Flow field analysis of some mixing and conveying screw element regions, within a closely intermeshing, co-rotating twin-screw extruder.

Grafting of antioxidants and other modifiers onto polymers by reactive extrusion, has been performed successfully by the Polymer Processing and Performance Group at Aston University. Traditionally the optimum conditions for the grafting process have been established within a Brabender internal mixer. Transfer of this batch process to a continuous processor, such as an extruder, has, typically, been empirical. To have more confidence in the success of direct transfer of the process requires knowledge of, and comparison between, residence times, mixing intensities, shear rates and flow regimes in the internal mixer and in the continuous processor.The continuous processor chosen for the current work in the closely intermeshing, co-rotating twin-screw extruder (CICo-TSE). CICo-TSEs contain screw elements that convey material with a self-wiping action and are widely used for polymer compounding and blending. Of the different mixing modules contained within the CICo-TSE, the trilobal elements, which impose intensive mixing, and the mixing discs, which impose extensive mixing, are of importance when establishing the intensity of mixing. In this thesis, the flow patterns within the various regions of the single-flighted conveying screw elements and within both the trilobal element and mixing disc zones of a Betol BTS40 CICo-TSE, have been modelled using the computational fluid dynamics package Polyflow. A major obstacle encountered when solving the flow problem within all of these sets of elements, arises from both the complex geometry and the time-dependent flow boundaries as the elements rotate about their fixed axes. Simulation of the time dependent boundaries was overcome by selecting a number of sequential 2D and 3D geometries, used to represent partial mixing cycles. The flow fields were simulated using the ideal rheological properties of polypropylene and characterised in terms of velocity vectors, shear stresses generated and a parameter known as the mixing efficiency. The majority of the large 3D simulations were performed on the Cray J90 supercomputer situated at the Rutherford-Appleton laboratories, with pre- and postprocessing operations achieved via a Silicon Graphics Indy workstation. A mechanical model was constructed consisting of various CICo-TSE elements rotating within a transparent outer barrel. A technique has been developed using coloured viscous clays whereby the flow patterns and mixing characteristics within the CICo-TSE may be visualised. In order to test and verify the simulated predictions, the patterns observed within the mechanical model were compared with the flow patterns predicted by the computational model. The flow patterns within the single-flighted conveying screw elements in particular, showed good agreement between the experimental and simulated results.

Reliability analysis for hazard and operability studies

Fault tree analysis is used as a tool within hazard and operability (Hazop) studies. The present study proposes a new methodology for obtaining the exact TOP event probability of coherent fault trees. The technique uses a top-down approach similar to that of FATRAM. This new Fault Tree Disjoint Reduction Algorithm resolves all the intermediate events in the tree except OR gates with basic event inputs so that a near minimal cut sets expression is obtained. Then Bennetts' disjoint technique is applied and remaining OR gates are resolved. The technique has been found to be appropriate as an alternative to Monte Carlo simulation methods when rare events are countered and exact results are needed. The algorithm has been developed in FORTRAN 77 on the Perq workstation as an addition to the Aston Hazop package. The Perq graphical environment enabled a friendly user interface to be created. The total package takes as its input cause and symptom equations using Lihou's form of coding and produces both drawings of fault trees and the Boolean sum of products expression into which reliability data can be substituted directly.

