Repercussões do tempo operatório em pulmões de ratos idosos

A duração das operações pode representar um fator importante para uma série de complicações pós-operatórias, especialmente para os indivíduos idosos. Objetivo: estudar a repercussão nos pulmões, de operações de diferentes tempos de duração. Métodos: Vinte ratos idosos (18 meses) e 20 jovens (3 meses) foram separados aleatoriamente em grupos A e B respectivamente. Os grupos foram divididos em A1, A2, A3, A4, B1, B2, B3 and B4, com cinco ratos cada. Os animais foram anestesiados com pentobarbital (20mg/Kg) intraperitoneal. No subgrupo A1 e B1 foi feita operação com duração de 30 minutos, nos grupos A2 and B2 60 minutos, em A3 and B3 a operação foi feita em 120 minuto e os animais A4 e B4 (controle) não foram operados. O procedimento consistiu de laparotomia xifopubiana que foi aberta e fechada tantas vezes quanto necessário para atingir os tempos estipulados. Após o quinto dia pós-operatório os animais foram mortos com superdose de anestésico e biópsias de ambos os pulmões foram realizadas. Os achados histopatológicos foram transformados em escores. Resultados: os grupos de ratos jovens atingiram os escores: A1= escore 6, A2=11; A3=28; A4=5. Os ratos idosos tiveram os escores: B1=12; B2=34; B3=51 e B4=6. A análise estatística revelou diferenças significantes entre os escores dos grupos A e B. Conclusões: O tempo prolongado nas operações realizadas em ratos idosos contribuiu para o aparecimento de alterações pulmonares de modo significante. Quanto maior o tempo operatório, mais intensas e mais freqüentes as complicações pulmonares

Repercussões do tempo operatório em pulmões de ratos idosos

A duração das operações pode representar um fator importante para uma série de complicações pós-operatórias, especialmente para os indivíduos idosos. Objetivo: estudar a repercussão nos pulmões, de operações de diferentes tempos de duração. Métodos: Vinte ratos idosos (18 meses) e 20 jovens (3 meses) foram separados aleatoriamente em grupos A e B respectivamente. Os grupos foram divididos em A1, A2, A3, A4, B1, B2, B3 and B4, com cinco ratos cada. Os animais foram anestesiados com pentobarbital (20mg/Kg) intraperitoneal. No subgrupo A1 e B1 foi feita operação com duração de 30 minutos, nos grupos A2 and B2 60 minutos, em A3 and B3 a operação foi feita em 120 minuto e os animais A4 e B4 (controle) não foram operados. O procedimento consistiu de laparotomia xifopubiana que foi aberta e fechada tantas vezes quanto necessário para atingir os tempos estipulados. Após o quinto dia pós-operatório os animais foram mortos com superdose de anestésico e biópsias de ambos os pulmões foram realizadas. Os achados histopatológicos foram transformados em escores. Resultados: os grupos de ratos jovens atingiram os escores: A1= escore 6, A2=11; A3=28; A4=5. Os ratos idosos tiveram os escores: B1=12; B2=34; B3=51 e B4=6. A análise estatística revelou diferenças significantes entre os escores dos grupos A e B. Conclusões: O tempo prolongado nas operações realizadas em ratos idosos contribuiu para o aparecimento de alterações pulmonares de modo significante. Quanto maior o tempo operatório, mais intensas e mais freqüentes as complicações pulmonares

