Nature and genesis of some storm washover deposits /

"December 1975."

The sedimentology of the lower Silurian whirlpool sandstone in subsurface Lake Erie, Ontario

The lower Silurian Whirlpool Sandstone is composed of two main units: a fluvial unit and an estuarine to transitional marine unit. The lowermost unit is made up of sandy braided fluvial deposits, in shallow valleys, that flowed towards the northwest. The fluvial channels are largely filled by cross-bedded, well sorted, quartzose sands, with little ripple crosslaminated or overbank shales. Erosionally overlying this lower unit are brackish water to marine deposits. In the east, this unit consists of estuarine channels and tidal flat deposits. The channels consist of fluvial sands at the base, changing upwards into brackish and tidally influenced channelized sandstones and shales. The estuarine channels flowed to the southwest. Westwards, the unit contains backbarrier facies with extensive washover deposits. Separating the backbarrier facies from shoreface sandstone facies to the west, are barrier island sands represented by barrier-foreshore facies. The barrier islands are dissected by tidal inlets characterized by fining upward abandonment sequences. Inlet deposits are also present west of the barrier island, abandoned by transgression on the shoreface. The sandy marine deposits are replaced to the west by carbonates of the Manitoulin Limestone. During the latest Ordovician, a hiatus in crustal loading during the Taconic Orogeny led to erosional offloading and crustal rebound, the eroded material distributed towards the west, northwest and north as the terrestrial deposits of the fluvial Whirlpool. The "anti-peripheral bulge" of the rebound interfered with the peripheral bulge of the Michigan Basin, nulling the Algonquin Arch, and allowing the detritus of the fluvial Whirlpool to spread onto the Algonquin Arch. The Taconic Orogeny resumed in the earliest Silurian with crustal loading to the south and southeast, and causing tilting of the surface slope in subsurface Lake Erie towards the ii southwest. Lowstand terrestrial deposits were scoured into the new slope. The new crustal loading also reactivated the peripheral bulge of the Appalachian Basin, allowing it to interact with the bulge of the Michigan Basin, raising the Algonquin Arch. The crustal loading depressed the Appalachian basin and allowed transgression to occur. The renewed Algonquin Arch allowed the early Silurian transgression to proceed up two slopes, one to the east and one to the west. The transgression to the east entered the lowstand valleys and created the estuarine Whirlpool. The rising arch caused progradation of the Manitoulin carbonates upon shoreface facies of the Whirlpool Sandstone and upon offshore facies of the Cabot Head Formation. Further crustal loading caused basin subsidence and rapid transgression, abandoning the Whirlpool estuary in an offshore setting.

Aplicação do Processo Analítico Hierarquico (AHP) Para Priorização de Obras de Intervenção em Áreas e Setores de Risco Geológico nos Municípios de Itapecerica da Serra e Suzano (SP)

Municipal Plans of Risk Reducing (PMRR's) were produced in settlements in the municipalities of Itapecerica da Serra (SP) and Suzano (SP), covering areas at risk of landslides and washouts of banks of streams. The development of PMRR's provided the delimitation of areas of risk, the indication of intervention works in order to eliminate and / or reduce risks, and consequently an indication of the areas and priority sectors for implementation of intervention works. The prioritization of areas and sectors that should receive the works of reducing or eliminating risk was performed by an expert involved in risk mapping. Despite the specialist's judgment exercise caution, the decision regarding the priority sites for implementation of alternative interventions is subjective. Since there is no way to eliminate this subjectivity, the use of decision-making techniques is important to evaluate whether the expert's reasoning is consistent. One of the first techniques developed for multiple criteria is the AHP (Analytic Hierarchy Process). This paper describes the results of a research carried out in order to assess whether the use of Analytic Hierarchy Process contributes to the results of the indication of the areas and priority sectors for implementation of interventions can be considered more consistent than in situations where the priority occurs without the use of decision making techniques. Results were compared between the prioritization of interventions for implementation contained in PMRR's of Itapecerica da Serra and Suzano and those obtained from the use of Analytic Hierarchy Process (AHP). It was concluded that such techniques permits an evaluation of the expert's judgment is logically coherent, thus contributing to produce results more technically based.

