Obtenção de biopeptídeos com atividade antioxidante a partir de proteínas de origem animal

Pele, ossos, espinhas, entre outros, separados durante o processamento de produtos cárneos podem ser uma boa fonte de proteína, especialmente de colágeno. Para obtenção de colágeno nativo a partir de ossos é necessário um tratamento prévio de desproteinização e desmineralização. Portanto, o objetivo deste trabalho foi determinar os melhores parâmetros para a desmineralização de ossos de pescado e frango utilizando soluções de HCl e EDTA um complexante de íons metálicos. O melhor efeito da desmineralização foi obtido com solução de HCl 1,0 mol/L. Após 48 h de extração, 99,4 e 95,4% das substâncias minerais foram solubilizadas para os ossos de pescado e para ossos de frango, respectivamente. Paralelamente, a menor perda de colágeno também foi observada nessas condições. O processo realizado empregando soluções de EDTA foi menos eficaz do que com solução de HCl. Após 48 h de extração com EDTA 0,1 mol/L, 37,5 e 32,4% dos compostos minerais foram removidos dos ossos de pescado e dos ossos de frango, respectivamente. Uma maior eficiência foi alcançada com solução de EDTA 0,5 mol/L. O rendimento do processo foi de cerca de 66,6% a partir dos ossos de pescado e 70,6% a partir os ossos de frango. A desmineralização com EDTA não provocou perda de colágeno.

ABUNDÂNCIA NATURAL DE 15N E FORMAS DE NITROGÊNIO EM ARGISSOLO CULTIVADO COM EUCALIPTO E ACÁCIA

O nitrogênio e um dos nutrientes mais demandados pelas espécies vegetais, sua presença no solo, sob formas orgânicas ou minerais disponíveis para as plantas, está vinculada à qualidade e quantidade dos resíduos vegetais aportados ao solo. O estudo teve o objetivo de avaliar a influência do cultivo do eucalipto e da acácia na composição das formas orgânicas e inorgânicas de N e, na abundância natural de 15N em um Argissolo Amarelo. Para isso, foram coletadas amostras de solo e serapilheira em monocultivos do Eucalyptus urograndis (clone do Eucalyptus urophylla S. T. Blake x Eucalyptus grandis W. Hill ex Spreng) de ciclo curto (sete anos), sistemas de cultivo de rotação com acácia ( Acacia mangium Willd.) após monocultivo de eucalipto, monocultivo de eucalipto de ciclo longo (24 anos) e mata nativa (Mata Atlântica) como condição original de solo do litoral Norte do Espírito do Santo. Foram avaliados os teores de C orgânico total, N total, N-NH4+, N-NO3-, relação C/N, fracionamento do N orgânico e abundância natural de 15N no solo e serapilheira. Das formas de N-orgânico hidrolisado, o N-amino foi a fração que apresentou maior contribuição (39%), seguida pela fração de N-não identificado (27%), da fração N-amida (18%) e N-hexosamina (15%). O povoamento de acácia promoveu menor abundância natural de 15N e maiores teores de N total e C orgânico no solo e aumentou as formas orgânicas de N-hidrolisado, quando comparado àqueles de eucalipto de ciclo curto. Isso indica o aumento de formas lábeis de N orgânico no solo para as plantas e redução da humificação da matéria orgânica do solo (MOS) de acácia. Nesse sentido, a rotação de cultivos florestais com acácia após eucalipto de ciclo curto contribuiu para o aumento de formas orgânicas no solo, importantes para a nutrição de plantas, por serem potenciais fontes de nutrientes às plantas em curto período de tempo.

