296 resultados para Engenharia de produção


Relevância:

70.00% 70.00%

Publicador:

Resumo:

The evolution of the practices and strategies of manufacturing management, over the years, has made many companies realign their production systems in order to raise their competitiveness and operational performance. However, in most cases these changes are made in a heterogeneous manner, which ends up leaving the production system without a defined goal, which may end up damaging the managerial strategies of the organization as a whole. Thus, some organizations seek to use techniques and/or successful production practices used by other companies, believing can be able to reproduce the same results. An efficient production system must be fully planned and appropriate to the strategic objectives of the organization. Thus, this paper aims to identify the manufacturing management strategies adopted in paraibanas industries, as well as identify the lean practices used by them. Thus, a qualitative study was conducted, using as methodological basis the multicase study. Were made: direct observations, semi-structured interviews and questionnaires applied to those responsible by the production sector of the participating companies. As a result, it was possible to identify the type of manufacturing management system adopted by companies. Where it was detected that Company A uses a system of Modern Mass Production with focus on productivity and low cost and the Company B is using Lean Manufacturing system focused on quality and diversity. In the two organizations was possible to realize the application of lean practices where the Company what does not use the LM, possessed lean practices in standard extremely mature of utilization.

Relevância:

70.00% 70.00%

Publicador:

Resumo:

This master's thesis aims to analyze the activity of the operators in a control room of the processes of production on-shore petroleum, with a focus on sociotechnical restrictions that interfere in the decision-making process and the actions of operators and therefore, the strategies (individual and collective) to regulate and maintain the operator action required and the safety of the system, together. The activity in focus involves the supervision and control of the production of thousands of barrels of oil/day in a complex and dispersed production’s structures built in an extension of 80 km. This operational framework highlights the importance of this activity for the fulfilment of the targets local and corporate efficiency, good management of the environment, health and safety of operators. This is an exploratory research and in the field, which uses the methodology of Ergonomic Analysis of the Work, composed of observational techniques and interactional, having as locus control room of the processes of production on-shore oil of an oil company. The population of this research is formed by operators in the control room of an Brazilian oil company. The results showed that the supervisory activity and control of the superheated steam injection is an complex context, demands greater attention, concentration, calculations, comparisons, trend analysis and decision making. The activity is collectively constructed between the control room operator, field operator and the supplier of steam. The research showed that the processes of communication and collaboration between the control room , fields and support staff are the key elements of this activity. The study shows that the operators have the autonomy and the elements necessary for work; and that there is continuous investments to improve the technology used and that the operators report sleep disturbances as a result of chronic exposure to night work. The study contributed with proposals for transformation of this activity: with regard to the installation of a area reserved for food in control room, the update the screens of the supervisory current operating condition, the periodic visits by room operators in the field, standardization of production reports, development assistance and standardization of nomenclature of controlling stations steam systems, to improve the conditions of realization of the activity, improve the quality of products produced by operators and contribute to reduce the possibility of slips or shifts in the activity.

Relevância:

70.00% 70.00%

Publicador:

Resumo:

Chitosan is a natural polymer, biodegradable, nontoxic, high molecular weight derived from marine animals, insects and microorganisms. Oligomers of glucosamine (GlcN) and N-acetylglucosamine (GlcNAc) have interesting biological activities, including antitumor effects, antimicrobial activity, antioxidant and others. The alternative proposed by this work was to study the viability of producing chitooligosaccharides using a crude enzymes extract produced by the fungus Metarhizium anisopliae. Hydrolysis of chitosan was carried out at different times, from 10 to 60 minutes to produce chitooligosaccharides with detection and quantification performed by High Performace Liquid Chromatography (HPLC). The evaluation of cytotoxicity of chitosan oligomers was carried out in tumor cells (HepG2 and HeLa) and non-tumor (3T3). The cells were treated for 72 hours with the oligomers and cell viability investigated using the method of MTT. The production of chitosan oligomers was higher for 10 minutes of hydrolysis, with pentamers concentration of 0.15 mg/mL, but the hexamers, the molecules showing greater interest in biological properties, were observed only with 30 minutes of hydrolysis with a concentration of 0.004 mg/mL. A study to evaluate the biological activities of COS including cytotoxicity in tumor and normal cells and various tests in vitro antioxidant activity of pure chitosan oligomers and the mixture of oligomers produced by the crude enzyme was performed. Moreover, the compound with the highest cytotoxicity among the oligomers was pure glucosamine, with IC50 values of 0.30; 0.49; 0.44 mg/mL for HepG2 cells, HeLa and 3T3, respectively. Superoxide anion scavenging was the mainly antioxidant activity showed by the COS and oligomers. This activity was also depending on the oligomer composition in the chitosan hydrolysates. The oligomers produced by hydrolysis for 20 minutes was analyzed for the ability to inhibit tumor cells showing inhibition of proliferation only in HeLa cells, did not show any effect in HepG2 cells and fibroblast cells (3T3)

