Called versus Calculated Yield Grades

An evaluation of carcass data collected over a two year period from southwest Iowa steer tests and 4-H carcass shows was conducted to compare USDA yield grades called by the Federal grader to yield grades calculated by actual carcass measurements. A regression equation was developed to predict called yield grade from carcass measurements. A comparison of the generated equation with the USDA equation used in calculating yield grades suggest that USDA graders accurately predict preliminary yield grades based on fat thickness, but may not have adequate time at line speeds to fully account for adjustments in ribeye size relative to carcass weight.

Effects of dietary vitamin A concentration of roasted soybean inclusion on marbling, adipose cellularity, and fatty acid composition of beef

A feedlot trial was conducted to determine the effect of dietary vitamin A concentration and roasted soybean (SB) inclusion on carcass characteristics, adipose tissue cellularity, and muscle fatty acid composition. Angus-crossbred steers (n = 168; 295 +/- 1.8 kg) were allotted to 24 pens (7 steers each). Four treatments, in a 2 x 2 factorial arrangement, were investigated: no supplemental vitamin A, no roasted soybeans (NANS); no vitamin A, roasted SB (20% of the diet on a DM basis; NASB); with supplemental (2,700 IU/kg) vitamin A, no roasted SB (WANS); and with supplemental vitamin A, roasted SB (WASB). Diets included high moisture corn, 5% corn silage, 10 to 20% supplement, and 20% roasted SB in the SB treatments on a DM basis. The calculated vitamin A concentration in the basal diet was < 1,300 IU/kg of DM. Blood samples (2 steers/pen) were collected for serum vitamin A determination. Steers were slaughtered after 168 d on feed. Carcass characteristics and LM composition were determined. Fatty acid composition of LM was analyzed, and adipose cellularity in the i.m. and s.c. depots was determined. No vitamin A x SB interactions were detected (P > 0.10) for cattle performance, carcass composition, or muscle fatty acid composition. Low vitamin A diets (NA) did not affect (P > 0.05) ADG, DMI, or G:F. Quality grade tended (P = 0.07) to be greater in NA steers. Marbling scores and the percentage of carcasses grading > or = Choice(-) were 10% greater for NA steers, although these trends were not significant (P = 0.11 and 0.13, respectively). Backfat thickness and yield grade were not affected (P > 0.26) by vitamin A supplementation. Composition of the LM was not affected (P > 0.15) by vitamin A or SB supplementation. Serum retinol at slaughter was 44% lower (P < 0.01) for steers fed NA than for steers supplemented with vitamin A (23.0 vs. 41.1 microg/dL). A vitamin A x SB interaction occurred (P < 0.05) for adipose cellularity in the i.m. depot; when no SB was fed, vitamin A supplementation decreased cell density and increased cell size. However, when SB was fed, vitamin A supplementation did not affect adipose cellularity. Adipose cellularity at the s.c. depot was not affected (P > 0.18) by vitamin A or SB treatments. Fatty acid profile of the LM was not affected by vitamin A (P > 0.05), but SB increased (P < 0.05) PUFA (7.88 vs. 4.30 g/100 g). It was concluded that feeding NA tended to increase marbling without affecting back-fat and yield grade. It appeared that NA induced hyperplasia in the i.m. but not in the s.c. fat depot.

Effect of dietary vitamin A restriction on marbling and conjugated-linoleic acid (CLA) content in Holstein steers

