25 years of knowledge creation processes in pharmaceutical contemporary trends

The pharmaceutical industry is knowledge and research-intensive. Due to technological, socio-political and organisational changes there has been a continuous evolution in the knowledge base utilized to achieve and maintain competitive advantages in this global industry. There is a gap in analysing the linkages and effects of those changes on knowledge creation processes associated with pharmaceutical R&D activities. Our paper looks to fill this gap. We built on an idiosyncratic research approach – the systematic literature review – and looked to unearth current trends affecting knowledge creation in international/global pharmaceutical R&D. We reviewed scientific papers published between 1980 and 2005. Key findings include promising trends in pharmaceutical innovation and human resource management, and their potential implications on current R&D practices within the pharmaceutical industry, from managerial and policy-making perspectives.

Protein complementation assay as a display system for screening protein libraries in the intracellular environment

A wide range of screening strategies have been employed to isolate antibodies and other proteins with specific attributes, including binding affinity, specificity, stability and improved expression. However, there remains no high-throughput system to screen for target-binding proteins in a mammalian, intracellular environment. Such a system would allow binding reagents to be isolated against intracellular clinical targets such as cell signalling proteins associated with tumour formation (p53, ras, cyclin E), proteins associated with neurodegenerative disorders (huntingtin, betaamyloid precursor protein), and various proteins crucial to viral replication (e.g. HIV-1 proteins such as Tat, Rev and Vif-1), which are difficult to screen by phage, ribosome or cell-surface display. This study used the β-lactamase protein complementation assay (PCA) as the display and selection component of a system for screening a protein library in the cytoplasm of HEK 293T cells. The colicin E7 (ColE7) and Immunity protein 7 (Imm7) *Escherichia coli* proteins were used as model interaction partners for developing the system. These proteins drove effective β-lactamase complementation, resulting in a signal-to-noise ratio (9:1 – 13:1) comparable to that of other β-lactamase PCAs described in the literature. The model Imm7-ColE7 interaction was then used to validate protocols for library screening. Single positive cells that harboured the Imm7 and ColE7 binding partners were identified and isolated using flow cytometric cell sorting in combination with the fluorescent β-lactamase substrate, CCF2/AM. A single-cell PCR was then used to amplify the Imm7 coding sequence directly from each sorted cell. With the screening system validated, it was then used to screen a protein library based the Imm7 scaffold against a proof-of-principle target. The wild-type Imm7 sequence, as well as mutants with wild-type residues in the ColE7- binding loop were enriched from the library after a single round of selection, which is consistent with other eukaryotic screening systems such as yeast and mammalian cell-surface display. In summary, this thesis describes a new technology for screening protein libraries in a mammalian, intracellular environment. This system has the potential to complement existing screening technologies by allowing access to intracellular proteins and expanding the range of targets available to the pharmaceutical industry.

Crisis communication under transformative change : the emergent context and roles of primary and secondary organisations