Computer aided design and manufacture of form-rolls

Cold roll forming of thin-walled sections is a very useful process in the sheet metal industry. However, the conventional method for the design and manufacture of form-rolls, the special tooling used in the cold roll forming process, is a very time consuming and skill demanding exercise. This thesis describes the establishment of a stand-alone minicomputer based CAD/CAM system for assisting the design and manufacture of form-rolls. The work was undertaken in collaboration with a leading manufacturer of thin-walled sections. A package of computer programs have been developed to provide computer aids for every aspect of work in form-roll design and manufacture. The programs have been successfully implemented, as an integrated CAD/CAM software system, on the ICL PERQ minicomputer with graphics facilities. Thus, the developed CAD/CAM system is a single-user workstation, with software facilities to help the user to perform the conventional roll design activities including the design of the finished section, the flower pattern, and the form-rolls. A roll editor program can then be used to modify, if required, the computer generated roll profiles. As far as manufacturing is concerned, a special-purpose roll machining program and postprocessor can be used in conjunction to generate the NC control part-programs for the production of form-rolls by NC turning. Graphics facilities have been incorporated into the CAD/CAM software programs to display drawings interactively on the computer screen throughout all stages of execution of the CAD/CAM software. It has been found that computerisation can shorten the lead time in all activities dealing with the design and manufacture of form-rolls, and small or medium size manufacturing companies can gain benefits from the CAD/CM! technology by developing, according to its own specification, a tailor-made CAD/CAM software system on a low cost minicomputer.

The application of parallel processing methods to vibrational analysis

The trend in modal extraction algorithms is to use all the available frequency response functions data to obtain a global estimate of the natural frequencies, damping ratio and mode shapes. Improvements in transducer and signal processing technology allow the simultaneous measurement of many hundreds of channels of response data. The quantity of data available and the complexity of the extraction algorithms make considerable demands on the available computer power and require a powerful computer or dedicated workstation to perform satisfactorily. An alternative to waiting for faster sequential processors is to implement the algorithm in parallel, for example on a network of Transputers. Parallel architectures are a cost effective means of increasing computational power, and a larger number of response channels would simply require more processors. This thesis considers how two typical modal extraction algorithms, the Rational Fraction Polynomial method and the Ibrahim Time Domain method, may be implemented on a network of transputers. The Rational Fraction Polynomial Method is a well known and robust frequency domain 'curve fitting' algorithm. The Ibrahim Time Domain method is an efficient algorithm that 'curve fits' in the time domain. This thesis reviews the algorithms, considers the problems involved in a parallel implementation, and shows how they were implemented on a real Transputer network.

Evaluation of the auto-refraction function of the Nidek OPD-Scan III

Background: The aim was to evaluate the validity and repeatability of the auto-refraction function of the Nidek OPD-Scan III (Nidek Technologies, Gamagori, Japan) compared with non-cycloplegic subjective refraction. The Nidek OPD-Scan III is a new aberrometer/corneal topographer workstation based on the skiascopy principle. It combines a wavefront aberrometer, topographer, autorefractor, auto keratometer and pupillometer/pupillographer. Methods: Objective refraction results obtained using the Nidek OPD-Scan III were compared with non-cycloplegic subjective refraction for 108 eyes of 54 participants (29 female) with a mean age of 23.7±9.5 years. Intra-session and inter-session variability were assessed on 14 subjects (28 eyes). Results: The Nidek OPD-Scan III gave slightly more negative readings than results obtained by subjective refraction (Nidek mean difference -0.19±0.36 DS, p<0.01 for sphere; -0.19±0.35 DS, p<0.01 for mean spherical equivalent; -0.002±0.23 DC, p=0.91 for cylinder; -0.06±0.38 DC, p=0.30 for J0 and -0.36±0.31 DC for J45, p=0.29). Auto-refractor results for 74 per cent of spherical readings and 60 per cent of cylindrical powers were within±0.25 of subjective refraction. There was high intra-session and inter-session repeatability for all parameters; 90 per cent of inter-session repeatability results were within 0.25 D. Conclusion: The Nidek OPD-Scan III gives valid and repeatable measures of objective refraction when compared with non-cycloplegic subjective refraction. © 2013 The Authors. Clinical and Experimental Optometry © 2013 Optometrists Association Australia.