Repercussões do tempo operatório em pulmões de ratos idosos

A duração das operações pode representar um fator importante para uma série de complicações pós-operatórias, especialmente para os indivíduos idosos. Objetivo: estudar a repercussão nos pulmões, de operações de diferentes tempos de duração. Métodos: Vinte ratos idosos (18 meses) e 20 jovens (3 meses) foram separados aleatoriamente em grupos A e B respectivamente. Os grupos foram divididos em A1, A2, A3, A4, B1, B2, B3 and B4, com cinco ratos cada. Os animais foram anestesiados com pentobarbital (20mg/Kg) intraperitoneal. No subgrupo A1 e B1 foi feita operação com duração de 30 minutos, nos grupos A2 and B2 60 minutos, em A3 and B3 a operação foi feita em 120 minuto e os animais A4 e B4 (controle) não foram operados. O procedimento consistiu de laparotomia xifopubiana que foi aberta e fechada tantas vezes quanto necessário para atingir os tempos estipulados. Após o quinto dia pós-operatório os animais foram mortos com superdose de anestésico e biópsias de ambos os pulmões foram realizadas. Os achados histopatológicos foram transformados em escores. Resultados: os grupos de ratos jovens atingiram os escores: A1= escore 6, A2=11; A3=28; A4=5. Os ratos idosos tiveram os escores: B1=12; B2=34; B3=51 e B4=6. A análise estatística revelou diferenças significantes entre os escores dos grupos A e B. Conclusões: O tempo prolongado nas operações realizadas em ratos idosos contribuiu para o aparecimento de alterações pulmonares de modo significante. Quanto maior o tempo operatório, mais intensas e mais freqüentes as complicações pulmonares

Repercussões do tempo operatório em pulmões de ratos idosos

A duração das operações pode representar um fator importante para uma série de complicações pós-operatórias, especialmente para os indivíduos idosos. Objetivo: estudar a repercussão nos pulmões, de operações de diferentes tempos de duração. Métodos: Vinte ratos idosos (18 meses) e 20 jovens (3 meses) foram separados aleatoriamente em grupos A e B respectivamente. Os grupos foram divididos em A1, A2, A3, A4, B1, B2, B3 and B4, com cinco ratos cada. Os animais foram anestesiados com pentobarbital (20mg/Kg) intraperitoneal. No subgrupo A1 e B1 foi feita operação com duração de 30 minutos, nos grupos A2 and B2 60 minutos, em A3 and B3 a operação foi feita em 120 minuto e os animais A4 e B4 (controle) não foram operados. O procedimento consistiu de laparotomia xifopubiana que foi aberta e fechada tantas vezes quanto necessário para atingir os tempos estipulados. Após o quinto dia pós-operatório os animais foram mortos com superdose de anestésico e biópsias de ambos os pulmões foram realizadas. Os achados histopatológicos foram transformados em escores. Resultados: os grupos de ratos jovens atingiram os escores: A1= escore 6, A2=11; A3=28; A4=5. Os ratos idosos tiveram os escores: B1=12; B2=34; B3=51 e B4=6. A análise estatística revelou diferenças significantes entre os escores dos grupos A e B. Conclusões: O tempo prolongado nas operações realizadas em ratos idosos contribuiu para o aparecimento de alterações pulmonares de modo significante. Quanto maior o tempo operatório, mais intensas e mais freqüentes as complicações pulmonares

Inês de Castro no romance contemporâneo português

Ines de Castro is a theme in literature from the fourteenth century. The historical fact of his death, in 1355, became a landmark in the history of Portugal and, since then, several literary texts from various genres, have dealt with this theme, this made the couple Pedro and Ines a myth of love passion, of love beyond the barriers of death, like Tristan and Isolde, Romeo and Juliet, Abelard and Heloise. The literary myth - or any picture that mythologize literature - is always prepared before culturally and works in the same way that so many others, this is, as an element of cultural identity, either collectively or individually, making it also a feature poetic. Thereby, is an archetype confirmed through time and eventually reveals a series of webs of the human psyche. Ines de Castro became the Portuguese myth of eternal love: she became queen after your dead. The persistence of the myth makes the love story of Pedro and Ines continue to produce texts of various literary genres. This study examines six contemporary historical novels, to show that the way actually this kind o novel does a new formulacion of Pedro e Ines mythical, because now it s different view likes the victim in Os lusiadas and other texts from the past. Collaborate to this news relacions between history and literature and a novelist's new stance in relation to historical facts that relate like reffering to novel. The intention is to show, through the novels chosen now Ines de Castro have different profiles than it had before in tradicional historic novels from the period of Romanticism and New Romanticism. Authored by Agustina Bessa-Luís, João Aguiar, António Cândido Franco, Seomara da Veiga Ferreira and Luis Rosa, the six novels studied show the circularity cultural of inesian myth showing this new character of the new person Ines in the contemporany historical novel

