AEHRC & QUT at TREC 2011 Medical Track : a concept-based information retrieval approach

The Australian e-Health Research Centre and Queensland University of Technology recently participated in the TREC 2011 Medical Records Track. This paper reports on our methods, results and experience using a concept-based information retrieval approach. Our concept-based approach is intended to overcome specific challenges we identify in searching medical records. Queries and documents are transformed from their term-based originals into medical concepts as de ned by the SNOMED-CT ontology. Results show our concept-based approach performed above the median in all three performance metrics: bref (+12%), R-prec (+18%) and Prec@10 (+6%).

Utilising hospital data to inform product safety prioritisation : the application of RAPEX severity rankings in ICD-coded burn data

Background The implementation of the Australian Consumer Law in 2011 highlighted the need for better use of injury data to improve the effectiveness and responsiveness of product safety (PS) initiatives. In the PS system, resources are allocated to different priority issues using risk assessment tools. The rapid exchange of information (RAPEX) tool to prioritise hazards, developed by the European Commission, is currently being adopted in Australia. Injury data is required as a basic input to the RAPEX tool in the risk assessment process. One of the challenges in utilising injury data in the PS system is the complexity of translating detailed clinical coded data into broad categories such as those used in the RAPEX tool. Aims This study aims to translate hospital burns data into a simplified format by mapping the International Statistical Classification of Disease and Related Health Problems (Tenth Revision) Australian Modification (ICD-10-AM) burn codes into RAPEX severity rankings, using these rankings to identify priority areas in childhood product-related burns data. Methods ICD-10-AM burn codes were mapped into four levels of severity using the RAPEX guide table by assigning rankings from 1-4, in order of increasing severity. RAPEX rankings were determined by the thickness and surface area of the burn (BSA) with information extracted from the fourth character of T20-T30 codes for burn thickness, and the fourth and fifth characters of T31 codes for the BSA. Following the mapping process, secondary data analysis of 2008-2010 Queensland Hospital Admitted Patient Data Collection (QHAPDC) paediatric data was conducted to identify priority areas in product-related burns. Results The application of RAPEX rankings in QHAPDC burn data showed approximately 70% of paediatric burns in Queensland hospitals were categorised under RAPEX levels 1 and 2, 25% under RAPEX 3 and 4, with the remaining 5% unclassifiable. In the PS system, prioritisations are made to issues categorised under RAPEX levels 3 and 4. Analysis of external cause codes within these levels showed that flammable materials (for children aged 10-15yo) and hot substances (for children aged <2yo) were the most frequently identified products. Discussion and conclusions The mapping of ICD-10-AM burn codes into RAPEX rankings showed a favourable degree of compatibility between both classification systems, suggesting that ICD-10-AM coded burn data can be simplified to more effectively support PS initiatives. Additionally, the secondary data analysis showed that only 25% of all admitted burn cases in Queensland were severe enough to trigger a PS response.

Utilising hospital data to inform product safety prioritisation : the application of RAPEX severity rankings in ICD-coded Burn Data

Background The implementation of the Australian Consumer Law in 2011 highlighted the need for better use of injury data to improve the effectiveness and responsiveness of product safety (PS) initiatives. In the PS system, resources are allocated to different priority issues using risk assessment tools. The rapid exchange of information (RAPEX) tool to prioritise hazards, developed by the European Commission, is currently being adopted in Australia. Injury data is required as a basic input to the RAPEX tool in the risk assessment process. One of the challenges in utilising injury data in the PS system is the complexity of translating detailed clinical coded data into broad categories such as those used in the RAPEX tool. Aims This study aims to translate hospital burns data into a simplified format by mapping the International Statistical Classification of Disease and Related Health Problems (Tenth Revision) Australian Modification (ICD-10-AM) burn codes into RAPEX severity rankings, using these rankings to identify priority areas in childhood product-related burns data. Methods ICD-10-AM burn codes were mapped into four levels of severity using the RAPEX guide table by assigning rankings from 1-4, in order of increasing severity. RAPEX rankings were determined by the thickness and surface area of the burn (BSA) with information extracted from the fourth character of T20-T30 codes for burn thickness, and the fourth and fifth characters of T31 codes for the BSA. Following the mapping process, secondary data analysis of 2008-2010 Queensland Hospital Admitted Patient Data Collection (QHAPDC) paediatric data was conducted to identify priority areas in product-related burns. Results The application of RAPEX rankings in QHAPDC burn data showed approximately 70% of paediatric burns in Queensland hospitals were categorised under RAPEX levels 1 and 2, 25% under RAPEX 3 and 4, with the remaining 5% unclassifiable. In the PS system, prioritisations are made to issues categorised under RAPEX levels 3 and 4. Analysis of external cause codes within these levels showed that flammable materials (for children aged 10-15yo) and hot substances (for children aged <2yo) were the most frequently identified products. Discussion and conclusions The mapping of ICD-10-AM burn codes into RAPEX rankings showed a favourable degree of compatibility between both classification systems, suggesting that ICD-10-AM coded burn data can be simplified to more effectively support PS initiatives. Additionally, the secondary data analysis showed that only 25% of all admitted burn cases in Queensland were severe enough to trigger a PS response.

