Interictal arterial spin-labeling MRI perfusion in intractable epilepsy

INTRODUCTION: Magnetic resonance imaging (MRI) is required for the investigation of surgically intractable epilepsy. In addition to the standard MRI techniques, perfusion sequences can be added to improve visualization of underlying pathological changes. Arterial spin-labeling (ASL) MRI perfusion does not require contrast administration and, for this reason, may have advantages in these patients. METHODS: We report here on 16 patients with epilepsy who underwent MRI of the brain with ASL and positron emission tomography (PET). RESULTS: Despite a slightly reduced resolution with ASL, we found a correlation between ASL, PET and electrophysiological data, with hypoperfusion on ASL that corresponded with hypoperfusion on interictal PET. CONCLUSION: Given the correlation between ASL and PET and electrophysiology, perfusion with ASL could become part of the standard work-up in patients with epilepsy.

A tale of oversimplification and deregulation: the mainstream approach to labour market segmentation and the recent responses to the crisis in European countries. WP C.S.D.L.E. “Massimo D’Antona”.INT – 102/2013

After advocating flexibilization of non-standard work contracts for many years, some European and international institutions and several policy makers now indicate the standard employment relationship and its regulation as a cause of segmentation between the labour market of "guaranteed" insiders, employed under permanent contracts with effective protection against unfair dismissal, and the market of the “not-guaranteed” outsiders, working with non-standard contracts. Reforms of employment legislation are therefore being promoted and approved in different countries, allegedly aiming to balance the legal protection afforded to standard and non-standard workers. This article firstly argues that this approach is flawed as it oversimplifies reasons of segmentation as it concentrates on an “insiders-outsiders” discourse that cannot easily be transplanted in continental Europe. After reviewing current legislative changes in Italy, Spain and Portugal, it is then argued that lawmakers are focused on “deregulation” rather than “balancing protection” when approving recent reforms. Finally, the mainstream approach to segmentation and some of its derivative proposals, such as calls to introduce a “single permanent contract”, are called into question, as they seem to neglect the essential role of job protection in underpinning the effectiveness of fundamental and constitutional rights at the workplace.

Exchange rate overvaluation under hyperinflation: The case of Peru

This dissertation examines the behavior of the exchange rate under two different scenarios. The first one is characterized by, relatively, low inflation or a situation where prices adjust sluggishly. The second is a high inflation economy where prices respond very rapidly even to unanticipated shocks. In the first one, following a monetary expansion, the exchange rate overshoots, i.e. the nominal exchange rate depreciates at a faster pace than the price level. Under high levels of inflation, prices change faster than the exchange rate so the exchange rate undershoots its long run equilibrium value.^ The standard work in this area, Dornbusch (1976), explains the overshooting process in the context of perfect capital mobility and sluggish adjustment in the goods market. A monetary expansion will make the exchange rate increase beyond its long run equilibrium value. This dissertation expands on Dornbusch's model and provides an analysis of the exchange rate under conditions of currency substitution and price flexibility, characteristics of the Peruvian economy during the hyper inflation process that took place at the end of the 1980's. The results of the modified Dornbusch model reveal that, given a monetary expansion, the change in the price level will be larger than the change in the exchange rate if prices react more than proportionally to the monetary shock.^ We will expect this over-reaction in circumstances of high inflation when the velocity of money is increasing very rapidly. Increasing velocity of money, gives rise to a higher relative price variability which in turn contributes to the appearance of new financial (and also non-financial) instruments that report a higher return than the exchange rate, causing people to switch their demand for foreign exchange to this new assets. In the context of currency substitution, economic agents hoard and use foreign exchange as a store of value. The big decline in output originated by hyper inflation induces people to sell this hoarded money to finance current expenses, increasing the supply of foreign exchange in the market. Both, the decrease in demand and the increase in supply reduce the price of foreign exchange i.e. the real exchange rate. The findings mentioned above are tested using Peruvian data for the period January 1985-July 1990, the results of the econometric estimation confirm our findings in the theoretical model. ^

Implementação LEAN: padronização e auditorias numa linha de pintura industrial

O presente relatório centra-se na aplicação de um sistema de padronização numa célula de pintura industrial. Assim, e como a célula estudada não tinha no momento um sistema de padronização implementado, a principal motivação deste trabalho prendeu-se com a obtenção de benefícios que a normalização de boas práticas pode trazer aos processos, principalmente em indústrias extremamente competitivas, como é o caso do setor em que a empresa em estudo se insere. Para sustentar a implementação da padronização na célula de pintura foi primariamente realizado um estudo teórico sobre a metodologia de base: o LEAN, assim como sobre algumas das suas principais ferramentas. Em particular, destaca-se o Standard Work, ou Padronização, e a Auditoria. Fazendo uso deste levantamento bibliográfico e dos recursos presentes na empresa de acolhimento, foi assim gerado e implementado um sistema padronizado na célula de pintura, composto essencialmente por padrões de tarefas e documentação. Estes têm como principal função criar fundações de base fiável e íntegra, servindo de apoio ao controlo da qualidade, resolução de problemas, e implementação de melhorias no futuro industrial da célula visada. De modo complementar, foi também produzido um conjunto de propostas de implementações de novos métodos, incidindo principalmente na melhoria da qualidade de execução das operações de setup.