De baixo para cima: implicações socioespaciais da transferência da feira livre na (re)produção do espaço urbano de Nova Cruz-RN (1991-2010)

The present work is about the reproduction of the urban area of Nova Cruz RN, with the objective of analyzing the social and spatial implications of the relocation of the main street market in the city from 1991 on. Nowadays, the city of Nova Cruz takes over importance in the potiguar social and spatial scenario due to its condition of central city which is practiced for decades in Potiguar Agreste Microregion. Beginning with its formation process connected with traveler‟s hostel which assisted the activity of cattle transportation, further in time by the golden era of cotton production in its territory, it was noticed that its importance in relation with the nearby towns has been happening differently throughout time. From the year 1991 on, the town of Nova Cruz has gone through a territory restructuring of its urban area due to the relocation of the open market from Downtown neighborhood to São Sebastião neighborhood. Such territorial movement resulted in a reformation of the town‟s urban space, promoting in both neighborhoods urban growth and the expansion of commercial activity associated with the migration of the commercial center of the city. The transference of the commercial area has caused these processes through the new uses of the land towards the São Sebastião region, it has also caused a decrease in market value of the downtown area as a result of the breakdown of previous existing business activities, their service contribution and the citizen migration, establishing a space and socioeconomic portrait in the neighborhood. From this context, our analysis seeks to understand the social and spatial impacts occurred in Downtown neighborhood, the way in which the production and reproduction of the urban space in São Sebastião neighborhood and the implications resulted from the actions of the administrative power in restructuring of the urban space of Nova Cruz. In order to do so, a bibliographical research was used to compose our theoretic-conceptual mark, discussing the matter with authors such as Roberto Lobato Corrêa, Ana Fani, Milton Santos, Manuel Castells e Heri Lefvbre, among others, discussing on the subject of urban analysis, the concepts of urban space and the process of reproduction of the urban space. A field research was utilized in our area of study by means of primary data gathering through interviews, questionnaire and photographic register. Secondary data gathering was also obtained by means of bibliographical and documental research related to our study object. By these means, it was sought to contribute to the understanding of the urban space through its production and reproduction based upon the discovery of social and spatial practices

Efeito da adição de microfibras de lã de vidro na tenacidade à ruptura de pastas de cimento para poços de petróleo

Although there are a wide variety of additives that act in fresh state, to adjust the properties of cement, there is also a search by additions that improve the tenacity of the cement in the hardened state. This, in turn, can often be increased by inserting fibers, which act on the deflection of microcracks. This study aimed to use a microfiber glass wool (silica-based) as an additive reinforcing the cement matrix, improving the rupture tenacity, in order to prevent the propagation of microcracks in the cement sheath commonly found in oil wells submitted to high temperatures. The fibers were added at different concentrations, 2 to 5% (BWOC) and varied average sizes, grinding for 90 s, 180 s, 300 s, 600 s. The cement slurries were made with a density of 1,90 g/ cm3 (15,6 lb/gal), using Portland cement CPP- Special Class as the hydraulic binder and 40% silica flour. The characterization of the fiber was made by scanning electron microscopy (SEM), particle size by sieving, X-ray fluorescence (XRF), X-ray diffraction (XRD) and thermogravimetry (TG / DTG). Were performed technological tests set by the API (American Petroleum Institute) by rheology, stability, free water, compressive strength, as well as testing rupture energy, elastic modulus and permeability. The characterization results showed good thermal stability of the microfiber glass wool for application in oil wells submitted to steam injection and, also, that from the particle size data, it was possible to suggest that microfibers milled up to 300 s, are ideal to act as reinforcement to the cement slurries. The rheological parameters, there was committal of plastic viscosity when larger lengths were inserted of microfiber (F90). The values obtained by free water and stability were presented according to API. The mechanical properties, the incorporation of microfiber to the cement slurries gave better rupture tenacity, as compared to reference cement slurries. The values of compressive strength, elastic modulus and permeability have been maintained with respect to the reference cement slurries. Thus, cement slurries reinforced with microfiber glass wool can ensure good application for cementing oil wells submitted to steam injection, which requires control of microcracks, due to the thermal gradients