University of Glasgow (qirdcsuog) at TREC Crowdsourcing 2011 : TurkRank-network-based worker ranking in crowdsourcing

For TREC Crowdsourcing 2011 (Stage 2) we propose a networkbased approach for assigning an indicative measure of worker trustworthiness in crowdsourced labelling tasks. Workers, the gold standard and worker/gold standard agreements are modelled as a network. For the purpose of worker trustworthiness assignment, a variant of the PageRank algorithm, named TurkRank, is used to adaptively combine evidence that suggests worker trustworthiness, i.e., agreement with other trustworthy co-workers and agreement with the gold standard. A single parameter controls the importance of co-worker agreement versus gold standard agreement. The TurkRank score calculated for each worker is incorporated with a worker-weighted mean label aggregation.

Combinação de drogas para o tratamento da Hipertensão Arterial: estratégia para um melhor controle pressórico

A taxa de controle da hipertensão arterial permanece subótima apesar dos amplos e intensos programas institucionais e o número das novas medicações. A combinação de drogas de diferentes mecanismos de ação vem se tornando uma alternativa para aumentar a redução na pressão arterial (PA) e aumentar seu controle, aumentar aderência ao tratamento e reduzir os eventos adversos. Um estudo fatorial 4X4 foi desenhado para determinar a eficácia e a segurança de telmisartana (T) mais anlodipino (A) em pacientes hipertensos estágios I e II. Pacientes hipertensos adultos (N=1461) estágios I e II (pressão arterial basal 153,212,1 ⁄101,74,3 mm Hg) foram randomizados para 1 de 16 grupos de tratamento com T 0, 20, 40, 80 mg e A 0, 2.5, 5, 10 mg por oito semanas. A maior redução na média das pressões sistólica e diastólica foram observadas com T 80 mg mais A10 mg (- 26,4 ⁄20,1 mm Hg; p<0,05 comparados com as monoterapias). A taxa de controle da PA foi também maior no grupo T 80mg mais A 10mg (76,5% [controle total] e 85,3% [controle da PA diastólica ]), e taxa de controle da PA >90% com esta combinação. O edema periférico maleolar foi o evento adverso mais frequente e ocorreu no grupo A 10mg (17,8%), porém, esta taxa foi marcadamente menor quando A foi usada associada com T: 11,4% (T20+A10), 6,2% (T40+ A10), e 11,3% (T80+A10). Um subestudo utilizando a monitorização ambulatorial da pressão arterial (MAPA) foi realizado na fase basal e após oito semanas de tratamento. A maior redução média das pressões nas 24 horas a partir do período basal foi registrada para a combinação de telmisartana 80 mg e anlodipino 10 mg e encontrou-se queda de 22,4/14,6 mmHg, de 11,9/6,9 mmHg para anlodipino 10 mg monoterapia e de 11,0/6,9 mmHg para telmisartana 80 mg (p< 0,001). Além disso, resultados relevantes foram também constatados numa análise post hoc de subgrupos incluindo idosos, obesos, diabéticos tipo 2 e hipertensão sistólica. A resposta anti-hipertensiva da combinação foi semelhante, independente de qualquer característica de cada subgrupo. Estes dados demonstram que telmisartana e anlodipino em combinação oferecem substancial redução e controle nas 24 horas superior às respectivas monoterapias em hipertensos estágios I e II.

Estudo da influência da temperatura na desativação de catalisadores automotivos comerciais