To determine the effect of duration of dietary vitamin A restriction on site of fat deposition in growing cattle, 60 Holstein steers (BW = 218.4 ± 6.55 kg) were fed a diet based on high-moisture corn with 2,200 IU supplemental vitamin A/kg DM (C) or no supplemental vitamin A for a long (243 d; LR) or short (131 d; SR) restriction prior to harvest at 243 d. The SR steers were fed the C diet for the first 112 d. Steers were penned individually and fed for ad libitum intake. Jugular vein blood samples for serum retinol analysis were collected on d 1, 112, and 243. Carcass samples were collected for composition analysis. Subcutaneous fat samples were collected for fatty acid composition. Fat samples from the i.m. and s.c. depot were collected to measure adipocyte size and density. Feedlot performance (ADG, DMI, and G:F) was not affected (P > 0.05) by vitamin A restriction. On d 243, the i.m. fat content of the LM was 33% greater (P < 0.05) for LR than for SR and C steers (5.6 vs. 3.9 and 4.2% ether extract, respectively). Depth of back fat and KPH percentage were not affected (P = 0.44 and 0.80, respectively) by vitamin A restriction. Carcass weight, composition of edible carcass, and yield grade were similar among treatments (P > 0.10). Liver retinol (LR = 6.1, SR = 6.5, and C = 44.7 µg/g; P < 0.01) was reduced in LR and SR vs. C steers. On d 243, LR and SR steers had similar serum retinol concentrations, and these were lower (P < 0.01) than those of C steers (LR = 21.2, SR = 25.2, and C = 36.9 µg/dL). Intramuscular adipose cellularity (adipocyte/mm2 and mean adipocyte diameter) on d 112 and d 243 was not affected (P > 0.10) by vitamin A restriction. Restricting vitamin A intake for 243 d increased i.m fat percentage without affecting s.c. or visceral fat deposition, feedlot performance, or carcass weight. Restricting vitamin A intake for 131 d at the end of the finishing period appears to be insufficient to affect the site of fat deposition in Holstein steers.

Ultra-sonografia para predição da composição da carcaça de bovinos jovens

Neste estudo, avaliou-se a utilização da ultra-sonografia como técnica para predição da composição da carcaça de 115 bovinos jovens (Nelore, ½ Angus Nelore, ½ Simental Nelore e Canchim), com peso inicial médio de 329 kg, de dois tamanhos à maturidade (pequeno e grande), criados no sistema de produção do novilho superprecoce. Após 120 dias de confinamento, foram realizadas a pesagem e a medida da área de olho-de-lombo (AOL) e da gordura subcutânea (ECG), via ultra-sonografia. Após o abate, foram registradas as medidas de AOL e ECG na carcaça, os pesos de traseiro, dianteiro, cortes cárneos comerciais e a composição corporal dos animais. Foram calculados os rendimentos de carcaça, de cortes cárneos e de traseiro, não se observando diferença na composição entre os dois grupos de tamanho à maturidade, provavelmente em razão da pequena variação entre eles. Embora a ultra-sonografia não tenha apresentado alta precisão na predição da musculosidade da carcaça e do rendimento de cortes cárneos, os coeficientes de determinação das equações de predição da composição da carcaça foram semelhantes, e algumas vezes superiores (quantidade de ossos), aos obtidos nas equações em que se utilizaram as medidas na carcaça após o abate, demonstrando que a ultra-sonografia pode ser utilizada para predição da composição da carcaça de bovinos de corte em determinadas situações.

Influência materna nas caracteristicas morfológicas de ovários e testículos de fetos bovinos da raça Nelore

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Potential Economic Returns from Selling Beef in a Specified Value-Based Market

Three groups of steers--one theoretical group and two experimental groups—were evaluated for marketing cattle live, as boxed beef, and grade and yield when the live price was $71 to $73/cwt, grade and yield price $125/cwt for Choice yield grade 3 carcasses with $20/cwt discount for Select carcasses, and in a commodity-trim or close-trim boxed beef market. The results show that the value of highyielding steers can be significantly increased if sold in a close-trim boxed beef market. The close-trim premiums ranged from $5.06 per head for Select close-trim yield grade 4 carcasses to $87.18 per head for close-trim Choice yield grade 1 carcasses. A group of experimental steers averaging 82% Choice and 60% yield grades 1 and 2 returned an additional $104 in the close-trim boxed market compared with selling live for $73/cwt. Another group of experimental steers averaging 21% Choice, 18% Standard, and 93% yield grades 1 and 2 had $29 per head greater return than if the steers had been sold live for $71/cwt. These comparisons emphasize the importance of knowing how cattle will potentially grade before selecting an alternative marketing strategy. This prior knowledge is most important when the spread in price between Choice and Select is high. Producers need to learn more about their cattle to predict how the cattle may grade for a specified value-based market.

