Impacts and adaptive capacity as drivers for prioritizing agricultural adaptation to climate change in Europe

In the face of likely climate change impacts policy makers at different spatial scales need access to assessment tools that enable informed policy instruments to be designed. Recent scientific advances have facilitated the development of improved climate projections, but it remains to be seen whether these are translated into effective adaptation strategies. This paper uses existing databases on climate impacts on European agriculture and combines them with an assessment of adaptive capacity to develop an interdisciplinary approach for prioritising policies. It proposes a method for identifying relevant policies for different EU countries that are representative of various agroclimatic zones. Our analysis presents a framework for integrating current knowledge of future climate impacts with an understanding of the underlying socio-economic, agricultural and environmental traits that determine a region’s capacity for adapting to climate change.

Territory and the governmentalisation of social reproduction: parliamentary enclosure and spatial rationalities in the transition from feudalism to capitalism

Recent applications of Foucauldian categories in geography, spatial history and the history of town planning have opened up interesting new perspectives, with respect to both the evolution of spatial knowledge and the genealogy of territorial techniques and their relation to larger socio-political projects, that would be enriched if combined with other discursive traditions. This article proposes to conceptualise English parliamentary enclosureea favourite episode for Marxist historiography, frequently read in a strictly materialist fashioneas a precedent of a new form of sociospatial governmentality, a political technology that inaugurates a strategic manipulation of territory for social change on the threshold between feudal and capitalist spatial rationalities. I analyse the sociospatial dimensions of parliamentary enclosure’s technical and legal innovations and compare them to the forms of communal self-regulation of land use customs and everyday regionalisations that preceded it. Through a systematic, replicable mechanism of reterritorialisation, enclosure acts normalised spatial regulations, blurred regional differences in the social organisation of agriculture and erased the modes of autonomous social reproduction linked to common land. Their exercise of dispossession of material resources, social capital and community representations is interpreted therefore as an inaugural logic that would pervade the emergent spatial rationality later known as planning.

Estrategias innovadoras para la gestión del riesgo de sequía en sistemas ganaderos extensivos

