Risk of Leaching in Soils Amended by Compost and digestate from Municipal Solid Waste

New European directives have proposed the direct application of compost and digestate produced from municipal solid wastes as organic matter sources in agricultural soils. Therefore information about phosphorus leaching from these residues when they are applied to the soil is increasingly mportant. Leaching experiments were conducted to determine the P mobility in compost and digestate mixtures, supplying equivalent amounts to 100 kg P ha?1 to three different types of soils. The tests were performed in accordance with CEN/TS 14405:2004 analyzing the maximum dissolved reactive P and the kinetic rate in the leachate. P biowaste fractionation indicated that digestate has a higher level of available P than compost has. In contrast, P losses in leaching experiments with soil-compost mixtureswere higher than in soil-digestate mixtures. For bothwastes, therewas no correlation between disolved reactive P lost and the water soluble P.The interaction between soil and waste, the long experimentation time, and the volume of leachate obtained caused the waste?s wettability to become an influential parameter in P leaching behavior. The overall conclusion is that kinetic data analysis provides valuable information concerning the sorption mechanism that can be used for predicting the large-scale behavior of soil systems.

Dust effects on PV array performance: in-field observations with non-uniform patterns

This paper presents the impact of non-homogeneous deposits of dust on the performance of a PV array. The observations have been made in a 2-MW PV park in the southeast region of Spain. The results are that inhomogeneous dust leads to more significant consequences than the mere short-circuit current reduction resulting from transmittance losses. In particular, when the affected PV modules are part of a string together with other cleaned (or less dusty) ones, operation voltage losses arise. These voltage losses can be several times larger than the short-circuit ones, leading to power losses that can be much larger than what measurements suggest when the PV modules are considered separately. Significant hot-spot phenomena can also arise leading to cells exhibiting temperature differences of more than 20 degrees and thus representing a threat to the PV modules' lifetime.

The segmental approximation in multijunction solar cells

The segmental approach has been considered to analyze dark and light I-V curves. The photovoltaic (PV) dependence of the open-circuit voltage (Voc), the maximum power point voltage (Vm), the efficiency (?) on the photogenerated current (Jg), or on the sunlight concentration ratio (X), are analyzed, as well as other photovoltaic characteristics of multijunction solar cells. The characteristics being analyzed are split into monoexponential (linear in the semilogarithmic scale) portions, each of which is characterized by a definite value of the ideality factor A and preexponential current J0. The monoexponentiality ensures advantages, since at many steps of the analysis, one can use the analytical dependences instead of numerical methods. In this work, an experimental procedure for obtaining the necessary parameters has been proposed, and an analysis of GaInP/GaInAs/Ge triple-junction solar cell characteristics has been carried out. It has been shown that up to the sunlight concentration ratios, at which the efficiency maximum is achieved, the results of calculation of dark and light I-V curves by the segmental method fit well with the experimental data. An important consequence of this work is the feasibility of acquiring the resistanceless dark and light I-V curves, which can be used for obtaining the I-V curves characterizing the losses in the transport part of a solar cell.

Determinación del riesgo de incendio en una instalación de secado de alperujo = Determination of the risk of fire in an olive-oil mill waste dryer

