Desenvolvimento de sistemas de aditivos químicos para aplicação em cimentações de poços de petróleo

The primary cementing is an important step in the oilwell drilling process, ensuring the mechanical stability of the well and the hydraulic isolation between casing and formation. For slurries to meet the requirements for application in a certain well, some care in the project should be taken into account to obtain a cement paste with the proper composition. In most cases, it is necessary to add chemicals to the cement to modify its properties, according to the operation conditions and thus obtain slurries that can move inside the jacket providing a good displacement to the interest area. New technologies of preparation and use of chemicals and modernization of technological standards in the construction industry have resulted in the development of new chemical additives for optimizing the properties of building materials. Products such as polycarboxylate superplasticizers provide improved fluidity and cohesion of the cement grains, in addition to improving the dispersion with respect to slurries without additives. This study aimed at adapting chemical additives used in civil construction to be used use in oilwell cement slurries systems, using Portland cement CPP-Special Class as the hydraulic binder. The chemical additives classified as defoamer, dispersant, fluid loss controller and retarder were characterized by infrared absorption spectroscopy, thermogravimetric analyses and technological tests set by the API (American Petroleum Institute). These additives showed satisfactory results for its application in cement slurries systems for oil wells. The silicone-based defoamer promoted the reduction of air bubbles incorporated during the stirring of the slurries. The dispersant significantly reduced the rheological parameters of the systems studied. The tests performed with the fluid loss controller and the retarder also resulted in suitable properties for application as chemical additives in cement slurries

Legislação de rotulagem nutricional: instrumento de informação na promoção de escolhas alimentares - Natal-RN

Resolutions of the Board of numbers 359 and 360, of December 23, 2003, relating to Nutrition Labelling for Packaged Foods, establish quality standards and provide the education activities for health consumption, since one of the factors that enable the selection of healthier foods are the food labels as an important part in nutrition education. This is a descriptive study with a cross-sectional design. To calculate sample size, it was considered a margin of error of 20%, confidence level of 95% and prevalence of 52.5% for verifying nutritional information in a pilot study conducted in 2007. A total of 145 subjects were interviewed, resulting in 371 consumers in Natal, Rio Grande do Norte, Brazil, in order to determine prevalence of consulting nutritional information contained on food labels as a nutritional guideline for consumers and its association with sociodemographic variables as well as identify the intervention measures suggested by intervieweds so that this information can be better used to select healthy foods. Twenty-five of the 69 supermarkets belonging to the Supermarket Association of Rio Grande do Norte (ASSURN) were randomly selected. Data collection relied on interviews and extensive direct observation, using a semi-structured form composed of eight closed questions, some of which were multiple choice, and ten open questions. The chi-square test was performed for statistical analysis, using Statistical Package for Social Sciences (SPSS) 15.0 software. Label information most consulted was: expiry date (91.6%); product brand (49.4%); nutritional information (47.0%); zero trans fat (32.9%); zero sugar content (12.8%); zero fat content (3.0%); rich in fibers (2.7%); whether light or diet (30.4%); list of ingredients (16.8%); whether the product contained gluten or not (4.1%). When asked about the importance of nutritional information, 96.8% of the subjects responded important or very important ; of these 46.6% and 3.8% reported partially or totally understanding the information presented. It was found that 41.6% of the consumers consulted nutritional information for dietary reasons related to nontransmissible chronic diseases and 35.7% to be able to choose healthier foods. The data show a significant association between motivation to choose healthier foods and higher family income and schooling (p<0.0001). The intervention measures mentioned to make nutritional information better understood and used were: information and orientation about nutritional information, provided by qualified professionals in the supermarkets, the commercial establishment or the product manufacturer (73.9%) and media disclosure about the nature, importance and purpose of nutritional information (42.9%). In despite of communication noises the consumers use the nutrition claim for the nutritional guidance, showing association with some demographic variables. However, they desire the implementation of intervention measures that can be contextualized in the political construction of nutrition education to promote healthy food choices

