Examination of the quality of spinach leaves using hyperspectral imaging

The present research is focused on the application of hyperspectral images for the supervision of quality deterioration in ready to use leafy spinach during storage (Spinacia oleracea). Two sets of samples of packed leafy spinach were considered: (a) a first set of samples was stored at 20 °C (E-20) in order to accelerate the degradation process, and these samples were measured the day of reception in the laboratory and after 2 days of storage; (b) a second set of samples was kept at 10 °C (E-10), and the measurements were taken throughout storage, beginning the day of reception and repeating the acquisition of Images 3, 6 and 9 days later. Twenty leaves per test were analyzed. Hyperspectral images were acquired with a push-broom CCD camera equipped with a spectrograph VNIR (400–1000 nm). Calibration set of spectra was extracted from E-20 samples, containing three classes of degradation: class A (optimal quality), class B and class C (maximum deterioration). Reference average spectra were defined for each class. Three models, computed on the calibration set, with a decreasing degree of complexity were compared, according to their ability for segregating leaves at different quality stages (fresh, with incipient and non-visible symptoms of degradation, and degraded): spectral angle mapper distance (SAM), partial least squares discriminant analysis models (PLS-DA), and a non linear index (Leafy Vegetable Evolution, LEVE) combining five wavelengths were included among the previously selected by CovSel procedure. In sets E-10 and E-20, artificial images of the membership degree according to the distance of each pixel to the reference classes, were computed assigning each pixel to the closest reference class. The three methods were able to show the degradation of the leaves with storage time.

Improvement of compatibility and stability on polyethylene-modified bitumen by use of an aromatic extra as compatibilizer.

Bitumen modification by polyethylene addition usually improves the mechanical properties of the binder and, therefore, the behavior in service of the bituminous mix: thermal susceptibility and rutting can be diminished, whilst the resistance to low temperature cracking may increase. To achieve this improvement it is necessary a good compatibility between the base bitumen and the polyethylene. Low compatibility between bitumen and polyethylene can lead to phase separation: the polymer- asphalt incompatibility translates into a deterioration of ultimate properties. The object of this research project was to determine if these problems can be diminished by using certain compatibilizer agents, e.g. an aromatic extract from the oil refinery. Compatibility and stability of the polyethylene modified bitumen were studied using conventional test methods and dynamic shear reometer (DSR). Blends of bitumen and polyethylene were prepared with neat bitumen (PMB) or bitumen with compatibilizer as component of the binder (PMBC) and then compared. The experimental results show that “colloid instability index”(IC) is a parameter that can be used to control the compatibility between bitumen and polyethylene. From polyethylene point of view, one of the parameters that govern is the “melt flow index” (MFI). Experimental results show that PMBC formulated with low IC bitumen and hi gh MFI lineal polyethylene can be considered as stable binder.

Laser shock processing: an emerging technique for the improvement of fatigue life and surface properties of high reliability metallic components

•Introduction •Process Experimental Setup •Experimental Procedure •Experimental Results for Al2024 - T351, Ti6Al4V and AISI 316L - Surface Roughness and Compactation - Residual stresses - Tensile Strength - Fatigue Life •Discussion and Outlook - Prospects for technological applications of LSP

A methodology for the implementation and continuous improvement of social responsibility (RS) and financial responsibility

This work sets out an innovative methodology that aims to facilitate the implementation and continuous improvement of Social Responsibility. It is a methodology that takes account of strategic-economic, social and environmental questions and allows measuring the impact of each of these aspects on the stakeholders and on each of the value areas. It can be extrapolated to all kinds of organisations regardless of their size and sector and admits scaleable models. A marked feature that sets it aside from other methodologies is that it eliminates subjectivity from the qualitative aspects and introduces an algorithm to quantify them.

