On the type material of Scyllarides deceptor Holthuis, 1963 (Crustacea: Decapoda: Scyllaridae)

The only specimen listed in the original description of Scyllarides deceptor Holthuis, 1963 is the holotype from São Paulo, Brazil, presently housed in the Leiden Museum. From the original description, however, it is clear that the new species was actually based on a number of additional specimens. Six of them exist in the collections of the Museum of Zoology in São Paulo, and are shown herein to be paratypes of S. deceptor. Scyllarides deceptor and S. brasiliensis Rathbun, 1906, continue to be confounded with one another, in consequence of their very similar color patterns and locally sympatric distributions. As many as 251,786 tons of slipper lobsters have been landed in Santa Catarina between 2000 and 2007. These catches have been attributed to S. deceptor alone and did not take into consideration the existence of a second species in the area, S. brasiliensis. Correct recognition of slipper-lobster species will be critical to properly evaluate the lobster stocks in southeastern Brazil. An opportunity is taken herein to elaborate on the taxonomy of S. deceptor and S. brasiliensis.

Catalogue of the type material of Phasmatodea (Insecta) deposited in Brazilian museums

The type material of Phasmatodea deposited in Brazilian museums and institutions is listed for the first time. New synonyms are proposed: Phibalosoma paulense Toledo Piza, 1938, Phibalosoma rochai Toledo Piza, 1938, Bacteria tuberculata Toledo Piza, 1938 and Bacteria tuberculata var. argentina Toledo Piza, 1938 are junior synonyms of Cladomorphus phyllinus (Gray, 1835). Nineteen new combinations are established.

Redescription of the type-material of creptotrema creptotrema travassos, Artigas & Pereira, 1928 (Digenea, Allocreadiidae)

Creptotrema creptotrema Travassos, Artigas & Pereira, 1928, a digenetic trematode parasite of Leporinus elongatus, is redescribed from the type-material with additional morphological data and original figures.

Review of the type material of three species of Polietina Schnabl & Dziedzicki (Diptera, Muscidae)

The type material of three species of Polietina Schnabl & Dziedzicki, 1911 was examined. Polietina flavidicincta (Stein, 1904) is redescribed and a lectotype is designated; P. stellata (Couri, 1982) is considered junior synonym of P. flavithorax (Stein, 1904), and for the latter a lectotype is designated. The neotype previously designated is considered invalid.

Discovery and redescription of type material of Nausithoe simplex (Kirkpatrick, 1890), comb. nov (Cnidaria: Scyphozoa: Coronatae: Nausithoidae) from the North Atlantic

With discovery and examination of type specimens in the Natural History Museum, London, UK, we reassign Stephanoscyphistoma simplex (Kirkpatrick, 1890) to the genus Nausithoe Kolliker, 1853, as Nausithoe simplex, comb. nov., and designate a lectotype for the species. Use of morphometric measurements is considered important in coronate systematics, but key features also include the unique whorl of internal cusps and the shape of these cusps. All previous records of N. simplex must be re-evaluated, taking into consideration the morphology of these internal cusps.

Catalogue of the type material of Neriidae (Diptera, Schizophora) in the collection of the Museum fur Naturkunde Berlin, Germany

The Diptera collection of the Natural History Museum Berlin holds one of the most important collections of Neriidae. In this paper, the type specimens (holotypes, lectotypes, paratypes, paralectotypes, syntypes) of this historical collection are listed. 28 species-group taxa are dealt with. A lectotype designation is made for the species Brachantichir purpusianus Enderlein, 1922 in order to fix the identity of the name. Holotypes are recognized by monotypy of the species Chaetomeristes bullatus Enderlein, 1922; Chaetomeristes peruanus Enderlein, 1922; Derocephalus angusticollis Enderlein, 1922; Glyphidops limbatus Enderlein, 1922; Longina abdominalis Wiedemann, 1830; Loxozus clavicornis Enderlein, 1922; Oncopsia mexicana Enderlein, 1922; Paranerius fibulatus Enderlein, 1922; Telostylinus dahli Enderlein, 1922; Telostylus latibrachium Enderlein, 1922; and Telostylinus luridus Enderlein, 1922. Syntypes are labelled and listed for Brachantichir robusta Enderlein, 1922; Nerius terebratus Enderlein, 1922; Odontoloxozus punctulatus Enderlein, 1922; Telostylinus apicalis Enderlein, 1922; Telostylinus obscuratus Enderlein, 1922; and Telostylinus ornatipennis Enderlein, 1922. The account concludes with geographic and taxonomic summaries; an appendix listing the abbreviations, localities, and collectors cited in the text; and a bibliography. ((c) 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)

The noctuid type material of John B. Smith (Lepidoptera) /

"Issued March 1982"--Verso of t.p.