Adsorção de corantes têxteis aniônicos e catiônicos em resíduos do processamento de fios de algodão modificados quimicamente

The textile industry generates a large volume of high organic effluent loading whoseintense color arises from residual dyes. Due to the environmental implications caused by this category of contaminant there is a permanent search for methods to remove these compounds from industrial waste waters. The adsorption alternative is one of the most efficient ways for such a purpose of sequestering/remediation and the use of inexpensive materials such as agricultural residues (e.g., sugarcane bagasse) and cotton dust waste (CDW) from weaving in their natural or chemically modified forms. The inclusion of quaternary amino groups (DEAE+) and methylcarboxylic (CM-) in the CDW cellulosic structure generates an ion exchange capacity in these formerly inert matrix and, consequently, consolidates its ability for electrovalent adsorption of residual textile dyes. The obtained ionic matrices were evaluated for pHpcz, the retention efficiency for various textile dyes in different experimental conditions, such as initial concentration , temperature, contact time in order to determine the kinetic and thermodynamic parameters of adsorption in batch, turning comprehensive how does occur the process, then understood from the respective isotherms. It was observed a change in the pHpcz for CM--CDW (6.07) and DEAE+-CDW (9.66) as compared to the native CDW (6.46), confirming changes in the total surface charge. The ionized matrices were effective for removing all evaluated pure or residual textile dyes under various tested experimental conditions. The kinetics of the adsorption process data had best fitted to the model a pseudosecond order and an intraparticle diffusion model suggested that the process takes place in more than one step. The time required for the system to reach equilibrium varied according to the initial concentration of dye, being faster in diluted solutions. The isotherm model of Langmuir was the best fit to the experimental data. The maximum adsorption capacity varied differently for each tested dye and it is closely related to the interaction adsorbent/adsorbate and dye chemical structure. Few dyes obtained a linear variation of the balance ka constant due to the inversion of temperature and might have influence form their thermodynamic behavior. Dyes that could be evaluated such as BR 18: 1 and AzL, showed features of an endothermic adsorption process (ΔH° positive) and the dye VmL presented exothermic process characteristics (ΔH° negative). ΔG° values suggested that adsorption occurred spontaneously, except for the BY 28 dye, and the values of ΔH° indicated that adsorption occurred by a chemisorption process. The reduction of 31 to 51% in the biodegradability of the matrix after the dye adsorption means that they must go through a cleaning process before being discarded or recycled, and the regeneration test indicates that matrices can be reused up to five times without loss of performance. The DEAE+-CDW matrix was efficient for the removal of color from a real textile effluent reaching an UV-Visible spectral area decrease of 93% when applied in a proportion of 15 g ion exchanger matrix L-1 of colored wastewater, even in the case of the parallel presence of 50 g L-1 of mordant salts in the waste water. The wide range of colored matter removal by the synthesized matrices varied from 40.27 to 98.65 mg g-1 of ionized matrix, obviously depending in each particular chemical structure of the dye upon adsorption.

Isolamento de uma quitinase extraída do cefalotórax do camarão marinho Litopenaeus schmitti (BURKENROAD, 1936) : avaliação de suas atividades antimicrobiana e larvicida

Chitinases are enzymes involved in degradation of chitin and are present in a range of organisms, including those that do not contain chitin, such as bacteria, viruses, plants and animals, and play important physiological and ecological roles. Chitin is hydrolyzed by a chitinolytic system classified as: endo-chitinases, exo-chitinases and N-acetyl-b-D-glucosaminidases. In this study a Litochitinase1 extracted from the cephalotorax of the shrimp Litopenaeus Schmitt was purified 987.32 times using ionexchange chromatography DEAE-Biogel and molecular exclusion Sephacryl S-200. These enzyme presented a molecular mass of about 28.5 kDa. The results, after kinetic assay with the Litochitinase1 using as substrate p-nitrophenyl-N-acetyl-b-Dglucosaminideo, showed apparent Km of 0.51 mM, optimal activity at pH ranging from 5.0 to 6.0, optimum temperature at 55°C and stability when pre-incubated at temperatures of 25, 37, 45, 50 and 55°C. The enzyme showed a range of stability at pH 4.0 to 5.5. HgCl2 inhibited Litochitinase1 while MgCl2 enhances its activity. Antimicrobial tests showed that Litochitinase1 present activity against gram-negative bacterium Escherichia coli in the 800 μg/mL concentration. The larvicidal activity against Aedes aegypti was investigated using crude extracts, F-III (50-80%) and Litochitinase1 at 24 and 48 hours. The results showed larvicidal activity in all these samples with EC50 values of 6.59 mg/mL for crude extract, 5.36 mg/mL for F-III and 0.71 mg/mL for Litochitinase1 at 24 hours and 3.22 and 0.49 mg/mL for the F-III and Litochitinase1 at 48 hours, respectively. Other experiments confirmed the presence of chitin in the midgut of Aedes aegypti larvae, which may be suffering the action of Litochitinase1 killing the larvae, but also the absence of contaminating proteins as serine proteinase inhibitors and lectins in the crude extract, F-III and Litochitinase1, indicating that the death of the larvae is by action of the Litochitinase1. We also observed that the enzymes extracted from intestinal homogenate of the larvae no have activity on Litochitinase1. These results indicate that the enzyme can be used as an alternative to control of infections caused by Escherichia coli and reducing the infestation of the mosquito vector of dengue.

