Supporting the design and development of Project Based Learning courses.

The use of Project Based Learning has spread widely over the last decades, not only throughout countries but also among disciplines. One of the most significant characteristics of this methodology is the use of ill-structured problems as central activity during the course, which represents an important difficulty for both teachers and students. This work presents a model, supported by a tool, focused on helping teachers and students in Project Based Learning, overcoming these difficulties. Firstly, teachers are guided in designing the project following the main principles of this methodology. Once the project has been specified at the desired level of depth, the same tool helps students to finish the project specification and organize the implementation. Collaborative work among different users is allowed in both phases. This tool has been satisfactorily tested designing two real projects used in Computer Engineering and Software Engineering degrees.

Enhancing web-based learning resources with quizzes through an Authoring Tool and an Audience Response System

Quizzes are among the most widely used resources in web-based education due to their many benefits. However, educators need suitable authoring tools that can be used to create reusable quizzes and to enhance existing materials with them. On the other hand, if teachers use Audience Response Systems (ARSs) they can get instant feedback from their students and thereby enhance their instruction. This paper presents an online authoring tool for creating reusable quizzes and enhancing existing learning resources with them, and a web-based ARS that enables teachers to launch the created quizzes and get instant feedback from the class. Both the authoring tool and the ARS were evaluated. The evaluation of the authoring tool showed that educators can effectively enhance existing learning resources in an easy way by creating and adding quizzes using that tool. Besides, the different factors that assure the reusability of the created quizzes are also exposed. Finally, the evaluation of the developed ARS showed an excellent acceptance of the system by teachers and students, and also it indicated that teachers found the system easy to set up and use in their classrooms.

Análisis del rendimiento académico del alumnado de último curso de ingeniería mediante nuevas tecnologías en el proceso de enseñanza‐aprendizaje

En el marco del Espacio Europeo de Educación Superior los estudios deben de estar orientados a facilitar la movilidad de los futuros egresados para que su inclusión en mundo laboral sea global y en este contexto, los sistemas educativos deben introducir cambios en el proceso de enseñanza – aprendizaje y en la gestión. Como uno de los elementos básicos de la creación del EEES es el aprendizaje a lo largo de la vida, se deben adoptar metodologías que doten al estudiante de capacidades para poder enfrentarse a todos los retos de la vida laboral. A través de la presente investigación se trata de aportar una visión real de la aplicación efectiva de un modelo de Aprendizaje Basado en Problemas y el Método del Caso acompañados de una fuerte Acción Tutorial y el uso de la Tecnología de la Información y Comunicación en la Universidad (TIC). Se considera asimismo de gran interés para la mejora del aprendizaje conocer cuál es la opinión real de los estudiantes universitarios, ya que son los principales implicados en relación a un modelo formativo apoyado en el Aprendizaje Basado en Problemas, el Método del Caso, la Acción Tutorial y utilización de las TIC. A través de este estudio se pretende comprobar y valorar cual es la visión real que los alumnos tienen de estas aplicaciones y como las utilizan. Para ello durante los últimos cursos se ha trabajado con alumnos de los últimos cursos de la Escuela Técnica Superior de Ingeniería Civil de la Universidad Politécnica de Madrid aplicando técnicas de Aprendizaje Basado en Problemas y el Método del Caso conjuntamente con la utilización de un Modelo de Acción Tutorial y el uso de la TIC. La tarea se ha centrado en desarrollar, a lo largo de los cursos 2009-10, 2010-11, 2011-12 y 2013-14, un modelo de Acción Tutorial con los alumnos matriculados en las asignaturas de Caminos I, Caminos II, Aforos y Ordenación del Tráfico, asignaturas de la titulación de Ingeniería Técnica de Obras Públicas, y por otro lado, en la asignatura de Caminos, perteneciente a la titulación de Ingeniería Civil. Mediante cuestionarios al inicio y final del curso, se ha conocido cuál es la opinión que poseen los alumnos sobre esta acción. A continuación, durante los cursos 2010-11, 2011-12 y 2013-14 se desarrolla un modelo experimental para evaluar las mejoras, tanto de rendimiento como de adquisición de competencias, utilizando el Aprendizaje Basado en Problemas y el Método del Caso acompañados de las TIC en el proceso de enseñanza–aprendizaje como modelo de Acción Tutorial con alumnos. ABSTRACT Abstract In the frame of the European Higher Education Area, the studies must be faced to facilitate mobility of future graduates for inclusion in the workplace is global and in this context, educational systems must introduce changes in the process of education-learning and management. Since one of the basic elements of the creation of the EHEA is learning throughout life, there must be adopted methodologies that provide the student of aptitudes to be able to face all the challenges of the labor life. Through this research it is provided a real vision of the effective application of a Model of Learning Based on Problems and the Case Method accompanied by a strong Tutorial Action and the use of ITC in the University. It is also considered of great interest for the improvement of learning to know what the real opinion of the college students is, as they are the main players in relation in a training model based on Problem-Based Learning, the Case Method, the Tutorial Action and Use of ICT. Through this study it is expected to verify and assess which is the real vision that students have about these applications and how they use them. In order to achieve the goal of this research project, during the last three years I have been working with students of last courses of the Civil Engineering School of the Technical University of Madrid applying with them techniques of Problem-Based Learning and the Case Method together with the use of a Model Action Tutorial and the Use of Information Technology and Communication (ICT). The task has focused on developing, over the 2009-10, 2010-11, 2011-12 and 2013-14 courses, a model of Tutorial Action with students enrolled in the subjects of Roads I, Roads II, Traffic Gauging and Traffic Management, all of them of the old degree in Civil Engineering (1971 Study Plan), and secondly, on the subject of Roads which belong to the current degree of Civil Engineering. Using questionnaires at the beginning and end of the course the perception that students have on this action.. Then, during the 2010-11, 2011-12 and 2013-14 courses an experimental model is developed to evaluate improvements in both performance and skills acquisition, using Problem-Based Learning and the Case Method together with the ICT in Teaching-Learning Pprocess as a model of Tutorial Action with students.