Efeitos de peixes zooplanctívoros e onívoros sobre a resposta de comunidades planctônicas à fertilização por nutrientes

The food chain theory predict that presence of omnivory prevent the trophic cascade and could be a strong stabilizing factor over resource and consumer community dynamics, and that the nutrient enrichment destabilize populations dynamics. Most of the freshwater tropical reservoirs are eutrophic, and strategies that seek improve the water quality through the control of phytoplankton biomass and nutrient input, become essential for the improvement and preservation of water quality. The aim of this study was test the zooplanktivory (when larvae) and omnivory (when young and adult) effects of Nile Tilapia over the structure and dynamics of plankton communities, in addition or absence of nutrients enrichment. For this, one field experiment was performed with a factorial design 2x3 resulting in six treatments: control, without fish and nutrient (C); with omnivorous fish (O); with zooplanktivorous fish (Z); without fish and with enrichment of nutrients (NP); with omnivorous fish and nutrients (ONP); and, with zooplanktivorous fish and nutrients (ZNP). The two planktivory types reduced the zooplankton biomass and increased the phytoplankton biomass, but the omnivory of filter-feeding fish attenuated the trophic cascade magnitude. The fertilization by nutrients increases the nutrient concentrations in water and the phytoplankton biomass, but the effect on zooplankton is dependent of the trophic structure. In a general way, the effects of the fish and nutrient addition were addictive, but significant interactions among those factors were observed in the answer of some zooplankton groups. The effects of omnivorous fish over the temporal variability of phytoplankton and zooplankton biomass were very variable, the increase or reduce in variability of the plankton depending of the level of nutrients and of the analyzed variable. With base in this study, we conclude that the planktivory type exercised by the fish and the concentrations of nutrients in the water affects the force of pelagic trophic cascades and probably the success of biomanipulation programs for the handling of water quality in lakes and tropical reservoirs

Estudo da regeneração de aditivos para catalisadores de craqueamento aluminofosfatos (ALPO s)e silicoaluminofosfatos (SAPO s)

Heterogeneous catalysts such as aluminophosphate and silicoaluminophosphate, molecular sieves with AEL of ALPO-11 and SAPO-11, were synthesized by the hydrothermal method with the following molar composition: 2.9 Al +3.2 P + 3.5 DIPA +32.5 H20 (ALPO-11); 2.9 Al +3.2 P + 0.5 Si + 3.5 DIPA +32.5 H20 (SAPO-11) starting from silica (only in the SAPO-11), pseudoboehmite, orthophosphoric acid (85%) and water, in the presence of a di-isopropylamine organic template. The crystallization process occurred when the reactive hydrogel was charged into a vessel and autoclaved at 170ºC for a period of 48 hours under autogeneous pressure. The obtained materials were washed, dried and calcined to remove the molecular sieves of DIPA. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), infrared spectroscopy (FT-IR), thermo gravimetric differential thermal analysis (TG/DTA) and nitrogen adsorption (BET). The acidic properties were determined using adsorption of n-butylamine followed by programmed thermodessorption. This method revealed that ALPO-11 has weaker acid sites due to structural defects, while SAPO-11 shows an acidity that ranges from weak to moderate. However, a small quantity of strong acid sites could be detected there. The deactivation of the catalysts was conducted by the cracking of the n-hexane in a fixed bed continuous flow microrreator coupled on line to a gas chromatograph. The main products obtained were: ethane, propane, isobutene, n-butane, n-pentane and isopentane. The Vyazovkin (model-free) kinetics method was used to determine the regeneration and removal of the organic template

Desenvolvimento de sistemas de aditivos químicos para aplicação em cimentações de poços de petróleo

