5 resultados para Drying process

em Instituto Politécnico de Viseu


Relevância:

100.00% 100.00%

Publicador:

Resumo:

This study is aimed to determine the properties of Nantes carrots while drying by hot air at three different temperatures (50, 60 and 70 ºC). The chemical properties evaluated were: moisture, pro- tein, fibre, ash, sugars and water activity, and the physical properties were: texture, color, density and porosity. The results showed that the drying at 70 ºC affected mostly the chemical properties analyzed. Regarding the texture, similar changes were recorded in terms of hardness, gumminess and chewiness at the temperature of 70 ºC that affected these properties the most. Regarding color, in general the vari- ations in a* and b* along drying were not meaningful, although some discoloration was observed (in- crease in L*). The porosity increased due to the decrease in humidity. The final porosity measured for the carrots dried at 70 ºC was; however, lower than those for 50 and 60 ºC.

Relevância:

70.00% 70.00%

Publicador:

Resumo:

The peppers can be very diverse, from sweet to hot peppers, varying in shape, in colour, in properties and usages. While some are eaten in the fresh state, many of them undergo a drying process to be preserved for a longer time and to increase availability and convenience. Hence, after harvesting, in many cases a drying operation is involved, and the present chapter aims to address this operation, of pivotal importance. In ancient times, the drying of foods in general and peppers in particular was done by exposure to the solar radiation. However, despite its cheapness and easiness, this process involved many drawbacks, like long drying times, probability of adverse atmospheric conditions and contaminations of the product. Hence, nowadays its usage is reduced. The most popular industrial drying method is the hot air convective drying. However, the high temperatures to which the product is exposed can cause changes in the composition and nutritional value as well as in the physical properties or organoleptic quality of the products. Other alternative methods can be used, but sometimes they are more expensive or more time consuming, such as is the case of freeze drying. Still, this last also has visible advantages from the quality point of view, minimizing the changes in texture, colour, flavour or nutrients. The knowledge of adequate drying operating conditions allows the optimization of the product characteristics, and hence to know the drying kinetics or the isotherms is fundamental to properly design the most adequate drying processes, and therefore preserve the organoleptic characteristics as well as the bioactive compounds present.

Relevância:

70.00% 70.00%

Publicador:

Resumo:

This paper presents an experimental study on the evolution of carrot properties along convective drying by hot air at different temperatures (50ºC, 60ºC and 70ºC). The thermo-physical properties calculated were: specific heat, thermal conductivity, diffusivity, enthalpy, heat and mass transfer coefficients. Furthermore, the data of drying kinetics were treated and adjusted according to the three empirical models: Page, Henderson & Pabis and Logarithmic. The sorption isotherms were also determined and fitted using the GAB model. The results showed that, generally, the thermo-physical properties presented a decline during the drying process, and the decrease was faster for the temperature of 70ºC. It was possible to verify that the Page model presented the best prediction ability for the representation of kinetics of the drying process. The GAB model used to fit the sorption isotherms showed a good prediction capacity and, at a given water activity, despite some variations, the amount of water sorbed increased with the decrease of drying temperature.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Este trabalho teve como objetivo a determinação das propriedades da cenoura (Daucus carota L.), da variedade Nantes, antes, durante e após a secagem por convecção a três temperaturas diferentes (50, 60 e 70 ºC).De forma a verificar as alterações ao nível de diferentes propriedades, tais como: propriedades químicas (humidade, proteínas, fibras, cinzas, açúcares e 'aw') propriedades físicas (textura, cor, porosidade e densidade) e propriedades termofísicas (calor específico, condutividade térmica, difusividade e entalpia). Dos resultados obtidos foi possível concluir que a temperatura de secagem de 70 º C foi a que mais afetou as propriedades químicas analisadas, tais como a humidade, proteínas e açúcares redutores, onde estes sofreram uma diminuição ao longo das secagens. A 'aw' também apresentou uma diminuição ao longo das secagens, onde apresentou um menor valor na secagem a 70 ºC, tendo passado de 0,97 para 0,69, enquanto as temperaturas de 50 ºC e 60 ºC apresentaram um valor final igual, de 0,74. No que diz respeito às propriedades físicas, verificou-se que em relação à textura registaram-se evoluções semelhantes em termos de dureza, mastigabilidade e gomosidade, na medida em que sofreram uma acentuada diminuição nas primeiras horas de secagem, e a temperatura de 70 ºC foi a que mais afetou estas propriedades. No caso da cor a temperatura de 60 ºC foi a que provocou uma maior diferença de cor, a qual ao longo da secagem esta foi aumentando. A porosidade sofreu um aumento com as secagens devido à diminuição da humidade, no entanto a temperatura de 70 ºC foi a que obteve uma menor porosidade, e as temperaturas de 50 ºC e 60 ºC apresentaram valores de porosidade semelhantes. As propriedades termofísicas registaram uma diminuição ao longo da secagem, onde o calor específico sofreu uma maior diminuição com a temperatura de 70 ºC, passando de 3,90 kJ/kg.K para 1,99 kJ/kg.K. A condutividade térmica também sofreu uma maior diminuição com a temperatura de 70 ºC, diminuindo de 0,5243 W/m.K para 0,2782 W/m.K. A difusividade foi de igual forma afetada pela temperatura de 70 ºC, tendo diminuído de 1,50×10-7 m2/s para 1,06×10-7 m2/s. No caso da entalpia, esta sofreu uma maior diminuição com a temperatura de 50 ºC, passando de 233 J/kg para 96,7 J/kg. As isotérmicas de sorção foram ajustadas ao modelo de GAB, onde se verificou que apesar de algumas oscilações a quantidade de água sorvida a uma determinada aw, aumentou com a diminuição da temperatura.Os dados da cinética de secagem foram tratados e ajustados de acordo com três modelos: Page, Henderson & Pabis e Logarítmico, tendo-se verificado que o modelo de Page foi o que mostrou melhor descrever os processos em estudo, enquanto o pior modelo para descrever a cinética de secagem foi o Logarítmico.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Kiwi fruit is a highly nutritional fruit due to the high level of vitamin C and its strong antioxidant capacity due to a wide number of phytonutrients including carotenoids, lutein, phenolics, flavonoids and chlorophyll [1]. Drying consists of a complex process in which simultaneous heat and mass transfer occur. Several alterations occur during the drying of foods at many levels (physical, chemical, nutritional or sensorial) which are influenced by a number of factors, including processing conditions [2]. Temperature is particularly important because of the effects it produces at the chemical and also at the physical level, particularly colour and texture [3]. In the present work were evaluated the changes in sliced kiwi when exposed to air drying at different temperatures (50, 60, 70, 80 ºC), namely in terms of some chemical properties like ascorbic acid or phenolic compounds, physical characteristics like colour and texture and also at the sensorial level. All experiments followed standard established procedures and several replicates were done to assess each property. The results obtained indicated that moisture was reduced with drying by 74 to 87%, depending on the temperature. Also ascorbic acid decreased with drying, being 7% for 50 ºC and increasing up to 28% for the highest temperature (80 ºC). The phenolic compounds and antioxidant activity were also very much affected by the drying temperature. The water activity of the dried samples varied from 0.658 to 0.753, being compatible with a good preservation. Regarding colour, the total colour difference between the dried samples and the fresh sample was found to vary in the range 9.45 – 17.17. The textural parameters were also much affected by drying, namely hardness which decreased by 45 to 72 %, and all other parameters increased: cohesiveness (approximately doubled), springiness (increased 2 to 3 times) and chewiness which increased up to 2.5 times that off the fresh sample. Adhesiveness, which was observed for the fresh samples (-4.02 N.s) disappeared in all the dried samples. The sensorial analysis made to the dried samples allowed establishing the sensorial profiles as shown in Figure 1.