La vulnerabilidad de los sistemas ganaderos de pastoreo pone en evidencia la necesidad de herramientas para evaluar y mitigar los efectos de la sequía. El avance en la teledetección ha despertado el interés por explotar potenciales aplicaciones, y está dando lugar a un intenso desarrollo de innovaciones en distintos campos. Una de estas áreas es la gestión del riesgo climático, en donde la utilización de índices de vegetación permite la evaluación de la sequía. En esta investigación, se analiza el impacto de la sequía y se evalúa el potencial de nuevas tecnologías como la teledetección para la gestión del riesgo de sequía en sistemas de ganadería extensiva. Para ello, se desarrollan tres aplicaciones: (i) evaluar el impacto económico de la sequía en una explotación ganadera extensiva de la dehesa de Andalucía, (ii) elaborar mapas de vulnerabilidad a la sequía en pastos de Chile y (iii) diseñar y evaluar el potencial de un seguro indexado para sequía en pastos en la región de Coquimbo en Chile. En la primera aplicación, se diseña un modelo dinámico y estocástico que integra aspectos climáticos, ecológicos, agronómicos y socioeconómicos para evaluar el riesgo de sequía. El modelo simula una explotación ganadera tipo de la dehesa de Andalucía para el período 1999-2010. El método de Análisis Histórico y la simulación de MonteCarlo se utilizan para identificar los principales factores de riesgo de la explotación, entre los que destacan, los periodos de inicios del verano e inicios de invierno. Los resultados muestran la existencia de un desfase temporal entre el riesgo climático y riesgo económico, teniendo este último un periodo de duración más extenso en el tiempo. También, revelan que la intensidad, frecuencia y duración son tres atributos cruciales que determinan el impacto económico de la sequía. La estrategia de reducción de la carga ganadera permite aminorar el riesgo, pero conlleva una disminución en el margen bruto de la explotación. La segunda aplicación está dedicada a la elaboración de mapas de vulnerabilidad a la sequia en pastos de Chile. Para ello, se propone y desarrolla un índice de riesgo económico (IRESP) sencillo de interpretar y replicable, que integra factores de riesgo y estrategias de adaptación para obtener una medida del Valor en Riesgo, es decir, la máxima pérdida esperada en un año con un nivel de significación del 5%.La representación espacial del IRESP pone en evidencia patrones espaciales y diferencias significativas en la vulnerabilidad a la sequía a lo largo de Chile. Además, refleja que la vulnerabilidad no siempre esta correlacionada con el riesgo climático y demuestra la importancia de considerar las estrategias de adaptación. Las medidas de autocorrelación espacial revelan que el riesgo sistémico es considerablemente mayor en el sur que en el resto de zonas. Los resultados demuestran que el IRESP transmite información pertinente y, que los mapas de vulnerabilidad pueden ser una herramienta útil en el diseño de políticas y toma de decisiones para la gestión del riesgo de sequía. La tercera aplicación evalúa el potencial de un seguro indexado para sequía en pastos en la región de Coquimbo en Chile. Para lo cual, se desarrolla un modelo estocástico para estimar la prima actuarialmente justa del seguro y se proponen y evalúan pautas alternativas para mejorar el diseño del contrato. Se aborda el riesgo base, el principal problema de los seguros indexados identificado en la literatura y, que está referido a la correlación imperfecta del índice con las pérdidas de la explotación. Para ello, se sigue un enfoque bayesiano que permite evaluar el impacto en el riesgo base de las pautas de diseño propuestas: i) una zonificación por clúster que considera aspectos espacio-temporales, ii) un período de garantía acotado a los ciclos fenológicos del pasto y iii) umbral de garantía. Los resultados muestran que tanto la zonificación como el periodo de garantía reducen el riesgo base considerablemente. Sin embargo, el umbral de garantía tiene un efecto ambiguo sobre el riesgo base. Por otra parte, la zonificación por clúster contribuye a aminorar el riesgo sistémico que enfrentan las aseguradoras. Estos resultados han puesto de manifiesto que un buen diseño de contrato puede tener un doble dividendo, por un lado aumentar su utilidad y, por otro, reducir el coste del seguro. Un diseño de contrato eficiente junto con los avances en la teledetección y un adecuado marco institucional son los pilares básicos para el buen funcionamiento de un programa de seguro. Las nuevas tecnologías ofrecen un importante potencial para la innovación en la gestión del riesgo climático. Los avances en este campo pueden proporcionar importantes beneficios sociales en los países en desarrollo y regiones vulnerables, donde las herramientas para gestionar eficazmente los riesgos sistémicos como la sequía pueden ser de gran ayuda para el desarrollo. The vulnerability of grazing livestock systems highlights the need for tools to assess and mitigate the adverse impact of drought. The recent and rapid progress in remote sensing has awakened an interest for tapping into potential applications, triggering intensive efforts to develop innovations in a number of spheres. One of these areas is climate risk management, where the use of vegetation indices facilitates assessment of drought. This research analyzes drought impacts and evaluates the potential of new technologies such as remote sensing to manage drought risk in extensive livestock systems. Three essays in drought risk management are developed to: (i) assess the economic impact of drought on a livestock farm in the Andalusian Dehesa, (ii) build drought vulnerability maps in Chilean grazing lands, and (iii) design and evaluate the potential of an index insurance policy to address the risk of drought in grazing lands in Coquimbo, Chile. In the first essay, a dynamic and stochastic farm model is designed combining climate, agronomic, socio-economic and ecological aspects to assess drought risk. The model is developed to simulate a representative livestock farm in the Dehesa of Andalusia for the time period 1999-2010. Burn analysis and MonteCarlo simulation methods are used to identify the significance of various risk sources at the farm. Most notably, early summer and early winter are identified as periods of peak risk. Moreover, there is a significant time lag between climate and economic risk and this later last longer than the former. It is shown that intensity, frequency and duration of the drought are three crucial attributes that shape the economic impact of drought. Sensitivity analysis is conducted to assess the sustainability of farm management strategies and demonstrates that lowering the stocking rate reduces farmer exposure to drought risk but entails a reduction in the expected gross margin. The second essay, mapping drought vulnerability in Chilean grazing lands, proposes and builds an index of economic risk (IRESP) that is replicable and simple to interpret. This methodology integrates risk factors and adaptation strategies to deliver information on Value at Risk, maximum expected losses at 5% significance level. Mapping IRESP provides evidence about spatial patterns and significant differences in drought vulnerability across Chilean grazing lands. Spatial autocorrelation measures reveal that systemic risk is considerably larger in the South as compared to Northern or Central Regions. Furthermore, it is shown that vulnerability is not necessarily correlated with climate risk and that adaptation strategies do matter. These results show that IRESP conveys relevant information and that vulnerability maps may be useful tools to assess policy design and decision-making in drought risk management. The third essay develops a stochastic model to estimate the actuarially fair premium and evaluates the potential of an indexed insurance policy to manage drought risk in Coquimbo, a relevant livestock farming region of Chile. Basis risk refers to the imperfect correlation of the index and farmer loses and is identified in the literature as a main limitation of index insurance. A Bayesian approach is proposed to assess the impact on basis risk of alternative guidelines in contract design: i) A cluster zoning that considers space-time aspects, ii) A guarantee period bounded to fit phenological cycles, and iii) the triggering index threshold. Results show that both the proposed zoning and guarantee period considerably reduces basis risk. However, the triggering index threshold has an ambiguous effect on basis risk. On the other hand, cluster zoning contributes to ameliorate systemic risk faced by the insurer. These results highlighted that adequate contract design is important and may result in double dividend. On the one hand, increasing farmers’ utility and, secondly, reducing the cost of insurance. An efficient contract design coupled with advances in remote sensing and an appropriate institutional framework are the basis for an efficient operation of an insurance program. The new technologies offer significant potential for innovation in climate risk managements. Progress in this field is capturing increasing attention and may provide important social gains in developing countries and vulnerable regions where the tools to efficiently manage systemic risks, such as drought, may be a means to foster development.

