Physical properties of edible films based on cassava starch as affected by the plasticizer concentration

The aim of this work was to investigate the effect of glycerol contents on physical properties of cassava starch films. The films were prepared from film-forming solutions (FFS) with 2g cassava starch/100g water and 0, 15, 30 and 45g glycerol/100g starch, and were analysed to determine its mechanical properties by tensile tests, the glass-transition temperature (T-g) by differential scanning calorimetry (DSC) and the crystallinity by X-ray diffraction (XRD). The infrared spectra of the films were also recorded. The resistance values of the films decreased, while those of the elasticity increased with an increase in glycerol concentration due to the plasticizer effect of glycerol, which was also observed in DSC curves. The T-g of the films prepared decreased with the glycerol content. However, for samples with 30 and 45g glycerol/100g starch, two T-g curves were observed, probably due to a phase separation phenomenon. According to the XRD diffractograms, the films with 0 and 15gglycerol/100g starch presented an amorphous character, but some tendency to show crystalline peaks were observed for films with 30 and 45g glycerol/100g starch. The results obtained with Fourier transform infrared (FTIR) corroborated these observations. Copyright (C) 2007 John Wiley & Sons, Ltd.

Reduction of oil uptake in deep fat fried chicken nuggets using edible coatings based on cassava starch and methylcellulose

The aim of this study was to evaluate the effect of edible coatings based on methylcellulose (MC) and cassava starch (CS) to reduce oil uptake and improve water retention of chicken nuggets during deep fat frying. Edible coatings were prepared with I g of MC/100 g solution and 4 g of CS/100 g solution, with 25 or 55 g glycerol/100 g biopolymer. These solutions were applied to nugget samples before battering. Pre-fried and fried nuggets were analyzed to determine lipid and water contents. Color and texture were also measured in the fried nuggets. In general, there was no effect of the two concentrations of plasticizer of either of the biopolymers on the water retention of whole nuggets. But, higher oil uptake reduction, and consequently, lower lipid content was observed on nuggets coated with CS and 25% plasticizer. The coated samples were darker and had a brighter yellow color when compared with the control. There was also a significant decrease in the shearing force of the fried coated samples, indicating reduced hardness of these samples.

Changes in soluble carbohydrates and starch amounts during somatic and zygotic embryogenesis of Acca sellowiana (Myrtaceae)

Comparative analysis of zygotic and somatic embryogenesis of Acca sellowiana showed higher amounts of sucrose, fructose, raffinose, and myo-inositol in zygotic embryos at different developmental stages than in corresponding somatic ones. These differences were mostly constant. In general, glucose levels were significantly lower than the other soluble carbohydrates analyzed, showing minor variation in each embryo stage. Despite the presence of sucrose in the culture medium, its levels conspicuously diminished in somatic embryos compared with the zygotic ones. Raffinose enhanced parallel to embryo development, regardless of its zygotic or somatic origin. Analysis of the soluble carbohydrate composition of mature zygotic cotyledon used as explant pointed out fructose, glucose, myo-inositol, sucrose, and raffinose as the most important. Similar composition was also found in the corresponding somatic cotyledon. Total soluble carbohydrates varied inversely, decreasing in zygotic embryos and increasing in somatic embryos until the 24th d, at which time they increased rapidly about sixfold in zygotic embryos until the 27th d, a period coinciding with the zygotic proembryos formation. Such condition seems to reflect directly the variation of endogenous sucrose level, mainly because glucose and fructose diminished continuously during this time period. This means that, in terms of soluble sugars, zygotic embryo formation occurred under a situation represented by high sucrose amounts, simultaneously with low fructose and glucose levels, while in contrast, somatic embryo formation took place under an endogenous sugar status characterized by a substantial fructose enhancement. Starch levels increased continuously in zygotic embryos and decreased in somatic ones, the reverse to what was found in fructose variation. Starch accumulation was significantly higher in somatic torpedo and cotyledonary embryos than in the corresponding zygotic ones.

Preparation and characterization of cross-linked starch polyurethanes

This study describes the preparation and characterization of new starch cross-linked polyurethanes produced by the reaction of native cornstarch with a propylene oxide toluene diisocyanate oligomer. Infrared analysis confirmed the occurrence of the reaction and solubility and swelling tests showed that it had led to cross-linked structures. These products were totally amorphous and displayed elastomeric properties associated with two T(g)s at -60 and 35 degrees C. (C) 2009 Elsevier Ltd. All rights reserved.

