Sensory imagery in individuals who are blind and sighted: examining unimodal and multimodal forms

Introduction: Previous research has suggested that visual images are more easily generated, more vivid and more memorable than other sensory modalities. This research examined whether or not imagery is experienced in similar ways by people with and without sight. Specifically, the imabeability of visual, auditory and tactile cue words was compared. The degree to which images were multimodal or unimodal was also examined. Method: Twelve participants totally blind from early infancy and 12 sighted participants generated images in response to 53 sensory and non sensory words, rating imageability and the sensory modality, and describing images. From these 53 items, 4 subgroups of words, which stimulated images that were predominantly visual, tactile, auditory and low-imagery, respectively, were created. Results: T-tests comparing imageability ratings from blind and sighted participants found no differences for auditory and tactile words (both p>.1). Nevertheless, whilst participants without sight found auditory and tactile images equally imageable, sighted participants found images in response to tactile cue words harder to generate than visual cue words (mean difference: -0.51, p=.025). Participants with sight were also more likely to develop multisensory images than were participants without sight (both U≥15.0, N1=12, N2=12, p≤.008). Discussion: For both the blind and sighted, auditory and tactile images were rich and varied and similar language was used. Sighted participants were more likely to generate multimodal images. This was particularly the case for tactile words. Nevertheless, cue words that resulted in multisensory images were not necessarily rated as more imageable. The discussion considers whether or not multimodal imagery represent a method of compensating for impoverished unimodal imagery. Implications for Practitioners: Imagery is important not only as a mnemonic in memory rehabilitation, but also everyday uses for things such as autobiographical memory. This research emphasises both the importance of not only auditory and tactile sensory imagery, but also spatial imagery for people without sight.

Worldwide evidence of a unimodal relationship between productivity and plant species richness

The search for predictions of species diversity across environmental gradients has challenged ecologists for decades. The humped-back model (HBM) suggests that plant diversity peaks at intermediate productivity; at low productivity few species can tolerate the environmental stresses, and at high productivity a few highly competitive species dominate. Over time the HBM has become increasingly controversial, and recent studies claim to have refuted it. Here, by using data from coordinated surveys conducted throughout grasslands worldwide and comprising a wide range of site productivities, we provide evidence in support of the HBM pattern at both global and regional extents. The relationships described here provide a foundation for further research into the local, landscape, and historical factors that maintain biodiversity.

Worldwide evidence of a unimodal relationship between productivity and plant species richness

The search for predictions of species diversity across environmental gradients has challenged ecologists for decades. The humped-back model (HBM) suggests that plant diversity peaks at intermediate productivity; at low productivity few species can tolerate the environmental stresses, and at high productivity a few highly competitive species dominate. Over time the HBM has become increasingly controversial, and recent studies claim to have refuted it. Here, by using data from coordinated surveys conducted throughout grasslands worldwide and comprising a wide range of site productivities, we provide evidence in support of the HBM pattern at both global and regional extents. The relationships described here provide a foundation for further research into the local, landscape, and historical factors that maintain biodiversity.

The paradox of the binomial Ixodes ricinus activity and the observed unimodal Lyme borreliosis season in Hungary

The change of ambient temperature plays a key role in determining the run of the annual Lyme season. Our aim was to explain the apparent contradiction between the annual unimodal Lyme borreliosis incidence and the bimodal Ixodes ricinus tick activity run – both observed in Hungary – by distinguishing the temperaturedependent seasonal human and tick activity, the temperature-independent factors, and the multiplicative effect of human outdoor activity in summer holiday, using data from Hungary in the period of 1998–2012. This separation was verified by modeling the Lyme incidence based on the separated factors, and comparing the run of the observed and modeled incidence. We demonstrated the bimodality of tick season by using the originally unimodal Lyme incidence data. To model the outdoor human activity, the amount of camping guest nights was used, which showed an irregular run from mid-June to September. The human outdoor activity showed a similar exponential correlation with ambient temperature to that what the relative incidence did. It was proved that summer holiday has great influence on Lyme incidence.

