862 resultados para Evolução


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The Parnaíba Basin consists in an intracratonic basin whose sucession of rocks is arranged in five supersequences. The Upper Carboniferous-Lower Triassic Sequence represents the third major sedimentary cycle and corresponds to Balsas Group, which is divided into four units: Piauí Formation, Pedra de Fogo Formation, Motuca Formation and Sambaíba Formation, from base to top. Different interpretations have been made by several authors in recent decades to interpreted the depositional system and environments related to each unit that belongs to this sequence. In general way, it is described as a thick pack of siliciclastic sediments deposited under complex conditions, varying from clastic/evaporitic shallow marine to lacustrine and desert environment. Aiming to clarify the sedimentary sequence evolution, this work underwent a stratigraphic analysis of the Upper Carboniferous-Lower Triassic deposits by applying modern concepts of the sequence stratigraphy based on well and seismic database. Three main depositional sequences of higher frequency were identified in each well analyzed. The sequence 1 corresponds to rocks initially deposited by a fluvial system with braided channel characteristics which evolved to shallow marine with coastal sabkha conditions related to a transgressive stage, that later evolved to a deltaic system. The Sequence 2 corresponds to rocks deposited in a lacustrine/desert environment associated with sabkha generated during a period of increased aridity in which the area occupied by the Parnaíba Basin had been suffering. The registration of a major regressive phase is shown in Sequence 2 which evolved to a dominantly desert environment recorded in Sequence 3. Seismic stratigraphy analyses allow to define a series of stratigraphic surfaces and related genetic units, as well as to infer its lateral expression. Seismic facies associated with such sequences are dominantly parallel and sub-parallel, with good lateral continuity, suggesting the sedimentary rate was relatively constant during deposition.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The Bom Jardim de Goiás Pluton (PBJG) is a semi-circular body, located in the central portion of the Tocantins Province, intrusive into orthogneisses and metassupracrustals of the Arenópolis Magmatic Arc. These metasupracrustals present a low to moderate dipping banding or schistosity, have a low to moderate angle of banding / foliation, defined by mica, andalusite and sillimanite and cordierite, which characterize an amphibolite facies metamorphism. This structure is crosscut by the emplacement of the PBJG rocks. The abrupt nature of the contacts and the absence of ductile structures indicate that the intrusion took place in a relatively cold crust. Under petrographic grounds, the pluton consists mainly of monzodiorites, tonalite and granodiorite, following the low to medium-K calk-alkaline alkaline trend. Rocks of the PBJG have hornblende and biotite as the main mafic phases, besides subordinate clinopyroxene, titanite, epidote and opaque. Late dikes of leucogranite contain only mineral biotite as relevant accessory mineral. One U-Pb zircon dating of a monzodiorite yielded an age of 550 ± 12 Ma (MSWD = 1.06). Whole-rock and mineral chemistry suggest that the studied rocks are calc-alkaline, having evolved by fractional crystallization of Ca- and Fe-Mg minerals under high oxygen fugacity. Using the amphibole-plagioclase geothermometer and the Al-in amphibole geobarometer, we calculate temperatures and pressures of, respectively, 692-791 °C e 2.4-5.0 kbar for the intrusion of the PBJG, which is corroborated by previous metamorphic assemblages in the country rocks. The geological, geochemical and geochronological features of PBJG demonstrate their post-tectonic or post-collisional nature, with emplacement into an already uplifted and relatively cool crust at the end of brasiliano orogeny in this portion of the Tocantins Province.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The Bom Jardim de Goiás Pluton (PBJG) is a semi-circular body, located in the central portion of the Tocantins Province, intrusive into orthogneisses and metassupracrustals of the Arenópolis Magmatic Arc. These metasupracrustals present a low to moderate dipping banding or schistosity, have a low to moderate angle of banding / foliation, defined by mica, andalusite and sillimanite and cordierite, which characterize an amphibolite facies metamorphism. This structure is crosscut by the emplacement of the PBJG rocks. The abrupt nature of the contacts and the absence of ductile structures indicate that the intrusion took place in a relatively cold crust. Under petrographic grounds, the pluton consists mainly of monzodiorites, tonalite and granodiorite, following the low to medium-K calk-alkaline alkaline trend. Rocks of the PBJG have hornblende and biotite as the main mafic phases, besides subordinate clinopyroxene, titanite, epidote and opaque. Late dikes of leucogranite contain only mineral biotite as relevant accessory mineral. One U-Pb zircon dating of a monzodiorite yielded an age of 550 ± 12 Ma (MSWD = 1.06). Whole-rock and mineral chemistry suggest that the studied rocks are calc-alkaline, having evolved by fractional crystallization of Ca- and Fe-Mg minerals under high oxygen fugacity. Using the amphibole-plagioclase geothermometer and the Al-in amphibole geobarometer, we calculate temperatures and pressures of, respectively, 692-791 °C e 2.4-5.0 kbar for the intrusion of the PBJG, which is corroborated by previous metamorphic assemblages in the country rocks. The geological, geochemical and geochronological features of PBJG demonstrate their post-tectonic or post-collisional nature, with emplacement into an already uplifted and relatively cool crust at the end of brasiliano orogeny in this portion of the Tocantins Province.