Systematic design analysis and risk management on engineered nanoparticles occupational exposure

The production of nanotechnology-based products is increasing, along with the conscience of the possible harmful effects of some nanomaterials. The “safety-by-design” approaches are getting attention as helpful tools to develop safer products and production processes. The Systematic Design Analysis Approach could help to identify the solutions to control the workplace risks by defining the emission and exposure scenarios and the possible barriers to interrupt them. By applying this approach in a photocatalytic ceramic tiles development project it was possible to identify relevant nanoparticles emission scenarios and related barriers, and defining possible ways to reduce it.

Association between distressing non-work-related events and occupational injuries

The following is a report on a case-control study whose objective was to investigate the association between distressing non-work-related events and occupational injures. Ninety three injured workers (cases) were matched with 372 non-injured controls in a large metallurgical factory in southeastern Brazil. Exposure to distressing non-work-related events was measured through a questionnaire focusing on situations pertaining to personal problems unrelated to work activities. The data were analyzed by adjusting a conditional logistic regression model, where occurrence of the work injury was the dependent dichotomous variable and answers from the questionnaire were independent continuous variables. The analysis showed an association between some distressing non-work-related events and occupational injuries. These findings imply expanding the horizon of preventive measures used in targeting. work injuries which have traditionally been focused on the control of strictly workplace risks.

Survey of safety climate in public hospitals in Costa Rica in 1997

In response to growing concern for occupational health and safety in the public hospital system in Costa Rica, a research program was initiated in 1995 to evaluate and improve the safety climate in the national healthcare system through regional training programs, and to develop the capacity of the occupational health commissions in these settings to improve the identification and mitigation of workplace risks. A cross-sectional survey of 1000 hospital-based healthcare workers was conducted in 1997 to collect baseline data that will be used to develop appropriate worker training programs in occupational health. The objectives of this survey were to: (1) describe the safety climate within the national hospital system, (2) identify factors associated with safety climate focusing on individual and organizational variables, and (3) to evaluate the relationship between safety climate and workplace injuries and safety practices of employees. Individual factors evaluated included the demographic variables of age, gender, education and profession. Organizational factors evaluated included training, psychosocial work environment, job-task demands, availability of protective equipment and administrative controls. Work-related injuries and safety practices of employees included the type and frequency of injuries experienced and reported, and compliance with established safety practices. Multivariate regression analyses demonstrated that training and administrative controls were the two most significant predictors of safety climate. None of the demographic variables were significant predictors of safety climate. Safety climate was inversely and significantly associated with workplace injuries and positively and significantly associated with safety practices. These results suggest that training and administrative controls should be included in future training efforts and that improving safety climate will decrease workplace injuries and increase safety practices. ^

A multi-site pilot test study to measure safety climate in the university work setting

Next to leisure, sport, and household activities, the most common activity resulting in medically consulted injuries and poisonings in the United States is work, with an estimated 4 million workplace related episodes reported in 2008 (U.S. Department of Health and Human Services, 2009). To address the risks inherent to various occupations, risk management programs are typically put in place that include worker training, engineering controls, and personal protective equipment. Recent studies have shown that such interventions alone are insufficient to adequately manage workplace risks, and that the climate in which the workers and safety program exist (known as the "safety climate") is an equally important consideration. The organizational safety climate is so important that many studies have focused on developing means of measuring it in various work settings. While safety climate studies have been reported for several industrial settings, published studies on assessing safety climate in the university work setting are largely absent. Universities are particularly unique workplaces because of the potential exposure to a diversity of agents representing both acute and chronic risks. Universities are also unique because readily detectable health and safety outcomes are relatively rare. The ability to measure safety climate in a work setting with rarely observed systemic outcome measures could serve as a powerful means of measure for the evaluation of safety risk management programs. ^ The goal of this research study was the development of a survey tool to measure safety climate specifically in the university work setting. The use of a standardized tool also allows for comparisons among universities throughout the United States. A specific study objective was accomplished to quantitatively assess safety climate at five universities across the United States. At five universities, 971 participants completed an online questionnaire to measure the safety climate. The average safety climate score across the five universities was 3.92 on a scale of 1 to 5, with 5 indicating very high perceptions of safety at these universities. The two lowest overall dimensions of university safety climate were "acknowledgement of safety performance" and "department and supervisor's safety commitment". The results underscore how the perception of safety climate is significantly influenced at the local level. A second study objective regarding evaluating the reliability and validity of the safety climate questionnaire was accomplished. A third objective fulfilled was to provide executive summaries resulting from the questionnaire to the participating universities' health & safety professionals and collect feedback on usefulness, relevance and perceived accuracy. Overall, the professionals found the survey and results to be very useful, relevant and accurate. Finally, the safety climate questionnaire will be offered to other universities for benchmarking purposes at the annual meeting of a nationally recognized university health and safety organization. The ultimate goal of the project was accomplished and was the creation of a standardized tool that can be used for measuring safety climate in the university work setting and can facilitate meaningful comparisons amongst institutions.^