Biossorção do corante têxtil preto reafix super 2R com bagaço de malte

Na indústria têxtil grandes volumes de efluentes são gerados, os quais são caracterizados por serem coloridos e poluentes , devido à presença de corantes em sua composição. Com a necessidade de descontaminação, diferentes métodos são utilizados no tratamento, sendo um deles, a biossorção. Este consiste na remoção das substâncias tóxicas recorrendo a biossorventes obtidos a partir de resíduos agrícolas e sub-produtos de processos industriais. O objetivo principal deste trabalho foi estudar a remoção do corante Preto Reafix Super 2R em soluções aquosas por meio de biossorção com bagaço de malte. Baseando-se sobretudo no estudo da cinética e equilíbrio entre o biossorvente e o corante. Numa primeira fase foi estudada a influência dos parâmetros operacionais, como a influência do diâmetro médio das partículas do biossorvente, o pH da solução e a velocidade de agitação da solução. Sendo as condições ótimas de biossorção definidas a pH 2, velocidade de agitação de 150 rpm e biomassa sem peneiramento. Posteriormente, ajustaram-se os modelos cinéticos de Pseudo-primeira ordem, Pseudo-segunda ordem e de Difusão intrapartícula aos resultados experimentais obtidos pela cinética de adsorção avaliando também a influência da temperatura no tempo de contato para se alcançar o equilibrio. O modelo de Pseudo-segunda ordem conduziu ao melhor ajuste, com um coeficiente de correlação (R2) de apróximadamente 1. A partir dos testes de equilíbrio realizados com diferentes concentrações de corante, foram ajustadas as isotermas de Langmuir, Freundlich, Tempkin aos resultados experimentais tendo-se obtido parâmetros bastante significativos para o modelo Langmuir, cuja capacidade máxima de remoção (qmax) obtida foi de 40,16 mg.g-1. A análise dos parâmetros termodinâmicos permitiram avaliar que o processo de adsorção ocorre espontaneamente, sendo endotérmico e que ao longo do processo aumenta a aleatoriedade na interface sólido/solução, devido à desorganização do processo em virtude das interações que ocorrem.

Valorization of the Macroalgae Sargassum Muticum by Enzymatic Hydrolysis, Interest of Surfactants to Improve the Extraction of Phlorotannins and Polysaccharides

The use of surfactants to improve enzymatic hydrolysis of the macroalgae Sargassum muticum has been investigated. Visible absorption spectroscopy has been used to quantify the solubilization of both polysaccharides and phlorotannins in the hydrolysates.   After total extraction, results showed that Sargassum muticum contained 2.74% (expressed in percent of the dry weight of the algae) of phlorotannins whose 32 % were in the cell wall. This result shows that it is important to access to the parietal phlorotannins. To reach this objective, we chose the enzymatic approach for destructurating the cell wall of the algae. The use of 5% dry weight (DW - 5% by weight of hydrolyzed algae) of an enzymatic mix containing a commercial beta-glucanase, a commercial protease and an alginate lyase extracted from Pseudomonas alginovora led after 3 hours of hydrolysis to the solubilization of 2.43% DW polysaccharides and 0.52% DW phlorotannins. The use of 0.5% volume of the surfactant Triton® X-100 with 10% DW of the enzymatic mix has allowed to reaching the value of 2.63% DW of solubilized phlorotannins, that is 96% of the total phenolic content.   The use of non-ionic surfactant, combined to enzymatic hydrolysis, showed an increased efficiency in disrupting cell wall and solubilizing phlorotannins in Sargassum muticum.