A novel 3-D segmentation algorithm for anatomic liver and tumor volume calculations for liver cancer treatment planning

Three-Dimensional (3-D) imaging is vital in computer-assisted surgical planning including minimal invasive surgery, targeted drug delivery, and tumor resection. Selective Internal Radiation Therapy (SIRT) is a liver directed radiation therapy for the treatment of liver cancer. Accurate calculation of anatomical liver and tumor volumes are essential for the determination of the tumor to normal liver ratio and for the calculation of the dose of Y-90 microspheres that will result in high concentration of the radiation in the tumor region as compared to nearby healthy tissue. Present manual techniques for segmentation of the liver from Computed Tomography (CT) tend to be tedious and greatly dependent on the skill of the technician/doctor performing the task. ^ This dissertation presents the development and implementation of a fully integrated algorithm for 3-D liver and tumor segmentation from tri-phase CT that yield highly accurate estimations of the respective volumes of the liver and tumor(s). The algorithm as designed requires minimal human intervention without compromising the accuracy of the segmentation results. Embedded within this algorithm is an effective method for extracting blood vessels that feed the tumor(s) in order to plan effectively the appropriate treatment. ^ Segmentation of the liver led to an accuracy in excess of 95% in estimating liver volumes in 20 datasets in comparison to the manual gold standard volumes. In a similar comparison, tumor segmentation exhibited an accuracy of 86% in estimating tumor(s) volume(s). Qualitative results of the blood vessel segmentation algorithm demonstrated the effectiveness of the algorithm in extracting and rendering the vasculature structure of the liver. Results of the parallel computing process, using a single workstation, showed a 78% gain. Also, statistical analysis carried out to determine if the manual initialization has any impact on the accuracy showed user initialization independence in the results. ^ The dissertation thus provides a complete 3-D solution towards liver cancer treatment planning with the opportunity to extract, visualize and quantify the needed statistics for liver cancer treatment. Since SIRT requires highly accurate calculation of the liver and tumor volumes, this new method provides an effective and computationally efficient process required of such challenging clinical requirements.^

Children's Postures While Playing at Computer Workstations

There has been a significant increase in the incidence of musculoskeletal disorders (MSD) and the costs associated with these are predicted to increase as the popularity of computer use increases at home, school and work. Risk factors have been identified in the adult population but little is known about the risk factors for children and youth. Research has demonstrated that they are not immune to this risk and that they are self reporting the same pain as adults. The purpose of the study was to examine children’s postures while working at computer workstations under two conditions. One was at an ergonomically adjusted children’s workstation while the second was at an average adult workstation. A Polhemus Fastrak™ system was used to record the children’s postures and joint and segment angles were quantified. Results of the study showed that children reported more discomfort and effort at the adult workstation. Segment and joint angles showed significant differences through the upper limb at the adult workstation. Of significance was the strategy of shoulder abduction and flexion that the children used in order to place their hand on the mouse. Ulnar deviation was also greater at the adult workstation as was neck extension. All of these factors have been identified in the literature as increasing the risk for injury. A comparison of the children’s posture while playing at the children’s workstation verses the adult workstation, showed that the postural angles assumed by the children at an adult workstation exceeded the Occupational Safety and Health Association (OSHA) recommendations. Further investigation is needed to increase our knowledge of MSD in children as their potential for long term damage has yet to be determined.

Progetto e sviluppo di un banco di prova per sistemi di determinazione e controllo d'assetto di CubeSat

Progettazione di dettaglio di un banco di prova per testare sistemi ADCS per CubeSat: Alma Test-Bed. Ci si è concentrati sul progetto di un primo nucleo di AlmaTB in grado di testare il controllo di tipo magnetico. Fanno parte di AlmaTB una gabbia di Helmholtz, un air-bearing system, un CubeSat di test, un metrology system. La gabbia di Helmholtz è un apparato costituito da tre coppie di bobine, una per ogni asse spaziale, che serve ad annullare il campo magnetico locale e simulare quello che si troverà in orbita attorno alla Terra. Un software ricava i dati del campo magnetico terrestre da modello IGRF a determinate coordinate e quota e fornisce agli alimentatori del set di bobine l'indicazione della corrente da distribuire. L'air-bearing system è un cuscinetto d'aria generato da un compressore che serve a ricreare le caratteristiche condizioni dell'ambiente spaziale di microgravità e attrito quasi-zero. Il CubeSat di test sarà montato su questo sistema. Il CubeSat di test, nella prima versione di AlmaTB, contiene i sensori e gli attuatori di tipo magnetico per determinare e controllare l'assetto di un nanosatellite. Il magnetometro presente all'interno è utilizzato anche come controllo del funzionamento della gabbia di Helmholtz. Il metrology system traccia i movimenti e l'inclinazione del CubeSat. Questo fornisce il riferimento di assetto vero, in modo da capire se il sistema ADCS lavora correttamente. Una volta che il banco di prova sarà completato e operativo sarà possibile testare algoritmi di determinazione e controllo di assetto che utilizzano diversi dispositivi tra sensori e attuatori disponibili nel mock-up. Su una workstation sono installati i software di controllo ed elaborazione dati. Si è scelto di procedere con un approccio di tipo "chiavi in mano", cioè scegliendo, quando disponibile, sistemi già completi e disponibili sul mercato. La prima versione di AlmaTB nasce dall'importante, vasto lavoro di matching tra i diversi apparati.

