formaciones casi exclusivas de la península ibérica cuya regeneración sexual se encuentra fuertemente comprometida como consecuencia de su estructura dominada por rebrotes de cepa y raíz (monte bajo). El abandono del aprovechamiento histórico de estos rebrotes (leña, carbón, etc.) ha provocado que, actualmente, muchos rebollares se hayan convertido en ecosistemas degradados con exceso de espesura, puntisecado y estancamiento del crecimiento. Este trabajo trata de resumir el estado del conocimiento de las principales interacciones planta-animal en la regeneración sexual de los bosques dominados por el rebollo, con el fin de proporcionar bases científicas para una mejor gestión y conservación de estos ecosistemas. Algunas especies animales (arrendajo, ratón de campo, trepador azul) juegan un papel importante en la dispersión efectiva de las bellotas, lo que contribuye a un mejor flujo génico y a la colonización de nuevos lugares. Sin embargo, la creciente densidad de ungulados silvestres (ciervo, jabalí, etc.) es uno de los factores de mayor amenaza para estos bosques al reducir drásticamente el número de bellotas disponibles para la germinación y limitar el crecimiento y la supervivencia de las nuevas plántulas. Además, existen interacciones multi-tróficas (p. ej. bellota-predador-dispersor) y fenómenos de facilitación (plántula-matorral) que revelan la importancia de las relaciones múltiples en la regeneración de los rebollares. Finalmente, se exponen posibles medidas de gestión encaminadas a facilitar la regeneración sexual de estos sistemas de manera que pueda revertirse la actual situación de estancamiento y decaimiento de muchos rebollares.

Creating and modelling personal socio-economic networks in on-line banking

The banking industry is observing how new competitors threaten its millennial business model by targeting unbanked people, offering new financial services to their customer base, and even enabling new channels for existing services and customers. The knowledge on users, their behaviour, and expectations become a key asset in this new context. Well aware of this situation, the Center for Open Middleware, a joint technology center created by Santander Bank and Universidad Politécnica de Madrid, has launched a set of initiatives to allow the experimental analysis and management of socio-economic information. PosdataP2P service is one of them, which seeks to model the economic ties between the holders of university smart cards, leveraging on the social networks the holders are subscribed to. In this paper we describe the design principles guiding the development of the system, its architecture and some implementation details.

Evolving a core Banking enterprise architecture: leveraging business events exploitation

Business information has become a critical asset for companies and it has even more value when obtained and exploited in real time. This paper analyses how to integrate this information into an existing banking Enterprise Architecture, following an event-driven approach, and entails the study of three main issues: the definition of business events, the specification of a reference architecture, which identifies the specific integration points, and the description of a governance approach to manage the new elements. All the proposed solutions have been validated with a proof-of-concept test bed in an open source environment. It is based on a case study of the banking sector that allows an operational validation to be carried out, as well as ensuring compliance with non-functional requirements. We have focused these requirements on performance.

Personal data usage management

Personal data about users (customers) is a key component for enterprises and large organizations. Its correct analysis and processing can produce relevant knowledge to achieve different business goals. For example, the monetisation of this data has become a valuable asset for many companies, such as Google, Facebook or Twitter, that obtain huge profits mainly from targeted advertising.

Biomass Gasification in a Fluidized Bed Reactor: Effect of Temperature, Stoichiometric Ratio and Biomass Type

This paper investigates the gasification of two biomass types (pine wood and olive stones) in a laboratory scale bubbling fluidized bed reactor, in order to evaluate comparatively their potential in the production of syngas.