Methodology for reconstructing early zebrafish development from in vivo multiphoton microscopy

Investigating cell dynamics during early zebrafish embryogenesis requires specific image acquisition and analysis strategies. Multiharmonic microscopy, i.e., second- and third-harmonic generations, allows imaging cell divisions and cell membranes in unstained zebrafish embryos from 1- to 1000-cell stage. This paper presents the design and implementation of a dedicated image processing pipeline (tracking and segmentation) for the reconstruction of cell dynamics during these developmental stages. This methodology allows the reconstruction of the cell lineage tree including division timings, spatial coordinates, and cell shape until the 1000-cell stage with minute temporal accuracy and micrometer spatial resolution. Data analysis of the digital embryos provides an extensive quantitative description of early zebrafish embryogenesis.

Spatial effects on rural commerce

Commerce in rural territories should not be considered as a needed service, but as a basic infrastructure, that impact not only existent population, but also tourism, and rural industrialization. So, the rural areas need not only agriculture but industry and services, to have a global and balanced development, including for the countryside and the population. In the work presented in this paper, we are considering the formulation of the direct relation between population and the endowment of commerce sites within a geographical territory, the ?area of commercial interactions?. These are the closer set of towns that can gravitate to each other to cover the required needs for the populations within the area. The products retailed, range from basic products for the daily lives, to all other products for industry, agriculture, and services. The econometric spatial model developed to evaluate the interactions and estimate the parameters, is based on the Spatial Error Model, which allows for other spatial hidden effects to be considered without direct interference to the commercial disposition. The data and territory used to test the model correspond to a rural area in the Spanish Palencia territory (NUTS-3 level). The parameters have dependence from population levels, local rent per head, local and regional government budgets, and particular spatial restrictions. Interesting results are emerging form the model. The more significant is that the spatial effects can replace some number of commerce sites in towns, given the right spatial distribution of the sites and the towns. This is equivalent to consider the area of commercial interactions as the unit of measurement for the basic infrastructure and not only the towns.

Emission inventories and modeling requirements for the development of air quality plans. Application to Madrid (Spain)

Modeling is an essential tool for the development of atmospheric emission abatement measures and air quality plans. Most often these plans are related to urban environments with high emission density and population exposure. However, air quality modeling in urban areas is a rather challenging task. As environmental standards become more stringent (e.g. European Directive 2008/50/EC), more reliable and sophisticated modeling tools are needed to simulate measures and plans that may effectively tackle air quality exceedances, common in large urban areas across Europe, particularly for NO2. This also implies that emission inventories must satisfy a number of conditions such as consistency across the spatial scales involved in the analysis, consistency with the emission inventories used for regulatory purposes and versatility to match the requirements of different air quality and emission projection models. This study reports the modeling activities carried out in Madrid (Spain) highlighting the atmospheric emission inventory development and preparation as an illustrative example of the combination of models and data needed to develop a consistent air quality plan at urban level. These included a series of source apportionment studies to define contributions from the international, national, regional and local sources in order to understand to what extent local authorities can enforce meaningful abatement measures. Moreover, source apportionment studies were conducted in order to define contributions from different sectors and to understand the maximum feasible air quality improvement that can be achieved by reducing emissions from those sectors, thus targeting emission reduction policies to the most relevant activities. Finally, an emission scenario reflecting the effect of such policies was developed and the associated air quality was modeled.

Urbanization, socio-economic changes and population growth in Brazil: dietary shifts and environmental implications.

Population growth, economic globalization, improving living standards and urbanization are causing important changes in the global food system and modifying the dietary habits in many parts of the world (Molden, 2007; Godfray et al., 2010). The nutritional transition (linked to the development of countries and the increasing wealth of its population) implies a shift away from traditional staple food such as roots and tuber vegetables and a rise in consumption of meat and milk products, refined and processed foods, as well as sugars, oils and fats (Ambler-Edwards et al., 2009). The contemporary food system puts significant pressure on natural resources, especially on land and water, because the growing food demand pushes the agricultural frontier beyond, causing large impacts on ecosystems (Ambler-Edwards et al. 2009: 11-18). Also, the trend towards richer diets in animal proteins and processed food adds further pressure on the environment, since it requires larger amount of water and land to be produced (Allan, 2011; Mekonnen and Hoekstra, 2012).

Supporting decision making under uncertainty: Development of a participatory integrated model for water management in the middle Guadiana river basin.

Following the Integrated Water Resources Management approach, the European Water Framework Directive demands Member States to develop water management plans at the catchment level. Those plans have to integrate the different interests and must be developed with stakeholder participation. To face these requirements, managers need tools to assess the impacts of possible management alternatives on natural and socio-economic systems. These tools should ideally be able to address the complexity and uncertainties of the water system, while serving as a platform for stakeholder participation. The objective of our research was to develop a participatory integrated assessment model, based on the combination of a crop model, an economic model and a participatory Bayesian network, with an application in the middle Guadiana sub-basin, in Spain. The methodology is intended to capture the complexity of water management problems, incorporating the relevant sectors, as well as the relevant scales involved in water management decision making. The integrated model has allowed us testing different management, market and climate change scenarios and assessing the impacts of such scenarios on the natural system (crops), on the socio-economic system (farms) and on the environment (water resources). Finally, this integrated assessment modelling process has allowed stakeholder participation, complying with the main requirements of current European water laws.