Estudo do perfil térmico de fornos do tipo "caipira" utilizados pelo setor de cerâmica vermelha em parelhas na região Seridó-RN

The present study aimed to characterize the thermal profile of wood fired oven used by the red ceramic industry in Parelhas, in the Seridó region/RN, aiming to propose structural interventions that can contribute to increasing productivity and product quality, optimize wood consumption and mitigate existing losses during the burning process. The study was conducted at Cerâmica Esperança in the city of Parelhas -RN, Brazil, during the period from August 2012 to September 2013. Four treatments were performed with three replicates, ie, with, a total of 12 experimental units (burnings). In the first stage 4 treatments were performed with three replicates, totaling 12 experimental units (firings). In the second stage 2 treatments were performed with three replications, totaling 6 experimental units (firings). The physical characteristics of the wood were analyzed using standard NBR 11941 and NBR 7190 for basic density and moisture, respectively. The clay was used as a reference parameter for distinguishing treatments. For both the analysis and characterization was carried out using techniques of fluorescence X (XRF) rays, X-ray diffraction (XRD) analysis, particle size analysis (FA). In the first and second stages were monitored: the time during the firing process, the amount of wood used at each firing, the number of parts enfornadas for subsequent determination of the percentages of losses, but also product quality. To characterize the thermal profile of the oven, we measured the temperature at 15 points scored in the surface charge put into the oven. Measurements were taken every 30 minutes from preheat until the end of burning, using a pyrometer laser sight sighting from preheating until the end of burning. In the second step 12 metal cylinders distributed on the oven walls, and the cylinder end walls 8 of the furnace 2 and rollers on each side walls are installed equidistant to 17 cm from the soil and the surface 30 of the wall are installed. The cylinders distributed on the front were placed 50 cm above the furnace, and the base of the oven 20 cm distant from the ground. 10 also thermocouples were installed, and five thermocouples distributed 1.77 cm above the combustion chambers, and one thermocouple on each side, and three thermocouples in front of the oven. We carried out the measurements of the temperatures every 1 hour during the burning two hours in cooling the cylinders with a pyrometer and thermocouples for dattaloger. These were fixed with depth of 30 cm from the wall. After statistical analysis it was found that: the thermal profile of the furnace surface and at different heights was heterogeneous; and the ranges of density and moisture content of wood are within recommended for use as an energy source standards. We conclude that even at low temperatures reached during firing there was a significant production of good quality products, this is due to high concentrations of iron oxide and potassium oxide found in clay, which lowers the melting point of the piece. The average burn time for each step varied 650-2100 minutes wood consumption was on average 20 m3, product quality was on average 16% of first quality, 70% second, third and 5% to 10% loss . The distance between the wire and the surface of the oven was a significant parameter for all treatments, but with different variations, meaning that the wire should not be so generic and unique form, used as a criterion for completion of the burn process. The central part of the furnace was the area that reached higher temperature, and in a unified manner, with the highest concentration of top quality products. The ideal temperature curve, which provided the highest quality of ceramic products was achieved in the central part of the furnace

Testemunhos de um tempo vivido : fragmentos e contextos de uma narrativa de Janduís-RN