The paradox of the binomial Ixodes ricinus activity and the observed unimodal Lyme borreliosis season in Hungary

The change of ambient temperature plays a key role in determining the run of the annual Lyme season. Our aim was to explain the apparent contradiction between the annual unimodal Lyme borreliosis incidence and the bimodal Ixodes ricinus tick activity run – both observed in Hungary – by distinguishing the temperaturedependent seasonal human and tick activity, the temperature-independent factors, and the multiplicative effect of human outdoor activity in summer holiday, using data from Hungary in the period of 1998–2012. This separation was verified by modeling the Lyme incidence based on the separated factors, and comparing the run of the observed and modeled incidence. We demonstrated the bimodality of tick season by using the originally unimodal Lyme incidence data. To model the outdoor human activity, the amount of camping guest nights was used, which showed an irregular run from mid-June to September. The human outdoor activity showed a similar exponential correlation with ambient temperature to that what the relative incidence did. It was proved that summer holiday has great influence on Lyme incidence.

Formation mechanisms of secondary organic aerosols in relation to laser printer emissions

Due to their large surface area, complex chemical composition and high alveolar deposition rate, ultrafine particles (UFPs) (< 0.1 ìm) pose a significant risk to human health and their toxicological effects have been acknowledged by the World Health Organisation. Since people spend most of their time indoors, there is a growing concern about the UFPs present in some indoor environments. Recent studies have shown that office machines, in particular laser printers, are a significant indoor source of UFPs. The majority of printer-generated UFPs are organic carbon and it is unlikely that these particles are emitted directly from the printer or its supplies (such as paper and toner powder). Thus, it was hypothesised that these UFPs are secondary organic aerosols (SOA). Considering the widespread use of printers and human exposure to these particles, understanding the processes involved in particle formation is of critical importance. However, few studies have investigated the nature (e.g. volatility, hygroscopicity, composition, size distribution and mixing state) and formation mechanisms of these particles. In order to address this gap in scientific knowledge, a comprehensive study including state-of-art instrumental methods was conducted to characterise the real-time emissions from modern commercial laser printers, including particles, volatile organic compounds (VOCs) and ozone (O3). The morphology, elemental composition, volatility and hygroscopicity of generated particles were also examined. The large set of experimental results was analysed and interpreted to provide insight into: (1) Emissions profiles of laser printers: The results showed that UFPs dominated the number concentrations of generated particles, with a quasi unimodal size distribution observed for all tests. These particles were volatile, non-hygroscopic and mixed both externally and internally. Particle microanalysis indicated that semi-volatile organic compounds occupied the dominant fraction of these particles, with only trace quantities of particles containing Ca and Fe. Furthermore, almost all laser printers tested in this study emitted measurable concentrations of VOCs and O3. A positive correlation between submicron particles and O3 concentrations, as well as a contrasting negative correlation between submicron particles and total VOC concentrations were observed during printing for all tests. These results proved that UFPs generated from laser printers are mainly SOAs. (2) Sources and precursors of generated particles: In order to identify the possible particle sources, particle formation potentials of both the printer components (e.g. fuser roller and lubricant oil) and supplies (e.g. paper and toner powder) were investigated using furnace tests. The VOCs emitted during the experiments were sampled and identified to provide information about particle precursors. The results suggested that all of the tested materials had the potential to generate particles upon heating. Nine unsaturated VOCs were identified from the emissions produced by paper and toner, which may contribute to the formation of UFPs through oxidation reactions with ozone. (3) Factors influencing the particle emission: The factors influencing particle emissions were also investigated by comparing two popular laser printers, one showing particle emissions three orders of magnitude higher than the other. The effects of toner coverage, printing history, type of paper and toner, and working temperature of the fuser roller on particle number emissions were examined. The results showed that the temperature of the fuser roller was a key factor driving the emission of particles. Based on the results for 30 different types of laser printers, a systematic positive correlation was observed between temperature and particle number emissions for printers that used the same heating technology and had a similar structure and fuser material. It was also found that temperature fluctuations were associated with intense bursts of particles and therefore, they may have impact on the particle emissions. Furthermore, the results indicated that the type of paper and toner powder contributed to particle emissions, while no apparent relationship was observed between toner coverage and levels of submicron particles. (4) Mechanisms of SOA formation, growth and ageing: The overall hypothesis that UFPs are formed by reactions with the VOCs and O3 emitted from laser printers was examined. The results proved this hypothesis and suggested that O3 may also play a role in particle ageing. In addition, knowledge about the mixing state of generated particles was utilised to explore the detailed processes of particle formation for different printing scenarios, including warm-up, normal printing, and printing without toner. The results indicated that polymerisation may have occurred on the surface of the generated particles to produce thermoplastic polymers, which may account for the expandable characteristics of some particles. Furthermore, toner and other particle residues on the idling belt from previous print jobs were a very clear contributing factor in the formation of laser printer-emitted particles. In summary, this study not only improves scientific understanding of the nature of printer-generated particles, but also provides significant insight into the formation and ageing mechanisms of SOAs in the indoor environment. The outcomes will also be beneficial to governments, industry and individuals.