Efficiency improvement of HF communications using cognitive radio principles

Cognitive Radio principles can be applied to HF communications to make a more efficient use of the extremely scarce spectrum. In this contribution we focus on analyzing the usage of the available channels done by the legacy users, which are regarded as primary users since they are allowed to transmit without resorting any smart procedure, and consider the possibilities for our stations -over the HFDVL (HF Data+Voice Link) architecture- to participate as secondary users. Our goal is to enhance an efficient use of the HF band by detecting the presence of uncoordinated primary users and avoiding collisions with them while transmitting in different HF channels using our broad-band HF transceiver. A model of the primary user activity dynamics in the HF band is developed in this work. It is based on Hidden Markov Models (HMM) which are a powerful tool for modelling stochastic random processes, and is trained with real measurements from the 14 MHz band.

Application of high-intensity short-pulse lasers to the mechanical and surface properties improvement of high reliability metallic components by shock processing

Outline: • Introduction • Process Experimental Setup • Experimental Procedure • Experimental Results for Al2024-T351 and Ti6Al4V - Residual stresses - Tensile Strength - Fatigue Life • Discussion and Outlook - Prospects for technological applications of LSP

Evaluation and improvement of empirical models of global solar irradiation: Case study northern Spain

This paper presents a new methodology to build parametric models to estimate global solar irradiation adjusted to specific on-site characteristics based on the evaluation of variable im- portance. Thus, those variables higly correlated to solar irradiation on a site are implemented in the model and therefore, different models might be proposed under different climates. This methodology is applied in a study case in La Rioja region (northern Spain). A new model is proposed and evaluated on stability and accuracy against a review of twenty-two already exist- ing parametric models based on temperatures and rainfall in seventeen meteorological stations in La Rioja. The methodology of model evaluation is based on bootstrapping, which leads to achieve a high level of confidence in model calibration and validation from short time series (in this case five years, from 2007 to 2011). The model proposed improves the estimates of the other twenty-two models with average mean absolute error (MAE) of 2.195 MJ/m2 day and average confidence interval width (95% C.I., n=100) of 0.261 MJ/m2 day. 41.65% of the daily residuals in the case of SIAR and 20.12% in that of SOS Rioja fall within the uncertainty tolerance of the pyranometers of the two networks (10% and 5%, respectively). Relative differences between measured and estimated irradiation on an annual cumulative basis are below 4.82%. Thus, the proposed model might be useful to estimate annual sums of global solar irradiation, reaching insignificant differences between measurements from pyranometers.

Improvement of the Dynamic Performance of a Buck Converter using Controlled Current Source as an Additional Energy Path

This work is related to the improvement of the dynamic performance of the Buck converter by means of introducing an additional power path that virtually increase s the output capacitance during transients, thus improving the output impedance of the converter. It is well known that in VRM applications, with wide load steps, voltage overshoots and undershoots ma y lead to undesired performance of the load. To solve this problem, high-bandwidth high-switching frequency power converter s can be applied to reduce the transient time or a big output capacitor can be applied to reduce the output impedance. The first solution can degrade the efficiency by increasing switching losses of the MOSFETS, and the second solution is penalizing the cost and size of the output filter. The additional energy path, as presented here, is introduced with the Output Impedance Correction Circuit (OICC) based on the Controlled Current Source (CCS). The OICC is using CCS to inject or extract a current n - 1 times larger than the output capacitor current, thus virtually increasing n times the value of the output capacitance during the transients. This feature allows the usage of a low frequency Buck converter with smaller capacitor but satisfying the dynamic requirements.

Emission inventories and modeling activities for the development of air quality plans in Madrid (Spain)

1. Introduction 2. Air Quality Modeling system 3. Emission Inventories 4. Applications and Results 5. Conclusions

Detection of internal quality in kiwi with a new optical technique (TDRS)

A compact system based on time-resolved diffuse reflectance spectroscopy (TDRS) has been developed to measure internal fruit quality parameters and has been applied to the non-destructive estimation of firmness, sugar content and acidity of kiwifruits. This new optical technique, developed in medical applications and related areas, provides a complete optical characterisation of a diffusive sample as it estimates at the same time and independently the light absorption inside the tissues and the scattering across them. The working principle of the technique is the analysis of the attenuation and broadening of the time-distribution of the remitted light, and the correct interpretation with a proper theoretical model. This main advantage compared to conventional optical techniques (which are only able to register the global attenuation spectrum) added to the compact, portable prototype developed along a three-year work opens the possibilities of this new measurement method in the food industry.