Virtual Excursions: a new way to explore science in class

The educational platform Virtual Science Hub (ViSH) has been developed as part of the GLOBAL excursion European project. ViSH (http://vishub.org/) is a portal where teachers and scientist interact to create virtual excursions to science infrastructures. The main motivation behind the project was to connect teachers - and in consequence their students - to scientific institutions and their wide amount of infrastructures and resources they are working with. Thus the idea of a hub was born that would allow the two worlds of scientists and teachers to connect and to innovate science teaching. The core of the ViSH?s concept design is based on virtual excursions, which allow for a number of pedagogical models to be applied. According to our internal definition a virtual excursion is a tour through some digital context by teachers and pupils on a given topic that is attractive and has an educational purpose. Inquiry-based learning, project-based and problem-based learning are the most prominent approaches that a virtual excursion may serve. The domain specific resources and scientific infrastructures currently available on the ViSH are focusing on life sciences, nano-technology, biotechnology, grid and volunteer computing. The virtual excursion approach allows an easy combination of these resources into interdisciplinary teaching scenarios. In addition, social networking features support the users in collaborating and communicating in relation to these excursions and thus create a community of interest for innovative science teaching. The design and development phases were performed following a participatory design approach. An important aspect in this process was to create design partnerships amongst all actors involved, researchers, developers, infrastructure providers, teachers, social scientists, and pedagogical experts early in the project. A joint sense of ownership was created and important changes during the conceptual phase were implemented in the ViSH due to early user feedback. Technology-wise the ViSH is based on the latest web technologies in order to make it cross-platform compatible so that it works on several operative systems such as Windows, Mac or Linux and multi-device accessible, such as desktop, tablet and mobile devices. The platform has been developed in HTML5, the latest standard for web development, assuring that it can run on any modern browser. In addition to social networking features a core element on the ViSH is the virtual excursions editor. It is a web tool that allows teachers and scientists to create rich mash-ups of learning resources provided by the e-Infrastructures (i.e. remote laboratories and live webcams). These rich mash-ups can be presented in either slides or flashcards format. Taking advantage of the web architecture supported, additional powerful components have been integrated like a recommendation engine to provide personalized suggestions about educational content or interesting users and a videoconference tool to enhance real-time collaboration like MashMeTV (http://www.mashme.tv/).

Ampliación de un portal Wordpress para el diseño de cursos basados en la metodología PBL

La metodología PBL propone el aprendizaje basado en problemas. A grandes rasgos sugiere que el estudiante sea el protagonista de su propio aprendizaje mediante el desarrollo de proyectos. Con esa idea, el grupo de innovación educativa DMAE-DIA (Desarrollo de nuevas Metodologías de Aprendizaje/Evaluación del Departamento de Informática Aplicada), comenzó la construcción de un portal web para mostrar los principios de dicha metodología, que permitiese a los usuarios del mismo conocerla y aprender a utilizarla en un entorno colaborativo. El objetivo de este trabajo es ampliar este portal para que los usuarios sean capaces de crear, eliminar y mantener sus propios proyectos para posteriormente utilizarlos como base para su práctica docente. El trabajo se ha planteado siguiendo el paradigma de la orientación a objetos, mediante la metodología UML y siguiendo el ciclo de vida del software y se ha implementado utilizando como base el CMS Wordpress y desarrollando con los lenguajes que más adelante se especificarán. Wordpress por su parte es un sistema de gestión de contenidos dotado de gran potencia que permite, de una manera muy sencilla, construir entornos web con el mínimo esfuerzo. ABSTRACT The PBL methodology proposed problem-based learning. Roughly suggests that the student is the protagonist of their own learning by developing projects. With that, the group of educational innovation DMAE-DIA (Development of new Learning/Assessment methodologies, Department of Applied Computing) began building a web portal to show the principles of this methodology, which would allow users to know and learn to use it in a collaborative environment. The aim of this work is to extend this website so that users are able to create, delete and maintain their own projects for later use as the basis for their teaching practice. The work has been raised following the paradigm of object orientation, by following the UML methodology and software life cycle and has been implemented using as a basis the CMS Wordpress and developed with the languages that will be specified later. Meanwhile Wordpress is a content management system endowed with great power that allows,in a very simple way to build web environments with minimal effort.

RESSIST: a research object-based recommender system

The scientific method is a methodological approach to the process of inquiry { in which empirically grounded theory of nature is constructed and verified [14]. It is a hard, exhaustive and dedicated multi-stage procedure that a researcher must perform to achieve valuable knowledge. Trying to help researchers during this process, a recommender system, intended as a researcher assistant, is designed to provide them useful tools and information for each stage of the procedure. A new similarity measure between research objects and a representational model, based on domain spaces, to handle them in dif ferent levels are created as well as a system to build them from OAI-PMH (and RSS) resources. It tries to represents a sound balance between scientific insight into individual scientific creative processes and technical implementation using innovative technologies in information extraction, document summarization and semantic analysis at a large scale.