The primary cementing is an important step in the oilwell drilling process, ensuring the mechanical stability of the well and the hydraulic isolation between casing and formation. For slurries to meet the requirements for application in a certain well, some care in the project should be taken into account to obtain a cement paste with the proper composition. In most cases, it is necessary to add chemicals to the cement to modify its properties, according to the operation conditions and thus obtain slurries that can move inside the jacket providing a good displacement to the interest area. New technologies of preparation and use of chemicals and modernization of technological standards in the construction industry have resulted in the development of new chemical additives for optimizing the properties of building materials. Products such as polycarboxylate superplasticizers provide improved fluidity and cohesion of the cement grains, in addition to improving the dispersion with respect to slurries without additives. This study aimed at adapting chemical additives used in civil construction to be used use in oilwell cement slurries systems, using Portland cement CPP-Special Class as the hydraulic binder. The chemical additives classified as defoamer, dispersant, fluid loss controller and retarder were characterized by infrared absorption spectroscopy, thermogravimetric analyses and technological tests set by the API (American Petroleum Institute). These additives showed satisfactory results for its application in cement slurries systems for oil wells. The silicone-based defoamer promoted the reduction of air bubbles incorporated during the stirring of the slurries. The dispersant significantly reduced the rheological parameters of the systems studied. The tests performed with the fluid loss controller and the retarder also resulted in suitable properties for application as chemical additives in cement slurries

Projeto café do trabalhador como promotor de segurança alimentar e nutricional: avaliação da eficácia da unidade Natal-RN

The evaluation of public policies that promote Food Security and Nutrition (FSN) it s a multidisciplinary activity extremely relevant to the effectiveness of actions to legitimize the Human Right to Adequate Food (HRAF). This study aimed at assessing the effectiveness of the unit project Natal-RN Café do Trabalhador in promoting SAN to its users. The theoretical framework is based on the public and political and on the dimensions of the concept of FSN (quantity and quality-regularity). Through a qualitative approach, methodologically this was the work of an evaluation of efficiency of the unit Natal-RN of Café do Trabalhador project in light of the assumptions of the concept of SAN. Data collection was conducted through retrospective archival research in official documents of the project, semi-structured interviews with managers involved in its implementation (representative of the Secretary of State for Employment, Housing and Care of RN SETHAS and third party), socioeconomic questionnaire applied to the users of the unit, check the amount, regularity and quality of meals offered for 15 days (menu routine) using the descriptive form menu and form filling type checklist for verification of compliance with good practices . Methods of analysis, we used content analysis, descriptive statistics and compared to previously established parameters for the project. As categories of analysis were defined organizational arrangement, access, user, food quantity-regularity and food quality. The results show that, it was found in the category arrangement that will implement the project dismissed technical criteria for choosing the districts and the quantitative distribution of meals for each location. It was found that the valuation of the shares of the company outsources technical SETHA has not been performed. We observed in the access category, the unit has a strategic location, but lack of space in the refectory. The main obstacle to economic access for users is the lack of a register for the beneficiaries. In the category of users, it was identified that the clientele of the project it is predominantly men, with more than 51 years, low education, earning wages less 1 obtained through informal employment, which they move up through the unit transport collective, go to all days of operation due primarily to price. About the meals category quantity-regularity of food showed that the menu serves 95% of the desired needs, and that holidays and weekends are periods of disrupting the regularity of supply of meals. Regarding the category of food quality, it was found that the nutritional aspect on the menu are food sources rich in sodium, nitrates and low in fiber. In the aspect of hygiene and sanitation are the main limitations related to waste management, lack of exposure controls of food prepared and inadequacies of the physical structure. The results showed that in general and the institutional arrangement of the organs attached to the project should establish a systematic evaluation project is to establish as a promoter of and FSN overcome these obstacles

Dieta do ouriço-branco, Tripneustes ventricosus (Lamarck, 1816), no Arquipélago de Fernando de Noronha, PE