Effects of Sorting Steer Calves on Feedlot Performance and Carcass Value

Three groups of steer calves totaling 480 head were sorted into smaller and larger frame sizes, and those groups were sorted into groups with more and less backfat. There was no difference in age among the four sorted groups. The larger steers and steers with less fat had faster rates of gain and tended to have superior feed efficiencies. Steers with more initial fat were fed fewer days. The larger framed steers and steers with less fat had heavier carcasses, less carcass backfat, more yield grade 1 carcasses and a lower percentage of Choice carcasses, but they also had greater value per carcass when evaluated using a grid paying premiums for quality and yield grades. The greatest profit to the feedyard was realized from the smaller framed steers and those with less initial backfat. For similar profit it was calculated that the larger steers should have been discounted as feeders $3.50 per hundred compared with the smaller steers and the steers with more fat discounted $5.00 per hundred compared with those having less initial fat. The results of this study suggest that sorting based on initial fat thickness may have more potential for enhancing the value of finished cattle than sorting based on frame score.

The Effect on Meat Quality of Integrating Pasturing Systems into Cattle Finishing Programs

The effect on meat quality of integrating pasturing systems into cattle finishing programs was observed over a two-year period. Year one consisted of 84 fall born calves and 28 spring born calves and year two consisted of 116 fall born calves. The effect of using Rumensinâ for cattle on bromegrass pasture was incorporated into year one. In year two cattle on pasture received bromegrass pasture, and one treatment group received switchgrass during the warm season. In both years there was a control group of calves that went directly to the feedlot with the remaining calves going to pasture for varying periods of time before being finished in drylot. At the conclusion of the feeding trial, cattle were processed into beef, and a ribeye steak was removed from each carcass for sensory evaluation. In year one cattle that were on pasture the longest had the lowest (P<0.05) average quality grades. In year two this trend was reversed, and cattle placed directly into drylot had the lowest (P<0.05) average quality grades. In both years cattle carcasses in all treatments averaged yield grade 2. Warner Bratzler shear force values were not affected by treatments. Sensory panel evaluations indicated tenderness was unaffected by treatments, and in year two flavor and flavor intensity were unaffected by treatments. In year one flavor intensity was lowest (P<0.05) for steaks derived from cattle that were on pasture the longest and received Rumensinâ. Inclusion of Rumensinâ for cattle on pasture did not influence yield and quality grades or affect tenderness, juiciness, and flavor. Results of this study indicate that steer calves placed on cool and warm season pastures prior to being finished in drylot, can produce carcasses with acceptable yield and quality grades and that the meat eating qualities will be largely unaffected by the inclusion of pasture.

Effect of Frame Size and Hormone Implant on Performance and Carcass Characteristics of Finishing Yearling Heifers: Returns to a Value-Based Market

Four groups of yearling heifers representing different frame sizes—small, medium, and large Angus and medium Simmental—were fed high-grain finishing diets to average Low Choice quality grade. Half the heifers were implanted with estrogen and trenbolone acetate. Backfat and ribeye area were measured by ultrasound four times during the study to assess growth of muscle and fat. Increasing frame size resulted in increased feed intake, greater rates of gain, and a trend towards reduced feed conversion. Greater returns would have been realized from each of the four groups had they been sold in a premium market based on yield grade rather than the conventional grade and yield market. Increasing frame size resulted in greater returns to the value-based market. Implants increased rate of gain and improved feed conversion but did not result in significantly greater returns to the value-based market compared with the grade and yield market. Ribeye area and backfat increased with body weight and time on feed. Increase in ribeye area was linear with time, whereas accumulation of backfat was exponential. Rate of increase in area of ribeye tended to increase and backfat tended to decrease as frame size increased. Implants increased rate of increase in ribeye area but had no effect on rate of deposition of subcutaneous fat. Equations describing growth of ribeye area and backfat for each group predicted average growth for the heifers but did not predict growth of individual heifers. Final carcass yield grade was related to initial thickness of backfat but not to initial ribeye area. These results indicate that the type of cattle selected to be fed for a premium market based on yield grade is important to the success of the program. More work is needed to develop growth equations from ultrasound measurements, but ultrasound will likely be a useful tool in selecting feeder cattle for a value-based market.