Estimation of spanish bunkering at EU level of secas

On December 17 came into force on community standard marine fuels.The SOx emissions will be increased in the main shipping routes at a rate of 3 to 4% annually. Most of the sulphur burden will be attributed to shipping activity. Therefore the extension of SECAs could be beneficial towards the improvement of air quality. This paper begins with a review of the current situation SECAS and ECAS areas, highlighting the rules to be implemented shortly. The aim of the paper is known the current situation bunkering determine the estimated short term in Spain from economic variables

In vitro evaluation of commercial fibrolytic enzymes for improving the nutritive value of low-quality forages.

The aim of this work was to assess the effects of four doses of three commercial fibrolytic enzymes on ruminal fermentation of rice straw, maize stover and Pennisetum purpureum clon Cuba CT115 hay in batch cultures of ruminal micro-organisms from sheep. One enzyme was produced by Penicillium funiculosum (PEN) and two were from Trichoderma longibrachiatum (TL1 and TL2). Each liquid enzyme was diluted 200 (D1), 100 (D2), 50 (D3) and 10 (D4) - fold and applied to each substrate in quadruplicate over time and incubated for 120 h in rumen fluid. The D4 dose of each enzyme increased (P<0.05) the fractional rate of gas production and organic matter effective degradability for all substrates, and TL2 had similar effects when applied at D3. In 9 h incubations, PEN at D4, TL1 at all tested doses, and TL2 at D2, D3 and D4 increased (P<0.05) volatile fatty acid production and dry matter degradability for all substrates. The commercial enzymes tested were effective at increasing in vitro ruminal fermentation of low-quality forages, although effective doses varied with the enzyme.

Interactive Atlas of habitability. Urban data management for the improvement of habitability and coexistence

In this paper we approximate to the understanding of the hybrid city as a context of changes, produced in the perception and in the modes of inhabiting and coexisting in cities through new technologies of information and communication.

Improvement of the Dynamic Performance of a Multiphase Current Controlled Buck Converter using an Auxiliary Synchronous Buck Converter as an Additional Energy Path

This work is related to the output impedance improvement of a Multiphase Buck converter with Peak Current Mode Control (PCMC) by means of introducing an additional power path that virtually increases the output capacitance during transients. Various solutions that can be employed to improve the dynamic behavior of the converter system exist, but nearly all solutions are developed for a Single Phase Buck converter with Voltage Mode Control (VMC), while in the VRM applications, due to the high currents, the system is usually implemented as a Multiphase Buck Converter with Current Mode Control. The additional energy path, as presented here, is introduced with the Output Impedance Correction Circuit (OICC) based on the Controlled Current Source (CCS). The OICC is used to inject or extract a current n-1 times larger than the output capacitor current, thus virtually increasing n times the value of the output capacitance during the transients. Furthermore, this work extends the OICC concept to a Multiphase Buck Converter system while comparing proposed solution with the system that has n times bigger output capacitor. In addition, the OICC is implemented as a Synchronous Buck Converter with PCMC, thus reducing its influence on the system efficiency.

El fitness como factor determinante en el riesgo de discapacidad, su relación con la composición corporal y el estado cognitivo en población mayor institucionalizada y de vida independiente = Fitness as a determinant factor in the risk of disability, and its relationship to body composition and cognitive status in institutionalized elderly population and independent living