Territory and the governmentalisation of social reproduction: parliamentary enclosure and spatial rationalities in the transition from feudalism to capitalism

Recent applications of Foucauldian categories in geography, spatial history and the history of town planning have opened up interesting new perspectives, with respect to both the evolution of spatial knowledge and the genealogy of territorial techniques and their relation to larger socio-political projects, that would be enriched if combined with other discursive traditions. This article proposes to conceptualise English parliamentary enclosureea favourite episode for Marxist historiography, frequently read in a strictly materialist fashioneas a precedent of a new form of sociospatial governmentality, a political technology that inaugurates a strategic manipulation of territory for social change on the threshold between feudal and capitalist spatial rationalities. I analyse the sociospatial dimensions of parliamentary enclosure’s technical and legal innovations and compare them to the forms of communal self-regulation of land use customs and everyday regionalisations that preceded it. Through a systematic, replicable mechanism of reterritorialisation, enclosure acts normalised spatial regulations, blurred regional differences in the social organisation of agriculture and erased the modes of autonomous social reproduction linked to common land. Their exercise of dispossession of material resources, social capital and community representations is interpreted therefore as an inaugural logic that would pervade the emergent spatial rationality later known as planning.

New concepts and techniques for the development of high-efficiency concentrating photovoltaic modules