In an era of complex challenges that draw sustained media attention and entangle multiple organisational actors, this thesis addresses the gap between current trends in society and business, and existing scholarship in public relations and crisis communication. By responding to calls from crisis communication researchers to develop theory (Coombs, 2006a), to examine the interdependencies of crises (Seeger, Sellnow, & Ulmer, 1998), and to consider variation in crisis response (Seeger, 2002), this thesis contributes to theory development in crisis communication and public relations. Through transformative change, this thesis extends existing scholarship built on a preservation or conservation logic where public relations is used to maintain stability by incrementally responding to changes in an organisation‘s environment (Cutlip, Center, & Broom, 2006; Everett, 2001; Grunig, 2000; Spicer, 1997). Based on the opportunity to contribute to ongoing theoretical development in the literature, the overall research problem guiding this thesis asks: How does transformative change during crisis influence corporate actors’ communication? This thesis adopts punctuated equilibrium theory, which describes change as alternating between long periods of stability and short periods of revolutionary or transformative change (Gersick, 1991; Romanelli & Tushman, 1994; Siggelkow, 2002; Tushman, Newman, & Romanelli, 1986; Tushman & Romanelli, 1985). As a theory for change, punctuated equilibrium provides an opportunity to examine public relations and transformative change, building on scholarship that is based primarily on incremental change. Further, existing scholarship in public relations and crisis communication focuses on the actions of single organisations in situational or short-term crisis events. Punctuated equilibrium theory enables the study of multiple crises and multiple organisational responses during transformative change. In doing so, punctuated equilibrium theory provides a framework to explain both the context for transformative change and actions or strategies enacted by organisations during transformative change (Tushman, Newman, & Romanelli, 1986; Tushman & Romanelli, 1985; Tushman, Virany, & Romanelli, 1986). The connections between context and action inform the research questions that guide this thesis: RQ1: What symbolic and substantive strategies persist and change as crises develop from situational events to transformative and multiple linked events? RQ2: What features of the crisis context influence changes in symbolic and substantive strategies? To shed light on these research questions, the thesis adopts a qualitative approach guided by process theory and methods to explicate the events, sequences and activities that were essential to change (Pettigrew, 1992; Van de Ven, 1992). Specifically, the thesis draws on an alternative template strategy (Langley, 1999) that provides several alternative interpretations of the same events (Allison, 1971; Allison & Zelikow, 1999). Following Allison (1971) and Allison and Zelikow (1999), this thesis uses three alternative templates of crisis or strategic response typologies to construct three narratives using media articles and organisational documents. The narratives are compared to identify and draw out different patterns of crisis communication strategies that operate within different crisis contexts. The thesis is based on the crisis events that affected three organisations within the pharmaceutical industry for four years. The primary organisation is Merck, as its product recall crisis triggered transformative change affecting, in different ways, the secondary organisations of Pfizer and Novartis. Three narratives are presented based on the crisis or strategic response typologies of Coombs (2006b), Allen and Caillouet (1994), and Oliver (1991). The findings of this thesis reveal different stories about crisis communication under transformative change. By zooming in to a micro perspective (Nicolini, 2009) to focus on the crisis communication and actions of a single organisation and zooming out to a macro perspective (Nicolini, 2009) to consider multiple organisations, new insights about crisis communication, change and the relationships among multiple organisations are revealed at context and action levels. At the context level, each subsequent narrative demonstrates greater connections among multiple corporate actors. By zooming out from Coombs‘ (2006b) focus on single organisations to consider Allen and Caillouet‘s (1994) integration of the web of corporate actors, the thesis demonstrates how corporate actors add accountability pressures to the primary organisation. Next, by zooming further out to the macro perspective by considering Oliver‘s (1991) strategic responses to institutional processes, the thesis reveals a greater range of corporate actors that are caught up in the process of transformative change and accounts for their varying levels of agency over their environment. By zooming in to a micro perspective and out to a macro perspective (Nicolini, 2009) across alternative templates, the thesis sheds light on sequences, events, and actions of primary and secondary organisations. Although the primary organisation remains the focus of sustained media attention across the four-year time frame, the secondary organisations, even when one faced a similar starting situation to the primary organisation, were buffered by the process of transformative change. This understanding of crisis contexts in transforming environments builds on existing knowledge in crisis communication. At the action level, the thesis also reveals different interpretations from each alternative template. Coombs‘ (2006b) narrative shows persistence in the primary organisation‘s crisis or strategic responses over the four-year time frame of the thesis. That is, the primary organisation consistently applies a diminish crisis response. At times, the primary organisation drew on denial responses when corporate actors questioned its legitimacy or actions. To close the crisis, the primary organisation uses a rebuild crisis posture (Coombs, 2006). These finding are replicated in Allen and Caillouet‘s (1994) narrative, noting this template‘s limitation to communication messages only. Oliver‘s (1991) narrative is consistent with Coombs‘ (2006b) but also demonstrated a shift from a strategic response that signals conformity to the environment to one that signals more active resistance to the environment over time. Specifically, the primary organisation‘s initial response demonstrates conformity but these same messages were used some three years later to set new expectations in the environment in order to shape criteria and build acceptance for future organisational decisions. In summary, the findings demonstrate the power of crisis or strategic responses when considered over time and in the context of transformative change. The conclusions of this research contribute to scholarship in the public relations and management literatures. Based on the significance of organisational theory, the primary contribution of the theory relates to the role of interorganisational linkages or legitimacy buffers that form during the punctuation of equilibrium. The network of linkages among the corporate actors are significant also to the crisis communication literature as they form part of the process model of crisis communication under punctuated equilibrium. This model extends existing research that focuses on crisis communication of single organisations to consider the emergent context that incorporates secondary organisations as well as the localised contests of legitimacy and buffers from regulatory authorities. The thesis also provides an empirical base for punctuated equilibrium in public relations and crisis communication, extending Murphy‘s (2000) introduction of the theory to the public relations literature. In doing this, punctuated equilibrium theory reinvigorates theoretical development in crisis communication by extending existing scholarship around incrementalist approaches and demonstrating how public relations works in the context of transformative change. Further research in this area could consider using alternative templates to study transformative change caused by a range of crisis types from natural disasters to product tampering, and to add further insight into the dynamics between primary and secondary organisations. This thesis contributes to practice by providing guidelines for crisis response strategy selection and indicators related to the emergent context for crises under transformative change that will help primary and secondary organisations‘ responses to crises.

