The diversity of postharvest losses in cassava value chains in selected developing countries

The extent of physical and economic postharvest losses at different stages of cassava value chains has been estimated in four countries that differ considerably in the way cassava is cultivated, processed and consumed and in the relationships and linkages among the value chain actors. Ghana incurs by far the highest losses because a high proportion of roots reach the consumers in the fresh form. Most losses occur at the last stage of the value chain. In Nigeria and Vietnam processors incur most of the losses while in Thailand most losses occur during harvesting. Poorer countries incur higher losses despite their capacity to absorb sub-standard products (therefore transforming part of the physical losses into economic losses) and less strict buyer standards. In monetary terms the impact of losses is particularly severe in Ghana and estimated at about half a billion US dollar per annum while in the other countries it is at the most about USD 50 million. This comparison shows that there are no “one-size-fits-all" solutions for addressing postharvest losses but rather these must be tailor-made to the specific characteristics of the different value chains.

Evaluation of packaging films to extend storage life of indigenous Australian vegetables and herbs

A study undertaken in Hervey Bay, Queensland, investigated the potential of creating an indigenous agribusiness opportunity based on the cultivation of indigenous Australian vegetables and herbs. Included were warrigal greens (WG) (Tetragonia tetragonioides), a green leafy vegetable and the herb sea celery (SC) (Apium prostratum); both traditional foods of the indigenous population and highly desirable to chefs wishing to add a unique, indigenous flavour to modern dishes. Packaging is important for shelf life extension and minimisation of postharvest losses in horticultural products. The ability of two packaging films to extend WG and SC shelf life was investigated. These were Antimisted Biaxial Oriented Polypropylene packaging film (BOPP) without perforations and Antifog BOPP Film with microperforations. Weight loss, packaging headspace composition, colour changes, sensory differences and microbial loads of packed WG and SC leaves were monitored to determine the impact of film oxygen transmission rate (OTR) and film water vapour transmission (WVT) on stored product quality. WG and SC were harvested, sanitised, packed and stored at 4°C for 16 days. Results indicated that the OTR and WVT rates of the package film significantly (PKLEINERDAN0.05) influenced the package headspace and weight loss, but did not affect product colour, total bacteria, yeast and mould populations during storage. There was no significant difference (PGROTERDAN0.05) in aroma, appearance, texture and flavour for WG and SC during storage. It was therefore concluded that a shelf life of 16 days at 4°C, where acceptable sensory properties were retained, was achievable for WG and SC in both packaging films.

Metodologia para quantificacao e caracterizacao das perdas pos-colheita de cenoura.

1999

Desenvolvimento de embalagem plastica para transporte e comercializacao de tomate.

Atualmente, no Brasil, a embalagem mais usada para tomate continua sendo a caixa de madeira que era usada para transportar querosene na Segunda Guerra Mundial, há meio século, conhecida por caixa ´K´. Os aspectos desejáveis da caixa 'K' incluem o fato de ser retornável e resistente. Os aspectos indesejáveis incluem o fato de possuir superfície áspera; alojar patógenos, funcionando como fonte de inóculo; aberturas laterais cortantes; profundidade excessiva, que comporta grande número de camadas de produtos; ser tampada. Essas características favorecem às injúrias mecânicas e comprometem a durabilidade e qualidade das hortaliças. Sabendo-se que as necessidades de proteção dos produtos vegetais são diferentes, torna-se necessário que as embalagens para protegê-los sejam específicas. Assim, o objetivo deste trabalho é desenvolver uma embalagem apropriada para tomate. O protótipo foi testado em relação à caixa 'K' e caixa de plástico já existente no mercado. Logo após a colheita os mesmos tratamentos foram deixados no sol ou na sombra, durante duas horas, para observar se influenciariam os frutos. As características avaliadas foram: variação de matéria fresca, aferida através de balança; vida útil, pelo período em que o vegetal esteve em perfeitas condições de ser comercializado; cor, pela escala com quatro classes para pimentão; variação da firmeza, medida por "push-pull"; teor relativo de água; deterioração, pelo número e peso de frutos deteriorados. Devido à grande influência dos danos mecânicos sobre as perdas pós-colheita, provavelmente este seja o fator mais importante na avaliação do protótipo. Houve diferença estatística entre os tratamentos, sendo que o protótipo apresentou as menores porcentagens de danos mecânicos, o que é desejável. Também houve diferença estatística para deterioração. Nas demais características, o protótipo não diferiu estatisticamente dos outros tratamentos.

