Produktion, skador och grenegenskaper hos 10-årig tall i ett kombinerat förbands- och avkommeförsök : Volume production, damages and branch properties in a 10-year old combined spacing and progeny trial of Scots pine

A Scots pine (Pinus sylvestris) progeny trial was established in 1990, in the southwestern part of Sweden. The offspring was from 30 plus trees. The trial is located on abandoned agricultural land and has a single tree block design with a variation in spacing. The trial has been damaged by voles. At a tree age of ten years, growth, damages and branch properties were estimated. An analysis of variance on height, diameter and stem volume shows significant difference between spacing and progenies as well as interactions between these factors. As indicated by a better annual height increment and fewer and thinner branches at each whorl the densest spacing has the highest potential to produce quality logs.There were also differences between progenies in growth and quality traits. Some progenies combined good growth and branch characters with low mortality, straight stems and few damages. Other progenies had superior volume production.

A influência da complexidade na eficiência operacional do consórcio modular

Pós-graduação em Engenharia de Produção - FEG

Análisis empírico del comportamiento de los costes en las explotaciones agrícolas mediante datos de la red contable agraria nacional

In this article an empirical analyse of farming costs is performed withinthe frame of the activity based costing, employing a panel data set ofCatalan farms. One the main conclusions of the study is that there islimited association for transaction and farm costs, especially in indirectcosts. Direct and indirect costs are mainly driven by volume production.

Teholähdesuunnittelu

Työssä vertaillaan massatuotannon näkökulmasta eri tehoalueille sopivia teholähteen toteuttamisvaihtoehtoja. Lisäksi esitellään standardien asettamia vaatimuksia teholähteille. Työssä käsitellään teholähdesuunnittelun eri osa-alueita ja niihin sopivien simulointityökalujen hyödyntämismahdollisuuksia suunnitteluprosessin osana. Simulointituloksia ja teoreettisia laskelmia vertaillaan prototyypistä suoritettuihin mittauksiin.

DFM(A)- aspects for an sma connector design

In this research, manufacturability analysis is made for an SMA connector. Analysis and aspects of applying virtual prototyping for an SMA connector design and manufacturing are also investigated. Special questionnaires for the component and machining are made in order to enable necessary information to ensure DFM(A) –aspects of products. The aspects of easy manufacturing for machining the SMA connector are collected. Material selection is discussed, and manufacturing stages of prototype manufacturing are presented. The main focus of this research is on prototype manufacturing, but also aspects considering volume production are discussed. A special purpose SMA connector is designed for printed circuit board edge mounting.

Piensarjatuotannon hitsauksen robotisointi

Diplomityön tarkoituksena on selvittää hitsauksen robotisointimahdollisuudet vakiintuneelle piensarjatuotteelle. Tarkastelun kohteeksi valittiin maanpäällisen porausyksikön runkopari, joka rakentuu ylä- ja alarungosta. Hitsaus on nykytilanteessa käsinhitsausta ja tuotetta tehdään noin 300 kpl / vuosi. Hitsauksen robotisoinnilla halutaan aikaansaada kustannussäästöä hitsauksen osalta ja tuotantokapasiteetin nousua. Työn teoriaosa voidaan jakaa neljään osaan: hitsaustekniikka, robottihitsattava tuote, robotisoituhitsaus ja investointilaskelmat. Hitsaustekniikassa lähdetään liikkeelle hitsauksen kannalta oleellisimmista perusasioista, jolloin lukijalle syntyy laajempi kokonaiskuva asiasta. Hitsauksen robotisointia suunniteltaessa korostuu tuotteen hitsattavuus. Hyvin suunniteltu tuote mahdollistaa robotisoidun hitsauksen ja luo edellytykset laadukkaalle, taloudelliselle ja tuottavalle hitsaukselle. Robotisoidun hitsauksen osassa rakennetaan kokonaisuus, jolloin lopputuloksena on tehokas robottijärjestelmä. Samalla käsitellään sekä varsinaista hitsausteknistä toteutusta että robottijärjestelmän komponentteja. Investointilaskelmien avulla varmistetaan robottijärjestelmän ja koko tuotantoketjun kannattavuus. Käytännön osuudessa selvitetään robotisoidun hitsauksen mahdollisuudet valitulle tuotteelle ja robotisoinnin aikaansaamat kustannussäästöt. Tuotteen ylärungosta valitaan etuosa tarkempaa CASE tyylistä tarkastelua varten. CASE:ssa käydään läpi etuosan valmistettavuus ja selvitetään robotisoinnista aikaansaamat säästöt. Investointilaskelmien avulla selvitetään käytännön osuudessa robotisoidun hitsauksen kannattavuus tietyille robottijärjestelmille.