Ferramentas Lean na indústria corticeira

O presente projeto tem como objetivo a aplicação de ferramentas do universo Lean Thinking na indústria corticeira de forma a identificar e eliminar fontes de desperdício, criar valor e envolver a organização numa cultura de melhoria contínua focada na satisfação do cliente. A Unidade Industrial de Lamas encontra-se a passar por uma fase de mudança e carece da aplicação de ferramentas 5S, Gestão Visual, Kaizen Diário e Standard Work, contempladas no seu programa de melhoria contínua intitulado de Cork.MAIS. A aplicação das ferramentas comprovam o sucesso em termos de qualidade e eficiência operacional. Os 5S conduzem à eficiência, segurança e organização dos postos de trabalho e quando implementados despoletam de forma natural a necessidade de implementação da ferramenta Gestão Visual que acarreta inúmeros benefícios visto que visa sistemas simples e intuitivos. A ferramenta Kaizen Diário contribuiu para aumentar a comunicação entre os diferentes turnos, alinhar os colaboradores com a estratégia da Unidade Industrial de Lamas e identificar oportunidades de melhoria fomentando o trabalho em equipa. A ferramenta Standard Work contribuiu para a redução dos encravamentos dos equipamentos SVE obtendo-se um aumento de 11% do Overall Equipment Effectiveness. Realizar uma retrospetiva de todos os processos e fluxos de produção tornou-se oportuno e, para tal, recorreu-se à ferramenta Value Stream Mapping. Todo o trabalho em equipa serviria para analisar o estado atual da cadeia de valor da Unidade Industrial de Lamas no que respeita ao planeamento e fluxos de material e informação, metodologia do controlo de produto e processo e eficiência operacional. Todas as oportunidades de melhoria identificadas e implementadas acrescentam valor à cadeia da organização mas dá-se destaque às ações de melhoria implementadas no âmbito do projeto de planeamento e fluxos de informação e material. Todas as novas ferramentas implementadas contempladas no sistema pull da organização conduziram a uma redução de 11% do material em work in process e um aumento de 25% da taxa de satisfação de encomendas.

The effect of maternal employment on adolescents' transition to young adulthood

The purpose of this study was to examine relationships between multiple characteristics of maternal employment, parenting practices, and adolescents’ transition outcomes to young adulthood. The research addressed four main research questions. First, are the characteristics of maternal work (i.e., hours worked, multiple jobs held, work schedules, earnings, and occupation) related to adolescents’ enrollment in post-secondary education, employment, or involvement in neither of these types of activities as young adults? Second, are the work characteristics related to parental involvement and monitoring, and are the parenting practices related to adolescents’ transition outcomes? Third, do parental involvement and monitoring mediate any relationships between the characteristics of maternal employment and adolescents’ transition outcomes? Finally, do any associations between characteristics of maternal employment and parenting practices and adolescents’ transition outcomes vary by poverty status, race/ethnicity, or gender? To address these research questions, secondary data analysis was conducted, using data from the National Longitudinal Survey of Youth (NLSY) from 1998 through 2004. The study sample consisted of 849 youths who were 15 through 17 years of age in either 1998 or 2000, and were 19 through 21 years of age when their transition outcomes in young adulthood were measured four years later. Multinomial logistic and ordinary least squares regression models were estimated to answer the research questions. Study findings indicated that of the maternal work characteristics, mothers’ multiple jobs held, occupation, and work schedule were significantly related to the youths’ transition outcomes. When mothers held multiple jobs for 1 to 25 weeks per year, and when mothers held jobs involving lower levels of occupational complexity, their youths were more likely to experience employment rather than post-secondary education. Adolescents whose mothers worked a standard work schedule were less likely to experience other types of transitions than post-secondary education. With regard to the effects of maternal employment on parenting practices, none of the maternal work variables were related to parental involvement, and only one variable, mothers working less than 40 hours per week, was negatively related to parental monitoring. In addition, when parents were more involved with their youths’ education, the youths were less likely to transition into employment and other types of transitions rather than post-secondary education. The parenting practices did not mediate the relation between the significant work variables (holding multiple jobs, work schedule, and occupation) and youths’ transition outcomes. Finally, none of the interactions between maternal work characteristics and poverty status, race/ethnicity, and gender met the criteria for determining significance; but in a series of sub-group analyses, some differences according to poverty status and gender were found. Despite the lack of mediation and moderation, the findings of this study have important implications for social policy and social work intervention. Based on the findings, suggestions are made in these areas to improve working mothers’ lives and their adolescents’ development and successful transition to adulthood. Finally, directions for future research are discussed.