Relevância:

60.00% 60.00%

Publicador:

Resumo:

PEDRO, Edilson da Silva; ALVES, Maria Rita Pontes Assumpção. Capacitaçao e gestao tecnologica agroindustrial: um estudo de caso no setor sucroalcooleiro. In: SIMPOSIO DE ENGENHARIA DE PRODUÇAO, 10., 2003, Bauru, SP. Anais...Bauru, SP: UNESP, 2003.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

PEDRO, Edilson da Silva; ASSUMPÇAO, Maria Rita Pontes. Capacitação tecnológica em usina do setor sucroalcooleiro. In: ENCONTRO NACIONAL DE ENGENHARIA DE PRODUÇAO, 23., Ouro Preto,MG, 2003. Anais...Ouro Preto, MG: UFOP, 2003.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

RAMOS, A. S. M. Estágio da difusão das tecnologias internet em organizações acadêmicas. In: ENCONTRO NACIONAL DE PRODUÇÂO, 18., 1998, Niteroi-RJ. Anais... Niteroi: ENP, 1998.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

RAMOS, A. S. M.; OLIVEIRA, M. A. Fatores de sucesso na implementação de sistemas integrados de gestão empresarial (ERP): estudo de caso em uma média empresa. In: ENCONTRO NACIONAL DE ENGENHARIA DE PRODUÇÂO, 22., 2002, Curitiba-PR. Anais... Porto Alegre-RS: ABEPRO, 2002. v. 1.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

CAMPOS,Maria da Luz Góis; ANEZ,Miguel Eduar- do Moreno; CARÍCIO,Marcelo Rique. Estratégias de Competitividade Industrial em Empresas Cooperativas:O caso COMTERN. In:ENCONTRO NACIONAL DE ENGENHARIA DE PRODUÇÃO, 23, 2003, Minas Gerais. Anais...Ouro Petro: ADEPRO, 2003. p. 1-8.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Este trabalho tem dois objetivos: avaliar a usabilidade de três interfaces de ambientes virtuais de educação à distância através de duas técnicas avaliativas e identificar os fatores influenciadores da percepção de usabilidade dos ambientes avaliados. Os sistemas de educação à distância escolhidos foram o AulaNet, o E-Proinfo e o Teleduc, por serem desenvolvidos no Brasil e terem distribuição gratuita. A avaliação da usabilidade foi realizada através de duas técnicas documentadas na literatura. A primeira técnica de avaliação, do tipo preditiva ou diagnóstica, foi realizada pelo autor e um concluinte do curso de Sistemas de Informação do Centro Federal de Educação Tecnológica do estado do Piauí (CEFET-PI), mediante a observação de um checklist denominado Ergolist. A segunda avaliação, do tipo prospectivo, foi efetivada com o usuário sendo o próprio avaliador das interfaces, através de um questionário. A amostra foi composta de 15 professores e 15 alunos do CEFET-PI. Os resultados colhidos foram analisados a partir da estatística descritiva e testes de chi-quadrado. Os resultados mostraram que os ambientes apresentarem problemas de adaptabilidade, pois não possuem flexibilidade e nem levam em consideração a experiência do usuário. Na análise inferencial, foi constatado que o tempo de uso da Internet não afetou significativamente sua avaliação da usabilidade dos três ambientes, assim como na maior parte das variáveis de usabilidade não foram influenciadas pelo tipo de usuário , sexo e escolaridade . Por outro lado, em vários dos critérios ergonômicos avaliados, as variáveis de sistema tipo de ambiente e experiência com computador e a variável demográfica faixa etária afetaram a percepção de usabilidade dos ambientes virtuais de educação à distância

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Este trabalho objetiva determinar que características do corpo funcional da DIMEC (Diretoria de Mercado de Capitais do Banco do Brasil) estão associadas aos principais entraves considerados relevantes pelos funcionários da área durante a implementação do Balanced Scorecard (BSC). Pretende-se salientar como entraves tais como a falta de apoio de Tecnologia de Informação e a falta de hábito dos funcionários em lidar com indicadores não financeiros podem se relacionar com as características de interesse do corpo funcional, tais como nível hierárquico , formação acadêmica e nível de conhecimento da ferramenta BSC , de forma a influenciar na implementação do modelo. Para tanto foi realizada revisão de literatura e estudo de caso no qual figuraram, como instrumentos de coleta de dados, a aplicação de questionários e a entrevista não-estruturada através dos quais funcionários da DIMEC demonstraram as relações entre as variáveis descritas de forma a destacar fatores de relevância para o desenrolar do processo de implantação da ferramenta BSC na referida empresa