Metodologia para quantificacao e caracterizacao das perdas pos-colheita de pimentao no varejo.

1999

Metodologia para quantificaçao e caracterizacao das perdas pos-colheita de tomate no varejo.

Neste trabalho é apresentada uma metodologia objetiva e quantitativa de avaliação de perdas pós-colheita de tomate no mercado varejista. O tamanho da amostra foi determinado com base no plano que envolve a alocação de que produz variâncias mínimas para custos constantes por estratos. A amostragem foi realizada para o produto antes de ser exposto na área de vendas, denominada qualidade inicial e para o descarte. Em ambas as amostras foram determinadas a proporção de frutos verdes, maduros, muito maduros, com coloração anormal, com danos mecânicos, com danos fisiológicos, com doenças, com pragas e sem dano.

Optimization of Processing Technology for Commercial Drying of Bananas (Matooke)

Summary - Cooking banana is one of the most important crops in Uganda; it is a staple food and source of household income in rural areas. The most common cooking banana is locally called matooke, a Musa sp triploid acuminate genome group (AAA-EAHB). It is perishable and traded in fresh form leading to very high postharvest losses (22-45%). This is attributed to: non-uniform level of harvest maturity, poor handling, bulk transportation and lack of value addition/processing technologies, which are currently the main challenges for trade and export, and diversified utilization of matooke. Drying is one of the oldest technologies employed in processing of agricultural produce. A lot of research has been carried out on drying of fruits and vegetables, but little information is available on matooke. Drying of matooke and milling it to flour extends its shelf-life is an important means to overcome the above challenges. Raw matooke flour is a generic flour developed to improve shelf stability of the fruit and to find alternative uses. It is rich in starch (80 - 85%db) and subsequently has a high potential as a calorie resource base. It possesses good properties for both food and non-food industrial use. Some effort has been done to commercialize the processing of matooke but there is still limited information on its processing into flour. It was imperative to carry out an in-depth study to bridge the following gaps: lack of accurate information on the maturity window within which matooke for processing into flour can be harvested leading to non-uniform quality of matooke flour; there is no information on moisture sorption isotherm for matooke from which the minimum equilibrium moisture content in relation to temperature and relative humidity is obtainable, below which the dry matooke would be microbiologically shelf-stable; and lack of information on drying behavior of matooke and standardized processing parameters for matooke in relation to physicochemical properties of the flour. The main objective of the study was to establish the optimum harvest maturity window and optimize the processing parameters for obtaining standardized microbiologically shelf-stable matooke flour with good starch quality attributes. This research was designed to: i) establish the optimum maturity harvest window within which matooke can be harvested to produce a consistent quality of matooke flour, ii) establish the sorption isotherms for matooke, iii) establish the effect of process parameters on drying characteristics of matooke, iv) optimize the drying process parameters for matooke, v) validate the models of maturity and optimum process parameters and vi) standardize process parameters for commercial processing of matooke. Samples were obtained from a banana plantation at Presidential Initiative on Banana Industrial Development (PIBID), Technology Business Incubation Center (TBI) at Nyaruzunga – Bushenyi in Western Uganda. A completely randomized design (CRD) was employed in selecting the banana stools from which samples for the experiments were picked. The cultivar Mbwazirume which is soft cooking and commonly grown in Bushenyi was selected for the study. The static gravitation method recommended by COST 90 Project (Wolf et al., 1985), was used for determination of moisture sorption isotherms. A research dryer developed for this research. All experiments were carried out in laboratories at TBI. The physiological maturity of matooke cv. mbwazirume at Bushenyi is 21 weeks. The optimum harvest maturity window for commercial processing of matooke flour (Raw Tooke Flour - RTF) at Bushenyi is between 15-21 weeks. The finger weight model is recommended for farmers to estimate harvest maturity for matooke and the combined model of finger weight and pulp peel ratio