Antitumor activity of 3-ingenyl angelate: Plasma membrane and mitochondrial disruption and necrotic cell death

Options for skin cancer treatment currently include surgery, radiotherapy, topical chemotherapy, cryosurgery, curettage, and electrodes-sication. Although effective, surgery is costly and unsuitable for certain patients. Radiotherapy can leave a poor cosmetic effect, and current chemotherapy is limited by low cure rates and extended treatment schedules. Here, we describe the preclinical activity of a novel topical chemotherapeutic agent for the treatment of skin cancer, 3-ingenyl angelate (PEP005), a hydrophobic diterpene ester isolated from the plant Euphorbia peplus. Three daily topical applications of 42 nmol (18 mug) of PEP005 cured a series of s.c. mouse tumors (B16 melanoma, LK2 UV-induced squamous cell carcinoma, and Lewis lung carcinoma; it = >14 tumors/group) and human tumors (DO4 melanoma, HeLa cervical carcinoma, and PC3 and DU145 prostate carcinoma; it = >4 tumors/group) previously established (5-10 mm(3)) on C57BL/6 or Fox1(nu) mice. The treatment produced a mild, short-term erythema and eschar formation but, ultimately, resulted in excellent skin cosmesis. The LD90 for PEP005 for a panel of tumor cell lines was 180-220 muM. Electron microscopy showed that treatment with PEP005 both ill vitro (230 tot) and ill vivo (42 nmol) rapidly caused swelling of mitochondria and cell death by primary necrosis. Cr-51 release, uptake of propidium iodide, and staining with the mitochondria dye JC1, revealed that PEP005 (230 muM) treatment of tumor cells ill vitro resulted in a rapid plasma membrane perturbation and loss of mitochondrial membrane potential. PEP005 thus emerges as a new topical anti-skin cancer agent that has a novel mode of action involving plasma membrane and mitochondrial disruption and primary necrosis, ultimately resulting in an excellent cosmetic outcome.

Randomized trial of 8 Gy in 1 versus 20 Gy in 5 fractions of radiotherapy for neuropathic pain due to bone metastases (Trans-Tasman Radiation Oncology Group, TROG 96.05)

Background and purpose: Despite numerous randomized trials investigating radiotherapy (RT) fractionation schedules for painful bone metastases, there are very few data on RT for bone metastases causing pain with a neuropathic component. The Trans-Tasman Radiation Oncology Group undertook a randomized trial comparing the efficacy of a single 8 Gy (8/1) with 20 Gy in 5 fractions (20/5) for this type of pain. Materials and methods: Eligible patients had radiological evidence of bone metastases from a known malignancy with no change in systemic therapy within 6 weeks before or anticipated within 4 weeks after RT, no other metastases along the distribution of the neuropathic pain and no clinical or radiological evidence of cord/cauda equina compression. All patients gave written informed consent. Primary endpoints were pain response within 2 months of commencement of RT and time to treatment failure (TTF). The hypothesis was that 8/1 is at least as effective as 20/5 and the planned sample size was 270 patients. Results: Between February 1996 and December 2002, 272 patients were randomized (8/1:20/5 = 137:135) from 15 centres (Australia 11, New Zealand 3, UK 1). The commonest primary cancers were lung (31%), prostate (29%) and breast (8%); index sites were spine (89%), rib (9%), other (2%); 72% of patients were males and the median age was 67 (range 2989). The median overall survival (95% CI) for all randomized patients was 4.8 mo (4.2-5.7 mo). The intention-to-treat overall response rates (95% Cl) for 8/1 vs 20/5 were 53% (45-62%) vs 61% (53-70%), P = 0.18. Corresponding figures for complete response were 26% (18-34%) vs 27% (19-35%), P = 0.89. The estimated median TTFs (95% CI) were 2.4 mo (2.0-3.3 mo) vs 3.7 mo (3.1-5.9 mo) respectively. The hazard ratio (95% Cl) for the comparison of TTF curves was 1.35 (0.99-1.85), log-rank P = 0.056. There were no statistically significant differences in the rates of re-treatment, cord compression or pathological fracture by arm. Conclusions: 8/1 was not shown to be as effective as 20/5, nor was it statistically significantly worse. Outcomes were generally poorer for 8/1, although the quantitative differences were relatively small. (c) 2004 Elsevier Ireland Ltd. All rights reserved.