Training project management complexity in postgraduate and continuing education programs: a learning strategy in the eshe (European Space of Higher Education) framework

The objective of this paper is to address the methodological process of a teaching strategy for training project management complexity in postgraduate programs. The proposal is made up of different methods —intuitive, comparative, deductive, case study, problem-solving Project-Based Learning— and different activities inside and outside the classroom. This integration of methods motivated the current use of the concept of “learning strategy”. The strategy has two phases: firstly, the integration of the competences —technical, behavioral and contextual—in real projects; and secondly, the learning activity was oriented in upper level of knowledge, the evaluating the complexity for projects management in real situations. Both the competences in the learning strategy and the Project Complexity Evaluation are based on the ICB of IPMA. The learning strategy is applied in an international Postgraduate Program —Erasmus Mundus Master of Science— with the participation of five Universities of the European Union. This master program is fruit of a cooperative experience from one Educative Innovation Group of the UPM -GIE-Project-, two Research Groups of the UPM and the collaboration with other external agents to the university. Some reflections on the experience and the main success factors in the learning strategy were presented in the paper

Training project management complexity in postgraduate and continuing education programs: a learning strategy in the eshe (European Space of Higher Education) framework

The objective of this paper is to address the methodological process of a teaching strategy for training project management complexity in postgraduate programs. The proposal is made up of different methods —intuitive, comparative, deductive, case study, problem-solving Project-Based Learning— and different activities inside and outside the classroom. This integration of methods motivated the current use of the concept of ―learning strategy‖. The strategy has two phases: firstly, the integration of the competences —technical, behavioral and contextual—in real projects; and secondly, the learning activity was oriented in upper level of knowledge, the evaluating the complexity for projects management in real situations. Both the competences in the learning strategy and the Project Complexity Evaluation are based on the ICB of IPMA. The learning strategy is applied in an international Postgraduate Program —Erasmus Mundus Master of Science— with the participation of five Universities of the European Union. This master program is fruit of a cooperative experience from one Educative Innovation Group of the UPM -GIE-Project-, two Research Groups of the UPM and the collaboration with other external agents to the university. Some reflections on the experience and the main success factors in the learning strategy were presented in the paper.

Competence Monitoring in Project Teams by using Web based portfolio management systems

This paper reports a learning experience related to the acquisition of project management competences. Students from three different universities and backgrounds, cooperate in a common project that drives the learning-teaching process. Previous related works on this initiative have already evaluated the goodness of this multidisciplinary, project-based learning approach in the context of a new educative paradigm. Yet the innovative experience has allowed the authors to define a rubric in order to measure specific competences in project management. The study shows the rubric’s main aspects as well as competence acquisition evaluation alternatives, based in the metrics defined. Key indicators and specific reports obtained from data base fields in the web tool will support this work. As a result, new competences can be assessed, such ones like teamwork, problem solving, communication and leadership. Final goal is to provide an overall competence map to the students at the same time they improve their skills.

Teaching based on the case method of building collective protection

One of the fundamental aspects in the adaptation of the teaching to the European higher education is changing based models of teacher education to models based on student learning. In this work we present an educational experience developed with the teaching method based on the case method, with a clearly multidisciplinary. The experience has been developed in the teaching of analysis and verification of safety rails. This is a multidisciplinary field that presents great difficulties during their teaching. The use of the case method has given good results in the competences achieved by students

Modelo de Gestión del Conocimiento para la Competitividad del Sector de las Construcciones Petroleras, Petroquímicas y Energéticas Venezolanas