is recommended for commercial processors. Matooke isotherms exhibited type II curve behavior which is characteristic of foodstuffs. The GAB model best described all the adsorption and desorption moisture isotherms. For commercial processing of matooke, in order to obtain a microbiologically shelf-stable dry product. It is recommended to dry it to moisture content below or equal to 10% (wb). The hysteresis phenomenon was exhibited by the moisture sorption isotherms for matooke. The isoteric heat of sorption for both adsorptions and desorption isotherms increased with decreased moisture content. The total isosteric heat of sorption for matooke: adsorption isotherm ranged from 4,586 – 2,386 kJ/kg and desorption isotherm from 18,194– 2,391 kJ/kg for equilibrium moisture content from 0.3 – 0.01 (db) respectively. The minimum energy required for drying matooke from 80 – 10% (wb) is 8,124 kJ/kg of water removed. Implying that the minimum energy required for drying of 1 kg of fresh matooke from 80 - 10% (wb) is 5,793 kJ. The drying of matooke takes place in three steps: the warm-up and the two falling rate periods. The drying rate constant for all processing parameters ranged from 5,793 kJ and effective diffusivity ranged from 1.5E-10 - 8.27E-10 m2/s. The activation energy (Ea) for matooke was 16.3kJ/mol (1,605 kJ/kg). Comparing the activation energy (Ea) with the net isosteric heat of sorption for desorption isotherm (qst) (1,297.62) at 0.1 (kg water/kg dry matter), indicated that Ea was higher than qst suggesting that moisture molecules travel in liquid form in matooke slices. The total color difference (ΔE*) between the fresh and dry samples, was lowest for effect of thickness of 7 mm, followed by air velocity of 6 m/s, and then drying air temperature at 70˚C. The drying system controlled by set surface product temperature, reduced the drying time by 50% compared to that of a drying system controlled by set air drying temperature. The processing parameters did not have a significant effect on physicochemical and quality attributes, suggesting that any drying air temperature can be used in the initial stages of drying as long as the product temperature does not exceed gelatinization temperature of matooke (72˚C). The optimum processing parameters for single-layer drying of matooke are: thickness = 3 mm, air temperatures 70˚C, dew point temperature 18˚C and air velocity 6 m/s overflow mode. From practical point of view it is recommended that for commercial processing of matooke, to employ multi-layer drying of loading capacity equal or less than 7 kg/m², thickness 3 mm, air temperatures 70˚C, dew point temperature 18˚C and air velocity 6 m/s overflow mode.

A decade of plant proteomics and mass spectrometry: translation of technical advancements to food security and safety issues

Tremendous progress in plant proteomics driven by mass spectrometry (MS) techniques has been made since 2000 when few proteomics reports were published and plant proteomics was in its infancy. These achievements include the refinement of existing techniques and the search for new techniques to address food security, safety, and health issues. It is projected that in 2050, the world’s population will reach 9–12 billion people demanding a food production increase of 34–70% (FAO, 2009) from today’s food production. Provision of food in a sustainable and environmentally committed manner for such a demand without threatening natural resources, requires that agricultural production increases significantly and that postharvest handling and food manufacturing systems become more efficient requiring lower energy expenditure, a decrease in postharvest losses, less waste generation and food with longer shelf life. There is also a need to look for alternative protein sources to animal based (i.e., plant based) to be able to fulfill the increase in protein demands by 2050. Thus, plant biology has a critical role to play as a science capable of addressing such challenges. In this review, we discuss proteomics especially MS, as a platform, being utilized in plant biology research for the past 10 years having the potential to expedite the process of understanding plant biology for human benefits. The increasing application of proteomics technologies in food security, analysis, and safety is emphasized in this review. But, we are aware that no unique approach/technology is capable to address the global food issues. Proteomics-generated information/resources must be integrated and correlated with other omics-based approaches, information, and conventional programs to ensure sufficient food and resources for human development now and in the future.

