Reproductive biology of Black Anglerfish (Lophius budegassa) in the northwestern Mediterranean Sea

Gonadal morphology and reproductive biology of the Black Anglerfish (Lophius budegassa) were studied by examining 4410 specimens collected between June 2007 and December 2010 in the northwestern Mediterranean Sea. Ovaries and testes presented traits common among fishes of the order Lophiiformes. Spawning occurred between November and March. Size at first maturity (L50) was 33.4 cm in total length (TL) for males and 48.2 cm TL for females. Black Anglerfish is a total spawner with group-synchronous oocyte development and determinate fecundity. Fecundity values ranged from 87,569 to 398,986 oocytes, and mean potential fecundity was estimated at 78,929 (standard error of the mean [SE] 13,648) oocytes per kilogram of mature female. This study provides the first description of the presence of 2–3 eggs sharing the same chamber and a semicystic type of spermatogenesis for Black Anglerfish. This new information allows for a better understanding of Black Anglerfish reproduction—knowledge that will be useful for the assessment and management of this species.

The effects of temperature and busulfan (Myleran) on the yellowtail tetra Astyanax altiparanae (Pisces, Characiformes) spermatogenesis

We aimed to standardize a protocol to suppress spermatogenesis in the characiform fish, Astyanax altiparanae, for future use as a host in germ cell transplant research, opening opportunities for a range of studies, such as spermatogenesis analyses and transgenesis because this species presents livestock characteristics to be used as a biological model. The effects of the chemotherapeutic busulfan (formulated as Myleran), which is used as medicine, therefore not as toxic to humans manipulation as analytical grade busulfan (Fluka) used in previous studies, were evaluated at physiological temperature of 28 °C, ideal for growth and reproduction of A altiparanae, and also at increased temperature 35 °C. The temperature groups were divided into three treatment groups: busulfan, DMSO only, and an untreated control. Macroscopic, histologic, stereological, and ultrastructure analysis showed that, at 28 °C, busulfan did not cause depletion of germ cells in A altiparanae. However, at 35 °C, sterilization was observed 3 weeks after the initial application. Similar results were obtained with maintenance of fish at 35 °C for a longer period with no accompanying Myleran treatment. This procedure allows reduction in stress and lower mortality resulting from manipulation during busulfan injection and is also suitable for mass treatment because large numbers of fish can be incubated in warm water.

Male and female reproductive morphology in the inseminating genus Astroblepus (Ostariophysi: Siluriformes: Astroblepidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ontogenia do trato digestório e desenvolvimento gonadal de Betta splendens: aspectos morfológicos

Pós-graduação em Aquicultura - FCAV

Avaliação da atividade gonadal de machos e fêmeas de pescada branca, Plagioscion squamosissimus (Heckel, 1840), (Pisces, Teleostei, Sciaenidae) no rio Pará (PA)