Under the carpet : the politics and trauma of patient harm

Few studies have investigated iatrogenic outcomes from the viewpoint of patient experience. To address this anomaly, the broad aim of this research is to explore the lived experience of patient harm. Patient harm is defined as major harm to the patient, either psychosocial or physical in nature, resulting from any aspect of health care. Utilising the method of Consensual Qualitative Research (CQR), in-depth interviews are conducted with twenty-four volunteer research participants who self-report having been severely harmed by an invasive medical procedure. A standardised measure of emotional distress, the Impact of Event Scale (IES), is additionally employed for purposes of triangulation. Thematic analysis of transcript data indicate numerous findings including: (i) difficulties regarding patients‘ prior understanding of risks involved with their medical procedure; (ii) the problematic response of the health system post-procedure; (iii) multiple adverse effects upon life functioning; (iv) limited recourse options for patients; and (v) the approach desired in terms of how patient harm should be systemically handled. In addition, IES results indicate a clinically significant level of distress in the sample as a whole. To discuss findings, a cross-disciplinary approach is adopted that draws upon sociology, medicine, medical anthropology, psychology, philosophy, history, ethics, law, and political theory. Furthermore, an overall explanatory framework is proposed in terms of the master themes of power and trauma. In terms of the theme of power, a postmodernist analysis explores the politics of patient harm, particularly the dynamics surrounding the politics of knowledge (e.g., notions of subjective versus objective knowledge, informed consent, and open disclosure). This analysis suggests that patient care is not the prime function of the health system, which appears more focussed upon serving the interests of those in the upper levels of its hierarchy. In terms of the master theme of trauma, current understandings of posttraumatic stress disorder (PTSD) are critiqued, and based on data from this research as well as the international literature, a new model of trauma is proposed. This model is based upon the principle of homeostasis observed in biology, whereby within every cell or organism a state of equilibrium is sought and maintained. The proposed model identifies several bio-psychosocial markers of trauma across its three main phases. These trauma markers include: (i) a profound sense of loss; (ii) a lack of perceived control; (iii) passive trauma processing responses; (iv) an identity crisis; (v) a quest to fully understand the trauma event; (vi) a need for social validation of the traumatic experience; and (vii) posttraumatic adaption with the possibility of positive change. To further explore the master themes of power and trauma, a natural group interview is carried out at a meeting of a patient support group for arachnoiditis. Observations at this meeting and members‘ stories in general support the homeostatic model of trauma, particularly the quest to find answers in the face of distressing experience, as well as the need for social recognition of that experience. In addition, the sociopolitical response to arachnoiditis highlights how public domains of knowledge are largely constructed and controlled by vested interests. Implications of the data overall are discussed in terms of a cultural revolution being needed in health care to position core values around a prime focus upon patients as human beings.

Interactive conference voting

We describe and analyze opinion polling results from interactive voting procedures undertaken before and after presentations during the Outcome Measures in Rheumatoid Arthritis Clinical Trials Conference (OMERACT II) in Ottawa, Canada, June 30-July 2, 1994. The scoring procedure was a matched voting design; when a participant used the same keypad at the beginning and end of voting, change within a participant could be estimated. Participants, experienced in the rheumatic diseases included clinicians, researchers, methodologists, regulators, and representatives of the pharmaceutical industry. Patients under consideration were those with any rheumatic diseases. Questions were constructed to evaluate the change in voting behavior expected from the content of the presentation. Statistically significant and substantively important changes were evident in most questions.