Analysis and forecast of the storage needs of soybeans in Brazil

The existence of a minimum storage capacity of grains as a condition for the maintenance of regulator physical stocks has been used as a strategic factor in the agribusiness expansion. However, in Brazil the storage infrastructure has not followed the growth of the agricultural sector. This fact is evident in the case of soybeans that currently represent 49% of grain production in the country, whose volume production has been increasing significantly over the years. This study aimed to predict the futureneeds of static storage capacity of soybeans from historical data to estimate the investment needed to install storage units in Brazil for the next five years. A statistic analysis of collected data allowed a forecast and identification of the number of storage units that should be installed to meet the storage needs of soybeans in the next five years. It was concluded that by 2015 the soybean storage capacity should be 87 million tons, and to store 49% of soybeans produced, 1,104 storage units should be installed at a cost of R$ 442 million.

Green welding in practice

Efficient production and consumption of energy has become the top priority of national and international policies around the world. Manufacturing industries have to address the requirements of the government in relation to energy saving and ecologically sustainable products. These industries are also concerned with energy and material usage due to their rising costs. Therefore industries have to find solutions that can support environmental preservation yet maintain competitiveness in the market. Welding, a major manufacturing process, consumes a great deal of material and energy. It is a crucial process in improving a product’s life-cycle cost, strength, quality and reliability. Factors which lead to weld related inefficiencies have to be effectively managed, if industries are to meet their quality requirements and fulfil a high-volume production demand. Therefore it is important to consider some practical strategies in welding process for optimization of energy and material consumption. The main objective of this thesis is to explore the methods of minimizing the ecological footprint of the welding process and methods to effectively manage its material and energy usage in the welding process. The author has performed a critical review of the factors including improved weld power source efficiency, efficient weld techniques, newly developed weld materials, intelligent welding systems, weld safety measures and personnel training. The study lends strong support to the fact that the use of eco-friendly welding units and the quality weld joints obtained with minimum possible consumption of energy and materials should be the main directions of improvement in welding systems. The study concludes that, gradually implementing the practical strategies mentioned in this thesis would help the manufacturing industries to achieve on the following - reduced power consumption, enhanced power control and manipulation, increased deposition rate, reduced cycle time, reduced joint preparation time, reduced heat affected zones, reduced repair rates, improved joint properties, reduced post-weld operations, improved automation, improved sensing and control, avoiding hazardous conditions and reduced exposure of welder to potential hazards. These improvement can help in promotion of welding as a green manufacturing process.

Influence of surface texture on the galling characteristics of lean duplex and austenitic stainless steels

Two simulative test methods were used to study galling in sheet forming of two types of stainlesssteel sheet: austenitic (EN 1.4301) and lean duplex LDX 2101 (EN 1.4162) in different surface conditions. Thepin-on-disc test was used to analyse the galling resistance of different combinations of sheet materials and lubricants. The strip reduction test, a severe sheet forming tribology test was used to simulate the conditionsduring ironing. This investigation shows that the risk of galling is highly dependent on the surface texture of theduplex steel. Trials were also performed in an industrial tool used for high volume production of pumpcomponents, to compare forming of LDX 2101 and austenitic stainless steel with equal thickness. The forming forces, the geometry and the strains in the sheet material were compared for the same component.It was found that LDX steels can be formed to high strain levels in tools normally applied for forming ofaustenitic steels, but tool adaptations are needed to comply with the higher strength and springback of thematerial.