Use of Ultrasound Backfat Estimates to Form Marketing Groups Prior to Finishing for Feedlot Steers

An experiment was conducted using 95 Continental crossbred steers. The cattle were sorted by ultrasound 160 days before slaughter into a low backfat group (Low BF) and a higher backfat group (High BF). Half of the Low BF and half of the High BF were implanted whereas the other halves were not. Data from the experiment were used in two hypothetical markets. One market was a high yield beef program (HY) that did not allow the use of implants. The second market was a commodity beef program (CM) that allowed the use of implants. The cattle were priced as an unsorted group (ALL) and two sorted groups (Low BF and High BF) within the HY (non-implanted) and CM (implanted) markets. The CM program had a base price of $1.05/lb hot carcass weight (HCW) with a $0.15/lb HCW discount for quality grade (QG) Select and a $0.20/lb HCW discount for yield grade (YG) 4. The HY program used a base price of $1.07/lb HCW with premiums ($/lb HCW) paid for YG £ .9 (.15), 1.0 - 1.4 (.10), and 1.5 - 1.9 (.03). The carcasses were discounted ($/lb HCW) for YG 2.5 - 2.9 (.03), 3.0 - 3.9 (.15), and ³ 4.0 (.35). This data set provides good evidence that the end point at which to sell a group of cattle depends on the particular market. Sorting had an economic advantage over ALL in the HY Low BF and the CM High BF groups. The HY High BF cattle should have been sold sooner due to the discounts recieved for increased YG. The increased YG was directly affected by an increase in BF. Furthermore, the CM Low BF group should have been fed longer to increase the number of carcasses grading Choice.

Integration of Pasturing Systems for Cattle Finishing Programs

A 3-year study, using 84 fall-born and 28 spring-born calves of similar genotypes, was conducted to integrate pasturing systems with drylot feeding systems. Calves were started on test following weaning in May and October. Seven treatments were imposed: 1) fall-born calves directly into feedlot; 2 and 3) fall-born calves put on pasture with or without ionophore and moved to the feedlot at the end of July; 4 and 5) fall-born calves put on pasture with or without ionophore and moved to the feedlot at the end of October; 6 and 7) spring-born calves put on pasture with or without ionophore and moved to the feedlot at the end of October. A bromegrass pasture consisting of 16 paddocks, each 1.7 acre in size, was available. Each treatment group had access to 1 paddock at a time and was rotated at approximately 3-day intervals. In the feedlot, steers were provided an 82% concentrate diet containing whole-shelled corn, ground alfalfa hay, and a protein, vitamin and mineral supplement containing ionophore and molasses. As pens of cattle reached about 1150 lb. average live weight, they were processed and carcass traits were evaluated. Pasture daily gains were highest for cattle on pasture for the longest duration (P < .03), and overall daily gains were highest for drylot cattle (P < .01) and decreased with increased time spent on pasture. Although differences among treatments existed in numerical scores for yield and quality grades (P < .05 and P < .03, respectively), all treatments provided average yield grade scores of 2 and quality grades of low Choice or higher. Use of four production costs and pricing scenarios revealed that fall-born calves placed on pasture for varying lengths of time were the most profitable (P < .04) among the treatments. Furthermore, employing a 5% price sensitivity analysis, indicated that fed-cattle selling price had great impact on profit potential and was followed in importance by feeder purchase price and corn grain price. Overall, these findings should provide significant production alternatives for some segments of the cattle feeding industry and also lend substantial credence to the concept of sustainable agriculture.

Integration of Pasturing Systems for Cattle Finishing Programs: A Progress Report

A three-year study was conducted to integrate pasturing systems with drylot feeding systems. Each year 84 fall-born and 28 spring-born calves of similar genotypes were used. Fall-born calves were started on test in May, and spring-born calves were started in October. Seven treatments were imposed: 1) fall-born calves directly into the feedlot (28 steers); 2 and 3) fall-born calves put on pasture with or without an ionophore and moved to the feedlot at the end of July (14 steers in each treatment); 4 and 5) fall-born calves put on pasture with or without an ionophore and moved to the feedlot at the end of October (14 steers in each treatment); and 6 and 7) spring-born calves put on pasture with or without an ionophore and moved to the feedlot at the end of October (14 steers in each treatment). Cattle on pasture receiving an ionophore gained faster (P=.009), but lost this advantage in drylot (P>.10). Overall, cattle started directly in the feedlot had higher gains (P<.001). Cattle receiving an ionophore on pasture had lower KPH than those that did not receive an ionophore (P<.01). Treatment influenced yield grade (P<0.001), although all treatments were YG 2. The percentage of cattle grading Prime and Choice was 75 % or higher for all treatment groups. The results show that using an ionophore improved pasture gains and that pasture treatments did not adversely influence yield and quality grades.