For the energy valorization of alperujo, residue of the olive oil two phases extraction process, it is necessary to perform a drying process to reduce moisture content from over 60% to less than 10%. In order to reduce primary energy consumption and get an economic return, usually in this kind of drying facilities Gas Turbine CHP is used as a heat source. There have been recently in Spain some fires in this kind of GT-CHP facilities, which have caused high material losses. In some of these fires it has been suggested that the fire was caused by the output of incandescent alperujo in the flue gasesof the drying system. Therefore, the aim of this study is to determine experimentally and analytically under which operational conditions a process of alperujo self-ignition in the drying process can begin, and determine the actual fire hazard in this type of TG-CHP system. For analytical study, the temperature and initial composition of the combustion gases of the Gas Turbine at the entrance of the drying process was calculated and the gas equilibrium conditions reached in contact with the biomass were calculated and, therefore, the temperature of the biomass during the drying process. Moreover, the layer and dust ignition temperature of alperujo has been experimentally determined, according to EN 50281-2-1: 2000. With these results, the operating conditions of the drying process, in which there are real risk of auto-ignition of alperujo have been established.Para la valorización energética del alperujo, residuo del proceso de extracción en dos fases del aceite de oliva, es necesario realizar un proceso de secado para reducir su contenido de humedad de más del 60% al 10% m/m en b.h. Con el fin de reducir el consumo de energía primaria y obtener una rentabilidad económica, normalmente en este tipo de instalaciones de secado se usa la cogeneración con turbina de gas (TG) como fuente de calor. En España en los últimos años han ocurrido algunos casos de incendio en este tipo de instalaciones de cogeneración, que han supuesto pérdidas materiales muy elevadas. Por esta razón, el objetivo de este trabajo es determinar analítica y experimentalmente las condiciones operativas del secadero bajo las cuales podría comenzar un proceso de autoinflamación del alperujo y determinar el riesgo real de incendio en este tipo de instalaciones. Para el estudio analítico, se ha planteado y validado el modelo matemático que permite calcular la temperatura y la composición de los gases de combustión a la entrada y a la salida del secadero, en función de las curvas características de la TG, de las condiciones atmosféricas, del caudal y del grado de humedad de la biomasa tratada. El modelo permite además calcular la temperatura de bulbo húmedo, que es la máxima temperatura que podría alcanzar la biomasa durante el proceso de secado y determinar la cantidad de biomasa que se puede secar completamente en función del caudal y de las condiciones de entrada de los gases de combustión. Con estos resultados y la temperatura mínima de autoinflamación del alperujo determinada experimentalmente siguiendo la norma EN 50281- 2-1:2000, se demuestra que en un proceso de secado de alperujo en condiciones normales de operación no existe riesgo de autoencendido que pueda dar origen a un incendio.

Internal quantum efficiency of III-nitride quantum dot superlattices grown by plasma-assisted molecular-beam epitaxy

We present a study of the optical properties of GaN/AlN and InGaN/GaN quantum dot (QD) superlattices grown via plasma-assisted molecular-beam epitaxy, as compared to their quantum well (QW) counterparts. The three-dimensional/two-dimensional nature of the structures has been verified using atomic force microscopy and transmission electron microscopy. The QD superlattices present higher internal quantum efficiency as compared to the respective QWs as a result of the three-dimensional carrier localization in the islands. In the QW samples, photoluminescence (PL) measurements point out a certain degree of carrier localization due to structural defects or thickness fluctuations, which is more pronounced in InGaN/GaN QWs due to alloy inhomogeneity. In the case of the QD stacks, carrier localization on potential fluctuations with a spatial extension smaller than the QD size is observed only for the InGaN QD-sample with the highest In content (peak emission around 2.76 eV). These results confirm the efficiency of the QD three-dimensional confinement in circumventing the potential fluctuations related to structural defects or alloy inhomogeneity. PL excitation measurements demonstrate efficient carrier transfer from the wetting layer to the QDs in the GaN/AlN system, even for low QD densities (~1010 cm-3). In the case of InGaN/GaN QDs, transport losses in the GaN barriers cannot be discarded, but an upper limit to these losses of 15% is deduced from PL measurements as a function of the excitation wavelength.

Information and Communication Technology Spanish Gazelles: A Competitiveness Analysis

Due to the difficult economic situation, which has led to dramatic job losses in Spain, the companies with high growth potential are seen as a promising alternative to resume economic growth. A sample of companies in the information and communications technology sector sets up the basis of this comparative analysis of the characteristics of gazelles versus the standard firms. Also this study shows, by means of a cluster analysis, the determinants of gazelles along the different stages of their development. This will lead to a better understanding of gazelle businesses, from which to develop incentives to increase the number of them.

EMI filter design of a three-phase buck-type rectifier for aircraft applications

An EMI filter for a three-phase buck-type medium power pulse-width modulation rectifier is designed. This filter considers differential mode noise and complies with MIL-STD- 461E for the frequency range of 10kHz to 10MHz. In industrial applications, the frequency range of the standard starts at 150kHz and the designer typically uses a switching frequency of 28kHz because the fifth harmonic is out of the range. This approach is not valid for aircraft applications. In order to design the switching frequency in aircraft applications, the power losses in the semiconductors and the weight of the reactive components should be considered. The proposed design is based on a harmonic analysis of the rectifier input current and an analytical study of the input filter. The classical industrial design does not consider the inductive effect in the filter design because the grid frequency is 50/60Hz. However, in the aircraft applications, the grid frequency is 400Hz and the inductance cannot be neglected. The proposed design considers the inductance and the capacitance effect of the filter in order to obtain unitary power factor at full power. In the optimization process, several filters are designed for different switching frequencies of the converter. In addition, designs from single to five stages are considered. The power losses of the converter plus the EMI filter are estimated at these switching frequencies. Considering overall losses and minimal filter volume, the optimal switching frequency is selected

