Aspects of the biology of Mya arenaria and Ensis spp. (Mollusca; Bivalvia) in the Irish Sea and adjacent areas

This study was undertaken to investigate the general biology, including the reproductive cycle and health status, of two clam taxa in Irish waters, with particular reference to the Irish Sea area. Monthly samples of the soft shell clam, Mya arenaria, were collected from Bannow Bay, Co. Wexford, Ireland, for sixteen months, and of the razor clam, Ensis spp. from the Skerries region (Irish Sea) between June 2010 and September 2011. In 2010, M. arenaria in Bannow Bay matured over the summer months, with both sexes either ripe or spawning by August. The gonads of both sexes of E. siliqua developed over autumn and winter 2010, with the first spawning individuals being recorded in January 2011. Two unusually cold winters, followed by a warmer than average spring, appear to have affected M. arenaria and E. siliqua gametogenesis at these sites. It was noted that wet weight of E. siliqua dropped significantly in the summer of both 2010 and 2011, after spawning, which may impact on the economic viability of fishing during this period. Additional samples of M. arenaria were collected at Flaxfort (Ireland), and Ensis spp. at Oxwich (Wales), and the pathology of all clams was examined using both histological and molecular methods. No pathogenic conditions were observed in M. arenaria while Prokaryote inclusions, trematode parasites, Nematopsis spp. and inflammatory pathologies were observed at low incidences in razor clams from Ireland but not from Wales; the first time these conditions have been reported in Ensis spp. in northern European waters. Mya arenaria from sites in Europe and eastern and western North America were investigated for genetic variation using both mitochondrial (cytochrome oxidase I (COI) and 16S ribosomal RNA genes) and nuclear markers (10 microsatellite loci). Both mitochondrial CO1 and all nuclear markers showed reduced levels of variation in certain European samples, with significant differences in haplotype and allelic composition between most samples, particularly those from the two different continents, but with the same common haplotypes or alleles throughout the range. The appearance of certain unique rare haplotypes and microsatellite alleles in the European samples suggest a complicated origin involving North American colonization but also possible southern European Pleistocene refugia. Specimens of Ensis spp. were obtained from five coastal areas around Ireland and Wales and species-specific PCR primers were used to amplify the internal transcribed spacer region 1 (ITS1) and the mitochondrial DNA CO1 gene and all but 15 razor clams were identified as Ensis siliqua. Future investigations should focus on continued monitoring of reproductive biology and pathology of the two clam taxa (in particular, to assess the influence of environmental change), and on genetics of southern European M. arenaria and sequencing the CO1 gene in Ensis individuals to clarify species identity

A survey of sewer rehabilitation in Malaysia: application of trenchless technologies

This work presents a review of applicable sewer rehabilitation options using trenchless technology in Malaysia. The typical problems faced in wastewater collection systems are analysed and factors that determine the selection method are outlined. This study also highlights the necessary steps to be taken prior to the rehabilitation work. The trenchless technology reviewed here comprises repair, renovation and replacement options. The cost-effectiveness of different rehabilitation methods was identified to assess the economic viability of various options in the Malaysian context. This study reveals that not all the trenchless technologies available in the market are suitable for use in Malaysia, mainly due to incompatibility of the rehabilitation materials used. Furthermore, as trenchless rehabilitation generally involves higher capital outlay than open-cut methods, the choice of rehabilitation method has to be made on a case-to-case basis.

Can grass biomethane be an economically viable biofuel for the farmer and the consumer?

Farm incomes in Ireland are in decline and many farmers would operate at a loss in the absence of subsidies. Agriculture is responsible for 27% of Ireland's greenhouse gas emissions and is the largest contributing sector. Penetration of renewable energy in the heat and transport sectors is falling short of targets, and there is no clear plan for achieving them. The anaerobic digestion of grass to produce biogas or biomethane is put forward as a multifaceted solution, which could help meet energy and emissions targets, reduce dependence on imported energy, and provide additional farm income. This paper addresses the economic viability of such a system. Grass biogas/biomethane fares poorly under the current combined heat and power tariff structure, which is geared toward feedstock that attracts a gate fee. Tariff structures similar to those used in other countries are necessary for the industry to develop. Equally, regulation should be implemented to allow injection of biomethane into the gas grid in Ireland. Blends of natural gas and biomethane can be sold, offering a cost-competitive green fuel. Sale as a renewable transport fuel could allow profitability for the farmer and savings for the consumer, but suffers due to the lack of a market. Under current conditions, the most economically viable outlet for grass biomethane is sale as a renewable heating fuel. The key to competitiveness is the existing natural gas infrastructure that enables distribution of grass biomethane, and the renewable energy targets that allow renewable fuels to compete against each other. © 2010 Society of Chemical Industry and John Wiley & Sons, Ltd.