Growth and characterisation of p-type delafossite transparent conducting thin films for heterojunction applications

In the present studies, various copper delafossite materials viz; CuAlO2, CuGaO2, CuFeO2 , CuGa1-xFexO2, CuYO2 and CuCaxY1-xO2 were synthesised by solid state reaction technique. These copper delafossite materials were grown in thin film form by rf magnetron sputtering technique. In general copper delafossites exhibit good optical transparency. The conductivity of the CuYO2 could be improved by Ca doping or by oxygen intercalation by annealing the film in oxygen atmosphere. It has so far been impossible to improve the p-type conductivity of CuGaO2 significantly by doping Mg or Ca on the Ga site. The ptype conductivity is presumed to be due to oxygen doping or Cu Vacancies [6]. Reports in literature show, oxygen intercalation or divalent ion doping on Ga site is not possible for CuGaO2 thin films to improve the p-type conductivity. Sintered powder and crystals of CuFeO2 have been reported as the materials having the highest p-type conductivity [14, 15] among the copper and silver delafossites. However the CuFeO2 films are found to be less transparent in the visible region compared to CuGaO2. Hence in the present work, the solid solution between the CuGaO2 and CuFeO2 was effected by solid state reaction, varying the Fe content. The CuGa1-xFexO2 with Fe content, x=0.5 shows an increase in conductivity by two orders, compared to CuGaO2 but the transparency is only about 50% in the visible region which is less than that of CuGaO2 The synthesis of α−AgGaO2 was carried out by two step process which involves the synthesis of β-AgGaO2 by ion exchange reaction followed by the hydrothermal conversion of the β-AgGaO2 into α-AgGaO2. The trace amount of Ag has been reduced substantially in the two step synthesis compared to the direct hydrothermal synthesis. Thin films of α-AgGaO2 were prepared on silicon and Al2O3 substrates by pulsed laser deposition. These studies indicate the possibility of using this material as p-type material in thin film form for transparent electronics. The room temperature conductivity of α-AgGaO2 was measured as 3.17 x 10-4 Scm-1and the optical band gap was estimated as 4.12 eV. A transparent p-n junction thin film diode on glass substrate was fabricated using p-type α-AgGaO2 and n-ZnO.AgCoO2 thin films with 50% transparency in the visible region were deposited on single crystalline Al2O3 and amorphous silica substrates by RF magnetron sputtering and p type conductivity of AgCoO2 was demonstrated by fabricating transparent p-n junction diode with AgCoO2 as p-side and ZnO: Al as n-side using sputtering. The junction thus obtained was found to be rectifying with a forward to reverse current of about 10 at an applied voltage of 3 V.The present study shows that silver delafossite thin films with p-type conductivity can be used for the fabrication of active devices for transparent electronics applications.

Thermoelectric performance of p-type TiCoSb half-Heusler compounds - Intrinsic phase separation and charge carrier concentration optimization as key to high efficiency

The world's rising demand of energy turns the development of sustainable and more efficient technologies for energy production and storage into an inevitable task. Thermoelectric generators, composed of pairs of n-type and p-type semiconducting materials, di¬rectly transform waste heat into useful electricity. The efficiency of a thermoelectric mate¬rial depends on its electronic and lattice properties, summarized in its figure of merit ZT. Desirable are high electrical conductivity and Seebeck coefficients, and low thermal con¬ductivity. Half-Heusler materials are very promising candidates for thermoelectric applications in the medium¬ temperature range such as in industrial and automotive waste heat recovery. The advantage of Heusler compounds are excellent electronic properties and high thermal and mechanical stability, as well as their low toxicity and elemental abundance. Thus, the main obstacle to further enhance their thermoelectric performance is their relatively high thermal conductivity.rn rnIn this work, the thermoelectric properties of the p-type material (Ti/Zr/Hf)CoSb1-xSnx were optimized in a multistep process. The concept of an intrinsic phase separation has recently become a focus of research in the compatible n-type (Ti/Zr/Hf)NiSn system to achieve low thermal conductivities and boost the TE performance. This concept is successfully transferred to the TiCoSb system. The phase separation approach can form a significant alternative to the previous nanostructuring approach via ball milling and hot pressing, saving pro¬cessing time, energy consumption and increasing the thermoelectric efficiency. A fundamental concept to tune the performance of thermoelectric materials is charge carrier concentration optimization. The optimum carrier concentration is reached with a substitution level for Sn of x = 0.15, enhancing the ZT about 40% compared to previous state-of-the-art samples with x = 0.2. The TE performance can be enhanced further by a fine-tuning of the Ti-to-Hf ratio. A correlation of the microstructure and the thermoelectric properties is observed and a record figure of merit ZT = 1.2 at 710°C was reached with the composition Ti0.25Hf0.75CoSb0.85Sn0.15.rnTowards application, the long term stability of the material under actual conditions of operation are an important issue. The impact of such a heat treatment on the structural and thermoelectric properties is investigated. Particularly, the best and most reliable performance is achieved in Ti0.5Hf0.5CoSb0.85Sn0.15, which reached a maximum ZT of 1.1 at 700°C. The intrinsic phase separation and resulting microstructure is stable even after 500 heating and cooling cycles.