Sea urchins are benthic macroinvertebrates that inhabit shallow coastal waters in tropical and temperate zones. Urchins are usually classified as generalists or omnivores as they can adjust their diet according to the food resources available in the environment. Due to the strong grazing pressure they may exert, urchins have an important role in marine ecosystems, occupying different trophic levels and stimulating the intensification of the dynamics of communities where they occur. In 2004, a monitoring program focused on the population dynamics of the white sea urchin, Tripneustes ventricosus, has been initiated in the Fernando de Noronha Archipelago. At the same time, a surprisingly lack of information on the species biology has been noted, despite their wide geographical distribution and economic importance in many parts of its range. Hence, this work was developed to provide information on the feeding habits of T. ventricosus in the archipelago. Ten specimens were collected between December 2006 and July 2007 at two sites of the archipelago, Air France and Sueste Bay for biometrics and analysis of gut contents. Test diameters ranged from 9.19 cm (± 1.1) to 10.08 cm (± 0.58). Calculated stomach repletion index (IRE) was higher (p <0.05) in the Air France site and also during January and July. The IRE was not correlated to the gonad index. Fifteen different species of algae were detected in a total of 120 stomachs examined: 4 Chlorophytas, 4 Phaeophytas and 6 Rhodophytas. Food diversity (p <0.05) was higher in December 2006 and January 2007. Although several items had a high frequency of occurrence, they were low represented in terms of weight, and consequently, had a low level of relative importance. The brown algae Dictyopteris spp and Dictyota spp, followed by the green algae Caulerpa verticillata accounted for the greatest importance in T. ventricosus diet, comprising about 90% of the consumed items

Ecologia alimentar e reprodutiva da piaba-do-rabo-amarelo, Astyanax cf. lacustris (Reinhardt, 1874) (Osteichthyes: Characidae) na Lagoa do Piató, Assu, Rio Grande do Norte, Brasil

The feeding habits and biological aspects of the reproductive cycle of two-spot astyanax, Astyanax cf. lacustris (Reinhardt, 1874) were investigated. Fish samples were captured on a monthly basis, using gillnets of 4 cm mesh size, from the Piató Lake, Assu, Rio Grande do Norte, during the period of September, 2006 to August, 2007. Physico-chemical parameters, such as, temperature, electrical conductivity and dissolved oxygen of the lake were registered. The monthly values of rainfall also were obtained. The 360 individuals captured, were measured, weighed, dissected, and stomach weight and the stage of gonadal maturity were registered. The stomach contents analyses were carried out based on volumetric method, points, frequency of occurrence and applying the Index of Relative Importance. The degrees of repletion of the stomachs were determined besides the Index of Repletion relating to feeding activity variations and frequency of ingestion with limnological parameters and rainfall. The food items identified were separated into distinct groups according to their origin. Sex ratio and Gonadosomatic Relation of females were verified to determine the spawning period and fecundity. The physico-chemical parameters presented the following annual mean values: temperature = 28.8ºC, electrical conductivity = 992.5 µS.cm-1; dissolved oxygen = 4.9 mg.L-1 during the study period. The annual mean of the rainfall was 63.5 mm. The results indicate that this species present an omnivorous feeding habit with a tendency towards insectivory, with an increase in feeding activity during the dry season. The aquatic oxygen to interfere very importance in the feeding activity than the others factors physico-chemicals of water and rainfall. There was a predominance of females, with a sex proportion of 1M:7F. The macroscopic characteristics of the ovaries and testicles revealed four stages of gonadal development: immature, maturing, mature and spent. A temporal variation was observed for the gonadal development of males and females. There was reproductive activity through out the year, with peaks in the months of February, April and June to correspond with the rain of precipitation of the region. The mean fecundity was 7.681 mature oocytes, varying from 4.476 to 12.036, with mean of 7.681. There was positive relation between fecundity and body mass. Condition Factor is not an efficient indicator of the reproductive period of this species. The species A. cf. lacustris is an opportunist and is well adapted to the conditions of the semi-arid Caatinga Biome