A Comparison of Methodologies from Two Longitudinal Community-Based Randomized Controlled Trials of Similar Interventions in Palliative Care: What Worked and What Did Not

Background: Methodological challenges such as recruitment problems and participant burden make clinical trials in palliative care difficult. In 2001-2004, two community-based randomized controlled trials (RCTs) of case conferences in palliative care settings were independently conducted in Australia-the Queensland Case Conferences trial (QCC) and the Palliative Care Trial (PCT). Design: A structured comparative study of the QCC and PCT was conducted, organized by known practical and organizational barriers to clinical trials in palliative care. Results: Differences in funding dictated study designs and recruitment success; PCT had 6 times the budget of QCC. Sample size attainment. Only PCT achieved the sample size goal. QCC focused on reducing attrition through gatekeeping while PCT maximized participation through detailed recruitment strategies and planned for significant attrition. Testing sustainable interventions. QCC achieved a higher percentage of planned case conferences; the QCC strategy required minimal extra work for clinicians while PCT superimposed conferences on normal work schedules. Minimizing participant burden. Differing strategies of data collection were implemented to reduce participant burden. QCC had short survey instruments. PCT incorporated all data collection into normal clinical nursing encounters. Other. Both studies had acceptable withdrawal rates. Intention-to-treat analyses are planned. Both studies included substudies to validate new outcome measures. Conclusions: Health service interventions in palliative care can be studied using RCTs. Detailed comparative information of strategies, successes and challenges can inform the design of future trials. Key lessons include adequate funding, recruitment focus, sustainable interventions, and mechanisms to minimize participant burden.

The diagnostic interview for psychoses (DIP): development, reliability and applications

Background. We describe the development, reliability and applications of the Diagnostic Interview for Psychoses (DIP), a comprehensive interview schedule for psychotic disorders. Method. The DIP is intended for use by interviewers with a clinical background and was designed to occupy the middle ground between fully structured, lay-administered schedules, and semi-structured., psychiatrist-administered interviews. It encompasses four main domains: (a) demographic data; (b) social functioning and disability; (c) a diagnostic module comprising symptoms, signs and past history ratings; and (d) patterns of service utilization Lind patient-perceived need for services. It generates diagnoses according to several sets of criteria using the OPCRIT computerized diagnostic algorithm and can be administered either on-screen or in a hard-copy format. Results. The DIP proved easy to use and was well accepted in the field. For the diagnostic module, inter-rater reliability was assessed on 20 cases rated by 24 clinicians: good reliability was demonstrated for both ICD-10 and DSM-III-R diagnoses. Seven cases were interviewed 2-11 weeks apart to determine test-retest reliability, with pairwise agreement of 0.8-1.0 for most items. Diagnostic validity was assessed in 10 cases, interviewed with the DIP and using the SCAN as 'gold standard': in nine cases clinical diagnoses were in agreement. Conclusions. The DIP is suitable for use in large-scale epidemiological studies of psychotic disorders. as well as in smaller Studies where time is at a premium. While the diagnostic module stands on its own, the full DIP schedule, covering demography, social functioning and service utilization makes it a versatile multi-purpose tool.

Population pharmacokinetics of itraconazole and its active metabolite hydroxy-itraconazole in paediatric cystic fibrosis and bone marrow transplant patients