Shows up the memory of the elderly, as a consistent experience in the in the construction of the social memory of Janduís, Rio Grande do Norte, where the research takes place. Through an autobiographic narrative, in a qualitative approaching, the intent is to stand up aspects about the individual history and collective memories, starting in a simple question: what did they remember? A question that turns into many others, as how the remember and under which circumstances. So, the lived and remembered moments are the subject of this paper, as these testimonials shows and reveals the citizens typical aspects, intending to telling (again) the city s history by the memories of this people. By oral statements and the analysis that followed, subjective aspects that made a social memory, highlight in violent episodes, that, now remembered, occurred in the historical sediment, which connects several social times, establishing a narrative standard. In Janduís, this standard is about the memory that sticks out their individual ways, and the collective life, in the past, standing out the fair and the events that occurred on it, as the most remembered place, where the memories go stronger. When they narrate are incorporated others facts, the story is reinvented, connecting the past to the future. The paper also revels builders subjects aspects of a social memory, as historical sediment that joins the social times. At the present moment, the fair, to them, is a place that doesn t exist anymore; for the city, is a place of enlargement of women s presence at the trending spaces, which means a place of social transformation. That being said, the fair, in both times, present and past, turns into a analysis object, with important elements to reference narrative s time and place. And how the narrative update the past recorded in the old citizen s memory. What was intended to do was articulate the memory and the history form temporal and special etching that define the place and the narrative context: the lived and the remembered at the group s day by day. In that way, were identify the collective memory s common elements, enunciating the memory and the narratives that update that history, influencing and being influenced, forming in memories in a collective phenomenon fueling the local imaginary

Reflexões sobre o dito e o feito nas intervenções pedagógicas no Programa Segundo Tempo

Ao longo desta pesquisa, defendemos que projetos sociais como o Programa Segundo Tempo podem ampliar seus objetivos e ações interventivas para além da inclusão social de pessoas excluídas socialmente do acesso a direitos sociais, considerando esses espaços também como promotores de possibilidades educativas. Dialogamos com diversos autores da área da Educação, da Educação Física e das Ciências Sociais, para fortalecer nossos argumentos. Nesse sentido, nossa proposta de pesquisa orientou-se pelo método de pesquisa ação e pelas estratégias e técnicas de pesquisa que o apoiam, desenvolvendo uma proposta de intervenção e acompanhamento sistemático caracterizado basicamente pela realização de seminários e ciclos de observação da prática pedagógica dos monitores e coordenadores de núcleo do PST no convênio da Prefeitura Municipal de Riacho da Cruz, a fim de contribuir para processos de tomada de consciência e mudanças na prática pedagógica que se apresentassem indesejáveis às orientações teóricas e metodológicas do PST. Para tanto, buscamos analisar os problemas da transição das orientações teóricas e metodológicas do PST e contribuir para essa transição por meio de acompanhamento pedagógico sistemático. Partimos de uma questão de estudo que não se encerra em si mesma, mas que foi constantemente alimentada por novas problemáticas e objetivos emergidos do campo empírico durante a pesquisa: quais são os limites e possibilidades encontrados pelos monitores e coordenadores de núcleo do PST para aplicar as orientações teóricas e metodológicas nos núcleos do programa? Os resultados demonstraram que as principais limitações enfrentadas pelos recursos humanos do convênio da Prefeitura Municipal de Riacho da Cruz para aplicar as orientações do PST são: não formação específica na área de Educação Física ou Esporte; experiências de trabalho com o ensino do esporte anteriores ao trabalho no PST, insuficientes ou inexistentes; fragilidades no processo de capacitação segundo modelo do PST que não possibilitaram mais exemplos de experiências para o ensino do esporte nos núcleos; e fragilidades no formato de acompanhamento pouco assíduo realizado pela Equipe Colaboradora. Sobre as possibilidades para superação desse quadro encontramos, justamente na participação e envolvimento do próprio grupo sujeito em tentar minimizar essas limitações, buscando na proposta de acompanhamento pedagógico por seminários e ciclos de observações das atividades desenvolvidas, uma alternativa importante para a resolução das situaçõesproblemas emergidas nesta pesquisa. Desse modo, o sucesso da proposta desenvolvida nos levou a algumas conclusões, dentre as quais está a de que o sucesso do PST não reside somente na cobrança da especificidade da área ou grau de formação dos monitores e coordenadores de núcleo que lidam com o trabalho pedagógico nos núcleos dos convênios, mas na realização de um acompanhamento mais assíduo das Equipes Colaboradoras aos núcleos, que possibilite maiores momentos de troca de experiências entre as Equipes Colaboradoras do PST e o recursos humanos, inclusive considerando as variantes de contexto, estreitando assim a relação teoria e prática no PST. Por fim, reconhecemos as limitações do nosso estudo, o que abre perspectivas para futuras reformulações, mas esperamos contribuir para a interface estabelecida entre as áreas de Educação Física e Ciências Sociais, ampliando os conhecimentos relativos à prática pedagógica em projetos sociais