Video Prioritization for Unequal Error Protection

We analyze the effect of packet losses in video sequences and propose a lightweight Unequal Error Protection strategy which, by choosing which packet is discarded, reduces strongly the Mean Square Error of the received sequence

Integrated methodology for assessing the effects of geomorphological river restoration on fish habitat and riparian vegetation

Changes in the geomorphology of rivers have serious repercussions, causing losses in the dynamics and naturalness of their forms, going in many cases, from a type of meandering channel, with constant erosion and sedimentation processes, to a channelized narrow river with rigid and stable margins, where the only possibility of movement occurs in the vertical, causing the only changes in channel geometry occur in the river bed. On the other hand, these changes seriously affect the naturalness of the banks, preventing the development of riparian vegetation and reducing the cross connectivity of the riparian corridor. Common canalizations and disconnections of meanders increase the slope, and therefore speed, resulting in processes of regressive erosion, effect increased as a result of the narrowing of the channel and the concentration of flows. This process of incision may turn the flood plain to be "hung", being completely disconnected from the water table, with important consequences for vegetation. As an example of the effects of these changes, it has been chosen the case of the Arga River The Arga river has been channelized and rectified, as it passes along the meander RamalHondo and Soto Gil (Funes, Navarra). The effects on fish habitat and riparian vegetation by remeandering the Arga River are presented. and Ttwo very contrasting situationsrestoration hypothesis, in terms of geomorphology concerns, have been established to assess the effects these changes have on the habitat of one of the major fish species in the area (Luciobabus graellsii) and on the riparian vegetation. To accomplish this goal, it has been necessary to used the a digital elevation model provided by LIDAR flight, bathymetric data, flow data, as inputs, and a hydraulic simulation model 2D (Infoworks RS). The results obtained not only helped to evaluate the effects of the past alterations of geomorphologic characteristics, but also to predict fish and vegetation habitat responses to this type of changes.

Microprocesos láser para la mejora de dispositivos fotovoltaicos basados en silicio cristalino