Redescription of Hyalella Azteca from Its Type Locality, Vera Cruz, Mexico (Amphipoda : Hyalellidae)

Hyalella azteca is a species complex distributed in North, Central, and northern South America. The identity of the species has always been a problem, especially because the original description by Saussure (1858) from a "cistern" in Vera Cruz, Mexico, is poor, and the figures are not clear. Since then, mention of the type material or specimens from the type locality has not been made by investigators using the name H. azteca. Ecological and genetic information available today suggests that there are several species in the complex commonly referred to as H. azteca. The subtle morphological differences among the populations have made the problem of defining these species very complicated. To aid in this process, we present here the morphological description of H. azteca based on the syntype series established by Saussure and deposited in the Museum d'Histoire Naturelle, Ville de Geneve, Switzerland.

Should reproductively isolated populations of Lutzomyia longipalpis sensu lato receive taxonomically valid names?

A group of 18 research workers involved in different aspects of the biology of Lutzomyia longipalpis discussed whether or not it is important to give taxonomically valid names to populations that have been defined by biological, biochemical and molecular methods to be reproductively isolated. The type material of this medically important species has been lost and because of this it was recommended that a colony should be established from insects captured in the region of the type area and that their description should serve as the basis for future descriptions. It was pointed out that there is a lack of uniformity in the naming of closely related American sand flies and that some of the differences between populations of Lu. longipalpis are greater than those between accepted species. The majority of the participants agreed that the populations that have been defined in the literature as sibling species should be named.

A catalogue of types of Conopoidea, Diopsoidea, Nerioidea and Tephritoidea (Diptera, Schizophora) in the collection of the Museu de Zoologia da Universidade de São Paulo

A catalogue is provided with the type material of four superfamilies of "Acalyptrate" (Conopoidea, Diopsoidea, Nerioidea and Tephritoidea) held in the collection of the Museu de Zoologia da Universidade de São Paulo (MZUSP), São Paulo, Brazil. Concerning the taxa dealt with herein, the Diptera collection of MZUSP held 77 holotypes, 4 "allotypes" and 194 paratypes. In this paper, information about data labels, preservation and missing structures of the type specimens is given.

Redescription of Hiatella meridionalis d'Orbigny, 1846 (Mollusca, Bivalvia, Hiatellidae) from Argentina

The redescription of Hiatella meridionalis (d’Orbigny, 1846) is provided as first attempt to improve the systematics of the genus in the regions of Atlantic and western Pacific. This reanalysis is based on specimens collected in the vicinity of the type localities and is based on detailed morphology of samples that some researches consider a single, wide ranging species. From the morphological characters, the more interesting are: a high quantity of papillae at incurrent siphon; the retractor muscles of siphon divided in two bundles; the small size of the palps; the muscular ring in the stomach; and the zigzag fashion of the short intestinal loops. These characters distinguish the species from the other hiatellids so far examined. Type material of the species was examined, by first time illustrated, and the lectotype is designated.