Mathematical modelling of controlled drug release from polymer micro-spheres : incorporating the effects of swelling, diffusion and dissolution via moving boundary problems

Controlled drug delivery is a key topic in modern pharmacotherapy, where controlled drug delivery devices are required to prolong the period of release, maintain a constant release rate, or release the drug with a predetermined release profile. In the pharmaceutical industry, the development process of a controlled drug delivery device may be facilitated enormously by the mathematical modelling of drug release mechanisms, directly decreasing the number of necessary experiments. Such mathematical modelling is difficult because several mechanisms are involved during the drug release process. The main drug release mechanisms of a controlled release device are based on the device’s physiochemical properties, and include diffusion, swelling and erosion. In this thesis, four controlled drug delivery models are investigated. These four models selectively involve the solvent penetration into the polymeric device, the swelling of the polymer, the polymer erosion and the drug diffusion out of the device but all share two common key features. The first is that the solvent penetration into the polymer causes the transition of the polymer from a glassy state into a rubbery state. The interface between the two states of the polymer is modelled as a moving boundary and the speed of this interface is governed by a kinetic law. The second feature is that drug diffusion only happens in the rubbery region of the polymer, with a nonlinear diffusion coefficient which is dependent on the concentration of solvent. These models are analysed by using both formal asymptotics and numerical computation, where front-fixing methods and the method of lines with finite difference approximations are used to solve these models numerically. This numerical scheme is conservative, accurate and easily implemented to the moving boundary problems and is thoroughly explained in Section 3.2. From the small time asymptotic analysis in Sections 5.3.1, 6.3.1 and 7.2.1, these models exhibit the non-Fickian behaviour referred to as Case II diffusion, and an initial constant rate of drug release which is appealing to the pharmaceutical industry because this indicates zeroorder release. The numerical results of the models qualitatively confirms the experimental behaviour identified in the literature. The knowledge obtained from investigating these models can help to develop more complex multi-layered drug delivery devices in order to achieve sophisticated drug release profiles. A multi-layer matrix tablet, which consists of a number of polymer layers designed to provide sustainable and constant drug release or bimodal drug release, is also discussed in this research. The moving boundary problem describing the solvent penetration into the polymer also arises in melting and freezing problems which have been modelled as the classical onephase Stefan problem. The classical one-phase Stefan problem has unrealistic singularities existed in the problem at the complete melting time. Hence we investigate the effect of including the kinetic undercooling to the melting problem and this problem is called the one-phase Stefan problem with kinetic undercooling. Interestingly we discover the unrealistic singularities existed in the classical one-phase Stefan problem at the complete melting time are regularised and also find out the small time behaviour of the one-phase Stefan problem with kinetic undercooling is different to the classical one-phase Stefan problem from the small time asymptotic analysis in Section 3.3. In the case of melting very small particles, it is known that surface tension effects are important. The effect of including the surface tension to the melting problem for nanoparticles (no kinetic undercooling) has been investigated in the past, however the one-phase Stefan problem with surface tension exhibits finite-time blow-up. Therefore we investigate the effect of including both the surface tension and kinetic undercooling to the melting problem for nanoparticles and find out the the solution continues to exist until complete melting. The investigation of including kinetic undercooling and surface tension to the melting problems reveals more insight into the regularisations of unphysical singularities in the classical one-phase Stefan problem. This investigation gives a better understanding of melting a particle, and contributes to the current body of knowledge related to melting and freezing due to heat conduction.

Course experiences, satisfaction and career intent of final year pre-registration Australian pharmacy students

