Results of energy-loss measurements on passenger car tires operating in the free-rolling and braking/traction modes. Final report.

Transportation Systems Center, Cambridge, Mass.

Laboratory and full-scale parametric studies of the rolling resistance of radial- and bias-ply heavy service truck tires. Final report.

National Highway Traffic Safety Administration, Office of Heavy Duty Vehicle Research, Washington, D.C.

Results of rolling resistance measurements on twelve radial passenger car tires.

National Highway Traffic Safety Administration, Office of Research and Development, Washington, D.C.

Floating tire breakwater tests, Pickering Beach, Delaware /

Mode of access: Internet.

Determination of mooring load and transmitted wave height for a floating tire breakwater /

"September 1979."

Prototype scale mooring load and transmission tests for a floating tire breakwater /

Prototype scale tests of the mooring load and wave transmission characteristics of a floating tire breakwater were conducted in the large wave tank at the Coastal Engineering Research Center. Standard Goodyear Tire and Rubber Co. 18-tire modules connected to form breakwaters, 4 and 6 modules (8.5 and 12.8 meters, 28 and 42 feet) wide in the direction of wave advance, were tested in water depths of 2 and 4 meters (6.56 and 13.12 feet). Monochromatic waves with a 2.64- to 8.25-second period range and heights up to 1.4 meters (4.6 feet) were used in the tests. Test results indicate that wave transmission is mainly a function of the breakwater width to incident wavelength ratio with a slight dependence on the incident wave height. However, the mooring forces are mainly a function of the incident wave height with only a slight dependence on the incident wavelength and breakwater width. Recommended design curves for the wave transmission coefficient versus breakwater width to wavelength ratio and mooring load as a function of incident wave height are presented. (Author).