Substituting outline fonts for bitmap fonts in archived PDF files

As collections of archived digital documents continue to grow the maintenance of an archive, and the quality of reproduction from the archived format, become important long-term considerations. In particular, Adobe s PDF is now an important final form standard for archiving and distributing electronic versions of technical documents. It is important that all embedded images in the PDF, and any fonts used for text rendering, should at the very minimum be easily readable on screen. Unfortunately, because PDF is based on PostScript technology, it allows the embedding of bitmap fonts in Adobe Type 3 format as well as higher-quality outline fonts in TrueType or Adobe Type 1 formats. Bitmap fonts do not generally perform well when they are scaled and rendered on low-resolution devices such as workstation screens. The work described here investigates how a plug-in to Adobe Acrobat enables bitmap fonts to be substituted by corresponding outline fonts using a checksum matching technique against a canonical set of bitmap fonts, as originally distributed. The target documents for our initial investigations are those PDF files produced by (La)TEXsystems when set up in a default (bitmap font) configuration. For all bitmap fonts where recognition exceeds a certain confidence threshold replacement fonts in Adobe Type 1 (outline) format can be substituted with consequent improvements in file size, screen display quality and rendering speed. The accuracy of font recognition is discussed together with the prospects of extending these methods to bitmap-font PDF files from sources other than (La)TEX.

Data structures for SIMD logic simulation

Due to the growth of design size and complexity, design verification is an important aspect of the Logic Circuit development process. The purpose of verification is to validate that the design meets the system requirements and specification. This is done by either functional or formal verification. The most popular approach to functional verification is the use of simulation based techniques. Using models to replicate the behaviour of an actual system is called simulation. In this thesis, a software/data structure architecture without explicit locks is proposed to accelerate logic gate circuit simulation. We call thus system ZSIM. The ZSIM software architecture simulator targets low cost SIMD multi-core machines. Its performance is evaluated on the Intel Xeon Phi and 2 other machines (Intel Xeon and AMD Opteron). The aim of these experiments is to: • Verify that the data structure used allows SIMD acceleration, particularly on machines with gather instructions ( section 5.3.1). • Verify that, on sufficiently large circuits, substantial gains could be made from multicore parallelism ( section 5.3.2 ). • Show that a simulator using this approach out-performs an existing commercial simulator on a standard workstation ( section 5.3.3 ). • Show that the performance on a cheap Xeon Phi card is competitive with results reported elsewhere on much more expensive super-computers ( section 5.3.5 ). To evaluate the ZSIM, two types of test circuits were used: 1. Circuits from the IWLS benchmark suit [1] which allow direct comparison with other published studies of parallel simulators.2. Circuits generated by a parametrised circuit synthesizer. The synthesizer used an algorithm that has been shown to generate circuits that are statistically representative of real logic circuits. The synthesizer allowed testing of a range of very large circuits, larger than the ones for which it was possible to obtain open source files. The experimental results show that with SIMD acceleration and multicore, ZSIM gained a peak parallelisation factor of 300 on Intel Xeon Phi and 11 on Intel Xeon. With only SIMD enabled, ZSIM achieved a maximum parallelistion gain of 10 on Intel Xeon Phi and 4 on Intel Xeon. Furthermore, it was shown that this software architecture simulator running on a SIMD machine is much faster than, and can handle much bigger circuits than a widely used commercial simulator (Xilinx) running on a workstation. The performance achieved by ZSIM was also compared with similar pre-existing work on logic simulation targeting GPUs and supercomputers. It was shown that ZSIM simulator running on a Xeon Phi machine gives comparable simulation performance to the IBM Blue Gene supercomputer at very much lower cost. The experimental results have shown that the Xeon Phi is competitive with simulation on GPUs and allows the handling of much larger circuits than have been reported for GPU simulation. When targeting Xeon Phi architecture, the automatic cache management of the Xeon Phi, handles and manages the on-chip local store without any explicit mention of the local store being made in the architecture of the simulator itself. However, targeting GPUs, explicit cache management in program increases the complexity of the software architecture. Furthermore, one of the strongest points of the ZSIM simulator is its portability. Note that the same code was tested on both AMD and Xeon Phi machines. The same architecture that efficiently performs on Xeon Phi, was ported into a 64 core NUMA AMD Opteron. To conclude, the two main achievements are restated as following: The primary achievement of this work was proving that the ZSIM architecture was faster than previously published logic simulators on low cost platforms. The secondary achievement was the development of a synthetic testing suite that went beyond the scale range that was previously publicly available, based on prior work that showed the synthesis technique is valid.