Background In Australia, the profession of pharmacy has undergone many changes to adapt to the needs of the community. In recent years, concerns have been raised with evidence emerging of workforce saturation in traditional pharmacy practice sectors. It is not known how current final year pharmacy students’ perceive the different pharmacy career paths in this changing environment. Hence investigating students’ current experiences with their pharmacy course, interaction with the profession and developing an understanding of their career intentions would be an important step, as these students would make up a large proportion of future pharmacy workforce Objective The objective of this study was thus to investigate final year students’ career perspectives and the reasons for choosing pharmacy, satisfaction with this choice of pharmacy as a tertiary course and a possible future career, factors affecting satisfaction and intention of future career paths. Methods A quantitative cross sectional survey of final year students from 3 Australian universities followed by a qualitative semi-structured interview of a convenience sample of final year students from the University of Sydney. Results ‘Interest in health and medicine’ was the most important reason for choosing pharmacy (n=238). The majority of students were ‘somewhat satisfied’ with the choice of pharmacy (35.7%) as a course and possible future career. Positive associations were found between satisfaction and reasons for joining pharmacy such as ‘felt pharmacy is a good profession’ (p=0.003) while negative associations included ‘joined pharmacy as a gateway to medicine or dentistry’ (p=0.001). Quantitate and qualitative results showed the most frequent perception of community pharmacy was ‘changing’ while hospital and pharmaceutical industry was described as ‘competitive’ and ‘research’ respectively. The highest career intention was community followed by hospital pharmacy. Conclusion Complex factors including university experiences are involved in shaping students’ satisfaction and perception of career. This may relate to challenges in the community pharmacy sector, job opportunities in hospital and limited understanding of the pharmaceutical industry. The results offer insight for the profession in terms of entry into various roles and also to pharmacy educators for their roles in shaping curricula and placement experiences that attract future graduates to defined career pathways in pharmacy.

Is Australia ready for biosimilars?

The biosimilars market is potentially the single fastest growing pharmaceutical sector with an estimated worth of US$67bn in global sales by 2020. This market generally refers to larger molecule, biological, protein-based pharmaceuticals which have lost its patent. This has stimulated the emergence of non-conventional pharmaceutical investors such as Fujifilm and Samsung as well as host countries such as Brazil, Mexico, China, India, South Korea, Turkey and Russia, which view biosimilars as a key macroeconomic driver of growth. Internationally, the European Medicines Agency has led the regulation of the quality, safety and efficacy of biosimilars; however, many countries have developed their own biosimilar regulatory frameworks. Despite the similarity of these with European guidelines, differences do exist across jurisdictions and have implications for cross-jurisdictional registration and regulation. The consideration of biosimilar regulation, however, demands attention beyond quality, safety and efficacy. The potential implications of extended patent protection, international trade and globalisation require a congruent policy approach to their regulation. Notwithstanding the fact that Australia is a relatively small pharmaceutical market and that there are only 14 biosimilar products currently approved for use, Australia’s geographical proximity to pharm-emerging countries and its trade relation with the major pharmaceutical markets have positioned Australia in a unique position to influence international development and regulation of biosimilars. Australia’s National Medicines Policy (2000) potentially provides the foundation for a partnership approach to biosimilar regulation, minimise duplication of regulatory efforts while at the same time fostering a viable pharmaceutical industry.

Distribution of methylene chloride in human blood

Methylene chloride (dichloromethane) is widely used as a solvent for stripping of paint, as industrial cleaning agent, for coating of pills in the pharmaceutical industry, and in the decaffeination of coffee. There is “sufficient evidence for the carcinogenicity” of methylene chloride in animals and “inadequate evidence for its carcinogenity in humans”, according to IARC (IARC 1987; CEC 1990).

Bioprocess engineering of microalgae to produce a variety of consumer products

Microalgae biotechnology has recently emerged into the lime light owing to numerous consumer products that can be harnessed from microalgae. Product portfolio stretches from straightforward biomass production for food and animal feed to valuable products extracted from microalgal biomass, including triglycerides which can be converted into biodiesel. For most of these applications, the production process is moderately economically viable and the market is developing. Considering the enormous biodiversity of microalgae and recent developments in genetic and metabolic engineering, this group of organisms represents one of the most promising sources for new products and applications. With the development of detailed culture and screening techniques, microalgal biotechnology can meet the high demands of food, energy and pharmaceutical industries. This review article discusses the technology and production platforms for development and creation of different valuable consumer products from microalgal biomass.

Julia Gillard, Big Pharma, patent law and public health

It takes a lot of bravery for governments to stand up to big business. But the Gillard government has shown a lot of guts during its tenure. It stood up to Big Tobacco in the battle over plain packaging of tobacco products and has defended individuals and families affected by asbestos. It took on Big Oil in its Clean Energy Future reforms and stood up to the resource barons with the mining tax. The government is now considering Big Pharma - the pharmaceutical industry and their patents – and has launched several inquiries into patent law and pharmaceutical drugs...