Adição do resíduo de biomassa da cana-de-açúcar em pastas para cimentação de poços petrolíferos produtores de óleos pesados

The Potiguar basin has large fields of viscous oil where the used method for recovering is based on vapor injection; this operation is carried out by injecting vapor in the oilwell directly, without the protection of a revetment through thermal insulation, what causes its dilation and, consequently, cracks in the cement placed on the annular, and lost of hydraulic insulation; this crack is occasioned by the phenomenon of retrogression of the compressive resistance due to the conversion of the hydrated calcium silicate in phases calcium-rich, caused by the high temperatures in the wells, subjected to thermal recuperation. This work has evaluated the application of composite pastes with addition of residue of biomass of ground sugar-cane bagasse as anti-retrogression mineral admixture for cementation of oil-wells subjected to thermal recuperation. The addition of the mineral residue was carried out considering a relative amount of 10, 20, 30, 40 and 59% in relation to cement mass, trying to improve the microstructure of the paste, still being developed a reference paste only with cement and a paste with addition of 40% of silica flour - renowned material in the oil industry as anti-retrogression additive. Pozzolanic activity of the ash was evaluated through XRD, TG/DTG, as the resistance to compression, and it was also determined the physical and mechanical behavior of the pastes when submitted to cure at low temperatures (22 and 38º C); besides it was evaluated the behavior of the pastes when submitted to two cycles of cure at high temperature (280ºC) and pressure (7 MPa). It was verified that the ash of the sugar-cane biomass presents pozzolanic reaction and has great efficiency in decrease the permeability of the paste by filler effect, as well as that addition of ash in a relative amount of 10, 20 e 30% increases cured compressive resistance at low temperatures. It was also showed that the ash in a relative amount of 40% and 59% has very significant efficiency as anti-retrogression additive, since it prevents the decrease of compressive resistance and forms hydrated calcium silicate type xenotlita and tobermorita which have more resistance and stability in high temperatures

Evaluation of hemosponge in promoting dental socket healing after 3rd mandibular premolar extraction in a feline model

Aim: To investigate the healing process following use of collagen sponges in the dental socket after extraction. Wound complications during the study were also evaluated. Methods: 32 cats were included in this study. IV administration of the combination of diazepam (0.22 mg/kg) and ketamine (10 mg/kg) was used to induce general anesthesia. Surgical extraction of both 3rd mandibular premolars was performed. The open dental sockets were divided in two groups. In Group A, the open dental socket on the left side was closed using 4-0 Monocryl in simple interrupted pattern. In Group B, the right dental socket was filled with lyophilized hydrolyzed collagen and the buccal and lingual flaps were sutured using 4-0 Monocryl and simple interrupted pattern. Meloxicam (0.2 mg/kg) was used to manage the post-extraction pain in all cats. Ampicilline 20 mg/kg was used as prophylaxis. The wounds were observed during the study to evaluate any signs of inflammation or dehiscence. Radiographs were taken to compare healing of the socket 3 weeks after the procedure. A 1 mm biopsy punch sample was taken from sockets in all cats for comparison of the healing in both groups. Results: Hemorrhage occurred only in the sockets of Group A. Remission of radiolucent area occurred in both groups. Mean score of inflammation was lower and mean scores of fibrotic reaction and fibroplasia were higher in Group B (p<0.05). Conclusions: Use of hemosponge in alveolar socket may accelerate fibroplasia and formation of the connective tissue and reduce inflammation after tooth extraction. Therefore, post-extraction use of the hemostatic agent in the dental socket is recommended.