A Historical Review of the 4-H Beef of Merit Carcass Contest at the Iowa State Fair

A total of 1,033 head of steers competing in the Iowa State Fair Beef of Merit class from 1975 through 2000 were summarized. Those grading low Choice and higher averaged 55.4 percent, and the average yield grade was 2.44. Due to rule changes over time the quality grade and cutability shifted. In recent years with the emphasis placed on acceptable quality grade and carcass weight, the BOM cattle have improved dramatically in the percent grading Prime and upper Choice. However, with this change has been a reduction in the percent of cattle making yield grade 1 and 2. Growth rate increased through the late 1980s, but has remained static since that time.

Screening of Food Grade Lipases to be Used in Esterification and Interesterification Reactions of Industrial Interest

Seven food grade commercially available lipases were immobilized by covalent binding on polysiloxane-polyvinyl alcohol (POS-PVA) hybrid composite and screened to mediate reactions of industrial interest. The synthesis of butyl butyrate and the interesterification of tripalmitin with triolein were chosen as model reactions. The highest esterification activity (240.63 mu M/g min) was achieved by Candida rugosa lipase, while the highest interesterification yield (31%, in 72 h) was achieved by lipase from Rhizopus oryzae, with the production of about 15 mM of the triglycerides C(50) and C(52). This lipase also showed a good performance in butyl butyrate synthesis, with an esterification activity of 171.14 mu M/g min. The results demonstrated the feasibility of using lipases from C. rugosa for esterification and R. oryzae lipase for both esterification and interesterification reactions.

An 40Ar/39Ar, Rb/Sr, and stable isotope study of micas in low-grade fold-and-thrust belt: An example from the Swiss Helvetic Alps

White micas in carbonate-rich tectonites and a few other rock types of large thrusts in the Swiss Helvetic fold-and-thrust belt have been analyzed by Ar-40/Ar-39 and Rb/Sr techniques to better constrain the timing of Alpine deformation for this region. Incremental Ar-40/Ar-39 heating experiments of 25 weakly metamorphosed (anchizone to low greenschist) samples yield plateau and staircase spectra. We interpret most of the staircase release spectra result from variable mixtures of syntectonic (neoformed) and detrital micas. The range in dates obtained within individual spectra depends primarily on the duration of mica nucleation and growth, and relative proportions of neoformed and detrital mica. Rb/Sr analyses of 12 samples yield dates of ca. 10-39 Ma (excluding one anomalously young sample). These dates are slightly younger than the Ar-40/Ar-39 total gas dates obtained for the same samples. The Rb/ Sr dates were calculated using initial Sr-87/Sr-86 ratios obtained from the carbonate-dominated host rocks, which are higher than normal Mesozoic carbonate values due to exchange with fluids of higher Sr-87/Sr-86 ratios (and lower O-18/O-16 ratios). Model dates calculated using Sr-87/Sr-86 values typical of Mesozoic marine carbonates more closely approximate the Ar-40/Ar-39 total gas dates for most of the samples. The similarities of Rb/Sr and Ar-40/Ar-39 total gas dates are consistent with limited amounts of detrital mica in the samples. The delta(18)O values range from 24-15%. (VSMOW) for 2-6 mum micas and 27-16parts per thousand for the carbonate host rocks. The carbonate values are significantly lower than their protolith values due to localized fluid-rock interaction and fluid flow along most thrust surfaces. Although most calcite-mica pairs are not in oxygen isotope equilibrium at temperatures of ca. 200-400 degreesC, their isotopic fractionations are indicative of either 1) partial exchange between the minerals and a common external fluid, or 2) growth or isotopic exchange of the mica with the carbonate after the carbonate had isotopically exchanged with an external fluid. The geological significance of these results is not easily or uniquely determined, and exemplifies the difficulties inherent in dating very fine-grained micas of highly deformed tectonites in low-grade metamorphic terranes. Two generalizations can be made regarding the dates obtained from the Helvetic thrusts: 1) samples from the two highest thrusts (Mt. Gond and Sublage) have all of their Ar-40/Ar-39 steps above 20 Ma, and 2) most samples from the deepest Helvetic thrusts have steps (often accounting for more than 80% of Ar-39 release) between 15 and 25 Ma. These dates are consistent with the order of thrusting in the foreland-imbricating system and increase proportions of neoformed to detrital mica in the more metamorphosed hinterland and deeply buried portions of the nappe pile. Individual thrusts accommodated the majority of their displacement during their initial incorporation into the foreland-imbricating system, and some thrusts remained active or were reactivated down to 15 Ma.