Process Analytical Technology Approach on Fluid Bed Granulation and Drying : Identifying Critical Relationships and Constructing the Design Space

Fluid bed granulation is a key pharmaceutical process which improves many of the powder properties for tablet compression. Dry mixing, wetting and drying phases are included in the fluid bed granulation process. Granules of high quality can be obtained by understanding and controlling the critical process parameters by timely measurements. Physical process measurements and particle size data of a fluid bed granulator that are analysed in an integrated manner are included in process analytical technologies (PAT). Recent regulatory guidelines strongly encourage the pharmaceutical industry to apply scientific and risk management approaches to the development of a product and its manufacturing process. The aim of this study was to utilise PAT tools to increase the process understanding of fluid bed granulation and drying. Inlet air humidity levels and granulation liquid feed affect powder moisture during fluid bed granulation. Moisture influences on many process, granule and tablet qualities. The approach in this thesis was to identify sources of variation that are mainly related to moisture. The aim was to determine correlations and relationships, and utilise the PAT and design space concepts for the fluid bed granulation and drying. Monitoring the material behaviour in a fluidised bed has traditionally relied on the observational ability and experience of an operator. There has been a lack of good criteria for characterising material behaviour during spraying and drying phases, even though the entire performance of a process and end product quality are dependent on it. The granules were produced in an instrumented bench-scale Glatt WSG5 fluid bed granulator. The effect of inlet air humidity and granulation liquid feed on the temperature measurements at different locations of a fluid bed granulator system were determined. This revealed dynamic changes in the measurements and enabled finding the most optimal sites for process control. The moisture originating from the granulation liquid and inlet air affected the temperature of the mass and pressure difference over granules. Moreover, the effects of inlet air humidity and granulation liquid feed rate on granule size were evaluated and compensatory techniques used to optimize particle size. Various end-point indication techniques of drying were compared. The ∆T method, which is based on thermodynamic principles, eliminated the effects of humidity variations and resulted in the most precise estimation of the drying end-point. The influence of fluidisation behaviour on drying end-point detection was determined. The feasibility of the ∆T method and thus the similarities of end-point moisture contents were found to be dependent on the variation in fluidisation between manufacturing batches. A novel parameter that describes behaviour of material in a fluid bed was developed. Flow rate of the process air and turbine fan speed were used to calculate this parameter and it was compared to the fluidisation behaviour and the particle size results. The design space process trajectories for smooth fluidisation based on the fluidisation parameters were determined. With this design space it is possible to avoid excessive fluidisation and improper fluidisation and bed collapse. Furthermore, various process phenomena and failure modes were observed with the in-line particle size analyser. Both rapid increase and a decrease in granule size could be monitored in a timely manner. The fluidisation parameter and the pressure difference over filters were also discovered to express particle size when the granules had been formed. The various physical parameters evaluated in this thesis give valuable information of fluid bed process performance and increase the process understanding.

Characterisation and processing of amorphous binary mixtures with low glass transition temperature

The number of drug substances in formulation development in the pharmaceutical industry is increasing. Some of these are amorphous drugs and have glass transition below ambient temperature, and thus they are usually difficult to formulate and handle. One reason for this is the reduced viscosity, related to the stickiness of the drug, that makes them complicated to handle in unit operations. Thus, the aim in this thesis was to develop a new processing method for a sticky amorphous model material. Furthermore, model materials were characterised before and after formulation, using several characterisation methods, to understand more precisely the prerequisites for physical stability of amorphous state against crystallisation. The model materials used were monoclinic paracetamol and citric acid anhydrate. Amorphous materials were prepared by melt quenching or by ethanol evaporation methods. The melt blends were found to have slightly higher viscosity than the ethanol evaporated materials. However, melt produced materials crystallised more easily upon consecutive shearing than ethanol evaporated materials. The only material that did not crystallise during shearing was a 50/50 (w/w, %) blend regardless of the preparation method and it was physically stable at least two years in dry conditions. Shearing at varying temperatures was established to measure the physical stability of amorphous materials in processing and storage conditions. The actual physical stability of the blends was better than the pure amorphous materials at ambient temperature. Molecular mobility was not related to the physical stability of the amorphous blends, observed as crystallisation. Molecular mobility of the 50/50 blend derived from a spectral linewidth as a function of temperature using solid state NMR correlated better with the molecular mobility derived from a rheometer than that of differential scanning calorimetry data. Based on the results obtained, the effect of molecular interactions, thermodynamic driving force and miscibility of the blends are discussed as the key factors to stabilise the blends. The stickiness was found to be affected glass transition and viscosity. Ultrasound extrusion and cutting were successfully tested to increase the processability of sticky material. Furthermore, it was found to be possible to process the physically stable 50/50 blend in a supercooled liquid state instead of a glassy state. The method was not found to accelerate the crystallisation. This may open up new possibilities to process amorphous materials that are otherwise impossible to manufacture into solid dosage forms.