Objective: The objective of the study was to characterise the population pharmacokinetic properties of itraconazole and its active metabolite hydroxyitraconazole in a representative paediatric population of cystic fibrosis and bone marrow transplant (BMT) patients and to identify patient characteristics influencing the pharmacokinetics of itraconazole. The ultimate goals were to determine the relative bioavailability between the two oral formulations (capsules vs oral solution) and to optimise dosing regimens in these patients. Methods: All paediatric patients with cystic fibrosis or patients undergoing BMT at The Royal Children's Hospital, Brisbane, QLD, Australia, who were prescribed oral itraconazole for the treatment of allergic bronchopulmonary aspergillosis (cystic fibrosis patients) or for prophylaxis of any fungal infection (BMT patients) were eligible for the study. Blood samples were taken from the recruited patients as per an empirical sampling design either during hospitalisation or during outpatient clinic visits. ltraconazole and hydroxy-itraconazole plasma concentrations were determined by a validated high-performance liquid chromatography assay with fluorometric detection. A nonlinear mixed-effect modelling approach using the NONMEM software to simultaneously describe the pharmacokinetics of itraconazole and its metabolite. Results: A one-compartment model with first-order absorption described the itraconazole data, and the metabolism of the parent drug to hydroxy-itraconazole was described by a first-order rate constant. The metabolite data also showed one-compartment characteristics with linear elimination. For itraconazole the apparent clearance (CLitraconazole) was 35.5 L/hour, the apparent volume of distribution (V-d(itraconazole)) was 672L, the absorption rate constant for the capsule formulation was 0.0901 h(-1) and for the oral solution formulation was 0.96 h-1. The lag time was estimated to be 19.1 minutes and the relative bioavailability between capsules and oral solution (F-rel) was 0.55. For the metabolite, volume of distribution, V-m/(F (.) f(m)), and clearance, CL/(F (.) fm), were 10.6L and 5.28 L/h, respectively. The influence of total bodyweight was significant, added as a covariate on CLitraconazoie/F and V-d(itraconazole)/F (standardised to a 70kg person) using allometric three-quarter power scaling on CLitraconazole/F, which therefore reflected adult values. The unexplained between-subject variability (coefficient of variation %) was 68.7%, 75.8%, 73.4% and 61.1% for CLitraconazoie/F, Vd(itraconazole)/F, CLm/(F (.) fm) and F-rel, respectively. The correlation between random effects of CLitraconazole and Vd((itraconazole)) was 0.69. Conclusion: The developed population pharmacokinetic model adequately described the pharmacokinetics of itraconazole and its active metabolite, hydroxy-itraconazole, in paediatric patients with either cystic fibrosis or undergoing BMT. More appropriate dosing schedules have been developed for the oral solution and the capsules to secure a minimum therapeutic trough plasma concentration of 0.5 mg/L for these patients.

Dual adaptation to two opposing visuomotor rotations when each is associated with different regions of workspace

Studies examining dual adaptation to opposing novel environments have yielded contradictory results, with previous evidence supporting both successful dual adaptation and interference leading to poorer adaptive performance. Whether or not interference is observed during dual adaptation appears to be dependent on the method used to allow the performer of the task to distinguish between two novel environments. This experiment tested if colour cues, a separation in workspace, and presentation schedule, could be used to distinguish between two opposing visuomotor rotations and enable dual adaptation. Through the use of a purpose designed manipulandum, each visuomotor rotation was either presented in the same region of workspace and associated with colour cues (Group 1), different regions of workspace in addition to colour cues (Groups 2 and 3) or different regions of workspace only (Groups 4 and 5). We also assessed the effectiveness of the workspace separation with both randomised and alternating presentation schedules (Groups 4 and 5). The results indicated that colour cues were not effective at enabling dual adaptation when each of the visuomotor rotations was associated with the same region of workspace. When associated with different regions of workspace, however, dual adaptation to the opposing rotations was successful regardless of whether colour cues were present or the type of presentation schedule.

Dosing of gentamicin in patients with end-stage renal disease receiving hemodialysis

The aim of this study was to evaluate dosing schedules of gentamicin in patients with end-stage renal disease and receiving hemodialysis. Forty-six patients were recruited who received gentamicin while on hemodialysis. Each patient provided approximately 4 blood samples at various times before and after dialysis for analysis of plasma gentamicin concentrations. A population pharmacokinetic model was constructed using NONMEM (version 5). The clearance of gentamicin during dialysis was 4.69 L/h and between dialysis was 0.453 L/h. The clearance between dialysis was best described by residual creatinine clearance (as calculated using the Cockcroft and Gault equation), which probably reflects both lean mass and residual clearance mechanisms. Simulation from the final population model showed that predialysis dosing has a higher probability of achieving target maximum concentration (C-max) concentrations (> 8 mg/L) within acceptable exposure limits (area under the concentration-time curve [AUC] values > 70 and < 120 mg.h/L per 24 hours) than postdialysis dosing.

A D-optimal designed population pharmacokinetic study of itraconazole capsules and solution in adults with cystic fibrosis