Amylopectin-rich starch plasticized with glycerol for polymer electrolyte application

This paper describes the preparation and characterization of a solid polymer electrolyte based on amylopectin-rich starch plasticized with glycerol. The samples were characterized through ionic conductivity (sigma) measurements, scanning electron microscopy, thermal analysis, and spectroscopy in the UV-Vis-NIR region. The results showed that the highest sigma (1.1 x 10(-4) Scm(-1) at 30 degrees C) was obtained for the sample with n = [O]/[Li] = 6.5 ratio. In addition, the samples plasticized with 30-35 wt.% of glycerol presented high ionic conductivity, transparency and conduction stability. The ionic conductivity measurements as a function of lithium salt contents showed a maximum for n=6.5. The ionic conductivity as a function of time for amylopectin-rich starch plasticized with 30 wt.% of glycerol and containing [O]/[Li] = 10 showed conduction stability over 6 months (sigma similar to 3.01 x 10(-5) S cm(-1)). (C) 2010 Elsevier B.V. All rights reserved.

Cassava bagasse cellulose nanofibrils reinforced thermoplastic cassava starch

Cellulose cassava bagasse nanofibrils (CBN) were directly extracted from a by-product of the cassava starch (CS) industry, viz. the cassava bagasse (CB), The morphological structure of the ensuing nanoparticles was investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), presence of other components such as sugars by high performance liquid chromatography (HPLC), thermogravimetric analysis (TGA), and X-ray diffraction (XRD) experiments. The resulting nanofibrils display a relatively low crystallinity and were found to be around 2-11 nm thick and 360-1700 nm long. These nanofibrils were used as reinforcing nanoparticles in a thermoplastic cassava starch matrix plasticized using either glycerol or a mixture of glycerol/sorbitol (1:1) as plasticizer. Nanocomposite films were prepared by a melting process. The reinforcing effect of the filler evaluated by dynamical mechanical tests (DMA) and tensile tests was found to depend on the nature of the plasticizer employed. Thus, for the glycerol-plasticized matrix-based composites, it was limited especially due to additional plasticization by sugars originating from starch hydrolysis during the acid extraction. This effect was evidenced by the reduction of glass vitreous temperature of starch after the incorporation of nanofibrils in TPSG and by the increase of elongation at break in tensile test. On the other hand, for glycerol/sorbitol plasticized nanocomposites the transcrystallization of amylopectin in nanofibrils surface hindered good performances of CBN as reinforcing agent for thermoplastic cassava starch. The incorporation of cassava bagasse cellulose nanofibrils in the thermoplastic starch matrices has resulted in a decrease of its hydrophilic character especially for glycerol plasticized sample. (C) 2009 Elsevier Ltd. All rights reserved.

Effects of starch gelatinization and oxidation on the rheological behavior of chitosan/starch blends

Chitosan/starchblends represent an interesting alternative for the preparation of biocompatible drug delivery systems, packing materials and edible films. This paper reports on the effects of starch gelatinization and oxidation on the rheological behavior of chitosan/starch blends. The results show that the modifications in the starch structure cause changes in G` (storage modulus) and G `` (lossmodulus) as a function of frequency. For chitosan/starch, G `` is higher than G`, showing a viscous behavior. However, for chitosan/gelatinized starch and chitosan/oxidized starch, an increase in the angular frequency promotes a modulus crossover at omega = 0.02 and 0.04 rad s(-1), respectively. The viscosity curves as a function of shear rate show that both modifications cause an increase in viscosity, and all blends show a non-Newtonian behavior. (C) 2011 Society of Chemical Industry

Resistant starch in the Australian diet

We set out to estimate resistant starch (RS) intakes using the 24-hour food intake data from the 1995 National Nutrition Survey (NNS) database of 13 858 Australians. As there are often significant differences in the RS content of foods reported by various authors. we calculated intakes based on both published maximum and minimum value, for individual food,. RS intakes (mean and SEM) for all persons were in the range 3.4 ± 0.03 g/d (minimum estimate) to 9.4 ± 0.07 g/d (maximum estimate). Adult males (19+ years) consumed more RS (10.7 ± 0.11 g/day maximum estimale) than adult females (19+ years) (8.2 g ± 0.08 g/day maximum estimate). RS comprised a greater proportion of the total starch intake in the very young and in the older age groups. Across the population. foods contributing most to RS intake were potatoes, bananas and white bread.