Life cycle assessment of concentrated solar power (CSP) and the influence of hybridising with natural gas

Purpose Concentrating Solar Power (CSP) plants based on parabolic troughs utilize auxiliary fuels (usually natural gas) to facilitate start-up operations, avoid freezing of HTF and increase power output. This practice has a significant effect on the environmental performance of the technology. The aim of this paper is to quantify the sustainability of CSP and to analyse how this is affected by hybridisation with different natural gas (NG) inputs. Methods A complete Life Cycle (LC) inventory was gathered for a commercial wet-cooled 50 MWe CSP plant based on parabolic troughs. A sensitivity analysis was conducted to evaluate the environmental performance of the plant operating with different NG inputs (between 0 and 35% of gross electricity generation). ReCiPe Europe (H) was used as LCA methodology. CML 2 baseline 2000 World and ReCiPe Europe E were used for comparative purposes. Cumulative Energy Demands (CED) and Energy Payback Times (EPT) were also determined for each scenario. Results and discussion Operation of CSP using solar energy only produced the following environmental profile: climate change 26.6 kg CO2 eq/KWh, human toxicity 13.1 kg 1,4-DB eq/KWh, marine ecotoxicity 276 g 1,4-DB eq/KWh, natural land transformation 0.005 m2/KWh, eutrophication 10.1 g P eq/KWh, acidification 166 g SO2 eq/KWh. Most of these impacts are associated with extraction of raw materials and manufacturing of plant components. The utilization NG transformed the environmental profile of the technology, placing increasing weight on impacts related to its operation and maintenance. Significantly higher impacts were observed on categories like climate change (311 kg CO2 eq/MWh when using 35 % NG), natural land transformation, terrestrial acidification and fossil depletion. Despite its fossil nature, the use of NG had a beneficial effect on other impact categories (human and marine toxicity, freshwater eutrophication and natural land transformation) due to the higher electricity output achieved. The overall environmental performance of CSP significantly deteriorated with the use of NG (single score 3.52 pt in solar only operation compared to 36.1 pt when using 35 % NG). Other sustainability parameters like EPT and CED also increased substantially as a result of higher NG inputs. Quasilinear second-degree polynomial relationships were calculated between various environmental performance parameters and NG contributions. Conclusions Energy input from auxiliary NG determines the environmental profile of the CSP plant. Aggregated analysis shows a deleterious effect on the overall environmental performance of the technology as a result of NG utilization. This is due primarily to higher impacts on environmental categories like climate change, natural land transformation, fossil fuel depletion and terrestrial acidification. NG may be used in a more sustainable and cost-effective manner in combined cycle power plants, which achieve higher energy conversion efficiencies.

Environmental analysis of a Concentrated Solar Power (CSP) plant hybridised with different fossil and renewable fuels

The environmental performance of a 50 MW parabolic trough Concentrated Solar Power (CSP) plant hybridised with different fuels was determined using a Life Cycle Assessment methodology. Six different scenarios were investigated, half of which involved hybridisation with fossil fuels (natural gas, coal and fuel oil), and the other three involved hybridisation with renewable fuels (wheat straw, wood pellets and biogas). Each scenario was compared to a solar-only operation. Nine different environmental categories as well as the Cumulative Energy Demand and the Energy Payback Time (EPT) were evaluated using Simapro software for 1 MWh of electricity produced. The results indicate a worse environmental performance for a CSP plant producing 12% of the electricity from fuel than in a solar-only operation for every indicator, except for the eutrophication and toxicity categories, whose results for the natural gas scenario are slightly better. In the climate change category, the results ranged between 26.9 and 187 kg CO2 eq/MWh, where a solar-only operation had the best results and coal hybridisation had the worst. Considering a weighted single score indicator, the environmental impact of the renewable fuels scenarios is approximately half of those considered in fossil fuels, with the straw scenario showing the best results, and the coal scenario the worstones. EPT for solar-only mode is 1.44 years, while hybridisation scenarios EPT vary in a range of 1.72 -1.83 years for straw and pellets respectively. The fuels with more embodied energy are biomethane and wood pellets.