Occupational health and safety among commercial sex workers in Ghana

The topic of occupational health and safety (OHS) has been investigated for many years and continues to be a concept often researched today. Generally speaking OHS research has been centered around food safety, construction safety, transportation safety, fire safety, drug and alcohol testing, health and medical management, and industrial hygiene to name a few. However, the concept of OHS concerning female commercial sex workers (FCSWs) has rarely been investigated, often neglected, seldom discussed and is lacking in sound research. Although regarded as the "oldest profession", commercial sex work (CSW) has consistently been ignored, disregarded and under-researched due to the illegality and stigmatization of prostitution. This paper reviews occupational safety and health issues faced by FCSWs in Tema and Accra, Ghana, through in-depth interviews, visits to women's homes, field work, informal conversations and participant observations with FCSWs over a period of two months. Facets of OHS that emerged among FCSWs included sexually transmissible infections, risks associated with harassment and violence from police and clients, alcohol and drug use, irregular hospital visits and/or lack of hospital visits, immigration issues, legal and policing risks. We argue that CSW be viewed as an occupation in great need of interventions to reduce workplace risks and improve the health and safety of FCSWs^

Management of safety climate and the psychosocial work environment – new challenges for occupational health and safety professionals?

Introduction: The work environment and Occupational Health and Safety (OHS) practice have changed over the last number of years. A holistic OHS approach has been recommended by the authorities in this field (e.g. World Health Organisation (WHO), European Agency for Safety and Health at Work (EU-OSHA) and the International Labour Organisation (ILO)). This involves a unified action engaging elements of the physical and psychosocial workplace with greater focus on prevention and promotion of health and wellbeing. The health and safety practitioner (HSP) has been recognised as one of the main agents for implementation of OHS. Within an organisation they act as a leader of change and a professional who shapes health and safety while safeguarding the wellbeing of individuals at work. Additionally, safety climate (SC) has been developed as an essential concept for OHS of an organisation, its productivity and the wellbeing of its workforce. Scholars and practitioners have recognised the great need for further empirical evidence on the HSP’s role in a changing work environment that increasingly requires the use of preventative measures and the assessment and management of psychosocial work-related risks. This doctoral research brings together the different concepts used in OHS and Public Health including SC, Psychosocial workplace risks, Health Promotion and OHS performance. The associations between these concepts are analysed bearing in mind the WHO Healthy Workplace Framework and three of its main components (physical and psychosocial work environment and health resources). This thesis aims to establish a deeper understanding of the practice and management of OHS in Ireland and the UK, exploring the role of HSPs (employed in diverse sectors of activity) and of SC in the OHS of organisations. Methods: One systematic review and three cross-sectional research studies were performed. The systematic review focussed on the evidence compiled for the association of SC with accidents and injuries at work, clarifying this concept’s definition and its most relevant dimensions. The second article (chapter 3) explored the association of SC with accidents and injuries in a sample of workers (n=367) from a pharmaceutical industry and compared permanent with non-permanent workers. Associations of safety climate with employment status and with self-reported occupational accidents/injuries were studied through logistic regression modelling. The third and fourth papers in this thesis investigated the main tasks performed by HSPs, their perceptions of SC, health climate (HC), psychosocial risk factors and health outcomes as well as work efficacy. Validated questionnaires were applied to a sample of HSPs in Ireland and UK, members of the Institute of Occupational Safety and Health (n=1444). Chi-square analysis and logistic regression were used to assess the association between HSPs work characteristics and their involvement in the management of Psychosocial Risk Factors, Safety Culture and Health Promotion (paper 3). Multiple linear regression analysis was used to determine the association between SC, HC, psychosocial risk factors and health outcomes (general health and mental wellbeing) and self-efficacy. Results: As shown in the systematic review, scientific evidence is unable to establish the widely assumed causal link between SC and accidents and injuries. Nevertheless, the current results suggested that, particularly, the organisational dimensions of SC were associated with accidents and injuries and that SC is linked to health, wellbeing and safety performance in the organisation. According to the present research, contingent workers had lower SC perceptions but showed a lower accident/injury rate than their permanent colleagues. The associations of safety climate with accidents/injuries had opposite directions for the two types of workers as for permanent employees it showed an inverse relationship while for temporary workers, although not significant, a positive association was found. This thesis’ findings showed that HSPs are, to a very small degree, included in activities related to psychosocial risk management and assessment, to a moderate degree, involved in HP activities and, to a large degree, engaged in the management of safety culture in organisations. In the final research study, SC and HC were linked to job demands-control-support (JDCS), health, wellbeing and efficacy. JDCS were also associated with all three outcomes under study. Results also showed the contribution of psychosocial risk factors to the association of SC and HC with all the studied outcomes. These associations had rarely been recorded previously. Discussion & Conclusions: Health and safety climate showed a significant association with health, wellbeing and efficacy - a relationship which affects working conditions and the health and wellbeing of the workforce. This demonstrates the link of both SC and HC with the OHS and the general strength or viability of organisations. A division was noticed between the area of “health” and “safety” in the workplace and in the approach to the physical and psychosocial work environment. These findings highlighted the current challenge in ensuring a holistic and multidisciplinary approach for prevention of hazards and for an integrated OHS management. HSPs have shown to be a pivotal agent in the shaping and development of OHS in organisations. However, as observed in this thesis, the role of these professionals is still far from the recommended involvement in the management of psychosocial risk factors and could have a more complete engagement in other areas of OHS such as health promotion. Additionally, a strong culture of health and safety with supportive management and buy-in from all stakeholders is essential to achieve the ideal unified and prevention-focussed approach to OHS as recommended by the WHO, EU-OSHA and ILO.

