The analysis of café espresso using two-dimensional reversed phase–reversed phase high performance liquid chromatography with UV-absorbance and chemiluminescence detection

In this study, an activity based screening technique combining two-dimensional liquid chromatography (2DHPLC) with UV-absorbance and chemiluminescence detection was applied to study “Ristretto”, "Decaffeinatto” and “Volluto” espresso coffees. This technique, which coupled the separation power of 2DHPLC with the sensitivity and selectivity of the chemiluminescence detection, offers great potential for screening complex samples for antioxidant compounds. Detailed information regarding the complexity of the sample, and the variation between these three coffees could be obtained using this multidimensional-hyphenated method of analysis.

Absorbance of retinal oil droplets of the budgerigar : sex, spatial and plumage morph-related variation

Intraspecific variation in photoreceptor physiology is known in several vertebrate taxa, but is currently unknown in birds, despite many avian traits varying intraspecifically, and avian visual ecology encompassing a wide range of environments and visual stimuli, which might influence spectral sensitivity. Avian retinal photoreceptors contain light absorbing carotenoid-rich oil droplets that affect vision. Carotenoids are also important plumage components. However, our understanding of the regulation of carotenoids in oil droplets remains rudimentary. Among birds, Melopsittacus undulatus has probably the best-studied colour vision, shows profound intraspecific variation in plumage colour, and increased plasma carotenoids during moult. We used microspectrophotometry to determine whether a relationship exists between oil droplet carotenoid concentration and plumage pigmentation, and tested for sex and spatial variation in droplet absorbance across the retina. Absorbance of one variety of P-type droplets was higher in males. No relationship was found between droplet absorbance and plumage colour. We found a spatial pattern of droplets absorbance across the retina that matched a pattern found in another parrot, and other avian species. Our work provides insights into the development and maintenance of retinal oil droplets and suggests a common mechanism and function for carotenoid deposition in the retina across bird species.

Donor-п-acceptor conjugated copolymers for photovoltaic applications : tuning the open-circuit voltage by adjusting the donor/acceptor ratio

A class of new conjugated copolymers containing a donor (thiophene)−acceptor (2-pyran-4-ylidene-malononitrile) was synthesized via Stille coupling polymerization. The resulting copolymers were characterized by 1H NMR, elemental analysis, GPC, TGA, and DSC. UV−vis spectra indicated that the increase in the content of the thiophene units increased the interaction between the polymer main chains to cause a red-shift in the optical absorbance. Cyclic voltammetry was used to estimate the energy levels of the lowest unoccupied molecular orbital (LUMO) and the highest occupied molecular orbital (HOMO) and the band gap (Eg) of the copolymers. The basic electronic structures of the copolymers were also studied by DFT calculations with the GGA/B3LYP function. Both the experimental and the calculated results indicated an increase in the HOMO energy level with increasing the content of thiophene units, whereas the corresponding change in the LUMO energy level was much smaller. Polymer photovoltaic cells of a bulk heterojunction were fabricated with the structure of ITO/PEDOT/PSS (30 nm)/copolymer−PCBM blend (70 nm)/Ca (8 nm)/Al (140 nm). It was found that the open-circuit voltage (Voc) increased (up to 0.93 V) with a decrease in the content of thiophene units. Although the observed power convention efficiency is still relatively low (up to 0.9%), the corresponding low fill factor (0.29) indicates considerable room for further improvement in the device performance. These results provided a novel concept for developing high Voc photovoltaic cells based on donor-π-acceptor conjugated copolymers by adjusting the donor/acceptor ratio.

Do green and golden bell frogs (Litoria aurea) occupy habitats with fungicidal properties?