Hybridizing concentrated solar power (CSP) with biogas and biomethane as an alternative to natural gas: Analysis of environmental performance using LCA

Concentrating Solar Power (CSP) plants typically incorporate one or various auxiliary boilers operating in parallel to the solar field to facilitate start up operations, provide system stability, avoid freezing of heat transfer fluid (HTF) and increase generation capacity. The environmental performance of these plants is highly influenced by the energy input and the type of auxiliary fuel, which in most cases is natural gas (NG). Replacing the NG with biogas or biomethane (BM) in commercial CSP installations is being considered as a means to produce electricity that is fully renewable and free from fossil inputs. Despite their renewable nature, the use of these biofuels also generates environmental impacts that need to be adequately identified and quantified. This paper investigates the environmental performance of a commercial wet-cooled parabolic trough 50 MWe CSP plant in Spain operating according to two strategies: solar-only, with minimum technically viable energy non-solar contribution; and hybrid operation, where 12 % of the electricity derives from auxiliary fuels (as permitted by Spanish legislation). The analysis was based on standard Life Cycle Assessment (LCA) methodology (ISO 14040-14040). The technical viability and the environmental profile of operating the CSP plant with different auxiliary fuels was evaluated, including: NG; biogas from an adjacent plant; and BM withdrawn from the gas network. The effect of using different substrates (biowaste, sewage sludge, grass and a mix of biowaste with animal manure) for the production of the biofuels was also investigated. The results showed that NG is responsible for most of the environmental damage associated with the operation of the plant in hybrid mode. Replacing NG with biogas resulted in a significant improvement of the environmental performance of the installation, primarily due to reduced impact in the following categories: natural land transformation, depletion of fossil resources, and climate change. However, despite the renewable nature of the biofuels, other environmental categories like human toxicity, eutrophication, acidification and marine ecotoxicity scored higher when using biogas and BM.

Approaching unbanked people: a person-to-person payment application on Facebook

More than 2.5 billion people are still unbanked and they do not access or use financial services. In this paper, we present an innovative service that allows Santander University Smart Card holders to make person-to-person payments to their friends, using different social channels, such as Telegram, Facebook or Twitter. Our first implementation is based on Facebook, one of the most used social networks. This approach allows the service to reach a great number of potential users but the delivery and stability of the service depends on an external provider. We include the description of the service architecture, its implementation, tests, and the lessons learned from the development. We also discuss pros and cons of the third party service dependency from the technical and business viewpoints.

Extracting knowledge through friendsourcing: application to new financial services

Personalization has become a key factor for the success of new ICT services. However, the personal information required is not always available in a single site, but scattered in heterogeneous sources, and extracting knowledge from raw information is not an easy job. As a result, many organizations struggle to obtain knowledge on their users useful enough for their business purposes. This paper introduces a comprehensive personal data framework that opens the knowledge extraction process up to collaboration by the involvement of new actors, while enabling users to monitor and control it. The contributions have been validated in a financial services scenario where socioeconomic knowledge on some users is generated by tapping into their social network and used to assists them in raising money from their friends.

A proposal for enhancing the motivation in students of computer programming

Computer programming is known to be one of the most difficult courses for students in the first year of engineering. They are faced with the challenge of abstract thinking and gaining programming skills for the first time. These skills are acquired by continuous practicing from the start of the course. In order to enhance the motivation and dynamism of the learning and assessment processes, we have proposed the use of three educational resources namely screencasts, self-assessment questionnaires and automated grading of assignments. These resources have been made available in Moodle which is a Learning Management System widely used in education environments and adopted by the Telecommunications Engineering School at the Universidad Politécnica de Madrid (UPM). Both teachers and students can enhance the learning and assessment processes through the use of new educational activities such as self-assessment questionnaires and automated grading of assignments. On the other hand, multimedia resources such as screencasts can guide students in complex topics. The resources proposed allow teachers to improve their tutorial actions since they provide immediate feedback and comments to students without the enormous effort of manual correction and evaluation by teachers specially taking into account the large number of students enrolled in the course. In this paper we present the case study where three proposed educational resources were applied. We describe the special features of the course and explain why the use of these resources can both enhance the students? motivation and improve the teaching and learning processes. Our research work was carried out on students attending the "Computer programming" course offered in the first year of a Telecommunications Engineering degree at UPM. This course is mandatory and has more than 450 enrolled students. Our purpose is to encourage the motivation and dynamism of the learning and assessment processes.

