Messung der B s-Oszillation mit dem semileptonischen Zerfall B 0 s D - s (phi pi -) my + ny my mit dem D0-Detektor

Das Standardmodell (SM) der Teilchenphysik beschreibt sehr präzise die fundamentalen Bausteine und deren Wechselwirkungen (WW). Trotz des Erfolges gibt es noch offene Fragen, die vom SM nicht beantwortet werden können. Ein noch noch nicht abgeschlossener Test besteht aus der Messung der Stärke der schwachen Kopplung zwischen Quarks. Neutrale B- bzw. $bar{B}$-Mesonen können sich innerhalb ihrer Lebensdauer über einen Prozeß der schwachen WW in ihr Antiteilchen transformieren. Durch die Messung der Bs-Oszillation kann die Kopplung Vtd zwischen den Quarksorten Top (t) und Down (d) bestimmt werden. Alle bis Ende 2005 durchgeführten Experimente lieferten lediglich eine untere Grenze für die Oszillationsfrequenz von ms>14,4ps-1. Die vorliegenden Arbeit beschreibt die Messung der Bs-Oszillationsfrequenz ms mit dem semileptonischen Kanal BsD(-)+. Die verwendeten Daten stammen aus Proton-Antiproton-Kollisionen, die im Zeitraum von April 2002 bis März 2006 mit dem DØ-Detektor am Tevatron-Beschleuniger des Fermi National Accelerator Laboratory bei einer Schwerpunktsenergie von $sqrt{s}$=1,96TeV aufgezeichnet wurden. Die verwendeten Datensätze entsprechen einer integrierten Luminosität von 1,3fb-1 (620 millionen Ereignisse). Für diese Oszillationsmessung wurde der Quarkinhalt des Bs-Mesons zur Zeit der Produktion sowie des Zerfalls bestimmt und die Zerfallszeit wurde gemessen. Nach der Rekonstruktion und Selektion der Signalereignisse legt die Ladung des Myons den Quarkinhalt des Bs-Mesons zur Zeit des Zerfalls fest. Zusätzlich wurde der Quarkinhalt des Bs-Mesons zur Zeit der Produktion markiert. b-Quarks werden in $pbar{p}$-Kollisionen paarweise produziert. Die Zerfallsprodukte des zweiten b-Hadrons legen den Quarkinhalt des Bs-Mesons zur Zeit der Produktion fest. Bei einer Sensitivität von msenss=14,5ps-1 wurde eine untere Grenze für die Oszillationsfrequenz ms>15,5ps-1 bestimmt. Die Maximum-Likelihood-Methode lieferte eine Oszillationsfrequenz ms>(20+2,5-3,0(stat+syst)0,8(syst,k))ps-1 bei einem Vertrauensniveau von 90%. Der nicht nachgewiesene Neutrinoimpuls führt zu dem systematischen Fehler (sys,k). Dieses Resultat ergibt zusammen mit der entsprechenden Oszillation des Bd-Mesons eine signifikante Messung der Kopplung Vtd, in Übereinstimmung mit weiteren Experimenten über die schwachen Quarkkopplungen.

Measurement of the t-channel single-top-quark production cross section and of the |V (tb)| CKM matrix element in pp collisions at root s=8 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Measurement of the oscillation frequency of B s mesons in the hadronic decay mode B s pi D s (phi pi) X with the D0 detector at the Fermilab Tevatron collider

The standard model (SM) of particle physics is a theory, describing three out of four fundamental forces. In this model the Cabibbo-Kobayashi-Maskawa (CKM) matrix describes the transformation between the mass and weak eigenstates of quarks. The matrix properties can be visualized as triangles in the complex plane. A precise measurement of all triangle parameters can be used to verify the validity of the SM. The least precisely measured parameter of the triangle is related to the CKM element |Vtd|, accessible through the mixing frequency (oscillation) of neutral B mesons, where mixing is the transition of a neutral meson into its anti-particle and vice versa. It is possible to calculate the CKM element |Vtd| and a related element |Vts| by measuring the mass differences Dmd (Dms ) between neutral Bd and bar{Bd} (Bs and bar{Bs}) meson mass eigenstates. This measurement is accomplished by tagging the initial and final state of decaying B mesons and determining their lifetime. Currently the Fermilab Tevatron Collider (providing pbar{p} collisions at sqrt{s}=1.96 TeV) is the only place, where Bs oscillations can be studied. The first selection of the "golden", fully hadronic decay mode Bs->Ds pi(phi pi)X at DØ is presented in this thesis. All data, taken between April 2002 and August 2007 with the DØ detector, corresponding to an integrated luminosity of int{L}dt=2.8/fb is used. The oscillation frequency Dms and the ratio |Vtd|/|Vts| are determined as Dms = (16.6 +0.5-0.4(stat) +0.4-0.3(sys)) 1/ps, |Vtd|/|Vts| = 0.213 +0.004-0.003(exp)pm 0.008(theor). These results are consistent with the standard model expectations and no evidence for new physics is observable.