La construcción es una de las actividades más valiosas para la sociedad debido a la naturaleza de los servicios que ofrece y por el volumen de empleos y movimiento económico que genera. Por ello es un elemento fundamental para el desarrollo sustentable. Es una industria compleja, cada vez más dependiente del conocimiento. Debido a su naturaleza fragmentaria y temporal y la alta rotación de personal presenta grandes retos y complicaciones particulares. Estas dificultades en oportunidades pueden transformarse en problemas por la complejidad, localización geográfica o los requisitos técnicos, financieros e innovaciones de los proyectos. Debido a sus características, las construcciones sufren cambios en las condiciones planificadas. Con frecuencia estos cambios conducen a retrasos en la ejecución de los proyectos, costes superiores a los presupuestados y conflictos entre los clientes y los ejecutores. Esto genera problemas de competitividad que afectan tanto a países desarrollados como países en vías de desarrollo. Los problemas de la construcción tienen perniciosos efectos para la sociedad, que pierde recursos que deberían permitir mejores resultados en términos de calidad de vida y beneficios sociales y económicos. Debido a la importancia del sector y los ingentes recursos que se invierten en cada proyecto se justifican los máximos esfuerzos para lograr los mejores desempeños de esta industria. Éste interés ha orientado el desarrollo de investigaciones, para apoyar el logro de los objetivos de mejoramiento continuo y construcción sustentable. Los estudios desarrollados han permitido demostrar el valor añadido del conocimiento en todos los sectores productivos. Para la construcción, los conocimientos ofrecen indicadores de desempeño, datos y lecciones aprendidas provenientes de aciertos y errores. Estos deben conducir a aprendizajes fundamentales para sustentar su competitividad. Sin embargo, a pesar de los conocimientos disponibles y los avances en las técnicas de control gerencial y de proyectos, es alarmante la recurrencia de los problemas de construcción. Esta problemática se manifiesta con severidad en los proyectos de construcción industrial que se desarrollan para el sector petrolero, petroquímico y energético venezolano. El sector presenta evidentes necesidades para un mejor desempeño competitivo por la alta incidencia de retrasos de los proyectos, que implican pérdidas de gran parte de los recursos humanos, financieros, técnicos y conocimientos invertidos. Esta investigación plantea como objetivos analizar la importancia de la construcción y su sustentabilidad, los principales problemas que afectan el sector, la gestión del conocimiento y algunos modelos disponibles para gestionarlos. Igualmente examina las lecciones aprendidas y la productividad y competitividad, con particular atención a los problemas de competitividad venezolanos. Adicionalmente se evalúan las implicaciones del conocimiento como activo estratégico y se caracterizan las empresas de construcción industrial venezolanas. Para ello se identifican las dimensiones que sustentan la gestión del conocimiento en estas empresas, para finalmente determinar las que resultan más idóneas para el nuevo modelo a ser propuesto. Con estos objetivos se desarrolló el estudio empírico. Para ello fueron invitados a participar representantes de 105 empresas y expertos de construcción distintos, todos con experiencias de construcción al sector industrial venezolano. Se obtuvieron 112 respuestas en representación de 41 organizaciones y expertos diferentes. El trabajo de campo inició en Junio de 2012 y culminó en Noviembre de 2012. Los datos obtenidos fueron analizados con apoyo de técnicas estadísticas descriptivas y multivariables. Los objetivos de la investigación se alcanzaron ya que se logró caracterizar el sector de las construcciones industriales y se propuso un nuevo modelo de gestión del conocimiento adecuado a sus características. El nuevo modelo fue formulado atendiendo a criterios de sencillez, bajos costes y facilidad de adaptación para motivar su utilización en organizaciones de construcción industrial variadas. Con ello se busca que resulte de utilidad aún para las organizaciones más pequeñas, con menores recursos o aquellas que enfrentan entornos constructivos complicados. Por último se presentan algunas sugerencias para motivar la comprensión de los fenómenos estudiados en los grupos de interés de la construcción. Se propone analizar estos problemas desde las etapas iniciales de los estudios de ingeniería, de arquitectura, de construcción, de economía y administración. Igualmente se propone desarrollar acciones conjuntas de parte de los sectores académicos, gubernamentales, industriales y asociaciones para el mejoramiento competitivo y desarrollo sustentable global. La propuesta aporta datos sobre el sector constructivo venezolano en un área que presenta grandes carencias y propone un modelo innovador por su sencillez y orientación hacia el uso diario e intuitivo de los conocimientos como recursos fundamentales para la competitividad. Esta orientación puede tener trascendencia más allá del sector descrito, para apoyar la solución de problemas de otras industrias en entornos globales. ABSTRACT Construction is one of the most valuable activities for society due to the nature of the services offered and the number of jobs and revenues generated. Therefore it is a key element for sustainable development. Construction is a complex industry increasingly dependent on knowledge. Its temporary and fragmentary nature and the high staff turnover present great challenges and particular complications to construction. In some cases these conditions may evolve to serious problems because of the complexity, geographic location or even technical, financial and innovative requirements of each project. Due to their characteristics, constructions frequently undergo changes in planned conditions. Often these changes lead to delays in project completion, costs higher than budgeted and conflicts between clients and performers. This creates problems of competitiveness affecting both developed and developing countries. The construction problems have harmful effects on society, since it loses resources that would otherwise allow better results in terms of quality of life and social and economic benefits. The importance and the enormous resources invested in each project justify the efforts to achieve the best performance of this industry. This interest has guided the development of multiple research efforts to support the achievement of construction performance improvements and sustainable construction. The studies carried out have demonstrated the added value of knowledge in all productive sectors. For construction, knowledge offers performance indicators, data and lessons learned from successes and failures. These should lead to fundamental learning to sustain sector competitiveness. However, despite the available knowledge and advances in techniques and project management control, the recurrence of construction problems is alarming. This problem shows itself severely in industrial construction projects that are developed for the Venezuelan oil, petrochemical and energy sectors. These sectors have evident needs for better competitive performance because of the high incidence of project delays, involving loss of much of the human, financial, technical and knowledge resources invested. This research analyzes the importance of construction and sustainability, the main problems affecting the sector, knowledge and some models available to manage them. It also examines the lessons learned and the productivity and competitiveness, with particular attention to the problems of Venezuelan competitiveness. Additionally, the Venezuelan industrial construction companies are characterized evaluating the implications of knowledge as an strategic asset for construction. Moreover, the research evaluates the dimensions that support knowledge management in these companies, to finally identify those that are the most suitable for the new model to be proposed. With these objectives in mind the empirical study was developed. 105 different companies and experts with Venezuelan industrial construction experiences were invited to participate on the survey. 112 responses were obtained representing 41 different organizations and experts. Fieldwork started in June 2012 and ended in November 2012. The data obtained was analyzed with descriptive and multivariate statistical techniques. The research objectives were achieved since the industrial construction sector was characterized and a new management model was proposed based on the particular characteristics of these companies. The new model was formulated according to the criteria of simplicity, low cost and ease of adaptation. This was performed to motivate the use of the new model in various industrial construction organizations, even in smaller companies, with limited resources or those facing complex construction environments. Finally some suggestions to encourage understanding of the phenomena studied among construction stakeholders were proposed. The importance of studying these problems at an early stage of the engineering, architectural, construction, economic and administration studies is highlighted. Additionally, academic, government, industrial organizations and associations are invited to join efforts to improve the competitive and sustainable global development. The proposal provides data on the Venezuelan construction sector in an area that has large gaps and proposes a model which is innovative for its simplicity and suggests the daily and intuitive use of knowledge resources as a key issue to competitiveness. This orientation may have implications beyond the described sector to support the solution of problems of other industries in a global environment.