A personal data framework for exchanging knowledge about users in new financial services

Personal data is a key asset for many companies, since this is the essence in providing personalized services. Not all companies, and specifically new entrants to the markets, have the opportunity to access the data they need to run their business. In this paper, we describe a comprehensive personal data framework that allows service providers to share and exchange personal data and knowledge about users, while facilitating users to decide who can access which data and why. We analyze the challenges related to personal data collection, integration, retrieval, and identity and privacy management, and present the framework architecture that addresses them. We also include the validation of the framework in a banking scenario, where social and financial data is collected and properly combined to generate new socio-economic knowledge about users that is then used by a personal lending service.

Arquitectura y modelo de referencia para un ecosistema de intercambio de datos personales centrado en el usuario

Los servicios telemáticos han transformando la mayoría de nuestras actividades cotidianas y ofrecen oportunidades sin precedentes con características como, por ejemplo, el acceso ubicuo, la disponibilidad permanente, la independencia del dispositivo utilizado, la multimodalidad o la gratuidad, entre otros. No obstante, los beneficios que destacan en cuanto se reflexiona sobre estos servicios, tienen como contrapartida una serie de riesgos y amenazas no tan obvios, ya que éstos se nutren de y tratan con datos personales, lo cual suscita dudas respecto a la privacidad de las personas. Actualmente, las personas que asumen el rol de usuarios de servicios telemáticos generan constantemente datos digitales en distintos proveedores. Estos datos reflejan parte de su intimidad, de sus características particulares, preferencias, intereses, relaciones sociales, hábitos de consumo, etc. y lo que es más controvertido, toda esta información se encuentra bajo la custodia de distintos proveedores que pueden utilizarla más allá de las necesidades y el control del usuario. Los datos personales y, en particular, el conocimiento sobre los usuarios que se puede extraer a partir de éstos (modelos de usuario) se han convertido en un nuevo activo económico para los proveedores de servicios. De este modo, estos recursos se pueden utilizar para ofrecer servicios centrados en el usuario basados, por ejemplo, en la recomendación de contenidos, la personalización de productos o la predicción de su comportamiento, lo cual permite a los proveedores conectar con los usuarios, mantenerlos, involucrarlos y en definitiva, fidelizarlos para garantizar el éxito de un modelo de negocio. Sin embargo, dichos recursos también pueden utilizarse para establecer otros modelos de negocio que van más allá de su procesamiento y aplicación individual por parte de un proveedor y que se basan en su comercialización y compartición con otras entidades. Bajo esta perspectiva, los usuarios sufren una falta de control sobre los datos que les refieren, ya que esto depende de la voluntad y las condiciones impuestas por los proveedores de servicios, lo cual implica que habitualmente deban enfrentarse ante la disyuntiva de ceder sus datos personales o no acceder a los servicios telemáticos ofrecidos. Desde el sector público se trata de tomar medidas que protejan a los usuarios con iniciativas y legislaciones que velen por su privacidad y que aumenten el control sobre sus datos personales, a la vez que debe favorecer el desarrollo económico propiciado por estos proveedores de servicios. En este contexto, esta tesis doctoral propone una arquitectura y modelo de referencia para un ecosistema de intercambio de datos personales centrado en el usuario que promueve la creación, compartición y utilización de datos personales y modelos de usuario entre distintos proveedores, al mismo tiempo que ofrece a los usuarios las herramientas necesarias para ejercer su control en cuanto a la cesión y uso de sus recursos personales y obtener, en su caso, distintos incentivos o contraprestaciones económicas. Las contribuciones originales de la tesis son la especificación y diseño de una arquitectura que se apoya en un proceso de modelado distribuido que se ha definido en el marco de esta investigación. Éste se basa en el aprovechamiento de recursos que distintas entidades (fuentes de datos) ofrecen para generar modelos de usuario enriquecidos que cubren las necesidades específicas de terceras entidades, considerando la participación del usuario y el control sobre sus recursos personales (datos y modelos de usuario). Lo anterior ha requerido identificar y caracterizar las fuentes de datos con potencial de abastecer al ecosistema, determinar distintos patrones para la generación de modelos de usuario a partir de datos personales distribuidos y heterogéneos y establecer una infraestructura para la gestión de identidad y privacidad que permita a los usuarios expresar sus preferencias e intereses respecto al uso y