Revestimentos de fécula de mandioca, perda de massa e alteração da cor de frutos de pimentão

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Soluções de manutenção na pós-colheita de Chrysanthemum morifolium cv. Dragon

O desenvolvimento e uso de técnicas que prolonguem a durabilidade das flores, mantendo a qualidade do produto, é imprescindível para redução de perdas pós-colheita. Objetivou-se, neste trabalho, avaliar soluções de manutenção, associadas ou não a sacarose, na manutenção da qualidade pós-colheita de hastes de crisântemos. O experimento foi conduzido sob delineamento inteiramente casualizado, em esquema fatorial, com cinco tratamentos e três repetições, com 2 hastes florais cada uma. Os tratamentos utilizaram água destilada; 8-HQC a 100 mg L-1; 8-HQC a 100 mg L-1 + sacarose a 50 g L-1, 8-HQC a 200 mg L-1; 8-HQC a 200 mg L-1 + sacarose a 50 g L-1. Foram feitas avaliações físicas: coloração, massa fresca e conteúdo relativo de água (CRA); avaliações químicas: açúcares redutores e pigmentos; e avaliações qualitativas: turgescência, cor das flores, e número de botões, flores entreabertas e abertas. A combinação de 8-HQC 200 mg L-1 + sacarose a 50 g L-1 foi a que apresentou melhor desempenho para a manutenção da qualidade das hastes florais, favorecendo a abertura de botões e a turgescência das lígulas. A sacarose contribuiu para uma melhor manutenção de substâncias de reserva na haste, que tiveram a sua vida de vaso estendida.

Isolamento, purificação e caracterização da peroxidase de yacon (Smallanthus sonchifolius)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Proteomic analysis of papaya fruit ripening using 2DE-DIGE

Papayas have a very short green life as a result of their rapid pulp softening as well as their susceptibility to physical injury and mold growth. The ripening-related changes take place very quickly, and there is a continued interest in the reduction of postharvest losses. Proteins have a central role in biological processes, and differential proteomics enables the discrimination of proteins affected during papaya ripening. A comparative analysis of the proteomes of climacteric and pre-climacteric papayas was performed using 2DE-DIGE. Third seven proteins corresponding to spots with significant differences in abundance during ripening were submitted to MS analysis, and 27 proteins were identified and classified into six main categories related to the metabolic changes occurring during ripening. Proteins from the cell wall (alpha-galactosidase and invertase), ethylene biosynthesis (methionine synthase), climacteric respiratory burst, stress response, synthesis of carotenoid precursors (hydroxymethylbutenyl 4-diphosphate synthase, GcpE), and chromoplast differentiation (fibrillin) were identified. There was some correspondence between the identified proteins and the data from previous transcript profiling of papaya fruit, but new, accumulated proteins were identified, which reinforces the importance of differential proteomics as a tool to investigate ripening and provides potentially useful information for maintaining fruit quality and minimizing postharvest losses. (C) 2011 Elsevier B.V. All rights reserved.

Poscosecha de ciruela variedad angeleno : conservación frigorífica tradicional y en atmósfera modificada