Aprendizaje integrado en arquitectura con modelos virtuales : implementación de metodología BIM en la docencia universitaria

Los procesos de diseño y construcción en Arquitectura han mostrado un desarrollo de optimización históricamente muy deficiente cuando se compara con las restantes actividades típicamente industriales. La aspiración constante a una industrialización efectiva, tanto en aras de alcanzar mayores cotas de calidad así como de ahorro de recursos, recibe hoy una oportunidad inmejorable desde el ámbito informático: el Building Information Modelling o BIM. Lo que en un inicio puede parecer meramente un determinado tipo de programa informático, en realidad supone un concepto de “proceso” que subvierte muchas rutinas hoy habituales en el desarrollo de proyectos y construcciones arquitectónicas. La inclusión y desarrollo de datos ligados al proyecto, desde su inicio hasta el fin de su ciclo de vida, conlleva la oportunidad de crear una realidad virtual dinámica y actualizable, que por añadidura posibilita su ensayo y optimización en todos sus aspectos: antes y durante su ejecución, así como vida útil. A ello se suma la oportunidad de transmitir eficientemente los datos completos de proyecto, sin apenas pérdidas o reelaboración, a la cadena de fabricación, lo que facilita el paso a una industrialización verdaderamente significativa en edificación. Ante una llamada mundial a la optimización de recursos y el interés indudable de aumentar beneficios económicos por medio de la reducción del factor de incertidumbre de los procesos, BIM supone un opción de mejora indudable, y así ha sido reconocido a través de la inminente implantación obligatoria por parte de los gobiernos (p. ej. Gran Bretaña en 2016 y España en 2018). La modificación de procesos y roles profesionales que conlleva la incorporación de BIM resulta muy significativa y marcará el ejercicio profesional de los futuros graduados en las disciplinas de Arquitectura, Ingeniería y Construcción (AEC por sus siglas en inglés). La universidad debe responder ágilmente a estas nuevas necesidades incorporando esta metodología en la enseñanza reglada y aportando una visión sinérgica que permita extraer los beneficios formativos subyacentes en el propio marco BIM. En este sentido BIM, al aglutinar el conjunto de datos sobre un único modelo virtual, ofrece un potencial singularmente interesante. La realidad tridimensional del modelo, desarrollada y actualizada continuamente, ofrece al estudiante una gestión radicalmente distinta de la representación gráfica, en la que las vistas parciales de secciones y plantas, tan complejas de asimilar en los inicios de la formación universitaria, resultan en una mera petición a posteriori, para ser extraída según necesidad del modelo virtual. El diseño se realiza siempre sobre el propio modelo único, independientemente de la vista de trabajo elegida en cada momento, permaneciendo los datos y sus relaciones constructivas siempre actualizados y plenamente coherentes. Esta descripción condensada de características de BIM preconfiguran gran parte de las beneficios formativos que ofrecen los procesos BIM, en especial, en referencia al desarrollo del diseño integrado y la gestión de la información (incluyendo TIC). Destacan a su vez las facilidades en comprensión visual de elementos arquitectónicos, sistemas técnicos, sus relaciones intrínsecas así como procesos constructivos. A ello se une el desarrollo experimental que la plataforma BIM ofrece a través de sus software colaborativos: la simulación del comportamiento estructural, energético, económico, entre otros muchos, del modelo virtual en base a los datos inherentes del proyecto. En la presente tesis se describe un estudio de conjunto para explicitar tanto las cualidades como posibles reservas en el uso de procesos BIM, en el marco de una disciplina concreta: la docencia de la Arquitectura. Para ello se ha realizado una revisión bibliográfica general sobre BIM y específica sobre docencia en Arquitectura, así como analizado las experiencias de distintos grupos de interés en el marco concreto de la enseñanza de la en Arquitectura en la Universidad Europea de Madrid. El análisis de beneficios o reservas respecto al uso de BIM se ha enfocado a través de la encuesta a estudiantes y la entrevista a profesionales AEC relacionados o no con BIM. Las conclusiones del estudio permiten sintetizar una implantación de metodología BIM que para mayor claridad y facilidad de comunicación y manejo, se ha volcado en un Marco de Implantación eminentemente gráfico. En él se orienta sobre las acciones docentes para el desarrollo de competencias concretas, valiéndose de la flexibilidad conceptual de los Planes de Estudio en el contexto del Espacio Europeo de Educación Superior (Declaración de Bolonia) para incorporar con naturalidad la nueva herramienta docente al servicio de los objetivos formativo legalmente establecidos. El enfoque global del Marco de Implementación propuesto facilita la planificación de acciones formativas con perspectiva de conjunto: combinar los formatos puntuales o vehiculares BIM, establecer sinergias transversales y armonizar recursos, de modo que la metodología pueda beneficiar tanto la asimilación de conocimientos y habilidades establecidas para el título, como el propio flujo de aprendizaje o learn flow BIM. Del mismo modo reserva, incluso visualmente, aquellas áreas de conocimiento en las que, al menos en la planificación actual, la inclusión de procesos BIM no se considera ventajosa respecto a otras metodologías, o incluso inadecuadas para los objetivos docentes establecidos. Y es esta última categorización la que caracteriza el conjunto de conclusiones de esta investigación, centrada en: 1. la incuestionable necesidad de formar en conceptos y procesos BIM desde etapas muy iniciales de la formación universitaria en Arquitectura, 2. los beneficios formativos adicionales que aporta BIM en el desarrollo de competencias muy diversas contempladas en el currículum académico y 3. la especificidad del rol profesional del arquitecto que exigirá una implantación cuidadosa y ponderada de BIM que respete las metodologías de desarrollo creativo tradicionalmente efectivas, y aporte valor en una reorientación simbiótica con el diseño paramétrico y fabricación digital que permita un diseño finalmente generativo. ABSTRACT The