The calculation of accident risks in fitness for work assessments: diseases that can cause sudden incapacity

Risk equations have been developed to assist in determining fitness for work of people with diseases that may cause rapid loss of control. The four equations calculate the frequency of fatal injury to the person with the disease, the frequency of fatal injury to colleagues in the workplace, and the cost of fatal injury and property damage to the employer, it is suggested that the additional risk of fatal injury to the person with the disease should not exceed the fatal injury rate in high-risk industries such as forestry, fishing and mining. it is also suggested that the additional risk of fatal injury to each colleague should be no more than one-tenth of the fatal injury rate due to motor vehicle accidents in the community. Two hypothetical case examples are given, demonstrating the use of the equations. The equations highlight the need to examine the risks associated with individuals, their specific jobs and their workplaces. They also highlight significant uncertainties in the determination of fitness, which perhaps have been underestimated in the past. Wherever possible, redundant defences should be utilized to prevent accidents in the event of sudden incapacity.

MORM--a Petri net based model for assessing OH&S risks in industrial processes: modeling qualitative aspects.

Because of the increase in workplace automation and the diversification of industrial processes, workplaces have become more and more complex. The classical approaches used to address workplace hazard concerns, such as checklists or sequence models, are, therefore, of limited use in such complex systems. Moreover, because of the multifaceted nature of workplaces, the use of single-oriented methods, such as AEA (man oriented), FMEA (system oriented), or HAZOP (process oriented), is not satisfactory. The use of a dynamic modeling approach in order to allow multiple-oriented analyses may constitute an alternative to overcome this limitation. The qualitative modeling aspects of the MORM (man-machine occupational risk modeling) model are discussed in this article. The model, realized on an object-oriented Petri net tool (CO-OPN), has been developed to simulate and analyze industrial processes in an OH&S perspective. The industrial process is modeled as a set of interconnected subnets (state spaces), which describe its constitutive machines. Process-related factors are introduced, in an explicit way, through machine interconnections and flow properties. While man-machine interactions are modeled as triggering events for the state spaces of the machines, the CREAM cognitive behavior model is used in order to establish the relevant triggering events. In the CO-OPN formalism, the model is expressed as a set of interconnected CO-OPN objects defined over data types expressing the measure attached to the flow of entities transiting through the machines. Constraints on the measures assigned to these entities are used to determine the state changes in each machine. Interconnecting machines implies the composition of such flow and consequently the interconnection of the measure constraints. This is reflected by the construction of constraint enrichment hierarchies, which can be used for simulation and analysis optimization in a clear mathematical framework. The use of Petri nets to perform multiple-oriented analysis opens perspectives in the field of industrial risk management. It may significantly reduce the duration of the assessment process. But, most of all, it opens perspectives in the field of risk comparisons and integrated risk management. Moreover, because of the generic nature of the model and tool used, the same concepts and patterns may be used to model a wide range of systems and application fields.