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The micro-deformations caused by cyclic loading origins the variation of the distances between atoms of the crystal lattice producing the irreversible component. In order to study and understand the microstructural behavior of the material this paper investigated the influence suffered by residual stresses in thrust rolling bearing races fabricated in AISI 52100 steel, after tests by cyclic rolling contact in a tribometer at 1m/s under two contact pressures (500 MPa and 1400 MPa) in dry and boundary lubrication conditions. Procedures of tests thermo-acustically isolated were developed for monitoring the contact temperature and sound pressure level signals to establish a comparison between the residual stress measurements, micro-hardness Vickers and micrographic registers searching an indication of wear evolution. The sin²ψ method by X-ray diffraction technique was used to quantify the residual stresses. Three raceway zones were selected for the evaluation of wear and surface morphology after predetermined cycling, comparing with their new condition ("as received"). Micro-hardness and residual stress measurements showed significant changes after the tests and it was possible to observe the relationship between the increase of sound pressure level and the residual stress for dry and lubricated conditions.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The micro-deformations caused by cyclic loading origins the variation of the distances between atoms of the crystal lattice producing the irreversible component. In order to study and understand the microstructural behavior of the material this paper investigated the influence suffered by residual stresses in thrust rolling bearing races fabricated in AISI 52100 steel, after tests by cyclic rolling contact in a tribometer at 1m/s under two contact pressures (500 MPa and 1400 MPa) in dry and boundary lubrication conditions. Procedures of tests thermo-acustically isolated were developed for monitoring the contact temperature and sound pressure level signals to establish a comparison between the residual stress measurements, micro-hardness Vickers and micrographic registers searching an indication of wear evolution. The sin²ψ method by X-ray diffraction technique was used to quantify the residual stresses. Three raceway zones were selected for the evaluation of wear and surface morphology after predetermined cycling, comparing with their new condition ("as received"). Micro-hardness and residual stress measurements showed significant changes after the tests and it was possible to observe the relationship between the increase of sound pressure level and the residual stress for dry and lubricated conditions.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Recent endogenous processes provide dynamic movements in the lithosphere and generate the varied forms of relief, even in areas of passive continental margins, such as the research area of this work located in northeastern Brazil. The reactivation of Precambrian basement structures, after the breakup between South America and Africa in the Cretaceous played an important role in the evolution of basins, which provided generated forms of relief. These morphodynamic characteristics can be easily observed in marginal basins that exhibit strong evidence fault reactivations. The purpose of this study is to investigate the influence of morphotectonic processes in the landscape structuring of Paraíba Basin. Therefore, we used aeromagnetic, high–resolution images of the Shuttle Radar Topographic Mission–SRTM, structural geological data, deep well data and geological field data. Based on the results of the data was observed that some preexisting structures in the crystalline basement coincide with magnetic and topographic lineaments interpreted as fault reactivation of the Post–Miocene units in the Paraíba Basin. Faults that offset lithostratigraphic units provided evidence that tectonic activity associated with the deposition and erosion in the Paraíba Basin occurred from Cretaceous to the Quaternary. The neotectonic activity that occurred in Paraíba Basin was able to influence the deposition of sedimentary units and landforms. It indicates that the deposition of post–Cretaceous units was influenced by reactivation of Precambrian basement structures in this part of the Brazilian continental margin.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Projeto de Investigação apresentado para a obtenção do grau de Mestre em Psicologia do Desporto e do Exercício