The Green and Golden Bell frog Litoria aureo is in major decline in Australia, where its distribution is now confined mainly to the east coast of New South Wales (NSW). Infection by the newly emerged amphibian fungal pathogen Batrachochytrium dendrobatidis has been identified as one of the main threats affecting L. aurea. Surprisingly, some of the sites in NSW sustaining the largest populations of this species are industrial and urban habitats that are often disturbed and polluted, which could protect L. aurea from chytrid infection if pollution had fungicidal capacity.The aim of this study was to characterise the trace metal concentration of several L. aurea breeding sites in the Sydney and IIlawarra regions of NSW and to evaluate the fungicidal efficacy of the main "'ace metals identified. Selected L. aurea sites were sampled throughout the breeding season (September to February) to establish the concentration of trace metals in both surface sediment and waters. Physico-chemical parameters including pH and salinity were also measured. Of the trace metals identified, copper and zinc were consistently elevated across sites. Over 50% of sites exceeded the National Sediment Quality Guideline for both copper and zinc concentration, and over 90% of sites exceeded the National Water Quality Guideline for these metals. Consequently, we evaluated their effect on the growth and survival of a laboratory culture of B. dendrobatidis,These tests were performed in media containing dissolved metal concentrations of 0.02 - 0.65 mgL^-1 Cu and 0.24 - 5.0 mgL^-1 Zn. Growth rates were inferred by total fungal density in liquid culture (based on spectral absorbance measurements), final dry weight, and the density of zoospores in fungal cultures grown for 28 days. Both copper and zinc were found to reduce the growth and proliferation of B. dendrobatidis, but in a non-linear manner. This suggests that L. aurea may be gaining some protection from B. dendrobatidis infection at several of the sites examined.

Effects of undoped and manganese-doped zinc oxide nanoparticles on the colour fading of dyed polyester fabrics

This paper describes the effects of applying coatings of an acrylic polymer containing nanoparticles of zinc oxide (ZnO) on the fading rate in artificial sunlight of polyester fabrics dyed with disperse dyes containing anthraquinone and benzopyran chromophores. Factors affecting the transparency and UV absorbance of the coatings are discussed. Removing the UV component of sunlight with ZnO nanoparticles markedly decreased the fading rate of the dyes, provided the polymer/ZnO film was not in direct contact with the fabric. When the treatment was applied directly to the fabrics, however, the protection against colour fading was different for the two dyes studied. Whereas the rate of colour fading of a benzopyran dye, of relatively low lightfastness, was decreased by the polymer-ZnO film, the treatment increased the fading rate of the dye of higher lightfastness, based on anthraquinone. This effect has been attributed to the generation of reactive oxygen species (ROS) when ZnO is exposed to UV. The effect of decreasing the photoactivity of ZnO by doping with manganese has been examined. For the benzopyran dye, the UV protection was greatly increased, whereas a much smaller improvement was found for the anthraquinone-based dye.

Avian retinal oil droplets : dietary manipulation of colour vision?

Avian vision is highly developed, with bird retinas containing rod and double-cone photoreceptors, plus four classes of single cones subserving tetrachromatic colour vision. Cones contain an oil droplet, rich in carotenoid pigments (except VS/ultraviolet-sensitive cones), that acts as a filter, substantially modifying light detected by the photoreceptor. Using dietary manipulations, we tested the effects of carotenoid availability on oil droplet absorbance properties in two species: Platycercus elegans and Taeniopygia guttata. Using microspectrophotometry, we determined whether manipulations affected oil droplet carotenoid concentration and whether changes would alter colour discrimination ability. In both species, increases in carotenoid concentration were found in carotenoid-supplemented birds, but only in the double cones. Magnitudes of effects of manipulations were often dependent on retinal location. The study provides, to our knowledge, the first experimental evidence of dietary intake over a short time period affecting carotenoid concentration of retinal oil droplets. Moreover, the allocation of carotenoids to the retina by both species is such that the change potentially preserves the spectral tuning of colour vision. Our study generates new insights into retinal regulation of carotenoid concentration of oil droplets, an area about which very little is known, with implications for our understanding of trade-offs in carotenoid allocation in birds.