En los últimos años la tecnología láser se ha convertido en una herramienta imprescindible en la fabricación de dispositivos fotovoltaicos, ayudando a la consecución de dos objetivos claves para que esta opción energética se convierta en una alternativa viable: reducción de costes de fabricación y aumento de eficiencia de dispositivo. Dentro de las tecnologías fotovoltaicas, las basadas en silicio cristalino (c-Si) siguen siendo las dominantes en el mercado, y en la actualidad los esfuerzos científicos en este campo se encaminan fundamentalmente a conseguir células de mayor eficiencia a un menor coste encontrándose, como se comentaba anteriormente, que gran parte de las soluciones pueden venir de la mano de una mayor utilización de tecnología láser en la fabricación de los mismos. En este contexto, esta Tesis hace un estudio completo y desarrolla, hasta su aplicación en dispositivo final, tres procesos láser específicos para la optimización de dispositivos fotovoltaicos de alta eficiencia basados en silicio. Dichos procesos tienen como finalidad la mejora de los contactos frontal y posterior de células fotovoltaicas basadas en c-Si con vistas a mejorar su eficiencia eléctrica y reducir el coste de producción de las mismas. En concreto, para el contacto frontal se han desarrollado soluciones innovadoras basadas en el empleo de tecnología láser en la metalización y en la fabricación de emisores selectivos puntuales basados en técnicas de dopado con láser, mientras que para el contacto posterior se ha trabajado en el desarrollo de procesos de contacto puntual con láser para la mejora de la pasivación del dispositivo. La consecución de dichos objetivos ha llevado aparejado el alcanzar una serie de hitos que se resumen continuación: - Entender el impacto de la interacción del láser con los distintos materiales empleados en el dispositivo y su influencia sobre las prestaciones del mismo, identificando los efectos dañinos e intentar mitigarlos en lo posible. - Desarrollar procesos láser que sean compatibles con los dispositivos que admiten poca afectación térmica en el proceso de fabricación (procesos a baja temperatura), como los dispositivos de heterounión. - Desarrollar de forma concreta procesos, completamente parametrizados, de definición de dopado selectivo con láser, contactos puntuales con láser y metalización mediante técnicas de transferencia de material inducida por láser. - Definir tales procesos de forma que reduzcan la complejidad de la fabricación del dispositivo y que sean de fácil integración en una línea de producción. - Mejorar las técnicas de caracterización empleadas para verificar la calidad de los procesos, para lo que ha sido necesario adaptar específicamente técnicas de caracterización de considerable complejidad. - Demostrar su viabilidad en dispositivo final. Como se detalla en el trabajo, la consecución de estos hitos en el marco de desarrollo de esta Tesis ha permitido contribuir a la fabricación de los primeros dispositivos fotovoltaicos en España que incorporan estos conceptos avanzados y, en el caso de la tecnología de dopado con láser, ha permitido hacer avances completamente novedosos a nivel mundial. Asimismo los conceptos propuestos de metalización con láser abren vías, completamente originales, para la mejora de los dispositivos considerados. Por último decir que este trabajo ha sido posible por una colaboración muy estrecha entre el Centro Láser de la UPM, en el que la autora desarrolla su labor, y el Grupo de Investigación en Micro y Nanotecnologías de la Universidad Politécnica de Cataluña, encargado de la preparación y puesta a punto de las muestras y del desarrollo de algunos procesos láser para comparación. También cabe destacar la contribución de del Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas, CIEMAT, en la preparación de experimentos específicos de gran importancia en el desarrollo del trabajo. Dichas colaboraciones se han desarrollado en el marco de varios proyectos, tales como el proyecto singular estratégico PSE-MICROSIL08 (PSE-iv 120000-2006-6), el proyecto INNDISOL (IPT-420000-2010-6), ambos financiados por el Fondo Europeo de Desarrollo Regional FEDER (UE) “Una manera de hacer Europa” y el MICINN, y el proyecto del Plan Nacional AMIC (ENE2010-21384-C04-02), cuya financiación ha permitido en gran parte llevar a término este trabajo. v ABSTRACT. Last years lasers have become a fundamental tool in the photovoltaic (PV) industry, helping this technology to achieve two major goals: cost reduction and efficiency improvement. Among the present PV technologies, crystalline silicon (c-Si) maintains a clear market supremacy and, in this particular field, the technological efforts are focussing into the improvement of the device efficiency using different approaches (reducing for instance the electrical or optical losses in the device) and the cost reduction in the device fabrication (using less silicon in the final device or implementing more cost effective production steps). In both approaches lasers appear ideally suited tools to achieve the desired success. In this context, this work makes a comprehensive study and develops, until their implementation in a final device, three specific laser processes designed for the optimization of high efficiency PV devices based in c-Si. Those processes are intended to improve the front and back contact of the considered solar cells in order to reduce the production costs and to improve the device efficiency. In particular, to improve the front contact, this work has developed innovative solutions using lasers as fundamental processing tools to metalize, using laser induced forward transfer techniques, and to create local selective emitters by means of laser doping techniques. On the other side, and for the back contact, and approached based in the optimization of standard laser fired contact formation has been envisaged. To achieve these fundamental goals, a number of milestones have been reached in the development of this work, namely: - To understand the basics of the laser-matter interaction physics in the considered processes, in order to preserve the functionality of the irradiated materials. - To develop laser processes fully compatible with low temperature device concepts (as it is the case of heterojunction solar cells). - In particular, to parameterize completely processes of laser doping, laser fired contacts and metallization via laser transfer of material. - To define such a processes in such a way that their final industrial implementation could be a real option. - To improve widely used characterization techniques in order to be applied to the study of these particular processes. - To probe their viability in a final PV device. Finally, the achievement of these milestones has brought as a consequence the fabrication of the first devices in Spain incorporating these concepts. In particular, the developments achieved in laser doping, are relevant not only for the Spanish science but in a general international context, with the introduction of really innovative concepts as local selective emitters. Finally, the advances reached in the laser metallization approached presented in this work open the door to future developments, fully innovative, in the field of PV industrial metallization techniques. This work was made possible by a very close collaboration between the Laser Center of the UPM, in which the author develops his work, and the Research Group of Micro y Nanotecnology of the Universidad Politécnica de Cataluña, in charge of the preparation and development of samples and the assessment of some laser processes for comparison. As well is important to remark the collaboration of the Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas, CIEMAT, in the preparation of specific experiments of great importance in the development of the work. These collaborations have been developed within the framework of various projects such as the PSE-MICROSIL08 (PSE-120000-2006-6), the project INNDISOL (IPT-420000-2010-6), both funded by the Fondo Europeo de Desarrollo Regional FEDER (UE) “Una manera de hacer Europa” and the MICINN, and the project AMIC (ENE2010-21384-C04-02), whose funding has largely allowed to complete this work.