Objetivos: reducir pérdidas durante la conservación frigorífica, emplear atmósfera modificada como método suplementario a la refrigeración, alargar el período de aptitud comercial. Metodología: se trabajó con fruta acondicionada a 0±1 °C y 90±5 % HR, según las siguientes variantes: 1. testigo: 20 kg fruta a granel sin seleccionar en caja plástica; 2. granel + film PVC: 10 kg de fruta a granel en bandejas de madera más cartón corrugado recubierta con film de PVC; 3. celpack: bandejas de madera recubiertas de cartón corrugado con dos celpack de 23 frutos cada uno; 4. celpack + atmósfera modificada: ídem anterior pero cada celpack en bolsa de polietileno de baja densidad de 20 μ. A partir de los 30 días de conservación se extrajo semanalmente, durante 9 semanas, una muestra de 46 frutos, de los cuales 23 fueron analizados al momento de ser extraídos y los 23 restantes luego de 48 horas de comercialización simulada (sc). Para la evaluación estadística se aplicó análisis de la varianza con el programa SAS (Statistical Analysis System) y se determinaron las diferencias entre tratamientos con el test de Duncan. Para sabor, en cambio, se aplicó una prueba de homogeneidad de P2. La evaluación de sabor se realizó mediante degustación con panel de 5 catadores entrenados. Resultados: Los frutos tenían las siguientes características al inicio de conservación: calibre 61.4 mm, peso 117.8 g, firmeza de pulpa 3.1 kgf, sabor agridulce, contenido de sólidos solubles 17.5 °Bx, acidez 0.78 g ác. málico%g, % cubrimiento 83.69 %. Luego de la conservación frigorífica (97días): % de color de cobertura 95 %. La firmeza de la pulpa en el tratamiento celpack + bolsa se diferencia con valores más altos, media de 2.8 kgf , el resto con media 2.6 kgf. En sc la firmeza es inferior y esta disminución es menor en celpack + bolsa. Sólidos solubles, media 17.21 °Bx, en sc valores con media de un 0.3 % más. Acidez titulable: disminución progresiva, de 0.68 a 0.47 g%g al fin de conservación. Sabor: a partir de los 59 días aumentan los frutos insípidos y desagradables excepto en celpack + bolsa. Síntomas de deshidratación: a partir de los 79 días la única variante que no presenta síntomas es celpack + bolsa. Conclusiones: El acondicionamiento en celpack redujo la incidencia de ataque por mohos (fue el único tratamiento sin ataque durante 94 días); tampoco presentó sabores desagradables y su limitación en conservación se debió a la deshidratación evidente a partir de 74 días. La fruta embalada en celpack + bolsa tuvo mayores valores de resistencia a la presión y 100 % de frutos sin deshidratación a los 94 días de conservación; a partir de 80 días es evidente el ataque de mohos y frutos con sabores desagradables. Las variantes granel y granel + film presentan deterioro por deshidratación a partir de 74 días. La conservación no debería superar 80 días. Celpack + bolsa muestra mejores resultados, con mayores valores de resistencia a la presión que los otros tratamientos; con respecto al sabor, mantiene una mayor proporción de sabor dulce.

Induced Resistance: Potential for Control of Postharvest Diseases of Horticultural Crops

Fortunately, plants have developed highly effective mechanisms with which to defend themselves when attacked by potentially disease-causing microorganisms. If not, then they would succumb to the many pathogenic fungi, bacteria, viruses, nematodes and insect pests, and disease would prevail. These natural defence systems of plants can be deliberately activated to provide some protection against the major pathogens responsible for causing severe yield losses in agricultural and horticultural crops. This is the basis of what is known as ‘induced’ or ‘acquired’ disease resistance in plants. Although the phenomenon of induced resistance has been known amongst plant pathologists for over 100 years, its inclusion into pest and disease management programmes has been a relatively recent development, ie. within the last 5 years. This review will discuss very briefly some of the characteristics of the induced resistance phenomenon, outline some of the advantages and limitations to its implementation and provide some examples within a postharvest pathology context. Finally some approaches being investigated by the fruit pathology team at DPI Indooroopilly and collaborators will be outlined.

Tomatoes for processing in the 90's: Postharvest handling.

Processing tomato industry has a high potential in Spain. Variety testing and mechanization studies and applications have been performed during the last 15 years. Many factors affect the quality and product losses during post-harvest handling which may be classified as: main or external factors: those related to the systems, procedures and devices; and fruit factors: those related to fruit properties. A research project is being carried on in the area of Vegas del Guadiana (Badajoz, Spain) to study these factors and to estimate costs, and to develop improved post-harvest handling practices.