Utilização de embriões liofilizados e flocos de Artemia na diversificação nutricional de pós-larvas do camarão marinho Litopenaes vannamei (Boone, 1931)

The objective of the current study was to evaluate the zootechnical performance (survival and growth) of Litopenaeus vannamei post-Iarvae fed an artificial shrimp diet supplemented with Artemia flakes or freeze-dried Artemia embryos. For that purpose, 20 culturing units were individually stocked with 50 shrimp post-Iarvae (average dry weight of 0,3 ± 0,03 mg) at a stocking density of 20 post-larvae per liter, and fed the experimental diets to satiation during 20 days. The experimental design consisted of four diets (T1, T2, T3 and T4) with five repetitions each. For treatments T1, T2 and T3, dietary supplements of 5mg of Artemia flakes (T1), freeze-dried Artemia embryos (T2), and of the commercial shrimp diet (T3) were offered 2 hours after the shrimp were initially fed the commercial shrimp diet. For treatment T4 (control), no additive was offered 2 hours after the initial feeding. Shrimp survival, absolut (GPA) and relative increase in weight (GPR), and specific growth rate (TCR) were used as evaluation criteria. After the experimental period, no significant statistical differences (p>0,05) in survival were observed. Regarding growth, the dietary treatment which used freeze-dried Artemia embryos as an additive (T2) presented the best results for GPA (6,7 ± 0,7 mg). There were no statistical differences within treatments T1, T3 and T4 (p>0,05). AIso, post-larvae fed freeze-dried embryos (T2) showed a relative increase in weight (2241,4%) which differed significantly (p<0,05) from T4(1911,7%) but not from T1 (1801,6%) or T3 (1946,7%). In conclusion, the results of the current study indicate that an artificial shrimp diet supplemented with freeze-dried Artemia embryos fulfils the nutritional requirements of post-larvae L. vannamei and promotes a better growth than diets not supplemented with Artemia flakes

Características limnológicas e estrutura trófica das comunidades de peixes de alguns lagos naturais e artificiais do Rio Grande do Norte

Artificial lakes must differ from natural lakes in important structural and functional aspects that need to be understood so that these ecosystems can be properly managed. The aim of this work was to test the hypothesis that the artificial lakes (impoundments) in the semi-arid region of the Rio Grande do Norte State are more eutrophic and turbid and have different trophic structure when compared to the natural coastal lakes that occur in the humid eastern coast of the State. To test this hypothesis, 10 natural lakes and 8 artificial lakes with about 100 ha were sampled between September and November 2005 for the determination of some limnological variables and the abundance of the main fish species, which were grouped in three trophic guilds: facultative piscivores, facultative planktivores and omnivores. The results show that the artificial lakes had significantly higher concentrations of total nitrogen, total phosphorus, chlorophyll a , total and volatile suspended solids than the natural lakes. Results also show that the values of pH, total alkalinity, electric conductivity, turbidity as well as the coefficient of vertical attenuation of light were significantly higher in the artificial lakes than in the natural lakes. In the artificial lakes, the abundance of facultative planktivores was significantly higher, while the abundance of facultative piscivores significantly lower than in the natural lakes. There was no significant difference in the abundance of omnivorous fish between the two types of lakes. These results suggest that the increase in turbidity together with the other changes in the water quality of the artificial lakes, modifies the trophic structure of the fish communities reducing the importance of piscivores and the length of the food chains

Adição de superplastificante e anti-segregante à base de CMC em pastas de cimento para Poços de Petróleo