Melhoria de uma linha de montagem pela aplicação da filosofia Lean

Este relatório descreve o desenvolvimento de um projecto de melhoria numa linha de montagem de autocarros, numa das empresas do Grupo Salvador Caetano: a CaetanoBus. Sustentado teoricamente pelos pressupostos da filosofia lean, o projecto visou sobretudo uma organização mais eficiente dos recursos humanos e materiais, de modo a alcançar uma redução do lead time e, por conseguinte, uma diminuição simultânea de desperdícios associados ao processo e do número de colaboradores afectos a determinado modelo de autocarro. A metodologia adoptada envolveu fundamentalmente operações relativas ao estudo de tempos, balanceamento e estabelecimento de standard works. Por outro lado, outros conceitos associados ao lean, como kaizen e yamazum chart, integraram igualmente a linha estruturante de pensamento que orientou o campo das acções. Um plano de melhorias baseado no uso das ferramentas lean sugere ganhos produtivos, muito embora o término da produção do modelo, alvo de análise, tivesse impedido a sua confirmação prática nesta matéria.

TROMBONE MUSIC OF SCANDINAVIA: A STUDY OF TROMBONE SOLO AND CHAMBER WORKS FROM SWEDEN, NORWAY, AND DENMARK

This dissertation project aims to establish Scandinavian trombone solo and chamber works as a major contribution to the trombone repertoire. From the late 19th century to modern day, Scandinavian composers have produced a steady output of trombone works of substantial musical quality. Deep-rooted in the traditions of strong military wind bands, Scandinavia has also produced an unusual number of trombone virtuosos, ranging from those holding positions in leading orchestras, and internationally renowned pedagogues, to trombonists enjoying careers as soloists. In this study I propose that it is the symbiotic relationship between strong performers and traditionally nationalist composers that created the fertile environment for the large number of popular trombone solo and chamber repertoire not seen in any other region besides the Paris Conservatory and its infamous test pieces. I also interpret the selected repertoire through the prism of nationalism and influence of folk music, and convey that the allure of the mystic Nordic folk influences enhances the appeal of the Scandinavian trombone repertoire to world-wide audiences and performers. The dissertation project was realized over three solo recitals, each showcasing the music of Sweden, Norway, and Denmark respectively. For each program, I looked to choose a standard work from the trombone solo repertoire, a work written for or by a native virtuoso, and a lesser-known work that warrants the attention of other performers for its musical qualities. The recital of Swedish music presented Mandrake in the Corner by Christian Lindberg, Subadobe by Frederik Högberg, A Christian Song by Jan Sandström, and Concertino for trombone and strings by Lars-Erik Larsson. The recital of Norwegian music presented Concerto for Trombone op. 76 by Egil Hovland, Ordner Seg by Øystein Baadsvik, Elegi by Magne Amdahl, and Concerto in F major by Ole Olsen. The recital of Danish music presented Rapsodia Borealis by Søren Hyldgaard, Madrigal by Bo Gunge, Romance for trombone and piano by Axel Jørgensen, Concerto for trombone by Launy Grøndahl, and Three Swedish Tunes by Mogens Andresen. Through the performance of works from these three countries, the dissertation establishes Scandinavia as a rich source of solo trombone repertoire perpetuated by nationalist composers and virtuosos, as well as providing a brief survey of Scandinavian trombone works of various instrumentation and difficulty levels to be enjoyed by student, professional, and amateur performers and their audience.