compartición de sus recursos personales. Además, se ha definido un modelo de negocio de referencia que sustenta las investigaciones realizadas y que ha sido particularizado en dos ámbitos de aplicación principales, en concreto, el sector de publicidad en redes sociales y el sector financiero para la implantación de nuevos servicios. Finalmente, cabe destacar que las contribuciones de esta tesis han sido validadas en el contexto de distintos proyectos de investigación industrial aplicada y también en el marco de proyectos fin de carrera que la autora ha tutelado o en los que ha colaborado. Los resultados obtenidos han originado distintos méritos de investigación como dos patentes en explotación, la publicación de un artículo en una revista con índice de impacto y diversos artículos en congresos internacionales de relevancia. Algunos de éstos han sido galardonados con premios de distintas instituciones, así como en las conferencias donde han sido presentados. ABSTRACT Information society services have changed most of our daily activities, offering unprecedented opportunities with certain characteristics, such as: ubiquitous access, permanent availability, device independence, multimodality and free-of-charge services, among others. However, all the positive aspects that emerge when thinking about these services have as counterpart not-so-obvious threats and risks, because they feed from and use personal data, thus creating concerns about peoples’ privacy. Nowadays, people that play the role of user of services are constantly generating digital data in different service providers. These data reflect part of their intimacy, particular characteristics, preferences, interests, relationships, consumer behavior, etc. Controversy arises because this personal information is stored and kept by the mentioned providers that can use it beyond the user needs and control. Personal data and, in particular, the knowledge about the user that can be obtained from them (user models) have turned into a new economic asset for the service providers. In this way, these data and models can be used to offer user centric services based, for example, in content recommendation, tailored-products or user behavior, all of which allows connecting with the users, keeping them more engaged and involved with the provider, finally reaching customer loyalty in order to guarantee the success of a business model. However, these resources can be used to establish a different kind of business model; one that does not only processes and individually applies personal data, but also shares and trades these data with other entities. From that perspective, the users lack control over their referred data, because it depends from the conditions imposed by the service providers. The consequence is that the users often face the following dilemma: either giving up their personal data or not using the offered services. The Public Sector takes actions in order to protect the users approving, for example, laws and legal initiatives that reinforce privacy and increase control over personal data, while at the same time the authorities are also key players in the economy development that derives from the information society services. In this context, this PhD Dissertation proposes an architecture and reference model to achieve a user-centric personal data ecosystem that promotes the creation, sharing and use of personal data and user models among different providers, while offering users the tools to control who can access which data and why and if applicable, to obtain different incentives. The original contributions obtained are the specification and design of an architecture that supports a distributed user modelling process defined by this research. This process is based on leveraging scattered resources of heterogeneous entities (data sources) to generate on-demand enriched user models that fulfill individual business needs of third entities, considering the involvement of users and the control over their personal resources (data and user models). This has required identifying and characterizing data sources with potential for supplying resources, defining different generation patterns to produce user models from scattered and heterogeneous data, and establishing identity and privacy management infrastructures that allow users to set their privacy preferences regarding the use and sharing of their resources. Moreover, it has also been proposed a reference business model that supports the aforementioned architecture and this has been studied for two application fields: social networks advertising and new financial services. Finally, it has to be emphasized that the contributions obtained in this dissertation have been validated in the context of several national research projects and master thesis that the author has directed or has collaborated with. Furthermore, these contributions have produced different scientific results such as two patents and different publications in relevant international conferences and one magazine. Some of them have been awarded with different prizes.