A sucessão siliciclástica-carbonática neocarbonífera da bacia do Amazonas, regiões de Monte Alegre e Itaituba (PA)

Registros sedimentares do Neocarbonífero, particularmente do Moscoviano, na Bacia do Amazonas, Norte do Brasil, caracterizam a zona de contato entre as formações Monte Alegre (rochas siliciclásticas) e Itaituba (rochas carbonáticas). A análise faciológica da sucessão Moscoviana de até 40 m de espessura, exposta na região de Monte Alegre e Itaituba, Estado do Pará, permitiu identificar 5 associações de fácies (AF), que correspondem a depósitos estabelecidos no ambiente costeiro, representados por dunas/intedunas eólicas (AF1), lençóis de areia/wadi (AF2), laguna/washover (AF3), praia/planície de maré (AF4) e laguna/delta de maré (AF5). A associação de campo de dunas/interdunas (AF1) é constituída por arenitos finos a médios, bimodais com estratificação cruzada de médio porte, laminação cavalgante transladante subcrítica e arenitos com gradação inversa. Arenitos finos com acamamento maciço, marcas de raízes e, subordinadamente, verrugas de aderência (adhesion warts), ocorrem nos limites dos sets de estratificação cruzada e indicam, respectivamente, paleossolos e migração de grãos por ação eólica sobre interduna úmida. Depósitos de lençóis de areia/wadi (AF2) são compostos de arenitos finos a médios com estratificação plano-paralela e laminação cavalgante transladante subcrítica, relacionados a superfícies de deflação (lençóis de areia), enquanto arenitos finos a médios com estratificações cruzadas tangencial e recumbente, e acamamento convoluto, caracterizam rios efêmeros com alta energia. Pelitos laminados e arenitos finos com laminação cruzada cavalgante, contendo o icnofóssil Palaeophycus, representam sedimentação em ambiente de baixa energia e foram agrupados na associação de laguna/washover (AF3). Os depósitos de praia/planície de maré (AF4) consistem em arenitos finos a médios, com estratificação plano-paralela a cruzada de baixo ângulo, intercalados com lentes de dolomito fino maciço, localmente truncados por arenitos finos a médios. Estas fácies foram formadas pelo fluxo-refluxo em ambiente de praia, localmente retrabalhadas por pequenos canais, enquanto o carbonato é interpretado como precipitado em poças (ponds). Na AF4 encontram-se também pelitos laminados com gretas de contração, lâminas curvadas de argila e arenitos com estratificação cruzada tabular de pequeno a médio porte, contendo filmes de argila sobre foresets e superfícies de reativação, sugerindo a migração de sandwaves na intermaré. A associação de laguna/delta de maré (AF5) é constituída por calcários dolomitizados (mudstones, wackestones, packstones e grainstones) com poros do tipo vug e móldicos e bioclastos de braquiópodes, equinodermas, foraminíferos, ostracodes, briozoários, trilobitas, moluscos e coral isolado não fragmentado, além do ichnofóssil Thalassinoides. Conglomerados com seixos de calcário dolomitizado, arenitos finos com estratificação cruzada de baixo ângulo e superfícies de reativação, localmente sobrepostos por arenitos finos com estratificação cruzada sigmoidal e laminação cruzada cavalgante, foram interpretados como depósitos de tidal inlet e delta de maré. As associações de fácies/microfácies e os dados paleontológicos descritos neste trabalho corroboram a predominância de ambientes lagunares, em parte, conectados a um ambiente desértico costeiro para o intervalo de transição entre as formações Monte Alegre e Itaituba. A abundância de grãos arredondados de areia fina nas fácies carbonáticas corrobora influxo siliciclástico advindo do ambiente desértico adjacente ao ambiente costeiro. Condições mais quentes e tropicais para a sucessão estudada são também indicadas pela presença de carbonatos e argilominerais como illita e, principalmente, esmectita, bem como uma fauna diversificada. Os litotipos siliciclásticos e carbonáticos intercalados que caracterizam a fase final da deposição Monte Alegre e o início da sedimentação Itaituba, justificam sua representação em um mesmo sistema deposicional costeiro.

Mineralogia e geoquímica da ocorrência de palygorskita de Alcântara, bacia de S. Luís-Grajaú, Maranhão

A Formação Alcântara (bacia de São Luis-Grajaú, região de Alcântara, MA) é constituída por pelitos, arenitos e dolomitos. Esses litotipos representam uma sucessão progradacional de depósitos de laguna/washover e canal de maré sobrepondo-se a depósitos de shoreface gerados por processos de tempestade. O presente trabalho tem como objetivo principal à caracterização mineralógica e geoquímica dos argilominerais que ocorrem nos níveis pelíticos da Formação Alcântara, especialmente a palygorskita. Foi descrito e amostrado um perfil geológico na praia da Baronesa, na cidade de Alcântara, MA, no qual foram coletadas 8 amostras, que após a preparação em laboratório, foram submetidas a análises mineralógicas e químicas por difração de raios X, fluorescência de raios X, análises térmicas e microscopia eletrônica de varredura. Os resultados mostraram que o perfil da praia da Baronesa é composto por arenitos na base, seguido de pelitos dominantes, com intercalações de dolomitos. Nos pelitos, foram descritos uma ampla assembléia de argilominerais, em ambiente lagunar, com variações no conteúdo de palygorskita, clorita, illita, esmectita e traços de caulinita. Observam-se ainda traços de dolomita, calcita e feldspatos. Os teores de palygorskita e dolomita (níveis dolomíticos) são acentuados, sugerindo que as condições climáticas durante o período de deposição foram áridas a semi-áridas. Duas gerações de palygorskita foram descritas: uma na forma de bolsões ou acumulações macroscópicas nos níveis pelíticos ricos em esmectita, freqüentemente descritas na literatura, e outra na forma maciça, como o mineral dominante dos níveis pelíticos superiores do perfil da praia da Baronesa. Essa segunda geração está sendo descrita pela primeira vez, neste trabalho, podendo constituir em níveis métricos e que podem revelar interesse econômico.