Qualidade em serviços de saúde: uma contribuição à definição de um modelo paramétrico e padrão de qualidade do tempo agendado para consulta ambulatorial

The knowledge management has received major attention from product designers because many of the activities within this process have to be creative and, therefore, they depend basically on the knowledge of the people who are involved in the process. Moreover, Product Development Process (PDP) is one of the activities in which knowledge management manifests in the most critical form once it had the intense application of the knowledge. As a consequence, this thesis analyzes the knowledge management aiming to improve the PDP and it also proposes a theoretical model of knowledge management. This model uses five steps (creation, maintenance, dissemination, utilization and discard) through the verification of the occurrence of four types of knowledge conversion (socialization, externalization, combination and internalization) that it will improve the knowledge management in this process. The intellectual capital in Small and Medium Enterprises (SMEs) managed efficiently and with the participation of all employees has become the mechanism of the creation and transference processes of knowledge, supporting and, consequently, improving the PDP. The expected results are an effective and efficient application of the proposed model for the creation of the knowledge base within an organization (organizational memory) aiming a better performance of the PDP. In this way, it was carried out an extensive analysis of the knowledge management (instrument of qualitative and subjective evaluation) within the Design department of a Brazilian company (SEBRAE/RN). This analysis aimed to know the state-of-the-art of the Design department regarding the use of knowledge management. This step was important in order to evaluate in the level of the evolution of the department related to the practical use of knowledge management before implementing the proposed theoretical model and its methodology. At the end of this work, based on the results of the diagnosis, a knowledge management system is suggested to facilitate the knowledge sharing within the organization, in order words, the Design department

Controlador em modo dual adaptativo robusto - DMARC

The so-called Dual Mode Adaptive Robust Control (DMARC) is proposed. The DMARC is a control strategy which interpolates the Model Reference Adaptive Control (MRAC) and the Variable Structure Model Reference Adaptive Control (VS-MRAC). The main idea is to incorporate the transient performance advantages of the VS-MRAC controller with the smoothness control signal in steady-state of the MRAC controller. Two basic algorithms are developed for the DMARC controller. In the first algorithm the controller's adjustment is made, in real time, through the variation of a parameter in the adaptation law. In the second algorithm the control law is generated, using fuzzy logic with Takagi-Sugeno s model, to obtain a combination of the MRAC and VS-MRAC control laws. In both cases, the combined control structure is shown to be robust to the parametric uncertainties and external disturbances, with a fast transient performance, practically without oscillations, and a smoothness steady-state control signal

Influência da corrente de pulso, do tempo de pulso e diâmetro de gota sobre a estabilidade da transferência metálica no processo MIG-P