How much gas can we get from grass?

Grass biomethane has been shown to be a sustainable gaseous transport biofuel, with a good energy balance, and significant potential for economic viability. Of issue for the designer is the variation in characteristics of the grass depending on location of source, time of cut and species. Further confusion arises from the biomethane potential tests (BMP) which have a tendency to give varying results. This paper has dual ambitions. One of these is to highlight the various results for biomethane potential that may be obtained from the same grass silage. The results indicated that methane potential from the same grass silage varied from 350 to 493 L CH4 kg−1 VS added for three different BMP procedures. The second ambition is to attempt to compare two distinct digestion systems again using the same grass: a two stage continuously stirred tank reactor (CSTR); and a sequentially fed leach bed reactor connected to an upflow anaerobic sludge blanket (SLBR–UASB). The two engineered systems were designed, fabricated, commissioned and operated at small pilot scale until stable optimal operating conditions were reached. The CSTR system achieved 451 L CH4 kg−1 VS added over a 50 day retention period. The SLBR–UASB achieved 341 L CH4 kg−1 VS added at a 30 day retention time.

A long-term analysis of pumped hydro storage to firm wind power

Although pumped hydro storage is seen as a strategic key asset by grid operators, financing it is complicated in new liberalised markets. It could be argued that the optimum generation portfolio is now determined by the economic viability of generators based on a short to medium term return on investment. This has meant that capital intensive projects such as pumped hydro storage are less attractive for wholesale electricity companies because the payback periods are too long. In tandem a significant amount of wind power has entered the generation mix, which has resulted in operating and planning integration issues due to wind's inherent uncertain, varying spatial and temporal nature. These integration issues can be overcome using fast acting gas peaking plant or energy storage. Most analysis of wind power integration using storage to date has used stochastic optimisation for power system balancing or arbitrage modelling to examine techno-economic viability. In this research a deterministic dynamic programming long term generation expansion model is employed to optimise the generation mix, total system costs and total carbon dioxide emissions, and unlike other studies calculates reserve to firm wind power. The key finding of this study is that the incentive to build capital-intensive pumped hydro storage to firm wind power is limited unless exogenous market costs come very strongly into play. Furthermore it was demonstrated that reserve increases with increasing wind power showing the importance of ancillary services in future power systems. © 2014 Elsevier Ltd. All rights reserved.

Tanker Mission Implication on a Civil Aerial Refuelling Transport System’s Benefit Evaluation

As the emphasis on initiatives that can improve environmental efficiency while simultaneously maintaining economic viability has escalated in recent years, attention has turned to more radical concepts of operation. In particular, the cruiser–feeder concept has shown potential for a new generation, environmentally friendly, air-transport system to alleviate the growing pressure on the passenger air-transportation network. However, a full evaluation of realizable benefits is needed to determine how the design and operation of potential feeder-aircraft configurations impact on the feasibility of the overall concept. This paper presents an analysis of a cruiser–feeder concept, in which fuel is transferred between the feeder and the cruiser in an aerial-refueling configuration to extend range while reducing cruiser weight, compared against the effects of escalating existing technology levels while retaining the existing passenger levels. Up to 14% fuel-burn and 12% operating-cost savings can be achieved when compared to a similar technology-level aircraft concept without aerial refueling, representing up to 26% in fuel burn and 25% in total operating cost over the existing operational model at today’s standard fleet technology and performance. However, these potential savings are not uniformly distributed across the network, and the system is highly sensitive to the routes serviced, with reductions in revenue-generation potential observed across the network for aerial-refueling operations due to reductions in passenger revenue.

Potential impacts of climate change on agriculture and food safety within the island of Ireland

Climate and other environmental change presents a number of challenges for effective food safety. Food production, distribution and consumption takes place within functioning ecosystems but this backdrop is often ignored or treated as static and unchanging. The risks presented by environmental change include novel pests and diseases, often caused by problem species expanding their spatial distributions as they track changing conditions, toxin generation in crops, direct effects on crop and animal production, consequences for trade networks driven by shifting economic viability of production methods in changing environments and finally, wholesale transformation of ecosystems as they respond to novel climatic regimes.