Oil well cementing materials consist of slurries of Special class Portland cement dispersed in water. Admixtures can be used to provide the necessary fluidity, so the material can be efficiently pumped down as well as penetrate porous rocks with controlled filter loss. Construction admixtures can be used to modify the properties of oil well cements provided they can withstand and hold their properties at the higher than ambient temperatures usually encountered in oil fields. In civil construction, superplasticizer play the role of dispersants that reduce the facto r of water cement improve mechanical properties and fluidity of the cement, whereas anti-segregation agents improve the workability of the slurry. In the present study, oil well cement slurries were produced adding both a dispersant and an anti-segregation agent conventionally used in Portland CPII-Z-32 RS cement aiming at materials for primary cementing and squeeze operations. Three basic aspects were evaluated: fluidity, filter loss and the synergetic effect of the admixtures at two temperatures, i.e., 27°C and 56°C, following API RP 10B practical recommendations. The slurries were prepared using admixture concentrations varying from 2.60 Kgf/m3 (0.02 gallft3) to 5.82 Kgf/m3 (0.045 galJft3) BWOC. The density of the slurries was set to 1.89 g/cm3 (15.8 Ib/gal). 0.30 to 0.60% BWOC of a CMC-based anti-segregation agent was added to the cement to control the filter loss. The results showed that the addition of anti-segregation at concentrations above 0.55% by weight of cement resulted in the increased viscosity of the folders in temperatures evaluated. The increasing the temperature of the tests led to a reduction in the performance of anti-segregation. At concentrations of 5.20 kgf/m3 (0,040 gallft3) and 5.82 Kgf/m3 (0,045 gal/ft 3) observed a better performance of the properties evaluated in the proposed system. At low temperature was observed instability in the readings of rheology for all concentrations of anti-segregation. Contents that increasing the concentration of anti¬-segregation is limited concentrations greater than 0.55 % BWOC of the CMC in temperature analyzed. The use of the system with CMC promoted a good performance against the properties evaluated. The principal function of anti¬-segregation was optimized with increasing concentration of superplasticizer, at temperatures above the 2rC. The study of the behaviour of systemic additives, resulting in slurries of cement, which can be optimized face studies of other intrinsic properties in oil fields

Estudo da adição de argila expandida na formulação de concretos leves

Lightweight concrete has been the subject of several studies towards the development of new building materials. Emphasis has been given on the particle size effect and nature of aggregates used as raw materials. The present study includes an analysis of the materials that make this kind of concrete, analyzes of mechanical properties such as compressive and tensile strength, in addition to assessments of the interface concrete aggregate/matrix interface, porosity and absorption profile of chloride ions in lightweight concrete based on expanded clay. The experiments were carried out by molding cylindrical samples 100 mm in diameter and 200 mm in height. The dosage experiments were performed without additives or with the addition of minerals: (T1) 1: 2.01: 1.10: 0.78 (T2) 1: 2.00: 1.32 : 0.62 - (T3) 1 :1.93 :1.54: 0.47 (cement : sand : expanded clay 0500 : expanded clay 1506).The water to cement ratio was set to 0.43. Expanded clay minerals with different average particle sizes were used, i.e., 9.5 mm/0500 and 19 mm/1506. The larger aggregate was coated by a glassy layer, yielding lower water absorption characteristics to the concrete. The results showed that the use of light expanded clay aggregates is a technically interesting solution to the production of lightweight concrete for construction applications

Análise do comportamento reológico de pastas de cimento contendo resíduos de pneu para poços de petróleo

The low tenacity presented by the Portland cement pastes used in the oil wells cementation has been motivating several researches with attention focused on alternative materials. Additives have been developed to generate flexible pastes with mechanical resistance capable to support the expansions and retractions of the metallic covering of the wells that submit to the steam injection, technique very used to increase the recovery factor in oil reservoirs with high viscosity. A fresh paste with inadequate rheological behavior may commit the cementation process seriously, involving flaws that affect the performance of the paste substantially in the hardened state. This work proposes the elaboration and the rheological analysis of Portland cement pastes with addition of residues of rubber tire in several proportions, with the aim of minimizing the damages provoked in the hem cementing of these wells. By thermogravimetric analysis, the particles of eraser that go by the sieve of 0,5mm (35 mesh) opening and treated superficially with NaOH solution of 1 mol/L presented appropriate thermal resistance for wells that submit to thermal cyclic. The evaluation of the study based on the results of the rheological analysis of the pastes, complemented by the mechanical analysis, thickening, stability, tenor of free water and filtrate loss, being used as parameter a paste reference, without rubber addition. The results showed satisfactory rheology, passive of few corrections; considerable loss of mechanical resistance (traction and compression), compensated by earnings of tenacity, however with established limits for its application in oil wells; satisfactory stability, free water and thickening time