To obtain a process stability and a quality weld bead it is necessary an adequate parameters set: base current and time, pulse current and pulse time, because these influence the mode of metal transfer and the weld quality in the MIG-P, sometimes requiring special sources with synergistic modes with external control for this stability. This work aims to analyze and compare the effects of pulse parameters and droplet size in arc stability in MIG-P, four packets of pulse parameters were analysed: Ip = 160 A, tp = 5.7 ms; Ip = 300 A and tp = 2 ms, Ip = 350 A, tp = 1.2 ms and Ip = 350 A, tp = 0.8 ms. Each was analyzed with three different drop diameters: drop with the same diameter of the wire electrode; droplet diameter larger drop smaller than the diameter of the wire electrode. For purposes of comparison the same was determined relation between the average current and welding speed was determined generating a constant (Im / Vs = K) for all parameters. Welding in flat plate by simple deposition for the MIG-P with a distance beak contact number (DBCP) constant was perfomed subsequently making up welding in flat plate by simple deposition with an inclination of 10 degrees to vary the DBCP, where by assessment on how the MIG-P behaved in such a situation was possible, in addition to evaluating the MIG-P with adaptive control, in order to maintain a constant arc stability. Also high speed recording synchronized with acquiring current x voltage (oscillogram) was executed for better interpretation of the transfer mechanism and better evaluation in regard to the study of the stability of the process. It is concluded that parameters 3 and 4 exhibited greater versatility; diameters drop equal to or slightly less than the diameter of the wire exhibited better stability due to their higher frequency of detachment, and the detachment of the drop base does not harm the maintenance the height of the arc

Otimização do tempo e temperatura no processamento da gipsita oriunda dos cristalizadores da produção de sal para obter gesso de uso na construção civil

During the process of the salt production, the first the salt crystals formed are disposed of as industrial waste. This waste is formed basically by gypsum, composed of calcium sulfate dihydrate (CaSO4.2H2O), known as carago cru or malacacheta . After be submitted the process of calcination to produce gypsum (CaSO4.0,5H2O), can be made possible its application in cement industry. This work aims to optimize the time and temperature for the process of calcination of the gypsum (carago) for get beta plaster according to the specifications of the norms of civil construction. The experiments involved the chemical and mineralogical characterization of the gypsum (carago) from the crystallizers, and of the plaster that is produced in the salt industry located in Mossoró, through the following techniques: x-ray diffraction (XRD), x-ray fluorescence (FRX), thermogravimetric analysis (TG/DTG) and scanning electron microscopy (SEM) with EDS. For optimization of time and temperature of the process of calcination was used the planning three factorial with levels with response surfaces of compressive mechanical tests and setting time, according norms NBR-13207: Plasters for civil construction and x-ray diffraction of plasters (carago) beta obtained in calcination. The STATISTICA software 7.0 was used for the calculations to relate the experimental data for a statistical model. The process for optimization of calcination of gypsum (carago) occurred in the temperature range from 120° C to 160° C and the time in the range of 90 to 210 minutes in the oven at atmospheric pressure, it was found that with the increase of values of temperature of 160° C and time calcination of 210 minutes to get the results of tests of resistance to compression with values above 10 MPa which conform to the standard required (> 8.40) and that the X-ray diffractograms the predominance of the phase of hemidrato beta, getting a beta plaster of good quality and which is in accordance with the norms in force, giving a by-product of the salt industry employability in civil construction

Relações entre mídia e lazer:o capitalismo, os meios e a apropriação do tempo livre nas sociedades industrial e pós-industrial

This research aims to understand the relationship between media, capitalism and ownership of free time for leisure practices in industrial societies and postindustrial. Searching is thus a conceptual framework that takes into account the kind of ideology that naturalizes the relationship of leisure with the foundations of contemporary media, and the media only with leisure, forgetting their insertion in the labor and industrial relations in society. We intend to demonstrate that every mode of production, in the capitalist system, entails a mode of reproduction. Methodologically, this is a first approximation, from theoretical concerns already performed, constituting a theoretical research, bibliographic and descriptive character. The results of the text drives us to the conclusion that the work and leisure spheres tend to be less and less differentiated, since both remain as activities of product management with the same intellective protocols, based on information and communication technology, and that accordingly, the media favors an expansion of productive activity even during leisure time