Jauheiden erottuminen

Partikkelisysteemien segregaatio eli erottuminen on ilmiö, jossa tasalaatuisen jauheseoksen komponenteilla on taipumus erota toisistaan. Jauheen erottumistaipumus riippuu partikkelien ominaisuuksista, ympäröivistä olosuhteista ja partikkelien välisistä vuorovaikutuksista. Segregaatiomekanismeja on esitetty kirjallisuudessa valtava määrä ja pienetkin erot partikkelien välisissä ominaisuuksissa ja vuorovaikutuksissa voivat johtaa täysin eri segregaatiomekanismeihin. Segregaatioilmiö on lääketeollisuuden näkökulmasta hyvin keskeinen, eikä sitä tunneta vielä riittävän hyvin, jotta siltä osattaisiin systemaattisesti välttyä. Nykyinen segregaatiotutkimus perustuu suurelta osin yrityksen ja erehdyksen kautta tapahtuvaan oppimiseen. Todellisen segregaatioilmiön ymmärtämiseen tarvittaisiin innovatiivisia tutkimusmenetelmiä. Kokeellisen osan tarkoituksena oli kehittää ja perustestata menetelmä, jolla voidaan tutkia erilaisten partikkelisysteemien erottumiskäyttäytymistä, ja käyttää tätä menetelmää farmaseuttisten rae- ja pellettiseosten segregaation tutkimiseen. Tavoitteena oli todistaa kehitetyn Babel-laitteen toimintaperiaatteen soveltuvuus partikkelisysteemien erottumiskäyttäytymisen tutkimiseen, mutta suoritetut kokeet olivat lähinnä menetelmän ja laitteen testausta. Ongelmiksi muodostuivat Babel-laitteen asettamat rajoitukset, partikkelien sähköistyminen ja partikkelien väliset vuorovaikutukset. Käytetyt suoraviivaiset lähestymistavat eivät riittäneet segregaation aiheuttamiseen Babel-laitteella. Vertikaalisen ravistelun seurauksena syntynyt konvektiopyörre esti segregaation syntymisen. Johtopäätöksenä voidaan sanoa, että Babel-laite mittaa hyvin ja toistettavasti sekä se kykenee erottamaan erikokoiset partikkelit ja erilaiset kokojakaumat toisistaan. Laitteen kehittämistavoitteena olisi saada segregaatio paremmin näkyviin jauheseoksissa ravistelun seurauksena. Tällöin voitaisiin tehdä päätelmiä jauheseoksen erottumistaipumuksesta ja systeemissä vallitsevista erottumismekanismeista. Laitteen ja menetelmän jatkokehittäminen voisi tuottaa hyödyllistä lisätietoa, mikä edesauttaisi segregaation ymmärtämistä ilmiönä entistä paremmin

Lewis Acid-Lewis Base Mediated Metal-Free Hydrogen Activation and Catalytic Hydrogenation

Organocatalysis, the use of organic molecules as catalysts, is attracting increasing attention as one of the most modern and rapidly growing areas of organic chemistry, with countless research groups in both academia and the pharmaceutical industry around the world working on this subject. The literature review of this thesis mainly focuses on metal-free systems for hydrogen activation and organocatalytic reduction. Since these research topics are relatively new, the literature review also highlights the basic principles of the use of Lewis acid-Lewis base pairs, which do not react irreversibly with each other, as a trap for small molecules. The experimental section progresses from the first observation of the facile heterolytical cleavage of hydrogen gas by amines and B(C6F5)3 to highly active non-metal catalysts for both enantioselective and racemic hydrogenation of unsaturated nitrogen-containing compounds. Moreover, detailed studies of structure-reactivity relationships of these systems by X-ray, neutron diffraction, NMR methods and quantum chemical calculations were performed to gain further insight into the mechanism of hydrogen activation and hydrogenation by boron-nitrogen compounds.