El interés por los sistemas fotovoltaicos de concentración (CPV) ha resurgido en los últimos años amparado por el desarrollo de células multiunión de muy alta eficiencia basadas en semiconductores de los grupos III-V. Estas células han permitido obtener módulos de concentración con eficiencias que prácticamente duplican las del panel plano y que llegan al 35% en los módulos récord. Esta tesis está dedicada al diseño y la implementación experimental de nuevos conceptos que permitan obtener módulos CPV que no sólo alcancen una eficiencia alta en condiciones estándar sino que, además, sean lo suficientemente tolerantes a errores de montaje, seguimiento, temperatura y variaciones espectrales para que la energía que producen a lo largo del año sea máxima. Una de las primeras cuestiones que se abordan es el diseño de elementos ópticos secundarios para sistemas cuyo primario es una lente de Fresnel y que permiten, para una concentración fija, aumentar el ángulo de aceptancia y la tolerancia del sistema. Varios secundarios reflexivos y refractivos han sido diseñados y analizados mediante trazado de rayos. En particular, utilizando óptica anidólica y basándose en el diseño de una sola etapa conocido como ‘concentrador dieléctrico que funciona por reflexión total interna‘, se ha diseñado, fabricado y caracterizado un secundario con salida cuadrada que, usado junto con una lente de Fresnel, permite alcanzar simultáneamente una elevada eficiencia, concentración y aceptancia. Además, se ha propuesto y prototipado un método alternativo de fabricación para otro de los secundarios, denominado domo, consistente en el sobremoldeo de silicona sobre células solares. Una de las características que impregna todo el trabajo realizado en esta tesis es la aproximación holística en el diseño de módulos CPV, es decir, se ha prestado especial atención al diseño conjunto de la célula y la óptica para garantizar que el sistema total alcance la mayor eficiencia posible. En este sentido muchos sistemas ópticos desarrollados en esta tesis han sido diseñados, caracterizados y optimizados teniendo en cuenta que el ajuste de corriente entre las distintas subcélulas que comprenden la célula multiunión bajo el concentrador sea muy próximo a uno. La capa antirreflectante sobre la célula funciona, en cierto modo, como interfaz entre la óptica y la célula, por lo que se ha diseñado un método de optimización de capas antirreflectantes que considera no sólo el amplio rango de longitudes de onda para el que las células multiunión son sensibles sino también la distribución angular de intensidad sobre la célula creada por la óptica de concentración. Además, la cuestión de la falta de uniformidad también se ha abordado mediante la comparación de las distribuciones espectrales y espaciales de irradiancia que crean diferentes ópticas (simuladas mediante trazado de rayos y fotografiadas) y las pérdidas de eficiencia que experimentan las células iluminadas por dichas ópticas de concentración medidas experimentalmente. El efecto de la temperatura en la óptica de concentración también ha sido objeto de estudio de esta tesis. En particular, mediante simulaciones de elementos finitos se han dado los primeros pasos para el análisis de las deformaciones que sufren los dientes de las lentes de Fresnel híbridas (vidrio-silicona), así como el cambio de índice de refracción con la temperatura y la influencia de ambos efectos sobre el funcionamiento de los sistemas. Se ha implementado un modelo que tiene por objeto considerar las variaciones ambientales, principalmente temperatura y contenido espectral de la radiación directa, así como las sensibilidades térmica y espectral de los sistemas CPV, con el fin de maximizar la energía producida por un módulo de concentración a lo largo de un año en un emplazamiento determinado. Los capítulos 5 y 6 de este libro están dedicados al diseño, fabricación y caracterización de un nuevo concepto de módulo fotovoltaico denominado FluidReflex y basado en una única etapa reflexiva con dieléctrico fluido. En este nuevo concepto la presencia del fluido aporta algunas ventajas significativas como son: un aumento del producto concentración por aceptancia (CAP, en sus siglas en inglés) alcanzable al rodear la célula con un medio cuyo índice de refracción es mayor que uno, una mejora de la eficiencia óptica al disminuir las pérdidas por reflexión de Fresnel en varias interfaces, una mejora de la disipación térmica ya que el calor que se concentra junto a la célula se trasmite por convección natural y conducción en el fluido y un aislamiento eléctrico mejorado. Mediante la construcción y medida de varios prototipos de unidad elemental se ha demostrado que no existe ninguna razón fundamental que impida la implementación práctica del concepto teórico alcanzando una elevada eficiencia. Se ha realizado un análisis de fluidos candidatos probando la existencia de al menos dos de ellos que cumplen todos los requisitos (en particular el de estabilidad bajo condiciones de luz concentrada) para formar parte del sistema de concentración FluidReflex. Por ´ultimo, se han diseñado, fabricado y caracterizado varios prototipos preindustriales de módulos FluidReflex para lo cual ha sido necesario optimizar el proceso de fabricación de la óptica multicavidad a fin de mantener el buen comportamiento óptico obtenido en la fabricación de la unidad elemental. Los distintos prototipos han sido medidos, tanto en el laboratorio como bajo el sol real, analizando el ajuste de corriente de la célula iluminada por el concentrador FluidReflex bajo diferentes distribuciones espectrales de la radiación incidente así como el excelente comportamiento térmico del módulo. ABSTRACT A renewed interest in concentrating photovoltaic (CPV) systems has emerged in recent years encouraged by the development of high-efficiency multijunction solar cells based in IIIV semiconductors that have led to CPV module efficiencies which practically double that of flat panel PV and which reach 35% for record modules. This thesis is devoted to the design and experimental implementation of new concepts for obtaining CPV modules that not only achieve high efficiency under standard conditions but also have such a wide tolerance to assembly errors, tracking, temperature and spectral variations, that the energy generated by them throughout the year is maximized. One of the first addressed issues is the design of secondary optical elements whose primary optics is a Fresnel lens and which, for a fixed concentration, allow an increased acceptance angle and tolerance of the system. Several reflective and refractive secondaries have been designed and analyzed using ray tracing. In particular, using nonimaging optics and based on the single-stage design known as ‘dielectric totally internally reflecting concentrator’, a secondary with square output has been designed, fabricated and characterized. Used together with a Fresnel lens, the secondary can simultaneously achieve high efficiency, concentration and acceptance. Furthermore, an alternative method has been proposed and prototyped for the fabrication of the secondary named dome. The optics is manufactured by direct overmolding of silicone over the solar cells. One characteristic that permeates all the work done in this thesis is the holistic approach in the design of CPV modules, meaning that special attention has been paid to the joint design of the solar cell and the optics to ensure that the total system achieves the highest attainable efficiency. In this regard, many optical systems developed in the thesis have been designed, characterized and optimized considering that the current matching among the subcells within the multijunction solar cell beneath the optics must be close to one. Antireflective coating over the cell acts, somehow, as an interface between the optics and the cell. Consequently, a method has been designed to optimize antireflective coatings that takes into account not only the broad wavelength range that multijunction solar cells are sensitive to but also the angular intensity distribution created by the concentrating optics. In addition, the issue of non-uniformity has also been addressed by comparing the spectral and spatial distributions of irradiance created by different optics (simulated by ray tracing and photographed) and the efficiency losses experienced by cells illuminated by those concentrating optics experimentally determined. The effect of temperature on the concentrating optics has also been studied in this thesis. In particular, finite element simulations have been use to analyze the deformations experienced by the facets of hybrid (silicon-glass) Fresnel lenses, the change of refractive index with temperature and the influence of both effects on the system performance. A model has been implemented which take into consideration atmospheric variations, mainly temperature and spectral content of the direct normal irradiance, as well as thermal and spectral sensitivities of systems, with the aim of maximizing the energy harvested by a CPV module throughout the year in a particular location. Chapters 5 and 6 of this book are devoted to the design, fabrication, and characterization of a new concentrator concept named FluidReflex and based on a single-stage reflective optics with fluid dielectric. In this new concept, the presence of the fluid provides some significant advantages such as: an increased concentration acceptance angle product (CAP) achievable by surrounding the cell with a medium whose refractive index is greater than one, an improvement of the optical efficiency by reducing losses due to Fresnel reflection at several interfaces, an improvement in heat dissipation as the heat concentrated near the cell is transmitted by natural convection and conduction in the fluid, and an improved electrical insulation. By fabricating and characterizing several elementary-unit prototypes it was shown that there is no fundamental reason that prevents the practical implementation of this theoretical concept reaching high efficiency. Several fluid candidates were investigated proving the existence of at least to fluids that meet all the requirements (including the stability under concentrated light) to become part of the FluidReflex concentrator. Finally, several pre-industrial FluidReflex module prototypes have been designed and fabricated. An optimization process for the manufacturing of the multicavity optics was necessary to attain such an optics quality as the one achieved by the single unit. The module prototypes have been measured, both indoors and outdoors, analyzing the current matching of the solar cells beneath the concentrator for different spectral distribution of the incident irradiance. Additionally, the module showed an excellent thermal performance.