traditional architectural design and construction procedures have proven to be deficient where process optimization is concerned, particularly when compared to other common industrial activities. The ever‐growing strife to achieve effective industrialization, both in favor of reaching greater quality levels as well as sustainable management of resources, has a better chance today than ever through a mean out of the realm of information technology, the Building Information Modelling o BIM. What may initially seem to be merely another computer program, in reality turns out to be a “process” concept that subverts many of today’s routines in architectural design and construction. Including and working with project data from the very beginning to the end of its full life cycle allows for creating a dynamic and updatable virtual reality, enabling data testing and optimizing throughout: before and during execution, all the way to the end of its lifespan. In addition, there is an opportunity to transmit complete project data efficiently, with hardly any loss or redeveloping of the manufacture chain required, which facilitates attaining a truly significant industrialization within the construction industry. In the presence of a world‐wide call for optimizing resources, along with an undeniable interest in increasing economic benefits through reducing uncertainty factors in its processes, BIM undoubtedly offers a chance for improvement as acknowledged by its imminent and mandatory implementation on the part of governments (for example United Kingdom in 2016 and Spain in 2018). The changes involved in professional roles and procedures upon incorporating BIM are highly significant and will set the course for future graduates of Architecture, Engineering and Construction disciplines (AEC) within their professions. Higher Education must respond to such needs with swiftness by incorporating this methodology into their educational standards and providing a synergetic vision that focuses on the underlying educational benefits inherent in the BIM framework. In this respect, BIM, in gathering data set under one single virtual model, offers a uniquely interesting potential. The three‐dimensional reality of the model, under continuous development and updating, provides students with a radically different graphic environment, in which partial views of elevation, section or plan that tend characteristically to be difficult to assimilate at the beginning of their studies, become mere post hoc requests to be ordered when needed directly out the virtual model. The design is always carried out on the sole model itself, independently of the working view chosen at any particular moment, with all data and data relations within construction permanently updated and fully coherent. This condensed description of the features of BIM begin to shape an important part of the educational benefits posed by BIM processes, particularly in reference to integrated design development and information management (including ITC). At the same time, it highlights the ease with which visual understanding is achieved regarding architectural elements, technology systems, their intrinsic relationships, and construction processes. In addition to this, there is the experimental development the BIM platform grants through its collaborative software: simulation of structural, energetic, and economic behavior, among others, of the virtual model according to the data inherent to the project. This doctoral dissertation presents a broad study including a wide array of research methods and issues in order to specify both the virtues and possible reservations in the use of BIM processes within the framework of a specific discipline: teaching Architecture. To do so, a literature review on BIM has been carried out, specifically concerning teaching in the discipline of Architecture, as well as an analysis of the experience of different groups of interest delimited to Universidad Europea de Madrid. The analysis of the benefits and/or limitations of using BIM has been approached through student surveys and interviews with professionals from the AEC sector, associated or not, with BIM. Various diverse educational experiences are described and academic management for experimental implementation has been analyzed. The conclusions of this study offer a synthesis for a Framework of Implementation of BIM methodology, which in order to reach greater clarity, communication ease and user‐friendliness, have been posed in an eminently graphic manner. The proposed framework proffers guidance on teaching methods conducive to the development of specific skills, taking advantage of the conceptual flexibility of the European Higher Education Area guidelines based on competencies, which naturally facilitate for the incorporation of this new teaching tool to achieve the educational objectives established by law. The global approach of the Implementation Framework put forth in this study facilitates the planning of educational actions within a common perspective: combining exceptional or vehicular BIM formats, establishing cross‐disciplinary synergies, and sharing resources, so as to purport a methodology that contributes to the assimilation of knowledge and pre‐defined competencies within the degree program, and to the flow of learning itself. At the same time, it reserves, even visually, those areas of knowledge in which the use of BIM processes is not considered necessarily an advantage over other methodologies, or even inadequate for the learning outcomes established, at least where current planning is concerned. It is this last category which characterizes the research conclusions as a whole, centering on: 1. The unquestionable need for teaching BIM concepts and processes in Architecture very early on, in the initial stages of higher education; 2. The additional educational benefits that BIM offers in a varied array of competency development within the academic curriculum; and 3. The specific nature of the professional role of the Architect, which demands a careful and balanced implementation of BIM that respects the traditional teaching methodologies that have proven effective and creative, and adds value by a symbiotic reorientation merged with parametric design and digital manufacturing so to enable for a finally generative design.