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work's objective is the development of a methodology to represent an unknown soil through a stratified horizontal multilayer soil model, from which the engineer may carry out eletrical grounding projects with high precision. The methodology uses the experimental electrical apparent resistivity curve, obtained through measurements on the ground, using a 4-wire earth ground resistance tester kit, along with calculations involving the measured resistance. This curve is then compared with the theoretical electrical apparent resistivity curve, obtained through calculations over a horizontally strati ed soil, whose parameters are conjectured. This soil model parameters, such as the number of layers, in addition to the resistivity and the thickness of each layer, are optimized by Differential Evolution method, with enhanced performance through parallel computing, in order to both apparent resistivity curves get close enough, and it is possible to represent the unknown soil through the multilayer horizontal soil model fitted with optimized parameters. In order to assist the Differential Evolution method, in case of a stagnation during an arbitrary amount of generations, an optimization process unstuck methodology is proposed, to expand the search space and test new combinations, allowing the algorithm to nd a better solution and/or leave the local minima. It is further proposed an error improvement methodology, in order to smooth the error peaks between the apparent resistivity curves, by giving opportunities for other more uniform solutions to excel, in order to improve the whole algorithm precision, minimizing the maximum error. Methodologies to verify the polynomial approximation of the soil characteristic function and the theoretical apparent resistivity calculations are also proposed by including middle points among the approximated ones in the verification. Finally, a statistical evaluation prodecure is presented, in order to enable the classication of soil samples. The soil stratification methodology is used in a control group, formed by horizontally stratified soils. By using statistical inference, one may calculate the amount of soils that, within an error margin, does not follow the horizontal multilayer model.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O efeito conjugado das imposições da grande distribuição e dos consumidores cada vez mais exigentes levou os intervenientes do sector alimentar a considerarem a certificação dos seus produtos e/ou sistemas de produção por referenciais específicos. Todas as organizações que intervêm na cadeia alimentar têm a responsabilidade de colocar no mercado produtos alimentares cujas condições de higiene e segurança estejam devidamente garantidas. O trabalho desenvolvido no presente Projecto consistiu na preparação da implementação da norma NP EN ISSO 22000:2005 na empresa Cores Doces, Lda, dedicada ao comércio de doçaria. Tendo já o sistema HACCP implementado, a certificação através da norma de gestão da segurança alimentar NP EN ISSO 22000:2005 era um objetivo estratégico da administração da empresa uma vez que é este o referencial de segurança alimentar que melhor se adapta à realidade e objetivos da empresa e seus parceiros. O plano de trabalhos teve como objetivo fazer a transição entro o sistema HACCP (hazard Analysis and Critical Control Points) já implementado e certificado, para a implementação e certificação segundo os requisitos da norma NP EN ISSO 22000:2005. Para o efeito foram numa primeira fase identificadas as principais diferenças entre os dois sistemas de gestão da segurança alimentar. Esta análise permitiu diagnosticar as alterações processuais a implantar e os documentos a elaborar para a constituição da estrutura documental do sistema segundo a ISO 22000:2005. As principais alterações efetuadas foram a nível do Planeamento e Realização de Produtos Seguros, nomeadamente a análise de risco. Numa segunda fase foram apresentadas as alterações na empresa perante a transição para a ISSO onde se deu destaque aos aspetos relacionados com a responsabilidade da gestão, a compatibilização com os outros sistemas de gestão que possam ser criados na empresa (qualidade, ambiente, segurança e saúde); onde se fez igualmente a correspondência entre o Codex e a ISSO com destaque para o capítulo 7 na Norma ( Planeamento e Realização de Produtos Seguros), explorando os restantes capítulos que permitem introduzir na organização um ciclo de PDCA (Planear, Realizar, Avaliar e Corrigir). Finalmente foi elaborado um auxiliar de transição do sistema HACCP para a ISSO 22000 que possa servir de ferramenta para outras organizações.