704 resultados para Engenharia de produção


Relevância:

60.00% 60.00%

Publicador:

Resumo:

The maintenance of systems and equipment is a central question related to Production Engineering. Although systems are not fully reliable, it is often necessary to minimize the failure occurrence likelihood. The failures occurrences can have disastrous consequences during a plane flight or operation of a nuclear power plant. The elaboration of a maintenance plan has as objective the prevention and recovery from system failures, increasing reliability and reducing the cost of unplanned shutdowns. It is also important to consider the issues related to organizations safety, especially those dealing with dangerous technologies. The objective of this thesis is to propose a method for maintenance analysis of a nuclear research reactor, using a socio-technical approach, and focused on existing conditions in Brazil. The research reactor studied belongs to the federal government and it is located in the city of Rio de Janeiro. The specific objective of this thesis is to develop the availability analysis of one of the principal systems of the research reactor, the nuclear instrumentation system. In this analysis, were taken into account not only the technical aspects of the modules related to nuclear instrumentation system, but also the human and organizational factors that could affect the availability of the nuclear instrumentation system. The results showed the influence of these factors on the availability of the nuclear instrumentation system.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

O presente artigo tem como objetivo apresentar uma proposta de um plano para desenvolvimento da estratégia logística de uma Universidade Federal multicampi localizada no Rio Grande do Sul com base na adaptação da metodologia proposta por Roobeson e Copacino (1994). Nesse trabalho primeiramente são descritas as principais abordagens teóricas a respeito de estratégia logística, após é apresentado o ambiente de aplicação, destacando suas características institucionais e, por fim tem-se a descrição das etapas e atividades desenvolvidas ao longo da intervenção. Como resultado tem-se um plano para desenvolvimento da estratégia logística composto por alguns programas com objetivos específicos, classificados de acordo com área de atuação, dimensão operacional e nível de implementação. Também é apresentada uma proposta de uma estrutura para gerenciamento da mudança e realizada uma análise de riscos

Relevância:

60.00% 60.00%

Publicador:

Resumo:

PEDRO, Edilson da Silva; ALVES, Maria Rita Pontes Assumpção. Capacitaçao e gestao tecnologica agroindustrial: um estudo de caso no setor sucroalcooleiro. In: SIMPOSIO DE ENGENHARIA DE PRODUÇAO, 10., 2003, Bauru, SP. Anais...Bauru, SP: UNESP, 2003.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

PEDRO, Edilson da Silva; ASSUMPÇAO, Maria Rita Pontes. Capacitação tecnológica em usina do setor sucroalcooleiro. In: ENCONTRO NACIONAL DE ENGENHARIA DE PRODUÇAO, 23., Ouro Preto,MG, 2003. Anais...Ouro Preto, MG: UFOP, 2003.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

RAMOS, A. S. M. Estágio da difusão das tecnologias internet em organizações acadêmicas. In: ENCONTRO NACIONAL DE PRODUÇÂO, 18., 1998, Niteroi-RJ. Anais... Niteroi: ENP, 1998.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

RAMOS, A. S. M.; OLIVEIRA, M. A. Fatores de sucesso na implementação de sistemas integrados de gestão empresarial (ERP): estudo de caso em uma média empresa. In: ENCONTRO NACIONAL DE ENGENHARIA DE PRODUÇÂO, 22., 2002, Curitiba-PR. Anais... Porto Alegre-RS: ABEPRO, 2002. v. 1.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