Visual pigments, cone oil droplets and ocular media in four species of estrildid finch

A microspectrophotometric study was conducted on the retinal photoreceptors of four species of bird: cut-throat finches (Amadina fasciata), gouldian finches (Erythrura gouldiae), white-headed munias (Lonchura maja) and plum-headed finches (Neochmia modesta). Spectral characteristics of the photoreceptors in all four species were very similar. Rods contained a medium-wavelength-sensitive visual pigment with a wavelength of maximum absorbance at 502-504 nm. Four spectrally distinct types of single cone contained a visual pigment with wavelength of maximum absorbance at either 370-373 nm (ultraviolet-sensitive), 440-447 nm (short-wavelength-sensitive); 500 nm (medium-wavelength-sensitive) or 562-565 nm (long-wavelength-sensitive). Oil droplets in the ultraviolet-sensitive single cones showed no detectable absorption between 330 nm and 800 nm. Oil droplets in the short-, medium-, and long-wavelength-sensitive single cones had cut-off wavelengths at 415-423 nm, 510-520 nm and 567-575 nm, respectively. Double cones contained the visual pigment with wavelength of maximum absorbance at 562-565 nm observed in long-wavelength-sensitive single cones. Only the principal member of the double cone pair contained an oil droplet (P-type, cut-off wavelength at 414-489 nm depending on species and retinal location). Spectral transmittance of the intact ocular media of each species was measured along the optic axis. Wavelengths of 0.5 transmittance for all species were very similar (316-318 nm).

Unusual spectroscopic properties of PPE/TiO2 composite and its sensor response to TNT

A composite from a broad bandgap polymer, poly(phenylene ethylene) (PPE), and nano-sized TiO₂ particles was found to be able to sense 2,4,6-trinitrotoluene (TNT) for TNT sensor. Fluorescence quenching induced by charge transfer from PPE to nano-sized TiO₂ was observed in toluene solution. At high TiO₂ composition, a strong exciplex band occurred at 550 nm. Under prolonged light irradiation at 400 nm, unusual fluorescence gains took place at 460 nm, companied with a very small change in the UV–vis absorbance. After 30 min light irradiation, the fluorescence at 460 nm reached a maximum, but the peak at 550 nm disappeared. This composite showed amplified sensor response to TNT compared to the pristine PPE film, which can be potentially used as sensing material for detecting TNT based explosives.

Polymer coatings containing nano particles of zinc oxide for the UV protection of dyed polyester fabrics

The useful life of many outdoor textile products is limited by degradation caused by exposure to sunlight, in particular by the ultra violet component (below 400 nm). The degradation results in fading of colours and also loss of physical properties, such as tear strength and abrasion resistance. Degradation can be decreased with UV absorbers, often used in conjunction with antioxidants or free radical quenchers. The protection afforded by these organic compounds is, however, limited as they are ultimately destroyed by the UV radiation they absorb.
An alternative approach is to coat fabrics with a polymer containing an inorganic UV absorber, such as zinc oxide. The inherent stability of zinc oxide would be expected to provide a protective effect over a much longer period than can be achieved with an organic UV absorber. A possible disadvantage of zinc oxide when applied in a polymer film is that absorption and scattering of visible light can produce hazy films and, hence, an unacceptable change in fabric appearance.
This poster paper examines the possibility of using nano particles of zinc oxide dispersed in acrylic polymers for protecting dyed polyester fabrics against sunlight fading. Factors affecting both UV absorbance and film clarity will be discussed. The possibility will also be examined that the protective effect may be reduced in some circumstances by reactive oxygen species, generated by the interaction of UV with zinc oxide in the presence of air and water.

High performance liquid chromatography with two simultaneous on-line antioxidant assays : evaluation and comparison of espresso coffees

The antioxidant profiles of various espresso coffees were established using HPLC with UV-absorbance detection and two rapid, simultaneous, on-line chemical assays that enabled the relative reactivity of sample components to be screened. The assays were based on (i) the colour change associated with reduction of the 2,2´-diphenyl-1-picrylhydrazyl radical (DPPH•); and (ii) the emission of light (chemiluminescence) upon reaction with acidic potassium permanganate. Results from the two approaches were similar and reflected the complex array of antioxidant species present in the samples. However, some differences in selectivity were observed. Chromatograms generated with the chemiluminescence assay contained more peaks, which was ascribed to the greater sensitivity of the reagent towards minor, readily oxidisable sample components. The three coffee samples produced closely related profiles, signifying their fundamentally similar chemical compositions and origin. Nevertheless, the overall intensity and complexity of the samples in both UV absorption and antioxidant assay chromatograms were aligned with the manufacturers description of flavour intensity and character.