Podredumbre parda del melocotonero (Monilinia spp.) : detección, identificación de especies y contribución a la epidemiología de la enfermedad

Monilinia spp. (M. laxa, M. fructigena y M. fructicola) causa marchitez en brotes y flores, chancros en ramas y podredumbre de la fruta de hueso provocando pérdidas económicas importantes en años con climatología favorable para el desarrollo de la enfermedad, particularmente en variedades tardías de melocotonero y nectarino. En estos huéspedes en España, hasta el momento, la especie predominante es M. laxa y, en menor proporción, M. fructigena. La reciente introducción en Europa de la especie de cuarentena M. fructicola hace necesaria una detección e identificación rápida de cada una de las especies. Además, hay diversos aspectos de la etiología y epidemiología de la enfermedad que no se conocen en las condiciones de cultivo españolas. En un primer objetivo de esta Tesis se ha abordado la detección e identificación de las especies de Monilinia spp. causantes de podredumbre parda. El estudio de las bases epidemiológicas para el control de la enfermedad constituye el fin del segundo objetivo. Para la detección del género Monilinia en material vegetal por PCR, diferenciándolo de otros hongos presentes en la superficie del melocotonero, se diseñaron una pareja de cebadores siguiendo un análisis del ADN ribosomal. La discriminación entre especies de Monilinia se consiguió utilizando marcadores SCAR (región amplificada de secuencia caracterizada), obtenidos después de un estudio de marcadores polimórficos de ADN amplificados al azar (RAPDs). También fue diseñado un control interno de amplificación (CI) basado en la utilización de un plásmido con secuencias de los cebadores diferenciadores del género, para ser utilizado en el protocolo de diagnóstico de la podredumbre parda con el fin de reconocer falsos negativos debidos a la inhibición de PCR por componentes celulares del material vegetal. Se disponía de un kit comercial que permitía distinguir Monilinia de otros géneros y M. fructicola del resto de especies mediante anticuerpos monoclonales utilizando la técnica DAS-ELISA. En esta Tesis se probaron diferentes fuentes de material como micelio ó conidias procedentes de cultivos en APD, o el micelio de la superficie de frutas o de momias frescas, como formas de antígeno. Los resultados obtenidos con ELISA se compararon con la identificación por métodos morfológico-culturales y por PCR con los cebadores desarrollados en esta Tesis. Los resultados demostraron la posibilidad de una detección temprana en frutas frescas por este método, realzando las posibilidades de una diagnosis temprana para una prevención más eficaz de M. fructicola en fruta de hueso. El estudio epidemiológico de la enfermedad comenzó con la determinación de las principales fuentes de inóculo primario y su importancia relativa en melocotoneros y nectarinos del valle del Ebro. Para ello se muestrearon 9 huertos durante los años 2003 a 2005 recogiendo todas las momias, frutos abortados, gomas, chancros, y brotes necróticos en los árboles. También se recogieron brotes aparentemente sanos y muestras de material vegetal situados en el suelo. En estas muestras se determinó la presencia de Monilinia spp. Los resultados mostraron que la fuente principal de inóculo son las momias que se quedan en los árboles en las que la supervivencia del hongo tras el invierno es muy alta. También son fuentes de inóculo las momias del suelo y los brotes necróticos. De aquí se deriva que una recomendación importante para los agricultores es que deben eliminar este material de los huertos. Un aspecto no estudiado en melocotonero o nectarino en España es la posible relación que puede darse entre la incidencia de infecciones latentes en los frutos inmaduros a lo largo del cultivo y la incidencia de podredumbre en los frutos en el momento de la recolección y en postcosecha. Esta relación se había observado previamente en otros frutales de hueso infectados con M. fructicola en diversos países del mundo. Para estudiar esta relación se realizaron ensayos en cinco huertos comerciales de melocotonero y nectarino situados en el Valle del Ebro en cuatro estados fenológicos durante los años 2000-2002. No se observaron infecciones latentes en botón rosa, dándose la máxima incidencia en precosecha, aunque en algunos huertos se daba otro pico en el endurecimiento del embrión. La especie prevaleciente fue M. laxa. Se obtuvo una correlación positiva significativa entre la incidencia de infecciones latentes y la incidencia de podredumbre en postcosecha. Se desarrolló también un modelo de predicción de las infecciones latentes en función de la temperatura (T) y el periodo de humectación (W). Este modelo indicaba que T y W explicaban el 83% de la variación en la incidencia de infecciones latentes causadas por Monilinia spp. Por debajo de 8ºC no se predecían latentes, necesitándose más de 22h de W para predecir la ocurrencia de latentes con T = 8ºC, mientras que solo se necesitaban 5h de W a 25ºC. Se hicieron también ensayos en condiciones controladas para determinar la relación entre la incidencia de las infecciones latentes, las condiciones ambientales (T y W), la concentración de inóculo del patógeno (I) y el estado de desarrollo del huésped (S) y para validar el modelo de predicción desarrollado con los experimentos de