Entornos de ayuda a la vida independiente de personas mayores sobre servicios de redes de próxima generación

El progresivo envejecimiento de la población está produciendo una elevada demanda de servicios socio‐asistenciales por parte de las personas mayores para mantener su vida independiente y el consiguiente “envejecimiento activo”. La iniciativa Ambient Assisted Living (AAL) promueve el “envejecimiento activo” a través de las Tecnologías de la Información y las Comunicaciones (TIC) y es en ella donde se centrará el trabajo de esta tesis doctoral. Una característica fundamental de los servicios AAL es su adaptación y personalización a las características y preferencias del usuario y su contexto. Así, el paradigma “context awareness” presenta una gran relevancia en la provisión de servicios AAL y en el soporte a la vida independiente de las personas mayores. Concretamente, la utilización de ontologías permite crear modelos de usuarios y contexto que pueden ser utilizadas para los mecanismos de razonamiento incluidos en los servicios context‐aware. Por otra parte, los usuarios actualmente precisan acceder a un conjunto de servicios desde cualquier red de acceso y desde cualquier dispositivo. Las redes de próxima generación (Next Generation Networks‐NGN) lo hacen posible pues ofrecen una convergencia dispositivo‐red‐servicio. La tecnología IMS (IP Multimedia Subsystem) es una arquitectura que implementa el paradigma NGN y ofrece una serie de servicios de red genéricos llamados servicios habilitadores o enablers que pueden ser reutilizados en cualquier aplicación, soportando mecanismos de interoperabilidad entre aplicaciones y permitiendo un desarrollo robusto, rápido y sencillo. Además, los servicios enablers permiten mecanismos de gestión de la información de usuario para realizar una provisión adaptada del servicio en función de la información del estado del usuario. El objetivo de esta tesis doctoral se centra en establecer un marco de convergencia entre estos dos campos diseñando y desarrollando un conjunto de servicios enablers soportados en una arquitectura IMS implementada para soportar la provisión de aplicaciones AAL bajo el paradigma context‐awareness y la triple convergencia reddispositivo‐ servicio cubriendo así las necesidades y requisitos de las personas mayores. Entre las aportaciones de la presente tesis se destaca la realización de un modelo de plataforma servicios AAL, denominado Residencia Virtual Asistiva, para su provisión en el domicilio de la persona mayor, así como la propuesta de implementación de sus servicios a través de servicios enablers. Por otra parte se define una ontología destinada a modelar servicios AAL así como sus usuarios (personas mayores) para lograr una provisión personalizada y adaptada de servicios AAL. Esta ontología se ha implementado a través del servicio de presencia de la arquitectura IMS para poder crear perfiles de usuario y así poder realizar dicha provisión personalizada. Además, se desarrolla una aplicación de teleconsulta, como ejemplo de servicio AAL, que utiliza una serie de servicios enablers desarrollados para ofrecer funcionalidades avanzadas a la aplicación. Bajo el paradigma contex‐awareness se ha desarrollado y evaluado técnicamente un servicio enabler para ofrecer soporte a la movilidad y a la independencia de las personas mayores con deterioro cognitivo que sufren episodios de desorientación espacial. ABSTRACT The progressive ageing of the population is making elderly people demand sociohealthcare services to maintain an independent living and therefore an “active ageing”. The initiative Ambient Assisted Living (AAL), on which the current PhD thesis is focused, promotes the “active ageing” by means of Information and Communication Technologies (ICT). Essential features of AAL services are the adaptation and personalization to the user’s characteristics and preferences as well as user’s context. Thus, the “context‐awareness” paradigm implies a great importance in the AAL service provision and the elderly independent living support. In particular, the usage of ontologies allows creating user and contexts models to be employed in the reasoning mechanism of context‐aware services. On the other hand, users currently require accessing to a set of services from anywhere and any device. Next‐Generation Networks (NGN) support this need by offering a service‐network‐device convergence. The IP Multimedia Subsystem (IMS) technology is an architecture that implements the NGN paradigm and offers a generic network services know as service enabler which can be reused by any application supporting application interoperability mechanism as well as allowing a simple, fast and robust application development. Furthermore, the service enablers offer user’s information management procedures to achieve and adapt service provision considering the user’s status. The objective of this PhD thesis is focused on establishing a convergence framework between these two previous fields by designing and developing a group of service enablers that will be deployed in an IMS architecture. The enablers developed will support the AAL applications provision from the context‐awareness paradigm and service‐network‐device convergence in order to cover the elderly people’s requirements and needs. Among the contributions achieved in this PhD thesis, the definition of an AAL platform service model, named as “Assited Virtual Nursing Home”, for being deployed in the older adult home is emphasised. In addition, a proposal of service enablers to support the AAL service defined in the model is made. Otherwise, an ontology is defined to model AAL services as well as their users with the aim at achieve a personalized and adapted AAL service. This ontology has been implemented by means of the IMS service presence in order to create users profiles to be used in the personalized AAL services. As an example of AAL service, a teleconsulting application has been developed to employ a group of service enablers developed using a set of advanced functionalities. Considering the context‐paradigm, a service enabler has been developed and technologically evaluated to support the mobility and independence of elderly people with mild cognitive impairment who suffers spatial disorientation episodes.