Fêmeas e machos adultos de P. squamosissimus (Pisces, Teleostei, Sciaenidae) foram coletados mensalmente no Rio Pará, que banha a ilha do Capim (PA) (S 010 34. 971`; W 0480 52.932`), durante o período de fevereiro de 2004 a fevereiro de 2005, correspondendo ao total de 234 espécimes. As gônadas foram coletadas, fixadas e processadas de acordo com os métodos usuais utilizados para processamento em parafina e análise em microscopia de luz. A espécie em estudo é uma das principais fontes de proteína animal para a população local, sendo capturada de forma intensa e ininterrupta ao longo do ano. Com base em informações dos pescadores locais, essa captura parece estar determinando uma aparente diminuição quantitativa e qualitativa em seus estoques locais. A espécie apresenta desova parcelada e o desenvolvimento gonadal foi caracterizado nos estádios de repouso, maturação, maduro e esvaziado ou semi-esvaziado. Gônadas maduras foram encontradas nos meses de dezembro, janeiro e julho. A análise de correlação entre o estádio gonadal maduro e a variação temporal da relação gonadossomática (ΔRGS) indica também a ocorrência de desova nos respectivos meses. Não obstante, as informações obtidas da correlação entre a ΔRGS e a média de oócitos maduros e percentual de espermatozóides por túbulo seminífero, respectivamente, também indicaram haver desova nos respectivos meses, sendo que aparentemente a espécie apresenta uma desova mais intensa ou desova principal entre os meses de dezembro e janeiro (inverno), e outra desova menos intensa ou secundária no mês de julho (verão). Com base no método da morfologia tubular, foram determinados oito estádios do ciclo do epitélio seminífero (CES), sendo que no estádio 1 os túbulos seminíferos são compostos por espermatogônias primárias e cistos de spermatogônias secundárias; o estádio 2 é composto por espermatogônias primárias e secundárias e cistos de espermatócitos; estádio 3 é caracterizado por espermatogônias primárias, secundárias, cistos de espermatócitos e de espermátides jovens ou recém-formadas; estádio 4 com túbulos seminíferos caracterizados pela presença de espermatogônias primárias e secundárias, espermatócitos e por cistos de espermátides jovens e tardias; estádio 5 apresenta todas as células anteriores e é marcado pelo surgimento de espermatozóides no lúmen tubular; estádio 6 tem como características a diminuição dos cistos de células germinativas e considerável aumento do número de espermatozóides no lúmen tubular; os túbulos seminíferos no estádio 7 contêm poucos cistos de células germinativas e se inicia o esvaziamento da massa de espermatozóides do lúmen tubular; estádio 8 é o último do CES e é caracterizado pela aparente desorganização dos cistos remanescentes de células germinativas no túbulo seminífero.

Diferenciação gonadal em Piaractus mesopotamicus

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Gonadal function in male patients with ankylosing spondylitis

Objective: To assess reproductive function in male ankylosing spondylitis (AS) patients in comparison to healthy controls. Methods: Twenty AS patients were compared to 24 healthy male subjects with regard to demographic data, urological examination, testicular ultrasound (US), semen analysis, anti-sperm antibodies, and hormone profile. Exclusion criteria were present use of sulfasalazine or methotrexate, and ever use of biological/cytotoxic agents. Disease activity of AS was evaluated by clinical and laboratory assessments. Results: Demographic data were similar in AS and controls (p = 0.175). Varicocele was found significantly more frequently in AS patients than in controls (40% vs. 8%, p = 0.027). Semen analysis revealed no significant differences in sperm quality between AS patients and controls (p > 0.05). By contrast, the median of normal sperm forms was significantly lower in AS patients with vs. those without varicocele [13.5 (range 2-27) vs. 22 (range 10-32.5)%, p = 0.049] whereas no difference in sperm morphology was observed comparing AS patients and controls without varicocele (p = 0.670). Comparison of AS patients with and without varicocele showed that anti-sperm antibodies, hormones, inflammatory markers, and disease activity scores did not contribute to the impaired sperm morphology observed in AS patients with varicocele. Conclusions: An increased frequency of varicocele was found in AS patients associated with sperm abnormalities but independent of therapy, anti-sperm antibodies, hormonal alterations, or disease parameters. Investigation for varicocele should be routine in AS patients with fertility problems.

The correlation of pore morphology, interconnectivity and physical properties of 3D ceramic scaffolds with bone ingrowth

In the design of tissue engineering scaffolds, design parameters including pore size, shape and interconnectivity, mechanical properties and transport properties should be optimized to maximize successful inducement of bone ingrowth. In this paper we describe a 3D micro-CT and pore partitioning study to derive pore scale parameters including pore radius distribution, accessible radius, throat radius, and connectivity over the pore space of the tissue engineered constructs. These pore scale descriptors are correlated to bone ingrowth into the scaffolds. Quantitative and visual comparisons show a strong correlation between the local accessible pore radius and bone ingrowth; for well connected samples a cutoff accessible pore radius of approximately 100 microM is observed for ingrowth. The elastic properties of different types of scaffolds are simulated and can be described by standard cellular solids theory: (E/E(0))=(rho/rho(s))(n). Hydraulic conductance and diffusive properties are calculated; results are consistent with the concept of a threshold conductance for bone ingrowth. Simple simulations of local flow velocity and local shear stress show no correlation to in vivo bone ingrowth patterns. These results demonstrate a potential for 3D imaging and analysis to define relevant pore scale morphological and physical properties within scaffolds and to provide evidence for correlations between pore scale descriptors, physical properties and bone ingrowth.