Optimización del pelado de maíz con cal a utilizarse como estrategia de descontaminación de fumonisinas

Objetivo: En este estudio, el proceso de pelado de maíz con cal(PPC) fue documentado y sus parámetros optimizados mediante un diseño experimental, con el fin de conseguir un pelado completo del maíz con el mínimo grado de contaminación con fumonisinas. La presencia de fumonisina B1 (FB1) en el maíz fue analizada mediante HPLC-RP-FLD. Metodología: Los experimentos se realizaron a partir de un lote de maíz en grano seco conformado por submuestras provistas por agricultores seleccionados del cantón Nabón de la provincia del Azuay en base a un trabajo de investigación previo realizado por el proyecto VLIR-IUC, “Nutrición, Alimentación y Salud”. El diseño experimental fue divido en tres etapas: la caracterización de proceso, el mismo que se realizó mediante encuestas y observaciones in situ; pruebas de agotamiento de cal para el PPC, las que se realizaron partiendo de los datos recogidos en la primera etapa, y las pruebas de evaluación del PPC en la reducción de fumonisinas B1. Resultados y conclusiones: Se observó que, independiente de la concentración de cal utilizada, la etapa de pelado produjo una reducción de 8.73 veces la concentración de FB1 del maíz crudo (P=0.030), y que el maíz pelado y cocinado presentó una reducción de 9.14 veces (P=0.019). Recomendaciones: Se recomienda continuar con la experimentación para elucidar si la reducción de FB1se debió al proceso mecánico de remoción de la cáscara, o a la transformación química en su forma hidrolizada, por lo que este trabajo podría considerarse como un estudio explorativo preliminar.

Influência da adição de cinza do bagaço de cana calcinada em sistemas de pastas para cimentação de poços petrolíferos

Cementing operation is one of the most important stages in the oil well drilling processes and has main function to form hydraulic seal between the various permeable zones traversed by the well. However, several problems may occur with the cement sheath, either during primary cementing or during the well production period. Cements low resistance can cause fissures in the cement sheath and compromise the mechanical integrity of the annular, resulting in contamination of groundwater and producing zones. Several researches show that biomass ash, in particular, those generated by the sugarcane industry have pozzolanic activity and can be added in the composition of the cementing slurries in diverse applications, providing improvements in mechanical properties, revenue and cement durability. Due to the importance of a low cost additive that increases the mechanical properties in a well cementing operations, this study aimed to potentiate the use of sugarcane bagasse ash as pozzolanic material, evaluate the mechanisms of action of this one on cement pastes properties and apply this material in systems slurries aimed to cementing a well with 800 m depth and geothermal gradient of 1.7 °F/100 ft, as much primary cementing operations as squeeze. To do this, the ash beneficiation methods were realized through the processes of grinding, sifting and reburning (calcination) and then characterization by X-ray fluorescence, XRD, TG / DTG, specific surface area, particle size distribution by laser diffraction and mass specific. Moreover, the ash pozzolanic activity added to the cement at concentrations of 0%, 20% and 40% BWOC was evaluated by pozzolanic activity index with lime and with Portland cement. The evaluation of the pozzolanic activity by XRD, TG / DTG and compressive strength confirmed the ash reactivity and indicated that the addition of 20% in the composition of cement slurries produces improvement 34% in the mechanical properties of the slurry cured. Cement slurries properties evaluated by rheological measurements, fluid loss, free fluid, slurry sedimentation, thickening time and sonic strength (UCA) were satisfactory and showed the viability of using the sugarcane ash in cement slurries composition for well cementing

Digestibilidade Aparente de Ingredientes pela Tilápia do Nilo (Oreochromis niloticus)