Acquisition and transfer of experiential learning from rock climbing to the corporate workplace

There were three purposes to this study. The first purpose was to determine how learning can be influenced by various factors i~ the rock climbing experience. The second purpose was to examine what people can learn from the rock climbing experience. The third purpose was to investigate whether that learning can transfer from the rock climbing experience to the subjects' real life in the workplace. Ninety employees from a financial corporation in the Niagara Region volunteered for this study. All subjects were surveyed throughout a one-day treatment. Ten were purposefully selected one month later for interviews. Ten themes emerged from the subjects in terms of what was learned. Inspiration, motivation, and determination, preparation, goals and limitations, perceptions and expectations, confidence and risk taking, trust and support, teamwork, feedback and encouragement, learning from failure, and finally, skills and flow. All participants were able to transfer what was learned back to the workplace. The results of this study suggested that subjects' learning was influenced by their ability to: take risks in a safe environment, fail without penalty, support each other, plan without time constraints, and enjoy the company of fellow workers that they wouldn't normally associate with. Future directions for research should include different types of treatments such as white water rafting, sky diving, tall ship sailing, or caving.

Il/legitimate risks? Occupational health and safety and the public in Britain, c. 1960-2015

The last 20 years have seen the emergence of a popular climate of antipathy towards occupational health and safety regulation within the UK, particularly within the mainstream British media. The governance of health and safety has thus in recent years become an increasingly visible and contested public and political issue. The extent of this contestation, and its impact on the State’s governance of health and safety in the workplace and beyond, is explained and historicized within this chapter. Why has public rhetoric about health and safety apparently become so important in framing the ways in which the State could legitimately act in recent years? The chapter demonstrates how since 1960 the State remained a significant player – one among many, admittedly – and that while its roles in managing health and safety had long been bounded by a number of factors, a variable that emerged with particular saliency over the last 20 years has been a mediated notion of ‘public opinion’. This focus serves to remind us of the ways in which State action has at certain moments been pushed in particular directions by factors beyond formal mechanisms of rule.

HEALTH AND SAFETY ISSUES IN THE WORKPLACE: THE CASE OF CAMEROON TEA ESTATE (CTE), A RISK COMMUNICATION APPROACH

In 2002, motivated largely by the uncontested belief that the private sector would operate more efficiently than the government, the government of Cameroon initiated a major effort to privatize some of Cameroon’s largest, state-run industries. One of the economic sectors affected by this privatization was tea production. In October 2002, the Cameroon Tea Estate (CTE), a privately owned, tea-cultivating organization, bought the Tole Tea Estate from the Cameroon Development Corporation (CDC), a government-owned entity. This led to an increase in the quantity of tea production; however, the government and CTE management appear not to have fully considered the risks of privatization. Using classical rhetorical theory, Richard Weaver’s conception of “god terms” (or “uncontested terms”), and John Ikerd’s ethical approach to risk communication, this study examines risks to which Tole Tea Estate workers were exposed and explores rhetorical strategies that workers employed in expressing their discontent. Sources for this study include online newspapers, which were selected on the basis of their reputation and popularity in Cameroon. Analysis of the data shows that, as a consequence of privatization, Tole Tea Estate workers were exposed to three basic risks: marginalization, unfulfilled promises, and poor working conditions. Workers’ reactions to these risks tended to grow more emotional as management appeared to ignore their demands. The study recommends that respect for labor law, constructive dialogue among stakeholders, and transparency might serve as guiding principles in responding to the politics of privatization in developing countries.