Background: Oral itraconazole (ITRA) is used for the treatment of allergic bronchopulmonary aspergillosis in patients with cystic fibrosis (CF) because of its antifungal activity against Aspergillus species. ITRA has an active hydroxy-metabolite (OH-ITRA) which has similar antifungal activity. ITRA is a highly lipophilic drug which is available in two different oral formulations, a capsule and an oral solution. It is reported that the oral solution has a 60% higher relative bioavailability. The influence of altered gastric physiology associated with CF on the pharmacokinetics (PK) of ITRA and its metabolite has not been previously evaluated. Objectives: 1) To estimate the population (pop) PK parameters for ITRA and its active metabolite OH-ITRA including relative bioavailability of the parent after administration of the parent by both capsule and solution and 2) to assess the performance of the optimal design. Methods: The study was a cross-over design in which 30 patients received the capsule on the first occasion and 3 days later the solution formulation. The design was constrained to have a maximum of 4 blood samples per occasion for estimation of the popPK of both ITRA and OH-ITRA. The sampling times for the population model were optimized previously using POPT v.2.0.[1] POPT is a series of applications that run under MATLAB and provide an evaluation of the information matrix for a nonlinear mixed effects model given a particular design. In addition it can be used to optimize the design based on evaluation of the determinant of the information matrix. The model details for the design were based on prior information obtained from the literature, which suggested that ITRA may have either linear or non-linear elimination. The optimal sampling times were evaluated to provide information for both competing models for the parent and metabolite and for both capsule and solution simultaneously. Blood samples were assayed by validated HPLC.[2] PopPK modelling was performed using FOCE with interaction under NONMEM, version 5 (level 1.1; GloboMax LLC, Hanover, MD, USA). The PK of ITRA and OH‑ITRA was modelled simultaneously using ADVAN 5. Subsequently three methods were assessed for modelling concentrations less than the LOD (limit of detection). These methods (corresponding to methods 5, 6 & 4 from Beal[3], respectively) were (a) where all values less than LOD were assigned to half of LOD, (b) where the closest missing value that is less than LOD was assigned to half the LOD and all previous (if during absorption) or subsequent (if during elimination) missing samples were deleted, and (c) where the contribution of the expectation of each missing concentration to the likelihood is estimated. The LOD was 0.04 mg/L. The final model evaluation was performed via bootstrap with re-sampling and a visual predictive check. The optimal design and the sampling windows of the study were evaluated for execution errors and for agreement between the observed and predicted standard errors. Dosing regimens were simulated for the capsules and the oral solution to assess their ability to achieve ITRA target trough concentration (Cmin,ss of 0.5-2 mg/L) or a combined Cmin,ss for ITRA and OH-ITRA above 1.5mg/L. Results and Discussion: A total of 241 blood samples were collected and analysed, 94% of them were taken within the defined optimal sampling windows, of which 31% where taken within 5 min of the exact optimal times. Forty six per cent of the ITRA values and 28% of the OH-ITRA values were below LOD. The entire profile after administration of the capsule for five patients was below LOD and therefore the data from this occasion was omitted from estimation. A 2-compartment model with 1st order absorption and elimination best described ITRA PK, with 1st order metabolism of the parent to OH-ITRA. For ITRA the clearance (ClItra/F) was 31.5 L/h; apparent volumes of central and peripheral compartments were 56.7 L and 2090 L, respectively. Absorption rate constants for capsule (kacap) and solution (kasol) were 0.0315 h-1 and 0.125 h-1, respectively. Comparative bioavailability of the capsule was 0.82. There was no evidence of nonlinearity in the popPK of ITRA. No screened covariate significantly improved the fit to the data. The results of the parameter estimates from the final model were comparable between the different methods for accounting for missing data, (M4,5,6)[3] and provided similar parameter estimates. The prospective application of an optimal design was found to be successful. Due to the sampling windows, most of the samples could be collected within the daily hospital routine, but still at times that were near optimal for estimating the popPK parameters. The final model was one of the potential competing models considered in the original design. The asymptotic standard errors provided by NONMEM for the final model and empirical values from bootstrap were similar in magnitude to those predicted from the Fisher Information matrix associated with the D-optimal design. Simulations from the final model showed that the current dosing regimen of 200 mg twice daily (bd) would provide a target Cmin,ss (0.5-2 mg/L) for only 35% of patients when administered as the solution and 31% when administered as capsules. The optimal dosing schedule was 500mg bd for both formulations. The target success for this dosing regimen was 87% for the solution with an NNT=4 compared to capsules. This means, for every 4 patients treated with the solution one additional patient will achieve a target success compared to capsule but at an additional cost of AUD $220 per day. The therapeutic target however is still doubtful and potential risks of these dosing schedules need to be assessed on an individual basis. Conclusion: A model was developed which described the popPK of ITRA and its main active metabolite OH-ITRA in adult CF after administration of both capsule and solution. The relative bioavailability of ITRA from the capsule was 82% that of the solution, but considerably more variable. To incorporate missing data, using the simple Beal method 5 (using half LOD for all samples below LOD) provided comparable results to the more complex but theoretically better Beal method 4 (integration method). The optimal sparse design performed well for estimation of model parameters and provided a good fit to the data.