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A utilização da internet para efetuar reservas on-line de alojamento no setor hoteleiro, tem um peso cada vez maior no conjunto das reservas efetuadas. É por isso, necessário que sejam elaborados estudos que permitam perceber a evolução dos preços oferecidos ao cliente, ao longo do tempo, nos diversos sites de reserva on-line e no site do próprio hotel, para que quer os clientes quer os gestores possuam informação rigorosa que lhes permita tomar decisões e elaborar estratégias eficazes. Nesta investigação, apresentar-se-á a evolução dos preços médios dos hotéis em estudo, obtida a partir da consulta de um conjunto de sites de reserva on-line que previamente se definiram e do site institucional, consulta efetuada ao longo dos dois períodos de doze dias que antecederam a época festiva da Páscoa e uma época não festiva. A investigação empírica efetuada, neste trabalho, foi realizada com base num estudo de caso exploratório, tendo como objeto de estudo os hotéis de 5 estrelas do concelho de Lisboa, tendo em conta os dados secundários disponíveis. O recurso ao estudo de caso permitiu delimitar de modo preciso o contexto desta investigação. A opção pelo tipo de pesquisa exploratória teve em conta o facto de se conhecer pouca bibliografia científica disponível sobre a temática em estudo. Os resultados obtidos permitiram perceber qual foi a evolução dos preços ao longo do período de consulta para a época festiva da Páscoa e para a época não festiva, possibilitando depois fazer a comparação da evolução dos preços entre as duas épocas. Da análise dos dados pôde ainda perceber-se se havia concertação entre os vários meios de reserva consultados, ou seja, entre os sites de reserve on-line considerados e o site institucional. Tomando por base os hotéis que durante os períodos de consulta foram esgotando pode, ainda, observar-se o comportamento dos preços médios em relação à variação da oferta disponível.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A indústria bancária brasileira investe de forma contínua em Tecnologia da Informação e Comunicação (TIC) e cinco bancos detêm mais de 60% dos ativos, lucros e agências. A partir deste cenário, o objetivo desse trabalho foi evidenciar os números relativos aos investimentos em TIC realizados pela indústria bancária no período de 2000 a 2011 e seu correspondente crescimento de uma forma geral. Em particular, evidencia ainda números relevantes aos investimentos e o respectivo crescimento dos dois maiores bancos múltiplos privados atuantes no Brasil (Itaú e Bradesco). Por meio de pesquisa documental e revisão da literatura, são apontados os principais indicadores que levam a concluir sobre a continuidade crescente do setor, sobre o fortalecimento dos bancos Bradesco e Itaú, assim como a relação com investimentos contínuos em TIC.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Este trabalho investiga o desenvolvimento socioeconômico brasileiro. Trata-se de uma pesquisa exploratória, baseada nos dados disponíveis do relatório Atlas do Desenvolvimento, Brasil, que apura o comportamento dos índices relacionados às três dimensões do desenvolvimento: renda, educação e saúde. No caso brasileiro, este estudo desdobra-se a todos os municípios. Entre os estados, o Tocantins foi o que obteve maior crescimento nas séries históricas disponíveis para consulta (1991, 2000, 2010). Diante do resultado, questionam-se quais mudanças acompanharam a evolução do indicador. Para investigar essa questão delimitou-se como objetivo desse estudo analisar os indicadores dos doze municípios que obtiveram crescimento superior a 60% entre 2000 a 2010 no IDHM. Os resultados do estudo apontam que entre as três dimensões avaliadas, a educação é a que mais se destaca. Além disso, o acesso a serviços públicos também obteve significativa melhora acompanhado de uma queda nos indicadores relacionados à pobreza.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Os museus como centros de ciências, enquanto espaços de educação não formal podem, por meio da participação ativa do público, promover a compreensão da ciência ao aguçar a curiosidade do indivíduo e estimular o prazer pela descoberta. Ação desenvolvida como intervenção acadêmica, social e cultural associada ao PIBID/UFRN/Biologia, tem como objetivo avaliar o uso de espaço de ensino não formal, na aprendizagem de conceitos, promovendo a alfabetização científica através de uma exposição em um museu de ciências e morfológicas. A visitação foi realizada no Museu de Ciências Morfológicas da UFRN, com alunos do 1º ano do ensino médio da escola Estadual Lourdes Guilherme, sendo aplicados questionários de pré e pós-visita sobre a Evolução dos Vertebrados, com intuito de analisar a contribuição do museu na aprendizagem destes conteúdos. A porcentagem de acertos no questionário pré-visita variou entre 8 e 68% em relação ao conhecimento geral dos alunos quanto à evolução dos vertebrados, enquanto no pós-visita essa variação foi de 16 a 90%. Com base nesses primeiros resultados verificamos o quanto os museus interativos de ciência se apresentam como um espaço educativo complementar à educação formal, possibilitando a ampliação e a melhoria do conhecimento científico de estudantes. Isso demonstra que o uso de espaços não formais contribui para a aprendizagem significativa, além de promover a alfabetização científica destes alunos ao gerar a compreensão da ciência e aguçar a curiosidade dos mesmos para o prazer da descoberta.