Review of lattice results concerning low-energy particle physics

We review lattice results related to pion, kaon, D- and B-meson physics with the aim of making them easily accessible to the particle-physics community. More specifically, we report on the determination of the lightquark masses, the form factor f+(0), arising in semileptonic K → π transition at zero momentum transfer, as well as the decay-constant ratio fK / fπ of decay constants and its consequences for the CKM matrix elements Vus and Vud. Furthermore, we describe the results obtained on the lattice for some of the low-energy constants of SU(2)L × SU(2)R and SU(3)L×SU(3)R Chiral Perturbation Theory and review the determination of the BK parameter of neutral kaon mixing. The inclusion of heavy-quark quantities significantly expands the FLAG scope with respect to the previous review. Therefore, we focus here on D- and B-meson decay constants, form factors, and mixing parameters, since these are most relevant for the determination of CKM matrix elements and the global CKM unitarity-triangle fit. In addition we review the status of lattice determinations of the strong coupling constant αs.

Measurement of the Single Top Quark Production Cross Section at CDF

We report a measurement of the single top quark production cross section in 2.2 ~fb-1 of p-pbar collision data collected by the Collider Detector at Fermilab at sqrt{s}=1.96 TeV. Candidate events are classified as signal-like by three parallel analyses which use likelihood, matrix element, and neural network discriminants. These results are combined in order to improve the sensitivity. We observe a signal consistent with the standard model prediction, but inconsistent with the background-only model by 3.7 standard deviations with a median expected sensitivity of 4.9 standard deviations. We measure a cross section of 2.2 +0.7 -0.6(stat+sys) pb, extract the CKM matrix element value |V_{tb}|=0.88 +0.13 -0.12 (stat+sys) +- 0.07(theory), and set the limit |V_{tb}|>0.66 at the 95% C.L.

Observation of single top quark production and measurement of |Vtb| with CDF

We report the observation of electroweak single top quark production in 3.2  fb-1 of pp̅ collision data collected by the Collider Detector at Fermilab at √s=1.96  TeV. Candidate events in the W+jets topology with a leptonically decaying W boson are classified as signal-like by four parallel analyses based on likelihood functions, matrix elements, neural networks, and boosted decision trees. These results are combined using a super discriminant analysis based on genetically evolved neural networks in order to improve the sensitivity. This combined result is further combined with that of a search for a single top quark signal in an orthogonal sample of events with missing transverse energy plus jets and no charged lepton. We observe a signal consistent with the standard model prediction but inconsistent with the background-only model by 5.0 standard deviations, with a median expected sensitivity in excess of 5.9 standard deviations. We measure a production cross section of 2.3-0.5+0.6(stat+sys)  pb, extract the value of the Cabibbo-Kobayashi-Maskawa matrix element |Vtb|=0.91-0.11+0.11(stat+sys)±0.07  (theory), and set a lower limit |Vtb|>0.71 at the 95% C.L., assuming mt=175  GeV/c2.

Observation of single top quark production and measurement of |Vtb| with CDF

We report the observation of electroweak single top quark production in 3.2 fb-1 of ppbar collision data collected by the Collider Detector at Fermilab at sqrt{s}=1.96 TeV. Candidate events in the W+jets topology with a leptonically decaying W boson are classified as signal-like by four parallel analyses based on likelihood functions, matrix elements, neural networks, and boosted decision trees. These results are combined using a super discriminant analysis based on genetically evolved neural networks in order to improve the sensitivity. This combined result is further combined with that of a search for a single top quark signal in an orthogonal sample of events with missing transverse energy plus jets and no charged lepton. We observe a signal consistent with the standard model prediction but inconsistent with the background-only model by 5.0 standard deviations, with a median expected sensitivity in excess of 5.9 standard deviations. We measure a production cross section of 2.3+0.6-0.5(stat+sys) pb, extract the CKM matrix element value |Vtb|=0.91+0.11-0.11 (stat+sys)+-0.07(theory), and set a lower limit |Vtb|>0.71 at the 95% confidence level, assuming m_t=175 GeVc^2.

Measurement of the Single-Top-Quark Production Cross Section at CDF

We report a measurement of the single top quark production cross section in 2.2 ~fb-1 of p-pbar collision data collected by the Collider Detector at Fermilab at sqrt{s}=1.96 TeV. Candidate events are classified as signal-like by three parallel analyses which use likelihood, matrix element, and neural network discriminants. These results are combined in order to improve the sensitivity. We observe a signal consistent with the standard model prediction, but inconsistent with the background-only model by 3.7 standard deviations with a median expected sensitivity of 4.9 standard deviations. We measure a cross section of 2.2 +0.7 -0.6(stat+sys) pb, extract the CKM matrix element value |V_{tb}|=0.88 +0.13 -0.12 (stat+sys) +- 0.07(theory), and set the limit |V_{tb}|>0.66 at the 95% C.L.