Workers' understanding of chemical risks: electroplating case study

BACKGROUND: There is limited research concerning how small companies in particular, respond to health and safety messages. AIMS: To understand individuals' knowledge and beliefs about chemical risks and to compare these with those of experts. METHODS: The use of chromic acid in particular, and also other chemicals associated with chrome plating were studied. All chromium plating firms were based in the West Midlands. The methodology involved initial face to face interviews (n = 21) with chromium platers, structured questionnaires (n = 84) to test the prevalence of beliefs identified in the interviews, an expert questionnaire, and a workshop to discuss findings. The responses of platers were compared with those of occupational health and safety experts. RESULTS: Although chromium platers appeared to understand the short term adverse effects of the chemicals to which they are exposed, their understanding of long term, or chronic effects appeared to be incomplete. They had good knowledge of acute effects based primarily on experience. Platers were aware of the hazardous nature of the chemicals with which they work, but did not draw distinction between the terms "hazards" and "risks". They had difficulties articulating the effects of the chemicals and how exposure might occur; although it is inappropriate to equate this with lack of knowledge. A significant minority of platers displayed deficiencies in understanding key technical terms used in Safety Data Sheets. CONCLUSIONS: This study provides a method which can be used to gain some understanding of workers' knowledge and beliefs about risks that they are exposed to in the workplace. The study also identifies gaps between the platers' knowledge and beliefs and those of experts. New risk information needs to be designed which addresses the information needs of platers using language that they understand.

[lean Production And Psychosocial Risks: The Case Of A Multinational Merger In A Metallurgical Company In Brazil].

This study focused on the method known as lean production as a work-related psychosocial risk factor in a Brazilian multinational auto parts company after its merger with other multinational companies. The authors conducted a qualitative analysis of two time points: the first using on-site observation and key interviews with managers and workers during implementation of lean production in 1996; the second, 16 years later, comparing data from a document search in labor inspection records from the Ministry of Labor and Employment and legal proceedings initiated by the Office of the Public Prosecutor for Labor Affairs. The merger led to layoffs, replacements, and an increase in the workday. A class action suit was filed on grounds of aggravated working conditions. The new production model led to psychosocial risks that increased the need for workers' health precautions when changes in the production process introduced new and increased risks of physical and mental illnesses.

Vigilância em saúde no Brasil: os desafios dos riscos sanitários do século XXI e a necessidade de criação de um sistema nacional de vigilância em saúde

The technological development experienced in the contemporary world are transforming society and relations between State and people. The mobility of human being has reached levels never before imagined and a person can move from one side of the world to the other side in less than 24 hours. This mobility also includes goods and services, giving the keynote of the globalized world of the XXI Century. In this context, the risks of diseases and others health problems are intensely amplified. Nowadays, an epidemic that begins in China can arrive in Brazil the following day. Brazil recognizes health as a universal right and also consider it a State's obligation. Therefore, the State of Brazil is obligated to organize itself to eliminate or control health risks. Today, the organization of the Brazilian State regarding the surveillance of risks of diseases and other health problems is fragmented and includes sanitary surveillance (focused on goods, products and services), epidemiological surveillance (diseases and investigations of other risks) and environmental surveillance in health (the environment in general, including the workplace). This fragmentation causes problems for the management and consolidation of strategic information for health protection. Brazil has the need to think about an other model of organization that put together all "kinds" of surveillances within a single coordinated system, called the National System of Health Surveillance, which would be able to coordinate the various specialties of health surveillance that exists in the country in order to provide a effective system of information and health surveillance, able to face emergency situations of public health

Identification and control of occupational risks in a Sao Paulo metropolitan region quarry

Crushed stone mining is the third largest mining economy in Brazil, where almost half is produced in the Sao Paulo metropolitan region. The segment registers the highest number of accidents among the extractive industries, which justifies the concern with workers` health and safety, and the importance of controlling occupational hazards. Since 2002, the NR-22 Standard (NR-22: Occupational Health and Safety in Mining) makes compulsory the elaboration of a Risk Management Program that identifies risks and establishes control measures. Considering the crushed stone mining industry importance to the state, this paper evaluates and discusses the risks identified in unit operations during the production process of crushed stone in an open pit mine in order to propose control measures for the development of the Risk Management Program. Although this study refers to a specific quarry, it can be applied to other mines from the same sector since some considerations are made regarding differences in manufacturing processes. The research was based on the identification of the main risks associated with drilling, blasting, load & haulage, crushing and screening through field measurements of some hazardous agents, together with company reports. The results contributed to the choice of the appropriate control measures for the improvement Of workers` health and safety conditions.