Evaluation of ergonomic physical risk factors in a truck manufacturing plant: case study in SCANIA Production Angers

International audience

Perspetiva dos empregadores face à integração socioprofissional de pessoas com dificuldades intelectuais e de desenvolvimento

O presente estudo pretende analisar a perspetiva dos empregadores face à integração socioprofissional de pessoas com Dificuldades Intelectuais e de Desenvolvimento (DID). Considerando as políticas que consagram direitos e igualdade de oportunidades, pretende-se analisar a integração social ou exclusão existente aquando da contratação laboral de uma pessoa com deficiência e/ou incapacidade. Foi aplicada uma entrevista semiestruturada a 13 empregadores, dos quais sete já têm no seu quadro empresarial pessoas com DID e seis que nunca integraram esta população nas suas organizações. As entrevistas foram analisadas a partir da metodologia de análise. Os resultados revelaram que os empregadores que integram população com DID manifestam uma abertura à empregabilidade de indivíduos com DID, numa lógica de igualdade de oportunidades face ao emprego. No entanto, o vínculo laboral às entidades empregadoras continua a ser precário (e.g. estágios e medidas de apoio à contratação). Os resultados também sugerem as características individuais da pessoa com DID um importante determinante da sua contratação. No que respeita os empregadores que nunca integraram pessoas com DID os resultados revelaram que estes participantes estão muito pouco informados acerca da problemática da deficiência, principalmente de indivíduos com DID. Os resultados voltam a sugerir que o ajustamento entre características pessoais e posto de trabalho são decisivas para a integração de pessoas com DID no mercado de trabalho. O conjunto dos resultados é discutido considerando as limitações da presente investigação bem como suas implicações para a investigação e a prática; The employers perspective concerning social and professional integration of people with Intellectual and Developmental Disability Abstract: The present study aims to analyze the employers perspective concerning social and professional integration of people with “Intellectual and Developmental Disability” (IDD). Considering that policies establish equal rights and opportunities, we intend to analyze the social integration or social exclusion that occurs when hiring a disabled person. We conducted a semi-structured interview to 13 employers, seven of which have already have people with IDD in their business environment and the other six had never had people with IDD in their organizations. The interviews were analyzed using analysis methodology. The results showed that employers who integrate people with IDD are more open to the employability of these individuals, pursuing employment gender equality. However the employment contract for employers remain precarious (eg, internships and employment support measures). The results also suggest that the individual’s characteristics are an important determinant for hiring the person with IDD. Employers who have never integrated individuals with IDD lack awareness about disability issues. As suggested by the results, the adjustment between personal characteristics and the workstation is crucial for the integration of people with IDD in the labor market. This particular set of results is discussed considering the limitations of this research and its implications for future research and practice.