Coastal geomorphology, processes and erosion at the tourist destination of Ferryland, Newfoundland and Labrador

The community of Ferryland is located on the southeastern coast of the Avalon Peninsula. The town traditionally relied on a fishing-based economy until the collapse of the fishery in the early 1990s. The present economy emphasizes sustainable development in the tourism sector with focus on archaeology, geotourism and other recreational uses. This paper discusses coastal erosion and impacts on sites and infrastructure using methods including: local knowledge, Real Time Kinematic (RTK) surveying and other survey techniques, seawater level measurement, meteorological data from a locally-installed station, custom-made drifter tube buoys, photography, HD video, and investigation using various modes of transport including inflatable boat. The major findings of the study include that the residents and stakeholders are genuinely interested in and knowledgeable of coastal erosion. The causes of coastal erosion include: large waves, surge, longshore currents, harbour oscillations, mass wasting, and location of infrastructure causing alterations of these processes. Freeze-thaw Cycles (FTC), rainfall, and gravity loosen and transport rock, till, and fill materials downslope. Large waves and currents transport the materials alongshore or into the nearshore. Harbour oscillations causing high velocity currents (> 2 m/s) are responsible for shoreline erosion and damage to property in The Pool. Historical resources such as gun batteries and ordnance pieces which date to the 1700s are being lost or threatened through coastal erosion of till and rock cliffs. Improper drainage and maintenance is responsible for erosion of roads and supporting shoulders, necessitating mitigation measures. Sediment transport and deposition during and after large wave and surge events lead to undercutting of infrastructure and increased risk of washover of existing infrastructure. Erosion is ongoing at Bois Island and Ferryland Head Isthmus through slope processes and undercutting; The Pool and the lower Colony of Avalon site through harbour oscillations and related undermining; the tombolo and the main breakwater through wave attack; and Meade’s Cove including the East Coast Trail through wave attack and undercutting. The floor of the latrine in the lower Colony of Avalon site indicates that sea level was approximately 1.25m below present in the 1620s, a relative sea level rise rate of 3.2 mm/y. The recommendations include suggested mitigation to reduce impacts specific to each site.

Geomorphological constraining of tsunami (?) run-up in the Alcantarilha coastal lowland (Central Algarve, Portugal)

The Alcantarilha lowland, partly barred by a well developed barrier, including foredunes covering Pleistocene-Holocene beachrock and aeolianite, develops across the Alcantarilha infilled estuary, the beach-dune extending further SE until the Salgados lagoon. A topographic and coring survey revealed a peculiar feature at the leeward toe of the dune ridge close to the inlet area: a sandy fan with location, shape and morphology suggesting emplacement by single or multiple overwash of the barrier tip rather than tidal forcing. Its storm or tsunami origin and age are under investigation, and the only time-constrain available at present is that it should post-date ca. 6600 cal BP, the most recent in situ aeolianite (Moura et al., 2007) dated so far. METHODS, DATA SET AND RESULTS The fan boundaries are distinctive in aerial photos and satellite images: it is roughly ellipsoidal, ~200 m wide and ~300 m elongated paralleling the shoreline, rising ~ 0.9-1.2 m above the surrounding floodplain surface. Detailed topography shows that its short axis aligns with SW-NE elongated (though irregular) depressions in the dune crest, which link the beach with the fan. This could have favoured funnelling of, or erosion by, water overtopping the barrier but, in either case, the fan should correspond to extreme and abrupt event(s) of coastal flooding. 18 trenches and cores were performed in the exposed area of the fan and nearby flood plain to obtain samples and data on its sedimentology, lithostratigraphy and geometry. The fan consists of well sorted and rounded sand (Fig. 2). It thins away and wedges out landwards of the apex (located near Alc29T) where it is partly covered by dune sand. Its lower boundary is undulating and marked by textural contrast between sand (fan) and underlying mud (alluvial/lagoonal); an accumulation of marine-sourced perforated pebbles showing limited lateral continuity may pinpoint this boundary near the foredune (core Alc 25, ca. 80 m westward of profile in Fig.1); mud-balls were also observed immediately above this surface in cores and trenches. As the washover was probably emplaced in a barred lagoonal/estuarine floodplain setting, the fan’s northern outer belt is enclosed by low-energy sediments (not shown in Fig. 2).