Effect of poly(acrylic acid) molecular mass and end-group functionality on calcium oxalate crystal morphology and growth

A number of series of poly(acrylic acids) (PAA) of differing end-groups and molecular mass were used to study the inhibition of calcium oxalate crystallization. The effects of the end-group on crystal speciation and morphology were significant and dramatic, with hexyl-isobutyrate end groups giving preferential formation of calcium oxalate dihydrate (COD) rather than the more stable calcium oxalate monohydrate (COM), while both more hydrophobic end-groups and less-hydrophobic end groups led predominantly to formation of the least thermodynamically stable form of calcium oxalate, calcium oxalate trihydrate. Conversely, molecular mass had little impact on calcium oxalate speciation or crystal morphology. It is probable that the observed effects are related to the rate of desorption of the PAA moiety from the crystal (lite) surfaces and that the results point to a major role for end-group as well as molecular mass in controlling desorption rate.

The patella morphology in trochlear dysplasia : a comparative MRI study

BACKGROUND: Trochlear dysplasia is suspected to have a genetic basis and causes recurrent patellar instability due to insufficient anatomical geometry. Numerous studies about trochlear morphology and the optimal surgical treatment have been carried out, but no attention has been paid to the corresponding patellar morphology.----- ----- PURPOSE: The aim of this study was the evaluation of the patellar morphology in normal and trochlear dysplastic knees. ----- ----- STUDY DESIGN: Biometric analysis. ----- ----- METHODS: Twenty two patellae with underlying trochlear dysplasia (study group--SG) were compared with 22 matched knees with normal trochlear shape (control group--CG) on transverse and sagittal MRI slices. We compared transverse diameter, cartilaginous thickness, Wiberg-index and -angle, length and radius of lateral and medial facet, patellar shape and angle, retropatellar length, and type of trochlear dysplasia. For statistical analysis we used the Wilcoxon signed ranks test. ----- ----- RESULTS: The transverse and sagittal diameter, mean length of medial patellar facet, and mean cartilaginous and subchondral Wiberg-index showed statistical differences between the two groups. ----- ----- CONCLUSIONS: Although the insufficient trochlear depth and decreased lateral trochlear slope are responsible for patellofemoral instability, the patella shows morphological changes in trochlear dysplastic knees. Its overall size and the medial facet are smaller. Although the femoral sulcus angle is larger, the Wiberg-angle and -index are equal to the control group. This may indicate that the patellar morphology may not be a result of missing medial patellofemoral pressure in trochlear dysplastic knees, but a decreased medial patellofemoral traction. This seems to be caused by hypotrophic medial patellofemoral restraints in combination with an increased lateral patellar tilt, both resulting in a decreased tension onto the medial patella facet. Whether there is a genetic component to the patellar morphology remains open.

Urban maze : A typological investigation in porous morphology and dynamic pedestrian networks

Mixed use typologies and pedestrian networks are two strategies commonly applied in design of the contemporary city. These approaches, aimed towards the creation of a more sustainalble urban environment, have their roots in the traditional, pre-industrial towns; they characterize urban form, articulating the tension between privaate and public realms through a series of typological variations as well as stimulating commercial activity in the city centre. Arcades, loggias and verandas are just some of the elements which can mediate this tension. Historically they have defined physical and social spaces with particular character; in the contemporary city these features are applied to deform the urban form and create a porous, dynamic morphology. This paper, comparing case studies from Italy, Japan and Australia, investigates how the design of the transition zone can define hybrid pedestrian networks, where a clear distinction between the public and private realms is no longer applicable. Pedestrians use the city in a dynamic way, combining trajectories on the public street with ones on the fringe or inside of the private built environment. In some cases, cities offer different pedestrian network possibilities at different times, as the commercial precints are subject to variations in accessibility across various timeframes. These walkable systems have an impact on the urban form and identity of places, redefining typologies and requiring an in depth analysis through plan, section and elevation diagrams.