Un nuevo sistema de gobernanza para afrontar los retos del siglo XXI en la educación universitaria en Perú basado en el modelo de análisis de políticas

Un nuevo sistema de gobernanza para afrontar los retos del siglo XXI en la educación universitaria en Perú basado en el modelo de análisis de políticas, surge de observar el efecto de la competencia en los mercados, de la distribución de los escasos recursos según productividad y rendimiento, y de la gestión ineficiente de las universidades ya que estos parámetros están cambiando los criterios de confianza y legitimidad del sistema universitario en Perú. Las universidades se perciben más como instituciones del sector público, mientras que los servicios que ofrecen deben más bien contribuir a la modernización de la sociedad emergente y a la economía del conocimiento. Las reformas universitarias- iniciadas en los años 80 - han estado inspiradas en las organizaciones universitarias exitosas que han logrado modificar su gobernanza y van dirigidas a transformar ciertas instituciones burocráticas en organizaciones capaces de desempeñar la función de actores en esta competición global por los recursos y los mejores talentos. En este contexto, la universidad peruana se enfrenta a dos grandes desafíos: el de adaptarse a las nuevas perspectivas mundiales, y el poder dar mejor respuesta a las demandas, necesidades y expectativas de la sociedad. Un cambio en el sistema de gobernanza para la educación superior universitaria dará una solución integral a estos desafíos permitiéndole enfrentar los problemas de la universidad para su desarrollo e inserción en las corrientes mundiales. La metodología planteada en la investigación es cualitativa parte del análisis de la realidad como un TODO, sin reducirlos a sus partes integrantes, con la interpretación de los hechos, buscando entender las variables que intervienen. Se propone una política para la educación universitaria en Perú que se permeabilice a la sociedad, cambiando el modelo de planificación de un modelo de reforma social a un modelo de análisis de políticas, donde el Estado Peruano actúe como único responsable de responder a la sociedad demandante como su representante legal, y con unos organismo externo e independiente que siente las bases de la práctica, como se está haciendo en muchos modelos universitarios del mundo. Esta investigación presenta una primera fase conceptual, que aborda la evolución histórica de las universidades en el Perú, analizando y clarificando las fuerzas impulsoras a través del tiempo y distinguir las principales líneas que le imprimen dirección y sentido a los cambios de una realidad educativa universitaria. Así mismo, en esta fase se hace un análisis de la situación actual de las universidades en el Perú para llegar a determinar en qué situación se encuentra y si está preparada para enfrentar los retos de la educación universitaria mundial, para esto se analizan los modelos universitarios de mayor prestigio en el mundo. El marco teórico anterior permite sentar, en una segunda fase de la investigación, las bases científicas del modelo que se propone: el modelo de planificación de análisis de políticas para el sistema universitario peruano. Este modelo de ámbito público propuesto para la educación universitaria peruana basa su estrategia en un modelo de planificación con un objetivo común: “Mejorar la calidad de la educación superior universitaria peruana con el fin de aumentar la empleabilidad y la movilidad de los ciudadanos así como la competitividad internacional de la educación universitaria en Perú”, y con unas líneas de acción concretadas en cuatro objetivos específicos: 1) competencias (genéricas y específicas de las áreas temáticas); 2) enfoques de enseñanza, aprendizaje y evaluación; 3) créditos académicos; 4) calidad de los programa. Así como los fundamentos metodológicos del modelo de análisis de políticas, utilizado como estructura política, teniendo en cuenta las características básicas del modelo: a) Planificación desde arriba; b) Se centra en la toma de decisiones; c) Separación entre conocimiento experto y decisión; d) El estudio de los resultados orienta el proceso decisor. Finalmente, se analiza una fase de validación del modelo propuesto para la educación superior universitaria peruana, con los avances ya realizados en Perú en temas de educación superior, como es, el actual contexto de la nueva Ley Universitaria N°30220 promulgada el 8 de julio de 2014, la creación del SUNEDU y la reorganización del SINEACE, que tienen como propósito atender la crisis universitaria centrada en tres ejes principales incluidos en la ley, considerados como bases para una reforma. Primero, el Estado asume la rectoría de las políticas educativas en todos los niveles educativos. El segundo aspecto consiste en instalar un mecanismo de regulación de la calidad que junto con la reestructuración de aquellos otros existentes debieran sentar las bases para que las familias y estudiantes tengan la garantía pública de que el servicio que se ofrece, sin importar sus características particulares, presenten un mínimo común de calidad y un tercer aspecto es que la ley se reafirma en que la universidad es un espacio de construcción de conocimiento basado en la investigación y la formación integral. Las finalidades, la estructura y organización, las formas de graduación, las características del cuerpo docente, la obligatoriedad por los estudios generales, etc., indican que la reflexión académica es el centro articulador de la vida universitaria. Esta validación también se ha confrontado con los resultados de las entrevistas cualitativas a juicio de experto que se han realizado a rectores de universidades públicas y privadas así como a rectores miembros de la ex ANR, miembros de organizaciones como CONCYTEC, IEP, CNE, CONEAU, ICACIT e investigadores en educación superior, con la finalidad de analizar la sostenibilidad del modelo propuesto en el tiempo. Los resultados evidencian, que en el sistema universitario peruano se puede implementar un cambio hacía un modelo de educación superior universitaria, con una política educativa que se base en un objetivo común claramente definido, un calendario para lograrlo y un conjunto objetivos específicos, con un cambio de estructura política de reforma social a un modelo de análisis de políticas. Así mismo se muestran los distintos aspectos que los interesados en la educación superior universitaria deben considerar, si se quiere ocupar un espacio en el futuro y si interesa que la universidad peruana pueda contribuir para que la sociedad se forje caminos posibles a través de una buena docencia que se refleje en su investigación, con alumnos internacionales, sobre todo, en los postgrados; con un investigación que se traduzca en publicaciones, patentes, etc., de impacto mundial, con relevancia en la sociedad porque contribuye a su desarrollo, concretándose en trabajos de muy diversos tipos, promovidos junto con empresas, gobiernos en sus diversos niveles, instituciones públicas o privadas, etc., para que aporten financiación a la universidad. ABSTRACT A new system of governance to meet the challenges of the twenty-first century university education in Peru based on the model of policy analysis, comes to observe the effect of market competition, distribution of scarce resources according to productivity and performance, and inefficient management of universities as these parameters are changing the criteria of trust and legitimacy of the university system in Peru. Universities are perceived more as public sector institutions, while the services provided should rather contribute to the modernization of society and the emerging knowledge economy. The-university reforms initiated in the 80s - have been inspired by successful university organizations that have succeeded in changing its governance and as attempting to transform certain bureaucratic institutions into organizations that act as actors in this global competition for resources and top talent. In this context, the Peruvian university faces two major challenges: to adapt to the new global outlook, and to better respond to the demands, needs and expectations of society. A change in the system of governance for university education give a comprehensive solution to address these challenges by allowing the problems of the university development and integration into global flows. The methodology proposed in this research is qualitative part of the analysis of reality as a whole, without reducing them to their constituent parts, with the interpretation of the facts, seeking to understand the variables involved. a policy for university education in Peru that permeabilizes society is proposed changing the planning model of a model of social reform a model of policy analysis, where the Peruvian State to act as the sole responsible for responding to the applicant as its legal representative, and with external and independent body that provides the basis of practice, as is being done in many university models in the world. This research presents an initial conceptual phase, which deals with the historical development of universities in Peru, analyzing and clarifying the driving forces over time and distinguish the main lines that give direction and meaning to changes in university educational reality. Also, at this stage an analysis of the current situation of universities in Peru is done to be able to determine what the situation is and whether it is prepared to meet the challenges of the global higher education, for this university models are analyzed most prestigious in the world. The above theoretical framework allows to lay in a second phase of research, the scientific basis of the model proposed: the planning model of policy analysis for the Peruvian university system. This proposed model of public sphere for the Peruvian college bases its strategy on a planning model with a common goal: "To improve the quality of the Peruvian university education in order to enhance the employability and mobility of citizens and the international competitiveness of higher education in Peru ", and lines of action materialized in four specific objectives: 1) competences (generic and specific subject areas); 2) approaches to teaching, learning and assessment; 3) credits; 4) quality of the program. As well as the methodological foundations of policy analysis model, used as political structure, taking into account the basic characteristics of the model: a) Planning from above; b) focuses on decision making; c) Separation between expertise and decision; d) The study of the results process guides the decision maker. Finally, a validation phase of the proposed Peruvian university higher education, with the progress already made in Peru on issues of higher education model is analyzed, as is the current context of the new University Law No. 30220 promulgated on July 8 2014, the creation of SUNEDU and reorganization of SINEACE, which are intended to serve the university crisis centered on three main areas included in the law, considered as the basis for reform. First, the State assumes the stewardship of education policies at all educational levels. The second aspect is to install a mechanism for regulating the quality along with the restructuring of those existing ones should lay the foundation for families and students to guarantee that public service is offered, regardless of their individual characteristics, are of common minimum quality and a third aspect is that the law reaffirms that the university is building a space of research-based knowledge and comprehensive training. The aims, structure and organization, forms of graduation, faculty characteristics, the requirement for the general studies, etc., indicate that the academic reflection is the coordinating center of university life. This validation has also been confronted with the results of qualitative interviews with expert judgment that has been made to directors of public and private universities as well as leading members of the former ANR members of organizations like CONCYTEC, IEP, CNE, CONEAU, ICACIT and researchers in higher education, in order to analyze the sustainability of the proposed model in time. The results show, that the Peruvian university system can implement a change to a model of university education, an educational policy based on clearly defined common goal, a timetable for achieving specific objectives set and, with a change social policy structure to a model of reform policy analysis. It also shows the various aspects that those interested in university education should consider, if you want to occupy a space in the future and if interested in the Peruvian university can contribute to society possible paths is forged through research good teaching, international students, especially in graduate programs; with research that results in publications, patents, etc., global impact, relevance to society because it contributes to their development taking shape in very different types of jobs, promoted with businesses, governments at various levels, public institutions or private, etc., to provide funding to the university.