Metodologia híbrida de desenvolvimento centrado no utilizador: aplicada ao software educativo

No panorama atual do desenvolvimento de software educativo é importante que os processos de desenvolvimento sejam adequados e compatíveis com o contexto em que serão utilizados este tipo de recursos. Desta forma, é importante melhorar continuamente os processos de desenvolvimento bem como se proceder à avaliação de forma a garantir a sua qualidade e viabilidade económica. Este estudo propõe uma Metodologia Híbrida de Desenvolvimento Centrado no Utilizador (MHDCU) aplicada ao software educativo. Trata-se de um processo de desenvolvimento simples, iterativo e incremental que tem como “alicerces” princípios do Design Centrado no Utilizador, especificados na International Organization for Standardization - ISO 13407. Na sua base encontra-se a estrutura disciplinada de processos de desenvolvimento, bem como práticas e valores dos métodos ágeis de desenvolvimento de software. O processo é constituído por 4 fases principais: planeamento (guião didático), design (storyboard), implementação e manutenção/operação. A prototipagem e a avaliação são realizadas de modo transversal a todo o processo. A metodologia foi implementada numa Pequena e Média Empresa de desenvolvimento de recursos educacionais, com o objetivo de desenvolver recursos educacionais com qualidade reconhecida e simultaneamente viáveis do ponto de vista económico. O primeiro recurso que teve por base a utilização desta metodologia foi o Courseware Sere – “O Ser Humano e os Recursos Naturais”. O trabalho seguiu uma metodologia de investigação & desenvolvimento, de natureza mista, em que se pretendeu descrever e analisar/avaliar uma metodologia de desenvolvimento de software educativo, i.e., o processo, bem como o produto final. O estudo é fundamentalmente descritivo e exploratório. A metodologia de desenvolvimento do software (primeira questão de investigação) foi proposta, essencialmente, com base na revisão integrativa da literatura da especialidade e com base nos resultados que emergiram das Fases 2 e 3. Do ponto de vista exploratório, foi avaliado, por um lado, o potencial técnico e didático da 1ª versão do software inserido no Courseware Sere (segunda questão de investigação), e, por outro lado, analisar os pontos fortes e as fragilidades da metodologia utilizada para o seu desenvolvimento (terceira questão de investigação). Como técnicas de recolha de dados recorreu-se a dois inquéritos por questionário e à observação direta participante (mediada pela plataforma moodle). Quanto às técnicas de análise de dados optou-se pela análise estatística descritiva e pela análise de conteúdo. Os resultados indicam que o recurso desenvolvido possui qualidade técnica e didática. Relativamente a análise da Metodologia Híbrida de desenvolvimento Centrado no Utilizador foram propostas algumas melhorias relacionadas com o envolvimento do utilizador e introdução de novos métodos. Apesar de identificadas algumas limitações, este projeto permitiu que a empresa melhorasse significativamente os processos de desenvolvimento de recursos (mesmo os que não são informatizados), bem como permitiu o aumento do seu portefólio com o desenvolvimento do Courseware Sere.

Aplicação de métodos de customer relationship management ao tratamento de dados para o desenvolvimento de negócios

Tese de Doutoramento, Gestão, na especialidade de Marketing, Faculdade de Economia, Universidade do Algarve, 2007

Avaliação técnica e econômica de um biodigestor de fluxo tubular: estudo de caso do modelo implantado na etec "orlando quagliato" em Santa Cruz do Rio Pardo, SP

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Análise da viabilidade da utilização de colectores solares

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecância

Uso eficiente da água nos Açores : análise de viabilidade e boas práticas em habitações unifamiliares

Dissertação de Mestrado, Engenharia e Gestão de Sistemas de Água, 4 de Março de 2016, Universidade dos Açores.

Relatório de estágio em gabinete de engenharia na componente de climatização

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica com Especialização em Energia, Climatização e Refrigeração

Aproveitamento de águas pluviais para rega

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Hidráulica

Projecto de fundações e estrutura de um edifício de habitação utilizando os eurocódigos estruturais

Trabalho de Projecto para obtenção do grau de Mestre em Engenharia Civil Perfil Estruturas