Avaliou-se a digestibilidade aparente do milho, amido de milho, milho extrusado, germe de milho, sorgo, farelo de trigo, farelo de arroz, glúten 21, glúten 60, farelo de soja, farelo de canola, farelo de algodão, farinha de peixe, farinha de carne, farinha de vísceras de aves, farinha de sangue e farinha de penas. Confeccionaram-se 18 rações, marcadas com 0,10% de óxido de crômio III, uma delas, basal purificada, e as demais, contendo os ingredientes. Os peixes, 100 juvenis com 100±10 g, foram alojados em cinco tanques-rede para facilitar o manejo de alimentação e a coleta de fezes e permaneceram, durante o dia, em cinco aquários (250 L) de alimentação, recebendo refeições à vontade das 8 às 17h30. Após, foram transferidos para cinco aquários (300 L) de coleta de fezes, onde permaneceram até a manhã do dia subseqüente. O coeficiente de digestibilidade aparente dos ingredientes foi calculado com base no teor de óxido crômio da ração e das fezes. Com base nos resultados, concluiu-se que, entre os ingredientes energéticos, o milho apresentou o melhor coeficiente de digestibilidade aparente, seguindo-se o milho extrusado, o farelo de trigo e o farelo de arroz; dos ingredientes protéicos - vegetal, o glúten 60 e o glúten 21, seguidos do farelo de canola, apresentou os melhores coeficientes e dos protéicos - animal, destacou-se a farinha de vísceras de aves, seguida da farinha de peixes, enquanto os piores coeficientes foram proporcionados pela farinha de penas e farinha de sangue.

High-performance supercapacitor electrode from cellulose-derived, inter-bonded carbon nanofibers

Carbon nanofibers with inter-bonded fibrous structure show high supercapacitor performance when being used as electrode materials. Their preparation is highly desirable from cellulose through a pyrolysis technique, because cellulose is an abundant, low cost natural material and its carbonization does not emit toxic substance. However, interconnected carbon nanofibers prepared from electrospun cellulose nanofibers and their capacitive behaviors have not been reported in the research literature. Here we report a facile one-step strategy to prepare inter-bonded carbon nanofibers from partially hydrolyzed cellulose acetate nanofibers, for making high-performance supercapacitors as electrode materials. The inter-fiber connection shows considerable improvement in electrode electrochemical performances. The supercapacitor electrode has a specific capacitance of ∼241.4 F g-1 at 1 A g-1 current density. It maintains high cycling stability (negligible 0.1% capacitance reduction after 10,000 cycles) with a maximum power density of ∼84.1 kW kg-1. They may find applications in the development of efficient supercapacitor electrodes for energy storage applications.

A novel α-aminophosphonic acid-modified acrylamide-based hydrophobic associating copolymer with superb water solubility for enhanced oil recovery

As a non-renewable resource, the rational exploitation of oil has attracted a large amount of attention. Among many methods for enhanced oil recovery, polymer flooding is the most suitable method of chemical flooding for non-marine reservoirs and therefore various modified acrylamide-based copolymers have been studied. In this study, a novel α-aminophosphonic acid-modified hydrophobic associating copolymer was successfully synthesized by copolymerization of acrylamide, acrylic acid, N-allyldodecanamide and 1-(dimethylamino)allylphosphonic acid. The copolymer was characterized by FT-IR, 1H NMR and thermogravimetry and exhibited superior water solubility and thickening capability. Subsequently, the shear resistance, temperature resistance and salt tolerance of the copolymer solution were investigated. The value of apparent viscosity retention of a 2000 mg L-1 copolymer solution was as high as 58.55 mPa s at a shear rate of 170 s-1 and remained at 40.20 mPa s at 120 °C. The values of apparent viscosity retention of 55.41 mPa s, 59.95 mPa s and 52.97 mPa s were observed in solutions of 10000 mg L-1 NaCl, 1200 mg L-1 MgCl2, and 1200 mg L-1 CaCl2, respectively. These were better than those of partially hydrolyzed polyacrylamide under the same conditions. In addition, an increase of up to 14.52% in the oil recovery rate compared with that for water flooding could be achieved in a core flooding test using a 2000 mg L-1 copolymer solution at 65 °C.