CAMPOS,Maria da Luz Góis; ANEZ,Miguel Eduar- do Moreno; CARÍCIO,Marcelo Rique. Estratégias de Competitividade Industrial em Empresas Cooperativas:O caso COMTERN. In:ENCONTRO NACIONAL DE ENGENHARIA DE PRODUÇÃO, 23, 2003, Minas Gerais. Anais...Ouro Petro: ADEPRO, 2003. p. 1-8.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Supply chains have become an important focus for competitive advantage. The performance of a company increasingly depends on its ability to maintain effective and efficient relationships with its suppliers and customers. The extended enterprise (i.e. composed of several partners) needs to be dynamically formed in order to be agile and adaptable. According to the Digital Manufacturing paradigm, companies have to be able to quickly share and disseminate information regarding planning, designing and manufacturing of products. Additionally, they must be responsive to all technical and business determinants, as well as be assessed and certified for guaranteed performance. The current research intends to present a solution for the dynamic composition of the extended enterprise, formed to take advantage of market opportunities quickly and efficiently. A construction model was developed. This construction model consists of: information model, protocol model and process model. The information model has been defined based on the concepts of Supply Chain Operations Reference model (SCOR®). In this model is defined information for negotiating the participation of candidate companies in the dynamic establishment of a network for responding to a given demand for developing and manufacturing products, in seven steps as follows: request for information; request for qualification; alignment of strategy; request for proposal; request for quotation; compatibility of process; and compatibility of system. The protocol model has been elaborated and inspired in the OSI, this model provides a framework for linking customers and suppliers, indicates a sequence to be followed, in order to selecte companies to become suppliers. The process model has been implemented by means of process modeling according to the BPMN standard and, in turn, implemented as a web-based application that runs the process through its several steps, which uses forms to gather data. An application example in the context of the oil and gas industry is used for demonstrating the solution concept.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The municipal management in any country of the globe requires planning and allocation of resources evenly. In Brazil, the Law of Budgetary Guidelines (LDO) guides municipal managers toward that balance. This research develops a model that seeks to find the balance of the allocation of public resources in Brazilian municipalities, considering the LDO as a parameter. For this using statistical techniques and multicriteria analysis as a first step in order to define allocation strategies, based on the technical aspects arising from the municipal manager. In a second step, presented in linear programming based optimization where the objective function is derived from the preference of the results of the manager and his staff. The statistical representation is presented to support multicriteria development in the definition of replacement rates through time series. The multicriteria analysis was structured by defining the criteria, alternatives and the application of UTASTAR methods to calculate replacement rates. After these initial settings, an application of linear programming was developed to find the optimal allocation of enforcement resources of the municipal budget. Data from the budget of a municipality in southwestern Paraná were studied in the application of the model and analysis of results.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

This work was general-purpose, develop a proposal of a theoretical model of decisionmaking with a focus on management of small family farms costs, which enables support for decision making. And the following objectives: i) develop a structured methodology, which allows to form a literary basis to provide scientific support for the implementation of research; ii) develop based on the literature the dimensions and variables of the necessary models to propose an application and iii tooling) to implement the proposed model within the dimensions and variables, and validate every stage background and perform the necessary conclusions to verify the effectiveness of applied model. In terms of methodology, we used a structured methodology, which allowed forming a bibliographic portfolio of 29 articles, and through the research constructs developed, based on an existing model, an activity segmentation model for aid farmer of small family farms in the decision-making process with emphasis on cost management. The model was applied in six family farms in the South West region of Parana and Santa Catarina West. With regard to the search results, it was identified that the model can be applied to the specific context for which it was created. It was also possible to identify that the proposed model was valid and relevant to aid in the management of family farms by identifying, through the targeting of productive activities, investment priorities guided by the balance between managing costs and return activities. Moreover, possible to target the activities of six surveyed properties, demonstrating that the property 02, has the shape of more complex segmentation should be divided into three groups of activities, which can be conducted in parallel without any restrictions between activities. Other properties have the segmentation of the simplest activities, allowing viewing in this way that there are activities of groups that require prioritizing investments. Specifically the property 01 and 04 have the highest priority investment target groups, the most prominent activities of groups representing respectively 49.32% and 47.40%, which are represented by grain production activities on the property 01 and grain production, beef cattle and eggs on the property 04.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Higher Education Institutions (HEIs) have an extremely important social role, they are responsible for the place where they work and to form citizens who contribute to a fair and cooperative society. Universities can engage with sustainable development in planning, management, education, research, operations, community services, procurement of materials, transportation and infrastructure; this research seeks to analyze the sustainability practices in service operations in the Higher Education Institutions of the Federal Network of Professional, Scientific and Technological Education in Brazil through the development and application of a model called the Sustainability Assessment for Higher Technological Education (SAHTE). To achieve the proposed goal, a systematic survey of the scientific literature on sustainability assessment models in higher education institutions was conducted, making it possible to identify the characteristics and features of existing models. The model was applied through multiple case studies. The proposal compares the sustainability performance of service operations among individual institutions using a common methodology. It presents five areas to be evaluated in the HEI: Governance and Policies, People, Food, Water and Energy, and Waste and Environment, with a total of 134 questions. The need for greater support from the senior management of institutions to formulate and implement policies on sustainable development was identified when the lack of policies on sustainability in service operations was found; initiatives tend to be isolated. The participation of students and teachers in studies on the daily operations of the campus can be expanded and more widespread. The model seeks to evaluate sustainable practices in the service operations of the Brazilian Federal Network of Professional, Scientific and Technological Education; studies related to the evaluation of teaching sustainability are absent and the applicability of the model in private institutions and other countries is needed. The results obtained with the application of the SAHTE model are useful for the preparation and development of policies on sustainable development, especially in the service operations of the surveyed HEI. The results can sensitize staff and students, who can reflect on their roles in the HEI, as well as the community and suppliers.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Dissertação de Mestrado em Engenharia Zootécnica/Produção Animal

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Dissertação de Mestrado em Engenharia Zootécnica/Produção Animal

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Dissertação de Mestrado em Engenharia Zootécnica / Produção Animal