Increased probiotic yogurt or resistant starch intake does not affect isoflavone bioavailability in subjects consuming a high soy diet

Objective - Probiotics and prebiotics that affect gut microflora balance and its associated enzyme activity may contribute to interindividual variation in isoflavone absorption after soy intake, possibly enhancing isoflavone bioavailability. This study examined the effects of the consumption of bioactive yogurt (a probiotic) or resistant starch (a known prebiotic) in combination with high soy intake on soy isoflavone bioavailability.

Methods - Using a crossover design, chronic soy consumption was compared with soy plus probiotic yogurt or resistant starch in older male and postmenopausal females (n = 31). Isoflavone bioavailability was assessed at the beginning and end of each 5-wk dietary period by sampling plasma and urine after a standardized soy meal.

Results - Chronic soy intake did not significantly affect plasma or urinary isoflavones after the soy meal and there were no significant effects of probiotic or resistant starch treatment. However, there were trends for increased circulating plasma daidzein and genistein after the probiotic treatment and for increased plasma daidzein and genistein 24 h after soy intake with resistant starch treatment. Neither treatment induced or increased equol production, although there was a trend for increased plasma equol in “equol-positive” subjects (n = 12) after probiotic treatment.

Conclusion - The weak or absence of effects of probiotic yogurt or resistant starch supplement to a chronic soy diet suggests that gut microflora were not modified in a manner that significantly affected isoflavone bioavailability or metabolism.

Dietary resistant starch interacts with non-starch polysaccharide and protein to influence colonic protein fermentation, with possible implications for colon cancer risk in humans

Resistant starch is dietary starch that passes undigested into the colon where it can have effects similar to non-starch polysaccharide (dietary fibre). The results support the potential health benefits of incorporating foods containing high levels of both resistant starch and non-starch polysaccharide, such as whole grain breads and legumes, as part of well balanced diets containing fruit, vegetables, cereals, meat/alternatives and dairy foods.

A case study on waste minimisation and wastewater treatment in starch and noodle factories

A medium scale Mung Bean starch factory was taken in this study to assess the pollution caused by various streams in starch and noodle factories, and to provide the basic information for wastewater management in them. This study shows that the wastewater from starch processing unit with 46~54 tons of production capacity is the main polluting source, contained high values of COD and SS. Also the specific water consumption to process one ton Mung Bean in 16~25m3 is higher that theoretically required one. Methods have been proposed for minimizing and treating the wastewater produced by the factory to overcome the pollution problems. One of the alternatives is to use water in a controlled way by making optimum flow rates on the tab valves, in which water consumption can be brought down. However, bio-treatability of wastewater can be used for treating the total wastewater due to the suitability in characteristics.

Immunologic significance of respirable atmospheric starch granules containing major birch allergen Bet v 1

Background: Birch-pollen allergens are an important cause of early spring hay fever and allergic asthma. Recently, we reported a mechanism for the release of respirable allergenic particles from birch pollen containing the major allergen Bet v 1. In this study, we aimed to assess the immunologic significance of the released Bet v 1-containing starch granules in the environment.

Methods: A two-site monoclonal antibody-based assay (ELISA) was employed to quantitate Bet v 1 in high-volume air sampler filter extracts, and immunogold-labelling was used on sections of these extracts to localize Bet v 1. Immunoblot analyses were performed with pooled sera from patients sensitive to birch pollen.

Results: Atmospheric starch granules contained Bet v 1, and the concentration increased upon light rainfall. Sera from patients allergic to birch allergens recognized extracts from isolated starch granules.

Conclusions: The clinical implications of these findings are that starch granules released from birch pollen are potentially able to trigger allergic asthmatic reactions to Bet v 1, since the allergen occurs in respirable particles. Thus, clinicians can advise asthma patients to remain indoors on days of light rainfall during the birch-pollen season to avoid high levels of allergen exposure.