Observation of Electroweak Single Top-Quark Production

We report the first observation of single top quark production using 3.2 fb^-1 of pbar p collision data with sqrt{s}=1.96 TeV collected by the Collider Detector at Fermilab. The significance of the observed data is 5.0 standard deviations, and the expected sensitivity for standard model production and decay is in excess of 5.9 standard deviations. Assuming m_t=175 GeV/c^2, we measure a cross section of 2.3 +0.6 -0.5 (stat+syst) pb, extract the CKM matrix element value |V_{tb}|=0.91 +-0.11 (stat+syst) 0.07(theory), and set the limit |V_{tb}|>0.71 at the 95% C.L.

Measurement of the neutron beta decay asymmetry using ultracold neutrons

The free neutron beta decay correlation A₀ between neutron polarization and electron emission direction provides the strongest constraint on the ratio λ = g_A/g_V of the Axial-vector to Vector coupling constants in Weak decay. In conjunction with the CKM Matrix element V_ud and the neutron lifetime τ_n, λ provides a test of Standard Model assumptions for the Weak interaction. Leading high-precision measurements of A₀ and τ_n in the 1995-2005 time period showed discrepancies with prior measurements and Standard Model predictions for the relationship between λ, τ_n, and V_ud. The UCNA experiment was developed to measure A₀ from decay of polarized ultracold neutrons (UCN), providing a complementary determination of λ with different systematic uncertainties from prior cold neutron beam experiments. This dissertation describes analysis of the dataset collected by UCNA in 2010, with emphasis on detector response calibrations and systematics. The UCNA measurement is placed in the context of the most recent τ_n results and cold neutron A₀ experiments.

Mesure du rapport d'embranchement des désintégrations B^0--> pi^- l^+v et B^+--> êta^(') l^+v, du spectre des facteurs de forme des désintégrations B^0--> pi^- l^+v et B^+--> êta l^+v, et extraction de |V_ub| dans l'expérience BABAR

Nous rapportons les résultats d'une étude des désintégrations semileptoniques non-charmées B^+--> êta^(') l^+v et B^0--> pi^- l^+v, mesurés par le détecteur BABAR avec une production d'environ 464 millions de paires de mésons BBbar issues des collisions e^+e^- à la résonance Upsilon(4S). L'analyse reconstruit les événements avec une technique relâchée des neutrinos. Nous obtenons les rapports d'embranchement partiels pour les désintégrations B^+--> êta l^+v et B^0--> pi^- l^+v en trois et douze intervalles de q^2, respectivement, à partir desquels nous extrayons les facteurs de forme f_+(q^2) et les rapports d'embranchement totaux B(B^+--> êta l^+v) = (3.39 +/- 0.46_stat +/- 0.47_syst) x 10^-5 et B(B^0--> pi^- l^+v) = (1.42 +/- 0.05_stat +/- 0.08_syst) x 10^-4. Nous mesurons aussi B(B^+--> êta' l^+v) = (2.43 +/- 0.80_stat +/- 0.34_syst) x 10^-5. Nous obtenons les valeurs de la norme de l'élément |V_ub| de la matrice CKM en utilisant trois calculs différents de la CDQ.

Hierarchy and anarchy in quark mass matrices, or can hierarchy tolerate anarchy?

The consequences of adding random perturbations (anarchy) to a baseline hierarchical model of quark masses and mixings are explored. Even small perturbations of the order of 5% of the smallest non-zero element can already give deviations significantly affecting parameters of the Cabibbo-Kobayashi-Maskawa (CKM) matrix, so any process generating the anarchy should in general be limited to this order of magnitude. The regularities of quark masses and mixings thus appear to be far from a generic feature of randomness in the mass matrices, and more likely indicate an underlying order. (C) 2001 Published by Elsevier B.V. B.V.

The flavor problem and discrete symmetries

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Light-Front model of transition form-factors in heavy meson decay

Electroweak transition form factors of heavy meson decays are important ingredients in the extraction of the Cabibbo-Kobayashi-Maskawa (CKM) matrix elements from experimental data. In this work, within a. light-front framework, we calculate electroweak transition form factor for the semileptonic decay of D mesons into a pion or a kaon. The model results underestimate in both cases the new data of CLEO for the larger momentum transfers accessible in the experiment. We discuss possible reasons for that in order to improve the model.

Precision Measurement of the Ratio B(t -> Wb)/B(t -> Wq) and Extraction of V-tb

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)