Relevância:

60.00% 60.00%

Publicador:

Resumo:

This thesis deals with the factors affecting customer satisfaction and loyalty in the supermarket sector. It is adapted a model proposed by Johnson et al. (2001) and included the brand construct as a loyalty of construct antecedent. It is conducted a survey with a sample of 290 customers of a supermarket in Natal city, Brazil, and descriptive and multiple regression statistical analysis. The main findings are that the proposed model is confirmed with quality being the main factor affecting satisfaction, but also in this case the place marketing construct playing a key role on satisfaction. The loyalty model is also supported by this research with the brand construct appearing important for a segment of the customers. This study support the conclusion that customer satisfaction is not the sole or main factor to explain loyalty

Relevância:

60.00% 60.00%

Publicador:

Resumo:

A modeling of criterias and alternatives is through and applied a questionnaire based on method AHP to proprietors of gas stations. The considered alternatives had been the maintenance of the current state with electric energy of the deliverer and the generation in small scale based on the natural gas. The used criteria had been Cost of the Investment, Final Cost of the Energy, Operational cost, Ambient Benefits, Risk and Variation of Costs. The study it was carried through in the city of Natal, RN in ranks that make use of the natural as for resale, where the generation alternative on the basis of the available gas is present. The main results evidence in a dimension the viability of use of method AHP with questionnaire by means of validation of the judgments with analysis of variance beyond proper the normal mechanisms of analysis of consistency to the method. The main results of the analysis help to show that in this in case that the profile of models of criteria and judgments of the actors is similar, with the final evidence of that it has a dominance of the maintenance of the energy of the deliverer. The main criterion to influence this decision was the risk

Relevância:

60.00% 60.00%

Publicador:

Resumo:

This work provides a discussion involving the development of practices in Environmental Education (EE) in Natal-RN city, taking as reference the Programa Vamos Cuidar do Brasil com as Escolas (PVCBE). The EE is emphasized by importance it takes within the context of the reforms carried out in Brazil to formal education, especially from the decade of 1980. The investigations focus the effect of PVCBE in promoting the EE. We take as theoretical - methodological base the global/national guidelines on EE, carried out the non-participant observation, document analysis, and application of questionnaires and use of statistical techniques in the data tabulation. The results indicate that there has been reasonable progress to the achieving of an implementation policy of EE clearly qualitative, with a better coordination among municipal policymakers and the schools involved. It has been also noticed that there is a gap between what the law provides for a formal EE and what is carried out in practice. Despite the limitations noted, we must remember that actions have been achieved. Even considering that they are isolated action; they already show that there are possibilities of follow ways to processes based on the criteria of integration, reflexive action, quality and autonomy

Relevância:

60.00% 60.00%

Publicador:

Resumo:

This work aims to promote design aspects into furniture Small and Medium Enterprises (SME s) at Rio Grande do Norte State. The final outcome will be an increasing on their competitiveness as well as consider design as key strategic aspect for their business. As a consequence, the results are based on two SME companies from the furniture sector located at Natal/RN. The study is based on a literature research followed by a management diagnosis for each company. The diagnosis was base don interviews with the entrepreneurs and their employees as well as meetings, participant observations and document analysis. Based on this analysis, specific aspects were implement in order to boost the production line as well as the product development process (PDP) and the development of a prototype. The results have indicated some limitation of these companies regarding their low technological on their production line, poor management and work skills as well as low perception of design as a competitive tool. Regardless these results, it was observed that design has brought an important contribution for cultural changes within companies as well as for the development of better quality and competitive products

Relevância:

60.00% 60.00%

Publicador:

Resumo:

This present Thesis, is explorer work and presents an analysis of e-wastes of the industry of cellular mobile telephony, evaluating the evolution of the telecommunications nets and as if it holds the global and Brazilian market of cellular telephony. It approaches the elements gifts in the cellular devices that can badly cause to the environment and the health, the discarding of the devices in end of life cycle is made. It analyzes the new European regulation of electric equipment residues and electronic, the WEEE, as it influenced the strategy of the companies manufacturers of mobile phone cellular and of that she forms is possible to create a Brazilian national industry for recycling of devices of cellular, with conditions to globally competition. For this some possible models of being implanted in Brazil are presented. The project of law 203/91 on solid residues is argued and as it would be interesting if to persist some proposals presented to the project, to create a Brazilian market of recycling with capacity of global competition for use to advantage of the European regulation if to get a competitive advantage