Foi estudada a influência da temperatura na desativação de catalisadores automotivos comerciais, à base de Pt/Rh e de Pd/Rh, de diferentes fabricantes. Foram empregadas técnicas de caracterização textural e físico-química como FRX, AAS, fisissorção de N2, TG-ATD, DRX, RTP, quimissorção de H2 e MEV-EDX. Os catalisadores foram avaliados nas reações de oxidação do CO e oxidação do propano, utilizando uma mistura de gases estequiométrica semelhante ao gás de exaustão. Os catalisadores denominados G e V, de Pt/Rh e Pd/Rh, respectivamente, foram envelhecidos a 900C, em condições estequiométricas, e a 1200C, em ar, por períodos de tempo determinados. Em relação ao envelhecimento a 900C, apesar da caracterização apontar melhores resultados para o catalisador G, a comparação com os catalisadores novos indicou que a extensão da desativação sofrida pelo catalisador V foi menor do que aquela sofrida pelo catalisador G. O envelhecimento oxidante a 1200C foi muito prejudicial ao desempenho de ambos os catalisadores. Os difratogramas dos catalisadores envelhecidos nestas condições mostraram fenômenos importantes de transição de fase da alumina, bem como indícios de formação de novas fases a partir do óxido misto de Ce/Zr. Os perfis de RTP mostraram uma grande queda na redutibilidade, tanto para o catalisador G como para o V após este envelhecimento, e as micrografias de MEV-EDX mostraram estruturas muito sinterizadas e vários pontos de Pd aglomerado no catalisador V. Esse catalisador também apresentou partículas de texturas incomuns. Além disso, para ambos foi verificado indícios de perda de material nas amostras calcinadas por 72h a 1200C. Com relação aos resultados de avaliação catalítica, o catalisador G apresentou um desempenho inferior ao do catalisador V. A realização de envelhecimentos em atmosfera oxidante pode justificar esse comportamento uma vez que esse procedimento promove a formação de óxidos de platina, menos ativos que a platina metálica para essas reações. Além disso, este catalisador apresentou um teor de Pt bem abaixo daqueles registrados na literatura para catalisadores automotivos comerciais. Por outro lado, para catalisadores de Pd, o envelhecimento oxidante leva à formação de PdO, mais ativo que o Pd metálico. Outra observação significativa em relação à avaliação catalítica foi o fato de o catalisador G novo ter apresentado uma atividade muito baixa, especialmente para o propano, que tendeu a aumentar com o envelhecimento térmico. Foi sugerido que este catalisador precisaria de uma ativação térmica, a qual o catalisador V parece ter sido submetido durante a fabricação, pois há indícios da ocorrência de certo desgaste térmico neste catalisador novo, como mostrados pelos resultados de fisissorção de N2, DRX, TG-ATD, RTP e MEV-EDX. Foi também mostrado que os resultados de quimisorção de H2, apesar de não poderem ser usados na determinação da dispersão metálica, apresentaram uma tendência de correlação entre o consumo de H2 e o desempenho catalítico expresso como T50 ou T20. Observa-se um aumento na atividade catalítica quando a quantidade de H2 dessorvido (DTP-H2) aumenta. Concluindo, o envelhecimento térmico mostrou ser prejudicial ao desempenho do catalisador comercial, principalmente para situações drásticas como o envelhecimento realizado a 1200C em condições oxidantes

Recombinant protein of heptad-repeat HR212, a stable fusion inhibitor with potent anti-HIV action in vitro

HR212, a recombinant protein expressed in Escherichia coli, has been previously reported to inhibit HIV-1 membrane fusion at low nanomolar level. Here we report that HR212 is effective in blocking laboratory strain HIV-1IIIB entry and replication with EC50 values of 3.92±0.62 and 6.59±1.74 nM, respectively, and inhibiting infection by clinic isolate HIV-1KM018 with EC50 values of 44.44±10.20 nM, as well as suppressing HIV-1- induced cytopathic effect with an EC50 value of 3.04±1.20 nM. It also inhibited HIV-2ROD and HIV-2CBL-20 entry and replication in the μM range. Notably, HR212 was highly effective against T20-resistant strains with EC50 values ranging from 5.09 to 7.75 nM. Unlike T20, HR212 showed stability sufficient to inhibit syncytia formation in a time-of-addition assay, and was insensitive to proteinase K digestion. These results suggest that HR212 has great potential to be further developed as novel HIV-1 fusion inhibitor for treatment of HIV/ AIDS patients, particularly for those infected by T20-resistant variants.

Places making: participatory construction of scientifi c culture cities

In the framework of the European project Platform of Local Authorities and Communicators Engaged in Science (PLACES), we analyse the articulations between scientifi c communication, public perception of science, processes of citizen participation and apropiation of space, based on a case study of the inhabitants of Teruel city, Autonomous Community of Aragon, Spain. On the interrelationships between these issues, there are a number of contradictions, such as the difference between a high interest for information about science and technology and a low level of recognition and interaction with local institutions involved in those activities, the complex conceptualization of scientifi c space in relation to the “public-private” pair, or an articulation of a claiming civic rethoric and an insuffi cient co-responsibility. We conclude that, in a local context, the dimension of territoriality and, in particular, the identifi cation with the town, is a central mediation for activating citizen participation as part of processes of appropriation of space for setting up cities of scientifi c culture.

Recueil de lois, ordonnances, décrets, réglements et circulaires concernant les différents services du Ministère des travaux publics : ancien Recueil Potiquet / dressé par les soins de l'Administration centrale

1911 (SER2,T20).

Répertoire périodique de l'enregistrement : recueil de toutes les décisions administratives et judiciaires sur l'enregistrement et le timbre, comparées avec le droit civil...

1873 (T20).

La Révolution française : revue historique...

1891/01 (T20)-1891/06.

Revue critique d'histoire et de littérature / publiée sous la direction de MM. P. Meyer, Ch. Morel, G. Paris, H. Zotenberg

1885/07 (A19,NOUV SER,T20)-1885/12.