campo. Estos ensayos se llevaron cabo con flores y frutos de nectarino procedentes de un huerto comercial en seis estados fenológicos en los años 2004 y 2005, demostrándose que la incidencia de podredumbre en postcosecha y de infecciones latentes estaba afectada por T, W, I y S. En los frutos se producían infecciones latentes cuando la T no era adecuada para el desarrollo de podredumbre. Una vez desarrollado el embrión eran necesarias más de 4-5h de W al día y un inóculo superior a 104 conidias ml-1 para que se desarrollase o podredumbre o infección latente. La ecuación del modelo obtenido con los datos de campo era capaz de predecir los datos observados en estos experimentos. Para evaluar el efecto del inóculo de Monilinia spp. en la incidencia de infecciones latentes y de podredumbre de frutos en postcosecha se hicieron 11 experimentos en huertos comerciales de melocotonero y nectarino del Valle del Ebro durante 2002 a 2005. Se observó una correlación positiva entre los números de conidias de Monilinia spp. en la superficie de los frutos y la incidencia de infecciones latentes De los estudios anteriores se deducen otras dos recomendaciones importantes para los agricultores: las estrategias de control deben tener en cuenta las infecciones latentes y estimar el riesgo potencial de las mismas basándose en la T y W. Deben tener también en cuenta la concentración de esporas de Monilinia spp. en la superficie de los frutos para disminuir el riesgo de podredumbre parda. El conocimiento de la estructura poblacional de los patógenos sienta las bases para establecer métodos más eficaces de manejo de las enfermedades. Por ello en esta Tesis se ha estudiado el grado de diversidad genética entre distintas poblaciones de M. laxa en diferentes localidades españolas utilizando 144 marcadores RAPDs (59 polimórficos y 85 monomórficos) y 21 aislados. El análisis de la estructura de la población reveló que la diversidad genética dentro de las subpoblaciones (huertos) (HS) representaba el 97% de la diversidad genética (HT), mientras que la diversidad genética entre subpoblaciones (DST) sólo representaba un 3% del total de esta diversidad. La magnitud relativa de la diferenciación génica entre subpoblaciones (GST) alcanzaba 0,032 y el número estimado de migrantes por generación (Nm) fue de 15,1. Los resultados obtenidos en los dendrogramas estaban de acuerdo con el análisis de diversidad génica. Las agrupaciones obtenidas eran independientes del huerto de procedencia, año o huésped. En la Tesis se discute la importancia relativa de las diferentes fuentes evolutivas en las poblaciones de M. laxa. Finalmente se realizó un muestreo en distintos huertos de melocotonero y nectarino del Valle del Ebro para determinar la existencia o no de aislados resistentes a los fungicidas del grupo de los benzimidazoles y las dicarboximidas, fungicidas utilizados habitualmente para el control de la podredumbre parda y con alto riesgo de desarrollar resistencia en las poblaciones patógenas. El análisis de 114 aislados de M. laxa con los fungicidas Benomilo (bencimidazol) (1Bg m.a ml-1), e Iprodiona (dicarboximida) (5Bg m.a ml-1), mostró que ninguno era resistente en las dosis ensayadas. Monilinia spp. (M. laxa, M. fructigena and M. fructicola) cause bud and flower wilt, canker in branches and stone fruit rot giving rise important economic losses in years with appropriate environmental conditions, it is particularly important in late varieties of peach and nectarine. Right now, M. laxa is the major species for peach and nectarine in Spain followed by M. fructigena, in a smaller proportion. The recent introduction of the quarantine organism M. fructicola in Europe makes detection and identification of each one of the species necessary. In addition, there are different aspects of disease etiology and epidemiology that are not well known in Spain conditions. The first goal of this Thesis was the detection and identification of Monilinia spp. causing brown rot. Study of the epidemiology basis for disease control was the second objective. A pair of primers for PCR detection was designed based on the ribosomal DNA sequence in order to detect Monilinia spp. in plant material and to discriminate it from other fungi colonizing peach tree surface. Discrimination among Monilinia spp. was successful by SCAR markers (Sequence Characterized Amplified Region), obtained after a random amplified polymorphic DNA markers (RAPDs) study. An internal control for the PCR (CI) based on the use of a mimic plasmid designed on the primers specific for Monilinia was constructed to be used in diagnosis protocol for brown rot in order to avoid false negatives due to the inhibition of PCR as consequence of remained plant material. A commercial kit based on DAS-ELISA and monoclonals antibodies was successfully tested to distinguish Monilinia from other fungus genera and M. fructicola from other Monilinia species. Different materials such as micelium or conidias from APD cultures, or micelium from fresh fruit surfaces or mummies were tested in this Thesis, as antigens. Results obtained by ELISA were compared to classical identification by morphologic methods and PCR with the primers developed in this Thesis. Results demonstrated the possibility of an early detection in fresh fruits by this method for a more effective prevention of M. fructicola in stone