Building Trust for Lambda-Congenial Secret Groups

Establishing trust while preserving privacy is a challenging research problem. In this paper we introduce lambda -congenial secret groups which allow users to recognize trusted partners based on common attributes while preserving their anonymity and privacy. Such protocols are different from authentication protocols, since the latter are based on identities, while the former are based on attributes. Introducing attributes in trust establishment allows a greater flexibility but also brings up several issues. In this paper, we investigate the problem of building trust with attributes by presenting motivating examples, analyzing the security requirements and giving an informal definition. We also survey one of the most related techniques, namely private matching, and finally present solutions based on it.

How Blended Learning Reduce Underachievement in Higher Education: An Experience in Teaching Computer Sciences.

This paper presents a blended learning approach and a study evaluating instruction in a software engineering-related course unit as part of an undergraduate engineering degree program in computing. In the past, the course unit had a lecture-based format. In view of student underachievement and the high course unit dropout rate, a distance-learning system was deployed, where students were allowed to choose between a distance-learning approach driven by a moderate constructivist instructional model or a blended-learning approach. The results of this experience are presented, with the aim of showing the effectiveness of the teaching/learning system deployed compared to the lecture-based system previously in place. The grades earned by students under the new system, following the distance-learning and blended-learning courses, are compared statistically to the grades attained in earlier years in the traditional face-to-face classroom (lecture-based) learning.