A 30-month worksite-based lifestyle program to promote cardiovascular health in middle-aged bank employees: Design of the TANSNIP-PESA randomized controlled trial

Cardiovascular disease (CVD) is the leading cause of death worldwide. With atherosclerosis as the underlying cause for many CVD events, prevention or reduction of subclinical atherosclerotic plaque burden (SAPB) through a healthier lifestyle may have substantial public health benefits. The objective was to describe the protocol of a randomized controlled trial investigating the effectiveness of a 30-month worksite-based lifestyle program aimed to promote cardiovascular health in participants having a high or a low degree of SAPB compared with standard care. We will conduct a randomized controlled trial including middle-aged bank employees from the Progression of Early Subclinical Atherosclerosis cohort, stratified by SAPB (high SAPB n = 260, low SAPB n = 590). Within each stratum, participants will be randomized 1:1 to receive a lifestyle program or standard care. The program consists of 3 elements: (a) 12 personalized lifestyle counseling sessions using Motivational Interviewing over a 30-month period, (b) a wrist-worn physical activity tracker, and (c) a sit-stand workstation. Primary outcome measure is a composite score of blood pressure, physical activity, sedentary time, body weight, diet, and smoking (ie, adapted Fuster-BEWAT score) measured at baseline and at 1-, 2-, and 3-year follow-up. The study will provide insights into the effectiveness of a 30-month worksite-based lifestyle program to promote cardiovascular health compared with standard care in participants with a high or low degree of SAPB.

Prevalencia de síntomas relacionados con desórdenes musculo esqueléticos en trabajadores de una empresa dedicada a la venta y distribución de medicamentos y equipos médicos - Colombia, 2015.

Introducción: Los Desórdenes Musculo-Esqueléticos (DME) tienen origen multifactorial. En Colombia corresponden al principal grupo diagnóstico en procesos relacionados con la determinación de origen y pérdida de capacidad laboral. Objetivo: Determinar la relación entre síntomas musculo-esqueléticos y factores relacionados con la carga física en trabajadores de una empresa dedicada a la venta y distribución de medicamentos y equipos médicos, Bogotá (Colombia), en el año 2015. Materiales y Métodos: Estudio de corte transversal en 235 trabajadores. Se incluyeron variables sociodemográficas, ocupacionales y las relacionadas con los síntomas musculoesqueléticos y carga física. Se utilizó en cuestionario ERGOPAR. Para el análisis se utilizó la Prueba Exacta de Fisher, el Odds Ratio (OR) con el Intervalo de Confianza (IC) del 95%. Se realizó el análisis Multivariado con Regresión Logística Binaria. Resultados: La prevalencia de síntomas relacionados con DME fue de 79,2%, siendo más prevalente en cuello, hombros y columna dorsal (48,1%), seguido por columna lumbar (35,3%). Se encontró una asociación entre síntomas en cuello, hombros y/o columna dorsal con el sexo femenino (p=0,005, OR=2,33, 95%IC: 1,2-4,2); adoptar postura bípeda menos de 30 minutos (p=0,004, OR=3,34, 95%IC: 1,4-7,6); adoptar postura cabeza/cuello inclinado hacia delante entre 30 minutos y 2 horas (p=0,007, OR=3,25, 95%IC :1,3-7,7) y en columna lumbar con adoptar postura espalda/tronco hacia delante entre 30 minutos y 2 horas (p=0,001, OR=4,27, 95%IC: 1,7-10,3); y la antigüedad en el cargo entre 1 y 5 años (p=0,009, OR=3,47, 95%IC: 1,3-8,8). Conclusión: Las posturas bípedas con y sin desplazamiento, inclinaciones de tronco y cabeza, transporte manual de cargas, sexo femenino, antigüedad en el cargo y edad están asociadas conjuntamente al riesgo para presentar DME.