Casa Huarte: José Antonio Corrales y Ramón Vázquez Molezún. El concepto de lo experimental en el ámbito doméstico

Se plantea aquí el estudio de la Casa Huarte (1966) como un experimento doméstico -así lo concibió el matrimonio Huarte desde la libertad de acción y la entrega al talento de los arquitectos- que sintetizó los principios de los proyectos de la primera etapa de la obra de José Antonio Corrales (1921-2010) y Ramón Vázquez Molezún (1922-1993): paisaje construido, topografía modificada, basamento pesado y arraigado, cubierta ligera flotante y abstracción compositiva. La considerada vivienda experimental del siglo XX estaba asociada a estructuras familiares reducidas, como mucho formadas por un matrimonio con dos hijos. La Casa Huarte, sin embargo, pertenece a un grupo no reconocido de viviendas experimentales de gran formato, que aportaban -en entornos de vida socio-familiar no convencionales- una complejidad funcional, espacial y de relaciones interpersonales que la vivienda mínima no tenía. La Casa Huarte supuso un punto de inflexión en la carrera de Corrales y Molezún, culminando una primera etapa donde se concentraron sus obras más destacadas: Instituto en Herrera de Pisuerga (1956), Residencia de Miraflores (1958) y Pabellón de Bruselas, en sus versiones belga (1958) y española (1959). El proyecto de la Casa Huarte adelantó estrategias que aplicarían en proyectos posteriores -dinamismo del plano horizontal, visuales diagonales, entrada tangencial- y culminó la evolución de un tipo de vivienda que Corrales y Molezún comenzaron a investigar diez años antes. Entre 1956 y 1961 proyectaron cuatro viviendas (Casa Remírez Escudero, Casa Álvarez Mon, Casa Gómez Acebo y Casa Cela) que anticiparon soluciones y situaciones presentes y perfeccionadas en la Casa Huarte. Corrales aseguraba que si la vida es contradictoria la arquitectura también debería serlo. La Casa Huarte es compleja y contradictoria funcional y espacialmente, homogeneizada por una imagen exterior rotunda y atractiva de juegos de volúmenes maclados. El proyecto se muestra así de contundente detrás de habilidosas maniobras tectónicas que ocultan las muchas complejidades y contradicciones aparentemente inapreciables. Estas maniobras confunden la imagen que de la casa se tiene. Debajo de su manto cerámico de reminiscencias vernáculas - híbrido de casa castellana y arquitectura nórdica- se esconde una obra de arquitectura avanzada tecnológicamente. La tesis se desarrolla en cuatro apartados denominados procesos, por lo que tienen de secuencia en el desarrollo de la investigación. Estos procesos son: proceso descriptivo, proceso analítico, proceso interpretativo y proceso poético. Después del necesario e introductorio proceso descriptivo, el cuerpo central de la tesis -que contiene los procesos analítico, interpretativo y poético- sigue un guión marcado por la defensa de la categoría experimental de la Casa Huarte. Se han tratado los conceptos más característicos de la vivienda, desde los más generales a los más específicos divididos en cuatro grupos: Composición, volumen y espacio; El patio como lugar; El jardín: horizonte construido; Domesticidad del mundo interior; y Euritmia: materia y espíritu Molezún aseguraba que para entender una obra de arquitectura había que dibujarla. La Casa Huarte ha sido redibujada en sus tres etapas fundamentales: el proyecto de ejecución (marzo 1965), la casa acabada (noviembre 1966) y el estado actual (2012). El estudio y análisis se centra en la casa construida, por ser la realidad tridimensional en que el proyecto se nos manifiesta. La documentación gráfica del estado actual de la vivienda es inédita y ha sido posible gracias a múltiples inspecciones de la Casa Huarte en visitas facilitadas por las hijas de Jesús Huarte, actuales propietarias de la vivienda. Esta documentación nos permite constatar las alteraciones sobre la obra construida y conocer que modificaciones serían necesarias para recuperar el estado original de la casa. La Casa Huarte es una obra singular, una de las cinco viviendas unifamiliares pertenecientes a la Arquitectura del Movimiento Moderno en España y Portugal de mayor interés registrada por el Docomomo Internacional. Su futuro es incierto, se encuentra deshabitada y en venta. La familia Huarte ha cumplido con creces la misión de conservar su patrimonio. Es pertinente reivindicar su vigencia como obra de referencia de la arquitectura española del siglo XX, y, de esa manera, evitar que caiga en el olvido y el abandono. ABSTRACT The Huarte House (1966) will be analysed as a domestic experiment – that is how the Huarte’s conceived it, putting their faith in the architects – that synthesized the principles from the projects of the first phase of the work of Jose Antonio Corrales (1921-2010) and Ramón Vázquez Molezún (1922-1993): built landscape, modified topography, heavy and rooted base, light, floating roof and abstraction in composition. The experimental house of the 20th century was associated with small nuclear families of at the most a couple and two children. The Huarte House belongs to a group of non-recognised experimental houses of a larger size -and more unconventional familial settings- that lent themselves to greater functional, spatial and interpersonal complexity than their smaller counterparts. The Huarte House represented a turning point in the careers of Corrales and Molezún, capping a first phase that includes their most prominent work: the Institute at Herrera de Pisuerga (1965), the Residence at Miraflores (1958) and the Brussels Pavilion, in its Belgian (1958) and Spanish (1959) version. The project for the Huarte house anticipated strategies which they would apply to later projects: dynamism of the horizontal plane, diagonal visuals, and tangential entrances. It was also the culmination of the evolution of a type of house that Corrales and Molezún had started to investigate ten years earlier. Between 1956 and 1961 they designed four houses (Ramírez Escudero House, Álvarez Mon House, Gómez Acebo House and Cela House) that anticipated the solutions applied and perfected in the Huarte House. Corrales believed that if life was contradictory architecture should be so too. The Huarte House is complex and contradictory. Corrales and Molezún homogenised the project under a bold and attractive image of intersecting volumes. The project appears emphatic thanks to skilful tectonic manoeuvres that conceal the many complexities and contradictions so that they become imperceptible. These manoeuvres confound the image of the house. Under its ceramic blanket of vernacular reminiscences (a mixture of Castilian house and Nordic architecture) lies a technologically advanced piece of architecture. The thesis is organised in four chapters named ‘processes’ in reference to their sequence in the development of the research. These processes are: descriptive process, analytic process, interpretative process and poetic process. After the necessary and introductory descriptive process, the main body of the thesis, which encompasses the analytical, interpretative and poetic processes, develops the argument for incorporating the Huarte House into the experimental category. The thesis addresses the characteristic concepts of a house, from the general to the more specific, divided in four groups: composition, volume and space; the patio: architecture and landscape; the garden: building the horizon and eurythmy: spirit and matter. Molezún was convinced that to get to know a work of architecture it was necessary to draw it. The Huarte House is redrawn in its three main phases: the executive project (march 1965), the finished house (november 1966) and its actual state (2012). The study and analysis centers on the built house, as the actual tri-dimensional manifestation of the project. The graphic documentation of the present state of the house has never been published before and has been made possible by numerous visits to the House facilitated by Jesus Huarte’s daughters who are the current owners. This documentation allows us to determine any alterations of the constructed work and derive the necessary modifications to bring the house back to its original state. The Huarte House is a unique work, one of five single family homes registered by the International Docomomo. Its future is uncertain. It is currently uninhabited and up for sale. The Huarte family has more than delivered on the mission to safeguard its patrimony. It is important to defend its place as a key work of Spanish architecture of the 20th century and so avoid it being forgotten and abandoned.

