The influence of an in-service programme on primary teachers conceptions about practical work

The purpose of this study was to investigate how an in-service programme influenced primary teachers’ conceptions about practical work. Ten elementary teachers participated in a Portuguese city in an one-year professional development programme, which aimed to promote the use of practical activities in classroom. Semi-structured interviews and classroom observations were both used to examine changes in teachers’ conceptions about science teaching and in their classroom pratices. Data also included written artefacts, such as teachers’ written reflections, lesson plans, activity sheets, assessment items and student work samples. Based on the analysis of the data, the changes in teachers’ conceptions were organized into four categories: student and learning, teacher and teaching, science teaching, and teaching context. Throughout their participation in the programme, teachers pointed out several constraints related to planning and implementing practical activities. Results indicate that most teachers were able to overcome their initial difficulties and progressively gained more confidence in using student-centered pratices. However, one year after the end of the programme, teachers reported that their actual practices did not changed significantly, particularly with regard to inquiry-based practical and collaborative activities, which remained absent or rare. Implications for professional development and further research are discussed.

Caracterização de quitosana por Cromatografia de Permeação em Gel - Influência do método de preparação e do solvente

In this work, samples of chitosan obtained in different conditions were characterized by molecular weight distribution, using Gel Permeation Chromatography (GPC), in two different solvents. It was observed that the increase in the number of deacetylation steps promotes a increase in the degree of deacetylation followed by a decrease in the average of molecular weight and polydispersion. The GPC curves obtained for chitosan samples in the two solvents used (CH3COOH 0.30 mol/dm³ - CH3CONa 0.20 mol/dm³ and CH3COOH 0.10 mol/dm³ - NaCl 0.20 mol/dm³) showed small difference in elution volume, but significant changes in the average molecular weight (Mn and Mw) and polydispersion that, in agree with the values of Huggins constant, present evidences of chitosan aggregates formation in the second solvent.

Mecanismos químicos e mineralógicos de transformação da magnesioferrita de solo derivado de tufito, da região do Alto Paranaíba, MG

Magnetic soils forming on tuffite of the region of Alto Paranaíba, Minas Gerais, Brazil, usually contain iron-rich spinels exceptionally rich in magnesium and titanium. In this work, samples of the magnetically separated portion from the sand fraction of a Brunizém (Chernossolo) and from its mother-rock material were analyzed with synchrotron X-ray diffraction and 57Fe-Mössbauer spectroscopy. Magnesioferite (MgFe2O4) and maghemite (its pure non-stoichiometric spinel structure, Fe8/3 ⊕ 1/3 O4, where ⊕ = cation vacancy, corresponds to γFe2O3) were the magnetic iron oxides so identified. Basing on these data, a consistent chemical-mineralogical model is proposed for the main transformation steps involving these iron oxides in the pedosystem, starting on magnesioferrite to finally render hematite (αFe2O3), passing through maghemite as an intermediate specie.

Strategier för presentationav arbetsprover inom grafiskdesign : hur en arbetssökande grafiskdesigner bäst ”säljer sig själv” tillanställning

För att få drömjobbet inom en konkurrenskraftig bransch som grafiskdesign krävs det lilla extra. Syftet med denna undersökning är att ta redapå vad detta extra är och därigenom underlätta för arbetssökandegrafiska designers på vägen till drömjobbet.Genom tre djupgående intervjuer med anställda på medelstora byråer iMellansverige undersöktes vad arbetsgivare uppskattar och förväntar sigav en arbetssökande grafisk designer. Frågeställningen behandladeportfolions framtid med branschens digitalisering som bakgrund, samthur en arbetssökande fångar arbetsgivarens intresse.Resultatet visar att även om portfolion utgör en stor del av underlaget förrekrytering av personal, är personen bakom portfolion och vad den haratt berätta om innehållet det som är viktigast. En portfolio som intebeskriver sammanhang duger inte som marknadsföringsmaterial. Attvårda det personliga varumärket framstår som viktigt för framgång. Dendigitala portfolion dominerar marknaden, men fysiska arbetsproverupplevs som ett möjligt sätt att stå ut från mängden. Digitala nätverkmottas positivt av branschen, men webbplatser anses ha mer substans.