Organização de produtores rurais para a gestão da cadeia produtiva da mandioca no nordeste paraense: um estudo de caso na Associação de Desenvolvimento Comunitário e Rural Bom Jesus

A mandioca (Manihot esculenta Crantz) é uma planta cultivada predominantemente para a subsistência dos trabalhadores rurais sendo uma das principais fontes de carboidratos disponíveis aos estratos sociais de baixa renda e tem importante participação na geração de emprego e renda. O Estado do Pará destaca-se pelo volume de produção de mandioca, mas o cultivo ainda está voltado essencialmente para a subsistência sendo pouco explorado como matéria prima em derivados industriais e insumo para enfrentar problemas globais como a fome, a degradação ambiental e a produção de energia, gerando emprego e renda para comunidades locais e rurais. Este estudo tem como objetivo avaliar como está se desenvolvendo a organização de produtores rurais de mandioca da Associação de Desenvolvimento Comunitário e Rural Bom Jesus, através do modelo de gestão de cadeia produtiva e compreender em que medida se justifica economicamente o cultivo de mandioca. A pesquisa é de natureza exploratória e descritiva e por meio do questionário e entrevista aplicado a 17 produtores rurais juntamente com a fundamentação teórica sobre o entendimento contemporâneo de cadeia produtiva foram percebidos evidências que justificam economicamente, em parte, o cultivo da mandioca. A geração de postos de trabalhos para as mulheres, a utilização de resíduos como incremento no arranjo produtivo, a apoio da extensão e do crédito rural, e as vantagens advindas da organização dos produtores rurais proporcionando renda e produção constantes no campo, foram os fatores considerados. Porém, a necessidade de inovações tecnológicas, parcerias com os setores industriais, arranjos produtivos mais rentáveis, mecanização do plantio e da colheita, os problemas ambientais (resíduos tóxicos e desmatamento) e de acesso à pesquisa, o nível de escolaridade, e a cooperação entre os agricultores, são desafios reais a serem enfrentados e o fator decisivo é o apoio governamental. Este estudo demonstra a realidade de uma sociedade quase sempre marginalizada e esquecida pelas políticas públicas. Além da variável econômica, a avaliação das culturas produtivas deve passar pelos filtros de análise social e ambiental, pois assim, nos permite com maior exatidão compreender os problemas reais da nossa sociedade, em especial da vida na Amazônia.

Estudo de adsorvente obtido de terras diatomáceas para remoção de metais pesados em águas produzidas: processamento, caracterização e dinâmica em leito fixo

The acceleration of industrial growth in recent decades on all continents aroused the interest of the companies to counter the impacts produced on the environment, spurred primarily by major disasters in the petroleum industry. In this context, the water produced is responsible for the largest volume of effluent from the production and extraction of oil and natural gas. This effluent has in its composition some critical components such as inorganic salts, heavy metals (Fe, Cu, Zn, Pb, Cd, ), presence of oil and chemicals added in the various production processes. In response to impact, have been triggered by research alternative adsorbent materials for water treatment and water produced, in order to removing oils and acids and heavy metals. Many surveys of diatomaceous earth (diatomite) in Brazil involve studies on the physico-chemical, mineral deposits, extraction, processing and applications. The official estimated Jazi are around 2.5 million tonnes, the main located in the states of Bahia (44%) and Rio Grande do Norte (37,4%). Moreover, these two states appear as large offshore producers, earning a prominent role in research of adsorbents such as diatomite for treatment of water produced. Its main applications are as an agent of filtration, adsorption of oils and greases, industrial load and thermal insulator. The objective of this work was the processing and characterization of diatomite diatomaceous earth obtained from the municipality of Macaíba-RN (known locally as tabatinga) as a low cost regenerative adsorbent for removal of heavy metals in the application of water produced treatment. In this work we adopted a methodology for batch processing, practiced by small businesses located in producing regions of Brazil. The characterization was made by X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area (BET). Research conducted showed that the improvement process used was effective for small volume production of diatomite concentrated. The diatomite obtained was treated by calcination at temperature of 900 oC for 2 hours, with and without fluxing Na2CO3 (4%), according to optimal results in the literature. Column adsorption experiments were conducted to percolation of the in nature, calcined and calcined fluxing diatomites. Effluent was used as a saline solution containing ions of Cu, Zn, Na, Ca and Mg simulating the composition of produced waters in the state of Rio Grande do Norte, Brazil. The breakthrough curves for simultaneous removal of copper ions and zinc as a result, 84.3% for calcined diatomite and diatomite with 97.3 % for fluxing. The calcined fluxing diatomite was more efficient permeability through the bed and removal of copper and zinc ions. The fresh diatomite had trouble with the permeability through the bed under the conditions tested, compared with the other obtained diatomite. The results are presented as promising for application in the petroleum industry