fruit. The epidemiology study of the disease started with the determination of the main sources of primary inoculum and its relative importance in peach trees and nectarines in the Ebro valley. Nine orchards were evaluated during years 2003 to 2005 collecting all mummies, aborted fruits, rubbers, cankers, and necrotic buds from the trees. Apparently healthy buds and plant material located in the ground were also collected. In these samples presence of Monilinia spp. was determined. Results showed that the main inoculum sources are mummies that stay in the trees and where fungus survival after the winter is very high. Mummies on the ground and the necrotics buds are also sources of inoculum. As consequence of this an important recommendation for the growers is the removal of this material of the orchards. An important issue not well studied in peach or nectarine in Spain is the possible relationship between the incidence of latent infections in the immature fruits and the incidence of fruit rot at harvesting and postharvesting. This relationship had been previously shown in other stone fruit trees infected with M. fructicola in different countries over the world. In order to study this relationship experiments were run in five commercial peach and nectarine orchards located in the Ebro Valley in four phenologic states from 2000 to 2002. Latent infections were not observed in pink button, the maxima incidence arise in preharvest, although in some orchards another increase occurred in the embryo hardening. The most prevalence species was M. laxa. A significant positive correlation between the incidence of latent infections and the incidence of rot in postharvest was obtained. A prediction model of the latent infections based on the temperature (T) and the wetness duration (W) was also developed. This model showed that T and W explained 83% of the variation in latent infection incidence caused by Monilinia spp. Below 8ºC latent infection was not predicted, more than 22h of W with T = 8ºC were needed to predict latent infection occurrence of, whereas at 25ºC just 5h of W were enough. Tests under controlled conditions were also made to determine the relationship among latent infections incidence, environmental conditions (T and W), inoculum concentration of the pathogen (I) and development state of the host (S) to validate the prediction model developed on the field experiments. These tests were made with flowers and fruits of nectarine coming from a commercial orchard, in six phenologic states in 2004 and 2005, showing that incidence of rot in postharvest and latent infections were affected by T, W, I and S. In fruits latent infections took place when the T was not suitable for rot development. Once developed the embryo, more than 4-5h of W per day and higher inoculums (104 conidia ml-1) were necessary for rot or latent infection development. The equation of the model obtained with the field data was able to predict the data observed in these experiments. In order to evaluate the effect of inoculum of Monilinia spp. in the incidence of latent infections and of rot of fruits in postharvest, 11 experiments in commercial orchards of peach and nectarine of the Ebro Valley were performed from 2002 to 2005. A positive correlation between the conidial numbers of Monilinia spp. in the surface of the fruits and the incidence of latent infections was observed. Based on those studies other two important recommendations for the agriculturists are deduced: control strategies must consider the latent infections and potential risk based on the T and W. Spores concentration of Monilinia spp. in the surface of fruits must be also taken in concern to reduce the brown rot risk. The knowledge of the population structure of the pathogens determines the bases to establish more effective methods of diseases handling. For that reason in this Thesis the degree of genetic diversity among different M. laxa populations has been studied in different Spanish locations using 144 RAPDs markers (59 polymorphic and 85 monomorphics) on 21 fungal isolates. The analysis of the structure of the population revealed that the genetic diversity within the subpopulations (orchards) (HS) represented 97% of the genetic diversity (HT), whereas the genetic diversity between subpopulations (DST) only represented a 3% of the total of this diversity. The relative magnitude of the genic differentiation between subpopulations (GST) reached 0.032 and the considered number of migrantes by generation (Nm) was of 15.1. The results obtained in dendrograms were in agreement with the analysis of genic diversity. The obtained groupings were independent of the orchard of origin, year or host. In the Thesis the relative importance of the different evolutionary sources in the populations from M. laxa is discussed. Finally a sampling of resistant isolates in different orchards from peach and nectarine of Ebro Valley was made to determine the existence of fungicide resistance of the group of benzimidazoles and the dicarboximidas, fungicides used habitually for the control of rot brown and with high risk of resistance developing in the pathogenic populations. The analysis of 114 isolated ones of M. laxa with the fungicides Benomilo (bencimidazol) (1Bg m.a ml-1), and Iprodiona (dicarboximida) (5Bg m.a ml-1), showed no resistant in the doses evaluated.