Estudo da zircônia reforçado com alumina

Ceramics materials have good properties including chemical stability, high hardness and wear resistance. Moreover, due to its fragility, can suffer failure under relatively low levels of tension. Actually zirconia is the material of choice in metal free dental prostheses used in dentistry due its inertia in physiological environment, good bending strength, hardness and fracture toughness. The alumina and mixed tungsten and titanium carbides additions, acting as reinforcement elements in the zirconia matrix, have as their main objective the improvement of mechanical properties of this material. In this work, samples of zirconia, zirconia with 30% wt of alumina and zirconia with 30% wt mixed carbides were analyzed. The samples were sintered by uniaxial hot pressing on 30 MPa pressure, for 1 hour in an argon atmosphere. They were physically characterized by porosity and density measurements, and mechanically by 3-points bending strength and Vickers microhardness. The X-ray diffraction was used for the phase identifications and microstructure was examined by scanning electron microscopy (SEM). The addition of mixed carbides as reinforcement elements in zirconia matrix provides improvements in all properties analyzed in this work. The alumina addition has dropped the zirconia strength, although it caused improvement in other properties

Synthesis and structural characterization of Eu(III)-doped Zn7Sb2O12

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização morfológica e sedimentar do talude continental (foz do Amazonas)

Created on 3 december 1997, the REMPLAC (Program for Assessment of Mineral Potencial of the Continental Shelf), this porgram aimed to make the basic survey, systematic geological and geophysical continental shelf, detail, at an appropriate scale, sites geo-economic, and perform the analysis and evaluation of mineral deposits. The REMPLAC should continue the efforts of Global Recognition Program of the Brazilian Continental Margin REMAC closed in 1978, the operations Geophysical Sea (GEOMAR) developed by the Directorate of Hydrography and Navigation and the various initiatives of the Program of Marine Geology and Geophysics (PGGM). Despite the high interest on the Amazon platform, there is little information o their morphology and sediment characterization, and in order to fill this gap, the present work samples sedimentological point followed by seismic acquisition. And the studies were to characterize the possible area of interest as being directly influence by tides, which sediments are reworked throughout the platform featuring grain angle with sharp corners, and the carbonate content increases as it approaches the breakdown the platform, and the bodies found outside the foraminifera and mollusks. However, diverging with organic matter that reduces its concentration as it moves away from the coast. The seismic profiles do not get satisfactory results because of low visibility, however, to correlate with the spot samples, of sediment were possible morphological characterization of the area.

Description of the larva and redescription of the adult of Kempnyia neotropica Jacobsen and Bianchi (Plecoptera : Perlidae) with biological notes

Kempnyia neotropica is the species with the widest distribution in this genus. In this work, samples collected in the states of Gois, Minas Gerais and So Paulo were analysed, confirming that all belong to a single species. The larva is described, the adult is redescribed and biological notes are presented.

Sinterização de uma mistura de cavaco de aço inoxidável com pó do mesmo material. Uma nova tecnologia para a reciclagem de metais?

The reuse of materials has as its main objective to minimize environmental impacts and to rationalize the use of energy chains. In the present work, samples of scraps of 316 stainless steel mixed with powder of the same material were sintered. For this case, the percentage of scrap was varied from zero to 25% in weight, with 5% increases. After compacting, under a pressure of 600MPa, the samples were sintered simultaneously at a temperature of 1473 K. The mechanical behavior of the final product was evaluated through Assays of Transversal Rupture recommended and normalized by the MPIF - Metal Powder Industries Federation. Using Conventional Quantitative Metallography, the analyses of the sintered samples demonstrated regions of intense diffusion, therefore, regions of sufficiently intense sintering. The mechanical resistance of the samples was compared with the mechanical resistance of the sintered stainless steel with no scrap. The results were greater than expected, demonstrating the viability of this new procedure.

Deposição de filmes por plasma eletrolítico em ligas de alumínio

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Preparação e caracterização de filmes finos Sr1-xMexTiO3(Me=Fe, Ni)

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Extração e identificação de material lignocelulósico presente durante o processo de compostagem

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Determinação de acetaldeído e formaldeído em água de chuva e suas correlações com carbono orgânico dissolvido em uma região canavieira: Daniely de Godoy Silva. -

Pós-graduação em Química - IQ

Influência do oxigênio nas propriedades anelásticas e biocompatibilidade de ligas Ti-5Zr e Ti-10Zr

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modificação da fração lignocelulósica durante o processo de compostagem do bagaço de cana-de-açúcar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)