Development of a versatile biotinylated material based on SU-8

The negative epoxy-based SU-8 photoresist has a wide variety of applications within the semiconductor industry, photonics and lab-on-a-chip devices, and it is emerging as an alternative to silicon-based devices for sensing purposes. In the present work, biotinylation of the SU-8 polymer surface promoted by light is reported. As a result, a novel, efective, and low-cost material, focusing on the immobilization of bioreceptors and consequent biosensing, is developed. This material allows the spatial discrimination depending on the irradiation of desired areas. The most salient feature is that the photobiotin may be directly incorporated into the SU-8 curing process, consequently reducing time and cost. The potential use of this substrate is demonstrated by the immunoanalytical detection of the synthetic steroid gestrinone, showing excellent performances. Moreover, the naked eye biodetection due to the transparent SU-8 substrate, and simple instrumental quantication are additional advantages.

Desing and development of a robotic platform for the evaluation of search algorithms

Plant diseases represent a major economic and environmental problem in agriculture and forestry. Upon infection, a plant develops symptoms that affect different parts of the plant causing a significant agronomic impact. As many such diseases spread in time over the whole crop, a system for early disease detection can aid to mitigate the losses produced by the plant diseases and can further prevent their spread [1]. In recent years, several mathematical algorithms of search have been proposed [2,3] that could be used as a non-invasive, fast, reliable and cost-effective methods to localize in space infectious focus by detecting changes in the profile of volatile organic compounds. Tracking scents and locating odor sources is a major challenge in robotics, on one hand because odour plumes consists of non-uniform intermittent odour patches dispersed by the wind and on the other hand because of the lack of precise and reliable odour sensors. Notwithstanding, we have develop a simple robotic platform to study the robustness and effectiveness of different search algorithms [4], with respect to specific problems to be found in their further application in agriculture, namely errors committed in the motion and sensing and to the existence of spatial constraints due to land topology or the presence of obstacles.

Resilence, rural development and suistainable management: a working with people model approach

Nowadays, it has become evident the need to seek sustainable development models that address challenges arising in a variety of contexts. The resilience concept appears connected to the ability of people to cope with adversities that inevitably arise due to context dynamics, at different spatial and temporal scales. This concept is related to the model known as Working With People (WWP), focused on rural development projects planning, management and evaluation, from the integration of three dimensions: technical-entrepreneurial, ethical-social and political-contextual. The research reported is part of the RETHINK European Project, whose overall aim is farm modernization and rural resilience. The resilience concept has been analyzed, in the scope of rural development projects management, and a relationship with the WWP model has been established. To this end, a thorough review of the scientific literature concerning this topic has been addressed, in order to develop the state of the art of the different concepts and models involved. A conceptual proposal for the integration of resilience in rural development projects sustainable management, through the three-dimensional WWP model is presented.