La condición física, o como mejor se la conoce hoy en día el “fitness”, es una variable que está cobrando gran protagonismo, especialmente desde la perspectiva de la salud. La mejora de la calidad de vida que se ha experimentado en los últimos años en las sociedades desarrolladas, conlleva un aumento de la esperanza de vida, lo que hace que cada vez más personas vivan más años. Este rápido crecimiento de la población mayor de 60 años hace que, un grupo poblacional prácticamente olvidado desde el punto de vista de la investigación científica en el campo de la actividad física y del deporte, cobre gran relevancia, con el fin de poder ayudar a alcanzar el dicho “no se trata de aportar años a la vida sino vida a lo años”. La presente memoria de Tesis Doctoral tiene como principal objetivo valorar los niveles de fitness en población mayor española, además de analizar la relación existente entre el fitness, sus condicionantes y otros aspectos de la salud, tales como la composición corporal y el estado cognitivo. Entendemos que para poder establecer futuras políticas de salud pública en relación a la actividad física y el envejecimiento activo es necesario conocer cuáles son los niveles de partida de la población mayor en España y sus condicionantes. El trabajo está basado en los datos del estudio multicéntrico EXERNET (Estudio Multi-céntrico para la Evaluación de los Niveles de Condición Física y su relación con Estilos de Vida Saludables en población mayor española no institucionalizada), así como en los datos de dos estudios, llevados a cabo en población mayor institucionalizada. Se han analizado un total de 3136 mayores de vida independiente, procedentes de 6 comunidades autónomas, y 153 mayores institucionalizados en residencias de la Comunidad de Madrid. Los principales resultados de esta tesis son los siguientes: a) Fueron establecidos los valores de referencia, así como las curvas de percentiles, para cada uno de los test de fitness, de acuerdo a la edad y al sexo, en población mayor española de vida independiente y no institucionalizada. b) Los varones obtuvieron mejores niveles de fitness que las mujeres, excepto en los test de flexibilidad; existe una tendencia a disminuir la condición física en ambos sexos a medida que la edad aumenta. c) Niveles bajos de fitness funcional fueron asociados con un aumento en la percepción de problemas. d) El nivel mínimo de fitness funcional a partir del cual los mayores perciben problemas en sus actividades de la vida diaria (AVD) es similar en ambos sexos. e) Niveles elevados de fitness fueron asociados con un menor riesgo de sufrir obesidad sarcopénica y con una mejor salud percibida en los mayores. f) Las personas mayores con obesidad sarcopénica tienen menor capacidad funcional que las personas mayores sanas. g) Niveles elevados de fuerza fueron asociados con un mejor estado cognitivo siendo el estado cognitivo la variable que más influye en el deterioro de la fuerza, incluso más que el sexo y la edad. ABSTRACT Fitness is a variable that is gaining in prominence, especially from the health perspective. Improvement of life quality that has been experienced in the last few years in developed countries, leads to an expanded life expectancy, increasing the numbers of people living longer. This population consisting of people of over 60 years, an almost forgotten population group from the point of view of scientific research in the field of physical activity and sport, is becoming increasingly important, with the main aim of helping to achieve the saying “do not only add years to life, but also add life to years”. The principal aim of the current thesis was to assess physical fitness levels in Spanish elderly people, of over 65 years, analyzing relationship between physical fitness, its determinants, and other aspects of health such as body composition and cognitive status. In order to establish further public health policies in relation to physical activity and active ageing it is necessary to identify the starting physical fitness levels of the Spanish population and their determinants. The work is based on data from the EXERNET multi-center study ("Multi-center Study for the Evaluation of Fitness levels and their relationship to Healthy Lifestyles in noninstitutionalized Spanish elderly"), and on data from two studies conducted in institutionalized elderly people: a total of 3136 non-institutionalized elderly, from 6 Regions of Spain, and 153 institutionalized elderly in nursing homes of Madrid. The main outcomes of this thesis are: a) sex- and age-specific physical fitness normative values and percentile curves for independent and non-institutionalized Spanish elderly were established. b) Greater physical fitness was present in the elderly men than in women, except for the flexibility test, and a trend toward decreased physical fitness in both sexes as their age increased. c) Lower levels of functional fitness were associated with increased perceived problems. d) The minimum functional fitness level at which older adults perceive problems in their ADLs, is similar for both sexes e) Higher levels of physical fitness were associated with a reduced risk of suffering sarcopenic obesity and better perceived health among the elderly. f) The elderly with sarcopenic obesity have lower physical functioning than healthy counterparts. g) Higher strength values were associated with better cognitive status with cognitive status being the most influencing variable in strength deterioration even more than sex and age.