Energy Analysis of Bare Electrodynamic Tethers

The design of an electrodynamic tether is a complex task that involves the control of dynamic instabilities, optimization of the generated power (or the descent time in deorbiting missions), and minimization of the tether mass. The electrodynamic forces on an electrodynamic tether are responsible for variations in the mechanical energy of the tethered system and can also drive the system to dynamic instability. Energy sources and sinks in this system include the following: 1) ionospheric impedance, 2) the potential drop at the cathodic contactor, 3) ohmic losses in the tether, 4) the corotational plasma electric field, and 5) generated power and/or 6) input power. The analysis of each of these energy components, or bricks, establishes parameters that are useful tools for tether design. In this study, the nondimensional parameters that govern the orbital energy variation, dynamic instability, and power generation were characterized, and their mutual interdependence was established. A space-debris mitigation mission was taken as an example of this approach for the assessment of tether performance. Numerical simulations using a dumbbell model for tether dynamics, the International Geomagnetic Reference Field for the geomagnetic field, and the International Reference Ionosphere for the ionosphere were performed to test the analytical approach. The results obtained herein stress the close relationships that exist among the velocity of descent, dynamic stability, and generated power. An optimal tether design requires a detailed tradeoff among these performances in a real-world scenario.

Triple-junction solar cell performance under Fresnel-based concentrators taking into account chromatic aberration and off-axis operation

Concentration photovoltaic (CPV) systems might produce quite uneven irradiance distributions (both on their level and on their spectral distribution) on the solar cell. This effect can be even more evident when the CPV system is slightly off-axis, since they are often designed to assure good uniformity only at normal incidence. The non-uniformities both in absolute irradiance and spectral content produced by the CPV systems, can originate electrical losses in multi-junction solar cells (MJSC). This works is focused on the integration of ray-tracing methods for simulating the irradiance and spectrum maps produced by different optic systems throughout the solar cell surface, with a 3D fully distributed circuit model which simulates the electrical behavior of a state-of-the-art triple-junction solar cell under the different light distributions obtained with ray-tracing. In this study four different CPV system (SILO, XTP, RTP, and FK) comprising Fresnel lenses concentrating sunlight onto the same solar cell are modeled when working on-axis and 0.6 degrees off-axis. In this study the impact of non-uniformities on a CPV system behavior is revealed. The FK outperforms other Fresnel-based CPV systems in both on-axis and off-axis conditions.

Progress on the development of a technology for silicon purification

The polysilicon market is experiencing tremendous changes due to the strong demand from Photovoltaics (PV), which has by far surpassed the demand from Microelectronics. The need of solar silicon has induced a large increase in capacity, which has now given a scenario of oversupply, reducing the polysilicon price to levels that put a strong pressure on the cost structure of the producers. The paper reports on the R&D efforts carried out in the field of solar silicon purification via the chlorosilane route by a private-public consortium that is building a pilot plant of 50-100 tonnes/year, that will synthesize trichlorosilane, purify it and deposit ultrapure silicon in an industrial-size Siemens type reactor. It has also capabilities for ingot growth and material characterization. A couple of examples of the progress so far are given, the first one related to the recycling scheme of chlorinated compounds, and the second to the minimization of radiation losses in the CVD deposition process, which account for a relevant part of the total energy consumption. In summary, the paper gives details on the technology being developed in our pilot plant, which offers a unique platform for field-testing of innovative approaches that can lead to a cost reduction of solar silicon produced via the chlorosilane route.

Hybrid behavioral-analytical loss model for a high frequency and low load DC/DC buck converter

This work presents a behavioral-analytical hybrid loss model for a buck converter. The model has been designed for a wide operating frequency range up to 4MHz and a low power range (below 20W). It is focused on the switching losses obtained in the power MOSFETs. Main advantages of the model are the fast calculation time (below 8.5 seconds) and a good accuracy, which makes this model suitable for the optimization process of the losses in the design of a converter. It has been validated by simulation and experimentally with one GaN power transistor and three Si MOSFETs. Results show good agreement between measurements and the model