The Use of Cryogenic Air in Supplied Air Respiratory Protection

The Mine Improvement and New Emergency Response (MINER) Act of 2006 implemented new regulations in the underground coal mining industry that allow for the certification of non-compressed gas equipment for respiratory protection in underground coal mines. NASA’s Kennedy Space Center (KSC) Biomedical Research and Engineering Laboratory (BRL) is investigating the potential to expand cryogenic air supply systems into the mining and general industries. These investigations have, so far, resulted in four separate comparison and hardware development programs. The Propellant Handlers Ensemble (PHE) and Level “A” Ensemble Comparison (LAE): This study compared worker thermal stress while using the industry standard Level A hazardous material handling ensemble as opposed to using the similarly protective Propellant Handler’s Ensemble (PHE) that utilizes a cryogenic air supply pack, known as an Environmental Control Unit (ECU) as opposed to the compressed air Self Contained Breathing Apparatus (SCBA) used in the LAE. The research found that, in a 102°F environment, test subjects experienced significantly decreased body temperature increases, significantly decreased heart rate increases, and decreased sweat loss while performing a standard work routine while using the PHE, compared to the same test subjects performing the same routine while using the LAE. The Cryogenic Refuge Alternative Supply System (CryoRASS) project: The MINER Act of 2006 requires the operators of underground coal mines to provide refuge alternatives that can provide a safe atmosphere for workers for up to 96 hours in the event of a mine emergency. The CryoRASS project retrofitted an existing refuge chamber with a liquid air supply instead of the standard compressed air supply system and performed a 96 hour test. The CryoRASS system demonstrated that it provided a larger air supply in a significantly smaller footprint area, provided humidity and temperature control, and maintained acceptable oxygen and carbon dioxide levels in the chamber for the required amount of time. SCBA and Mine Rescue System (CryoBA/CryoASFS) Another requirement of the MINER Act is that additional emergency breathing equipment must be staged along evacuation routes to supplement the Self Contained/Self Rescue (SCSR) devices that are now required. The BRL has developed an SCBA known as the Cryogenic Breathing Apparatus (CryoBA), that has the ability to provide 2 hours of breathing air, a refill capability, and some cooling for the user. Cryogenic Air Storage and Filling Stations (CryoASFS) would be positioned in critical areas to extend evacuation time. The CryoASFS stations have a significantly smaller footprint and larger air storage capacity to similar compressed air systems. The CryoBA pack is currently undergoing NIOSH certification testing. Technical challenges associated with liquid breathing air systems: Research done by the BRL has also addressed three major technical challenges involved with the widespread use of liquid breathing air. The BRL developed a storage Dewar fitted with a Cryorefrigerator that has stored liquid air for four months with no appreciable oxygen enrichment due to differential evaporation. Testing of liquid breathing air was material and time intensive. A BRL contract developed a system that only required 1 liter of air and five minutes of time compared to the 10 liters of air and 75 minutes of time required by the old method. The BRL also developed a simple and cost effective method of manufacturing liquid air that joins a liquid oxygen tanker with a liquid nitrogen tanker through an orifice controlled “Y” fitting, mixing the two components, and depositing the mixed breathing air in a separate tanker.

Teachers’ reflections on non standard students work

One of the tasks of teaching (Ball, Thames, & Phelps, 2008) concerns the work of interpreting student error and evaluating alternative algorithms used by students. Teachers’ abilities to understand nonstandard student work affects their instructional decisions, the explanations they provide in the classroom, the way they guide their students, and how they conduct mathematical discussions. However, their knowledge or their perceptions of the knowledge may not correspond to the actual level of knowledge that will support flexibility and fluency in a mathematics classroom. In this paper, we focus on Norwegian and Portuguese teachers’ reflections when trying to give sense to students’ use of nonstandard subtraction algorithms and of the mathematics imbedded in such. By discussing teachers’ mathematical knowledge associated with these situations and revealed in their reflections, we can perceive the difficulties teachers have in making sense of students’ solutions that differ from those most commonly reached.

Standard voting power indices work : an experimental investigation of pure voting power

We evaluate power indices by experimentally measuring the political power embodied in blocks of votes per se. Subjects with differing votes divide a fixed purse by majority rule in online chat rooms under supermision. Chat rooms and processes for selecting subjects reduce or eliminate extraeous political forces leaving logrolling as the primary political force. Results show that various power indices bracket voting power which is more than proportionally concentrated in large players.

Standard tee rail construction for steam rail road and industrial railway track and switch work.

"Catalogue no. 21."

Standard practical plumbing; an exhaustive treatise on all branches of plumbing construction, including drainage and venting, ventilation, hot and cold water supply and circulation; showing the latest and best plumbing practice, special attention being given to the skilled work of the plumber, and to the theory underlying plumbing devices and operations,

Mode of access: Internet.

The American business and accounting encyclopaedia : a standard reference work for business men and accountants, profusely illustrated with many special forms, tables, and diagrams never before published /

Paged continuously.

Quality standard for work zone traffic control devices, 1998.

These standards, covering highway work zone traffic control devices, were developed for suppliers and contractors doing work for the Illinois Dept. of Transportation.