The role of the posterior superior temporal sulcus in audiovisual processing

In this study we investigate previous claims that a region in the left posterior superior temporal sulcus (pSTS) is more activated by audiovisual than unimodal processing. First, we compare audiovisual to visual-visual and auditory-auditory conceptual matching using auditory or visual object names that are paired with pictures of objects or their environmental sounds. Second, we compare congruent and incongruent audiovisual trials when presentation is simultaneous or sequential. Third, we compare audiovisual stimuli that are either verbal (auditory and visual words) or nonverbal (pictures of objects and their associated sounds). The results demonstrate that, when task, attention, and stimuli are controlled, pSTS activation for audiovisual conceptual matching is 1) identical to that observed for intramodal conceptual matching, 2) greater for incongruent than congruent trials when auditory and visual stimuli are simultaneously presented, and 3) identical for verbal and nonverbal stimuli. These results are not consistent with previous claims that pSTS activation reflects the active formation of an integrated audiovisual representation. After a discussion of the stimulus and task factors that modulate activation, we conclude that, when stimulus input, task, and attention are controlled, pSTS is part of a distributed set of regions involved in conceptual matching, irrespective of whether the stimuli are audiovisual, auditory-auditory or visual-visual.

Integrating visual and tactile information in the perirhinal cortex

By virtue of its widespread afferent projections, perirhinal cortex is thought to bind polymodal information into abstract object-level representations. Consistent with this proposal, deficits in cross-modal integration have been reported after perirhinal lesions in nonhuman primates. It is therefore surprising that imaging studies of humans have not observed perirhinal activation during visual-tactile object matching. Critically, however, these studies did not differentiate between congruent and incongruent trials. This is important because successful integration can only occur when polymodal information indicates a single object (congruent) rather than different objects (incongruent). We scanned neurologically intact individuals using functional magnetic resonance imaging (fMRI) while they matched shapes. We found higher perirhinal activation bilaterally for cross-modal (visual-tactile) than unimodal (visual-visual or tactile-tactile) matching, but only when visual and tactile attributes were congruent. Our results demonstrate that the human perirhinal cortex is involved in cross-modal, visual-tactile, integration and, thus, indicate a functional homology between human and monkey perirhinal cortices.

Large-volume methacrylate monolith for plasmid purification : process engineering approach to synthesis and application

The extent of exothermicity associated with the construction of large-volume methacrylate monolithic columns has somewhat obstructed the realisation of large-scale rapid biomolecule purification especially for plasmid-based products which have proven to herald future trends in biotechnology. A novel synthesis technique via a heat expulsion mechanism was employed to prepare a 40 mL methacrylate monolith with a homogeneous radial pore structure along its thickness. Radial temperature gradient was recorded to be only 1.8 °C. Maximum radial temperature recorded at the centre of the monolith was 62.3 °C, which was only 2.3 °C higher than the actual polymerisation temperature. Pore characterisation of the monolithic polymer showed unimodal pore size distributions at different radial positions with an identical modal pore size of 400 nm. Chromatographic characterisation of the polymer after functionalisation with amino groups displayed a persistent dynamic binding capacity of 15.5 mg of plasmid DNA/mL. The maximum pressure drop recorded was only 0.12 MPa at a flow rate of 10 mL/min. The polymer demonstrated rapid separation ability by fractionating Escherichia coli DH5α-pUC19 clarified lysate in only 3 min after loading. The plasmid sample collected after the fast purification process was tested to be a homogeneous supercoiled plasmid with DNA electrophoresis and restriction analysis.