Obtenção de óxidos a base de níquel e cobalto para reação de oxidação parcial do metano

Nickel-based catalysts supported on alumina have been widely used in various reactions to obtain synthesis gas or hydrogen. Usually, higher conversion levels are obtained by these catalysts, however, the deactivation by coke formation and sintering of metal particles are still problems to be solved. Several approaches have been employed in order to minimize these problems, among which stands out in recent years the use of additives such as oxides of alkali metals and rare earths. Similarly, the use of methodologies for the synthesis faster, easier, applicable on an industrial scale and to allow control of the microstructural characteristics of these catalysts, can together provide the solution to this problem. In this work, oxides with spinel type structure AB2O4, where A represents divalent cation and B represents trivalent cations are an important class of ceramic materials investigated worldwide in different fields of applications. The nickel cobaltite (NiCo2O4) was oxides of spinel type which has attracted considerable interest due to its applicability in several areas, such as chemical sensors, flat panel displays, optical limiters, electrode materials, pigments, electrocatalysis, electronic ceramics, among others. The catalyst precursor NiCo2O4 was prepared by a new chemical synthesis route using gelatine as directing agent. The polymer resin obtained was calcined at 350°C. The samples were calcined at different temperatures (550, 750 and 950°C) and characterized by X ray diffraction, measurements of specific surface area, temperature programmed reduction and scanning electron microscopy. The materials heat treated at 550 and 750°C were tested in the partial oxidation of methane. The set of techniques revealed, for solid preparations, the presence of the phase of spinel-type structure with the NiCo2O4 NixCo1-xO solid solution. This solid solution was identified by Rietveld refinement at all temperatures of heat treatment. The catalyst precursors calcined at 550 and 750°C showed conversion levels around 25 and 75%, respectively. The reason H2/CO was around 2 to the precursor treated at 750°C, proposed reason for the reaction of partial oxidation of methane, one can conclude that this material can be shown to produce synthesis gas suitable for use in the synthesis Fischer-Tropsch process

Estudo sobre o efeito dos parâmetros de processamento dos pós e sinterização do aço inox 316l reforçado com NbC

This masther dissertation presents a contribution to the study of 316L stainless steel sintering aiming to study their behavior in the milling process and the effect of isotherm temperature on the microstructure and mechanical properties. The 316L stainless steel is a widely used alloy for their high corrosion resistance property. However its application is limited by the low wear resistance consequence of its low hardness. In previous work we analyzed the effect of sintering additives as NbC and TaC. This study aims at deepening the understanding of sintering, analyzing the effect of grinding on particle size and microstructure and the effect of heating rate and soaking time on the sintered microstructure and on their microhardness. Were milled 316L powders with NbC at 1, 5 and 24 hours respectively. Particulates were characterized by SEM and . Cylindrical samples height and diameter of 5.0 mm were compacted at 700 MPa. The sintering conditions were: heating rate 5, 10 and 15◦C/min, temperature 1000, 1100, 1200, 1290 and 1300◦C, and soaking times of 30 and 60min. The cooling rate was maintained at 25◦C/min. All samples were sintered in a vacuum furnace. The sintered microstructure were characterized by optical and electron microscopy as well as density and microhardness. It was observed that the milling process has an influence on sintering, as well as temperature. The major effect was caused by firing temperature, followed by the grinding and heating rate. In this case, the highest rates correspond to higher sintering.