Aplicação da parafina e do óleo de linhaça como hidrofobizantes da vermiculita, para remoção de derivados de óleo diesel resentes em água produzida sintética

Produced water has lately aroused interest due to their high degree of salinity, suspended oil particles, chemicals added in various manufacturing processes, heavy metals and radioactivity sometimes. Along with oil and due to its high volume production, water production is one of the pollutants of most concern in the process of oil extraction. PAHs due to their ubiquity and their characteristics carcinogenic or mutagenic and teratogenic even have attracted the attention of every scientific society. Formed from the incomplete combustion of organic matter may be natural or anthropogenic. Some materials have been researched with the goal of cleaning up environmental matrices that may be contaminated by hydrocarbons. Among these materials researched various clays have been employed, of which highlights the vermiculite. The family of phyllosilicates, vermiculite for its potential and its high hydrophobic surface area has been a tool widely used in the decontamination of water in processes of oil spills. However, when it loses its capacity expanded hydrophobic having the necessity of using a hidrofobizante to make it organophilic. Among the numerous hidrofobizantes researched and used the linseed oil was the pioneer. In this study sought to evaluate the capacity of removal of PAHs using the vermiculite hydrofobized with linseed oil and wax also, for it was made use of the 24 full factorial design as the main tool for the experiments. We also evaluated the clay grain size (-20 +48 and -48 +80 #), the percentage of hidrofobizante applied (5 and 10%) and salinity of the water produced synthesized in our laboratory (35,000 and 55,000 ppm). The molecular fluorescence spectroscopy due to its sensitivity and speed was used to verify the adsorption capacity of clay, as well as gas chromatography served as an auxiliary technique to identify and quantify the PAHs in solution. In order to characterize the vermiculite was made use of X-ray fluorescence and X-ray diffraction. The infrared and thermogravimetry were essential to note hydrophobization and the amount of coating of clay. According to the fluorescence analysis showed that the test 12 was the best result in about 98% adsorption of fluorescent compounds, however the high salinity, the smallest particle size, the highest percentage of hidrofobizante and the use of linseed oil showed greater efficiency in the removal capacity of these hydrocarbons, in accordance with the trend followed by the analysis of the major factors of the factorial design. To verify the adsorption capacity of clay using a fixed volume of water produced synthetically, used as the test base 12, at their respective levels and factors. Thus, it was observed that after adding about 1 ½ liters of water solution produced synthetically, about 300 times its volume in mass, the vermiculite was able to adsorb 80% of fluorescent species present in solution

Adubação com NPK em coqueiro-anão-verde (Cocos nucifera L.) rendimento e qualidade de frutos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evolución reciente y retos de la industria manufacturera de exportación en Centroamérica, México y República Dominicana: una perspectiva regional y sectorial

Incluye Bibliografía

Desenvolvimento e caracterização de compósito processados por RTM para aplicação aeroespacial

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)