Symmetrically tapered <30-micron-thick quasi-planar Ge waveguides as chemical sensors for microanalysis

Symmetrically tapered planar IR waveguides have been fabricated by starting with a ZnS coated concave piece of single-crystal Ge, embedding it in an epoxide resin as a supporting substrate, and then grinding and polishing a planar surface until the thickness at the taper minimum is <30 μm. Such tapering is expected to enhance a waveguide's sensitivity as an evanescent wave sensor by maximizing the amount of evanescent wave energy present at the thinnest part of the waveguide. As predicted by theory, the surface sensitivity, i.e., the absorbance signal per molecule in contact with the sensing region, increases with decreasing thickness of the tapered region even while the total energy throughput decreases. The signal-to-noise ratio obtained depends very strongly on the quality of the polished surfaces of the waveguides. The surface sensitivity is superior to that obtained with a commercial Ge attenuated total reflection (ATR) accessory for several types of sample, including thin films (<10 ng) and small volumes (<1 μL) of volatile solvents. By using the waveguides, light-induced structural changes in the protein bacteriorhodopsin were observable using samples as small as ∼50 pmol (∼1 μg). In addition, the waveguide sensors can reveal the surface compositions on a single human hair, pointing to their promise as a tool for forensic fiber analysis.

UV absorption property of bamboo

This article describes ultra violet (UV) light shielding behaviour of Australian grown bamboo (Phyllostachys pubescens). Optical reflectance showed that untreated bamboo plant has UV absorption properties. To reveal the origin of the UV absorption property, its chemical components were extracted using several polar and non-polar solvents. The extracts in most of the polar and non-polar solvents showed UV absorption property. Protic polar solvents showed better ability to extract UV absorbing chemicals than aprotic and non-polar solvents, except hexane. The chemical components of bamboo were analysed by FT-IR spectroscopy and the findings were correlated with the UV absorbance characteristics. The results confirmed that the UV absorption ability of bamboo originates from nothing but lignin. It is thus indicated that the conventional methods to manufacture bamboo fibres, such as complete degumming or viscose methods, that involve the removal of lignin, cannot retain the unique UV absorption property of bamboo plant in bamboo fibres.

Novel approaches to process bamboo plants into fibres and their UV-blocking property

Currently viscose production methods are primarily used to process bamboo into commercial textile fibres. However, viscose methods use large quantities of chemicals and hence the process is not considered as environmentally friendly. The process also fails to retain bamboo’s inherent unique properties such as ultraviolet (UV) screening and antibacterial functions. Hence, it is necessary to design an effective and more eco-friendly manufacturing method that would also retain the unique properties of raw bamboo plant into the fibres. In this research, bamboo was processed using new methods involving thermo mechanical treatments such as ultra-sonication, shaker milling and boiling with continuous stirring. Sodium hydroxide, hydrogen peroxide, enzyme and water were used separately in this process and their effects on fibre processing were compared. The morphology and UV shielding ability were analysed before and after processing. It was demonstrated that bamboo can be processed into fibres using only water and ball milling without the aid of any hazardous chemicals. The combination of mild acid hydrolysis and ultrasonic treatment with hydrogen peroxide was effective in the fibre separation and provided better appearance of fibres.

In vitro testing of zinc oxide sunscreens

The UVA performances of two all-mineral zinc oxide sunscreens are measured following Colipa and ISO procedures and compared to a sunscreen containing only organic actives. It is found that the two sunscreen types yield very different in vitro SPF and UVA results. It shown that the results can be rationalized in terms of the differences in the monochromatic extinction spectra of the two types of sunscreens.