Systematic review and cladistic analysis of the genus Eusarcus Perty 1833 (Arachnida, Opiliones, Gonyleptidae)

Eusarcus Perty 1833 is one of the oldest described genera of Pachylinae, comprising 36 species distributed from northeastern to southern Brazil (including the central west region), northeastern Argentina, eastern Paraguay and Uruguay. The genus is reviewed and a new classification is proposed based on a cladistic analysis. A cladistic analysis was performed with the 34 valid species of Eusarcus and 11 species belonging to certain Gonyleptidae subfamilies. The data matrix has 67 characters: 14 from dorsal scutum and pedipalp, 38 from male legs and 15 from male genitalia. Two equally parsimonious trees were found (L=319; C. I.=0.26, R. I.=0.61). Pygophalangodus gemignanii uruguayensis Ringuelet 1955a and Pygophalangodus gemignanii gemignanii Mello-Leitao 1931b are here elevated to the category of species, and the following new combinations are proposed: E. catharinensis (Mello-Leitao 1927); E. berlae (Mello-Leitao 1932); E. gemignanii (Mello-Leitao 1931b); E. signatus(Roewer 1949); E. sooretamae (Soares & Soares 1946a); E. uruguayensis (Ringuelet 1955a). The following generic synonymies are proposed: Eusarcus Perty 1833 (type species E. armatus Perty 1833) = Metagraphinotus Mello-Leitao 1927 (type species M. catharinensis Mello-Leitao 1927), Pareusarcus Roewer 1929 (type species P. corniculatus Roewer 1929), Pygophalangodus Mello-Leitao 1931b (type species P. gemignanii-gemignanii Mello-Leitao 1931b) and Antetriceras Roewer 1949 (type species A. signatus Roewer 1949). The following specific synonymies are proposed: Eusarcus hastatus Sorensen 1884 = Pucrolioides argentina Roewer 1913, E. guimaraensi H. Soares 1945, Jacarepaguana pectinifemur Piza 1943, Canestrinia canalsi Mello-Leitao 1931a, and E. maquinensis H. Soares 1966b; E. armatus Perty 1833 = E. curvispinosus Mello-Leitao 1923b, and Enantiocentron montis Mello-Leitao 1936; Eusarcus catharinensis (Mello-Leitao 1927) = E. antoninae Mello-Leitao 1936, E. perpusillus Mello-Leitao 1945, E. tripos Mello-Leitao 1940, and Metagraphinotus trochanterspinosus Soares & Soares 1947b; E. nigrimaculatus Mello-Leitao 1924 = Pareusarcus centromelos Mello-Leitao 1935a, E. furcatus Roewer 1929, Orguesia armata Roewer 1913, and Pareusarcus corniculatus Roewer 1929; E. oxyacanthus Kollar in Koch 1839a = Enantiocentron doriphorus Mello-Leitao 1932, and E. spinimanu Mello-Leitao 1932; E. pusillus Sorensen 1884 = E. vervloeti B. Soares 1944c; E. berlae Mello-Leitao 1932 = Metagraphinotus arlei Mello-Leitao 1935a. Metapucrolia armata (Sorensen 1895) is revalidated, transferred to Eusarcus and considered as a species inquirenda. A new name, Eusarcus metapucrolia is proposed for this species to avoid homonymy with the type species of Eusarcus, E. armatus Perty 1833. Eusarcus aberrans Mello-Leitao 1939a is considered as a species inquirenda. The male of E. teresincola Soares & Soares 1946a is described. Female of the following species are described: E. bifidus Roewer 1929; E. dubius B. Soares 1943b; E. insperatus B. Soares 1944a; E. schubarti Soares & Soares 1946a; E. sooretamae (Soares & Soares 1946a). The following new species are described from Brazil: E. acrophthalmus (type locality: Bahia, Ilheus, Parataquice); E. alpinus (Rio de Janeiro, Santa Maria Madalena, Parque Estadual do Desengano); E. caparaoensis (Minas Gerais, Alto Caparao, Parque Nacional do Caparao); E. cavernicola (Goias, Sao Domingos, Parque Estadual de Terra Ronca, Lapa da Angelica); E. didactylus (Rio de Janeiro, Teresopolis, Parque Nacional Serra dos Orgaos); E. garibaldiae (Santa Catarina, Itajai); E. geometricus (Rio de Janeiro, Teresopolis, Parque Nacional Serra dos Orgaos); E. manero (Rio de Janeiro, Marica, Itaipuacu); E. matogrossensis (Mato Grosso, Chapada dos Guimaraes); E. mirabilis (Minas Gerais, Marlieria, Parque Estadual Rio Doce); E. sergipanus (Sergipe, Itabaiana, Parque Nacional de Itabaiana) and E. tripectinatus (Minas Gerais, Rio Preto). The holotype of E. curvispinosus is proposed as the neotype of E. armatus Perty 1833, the type material of which has been lost. Lectotypes for the following species were designated: E. aduncus; E. hastatus; E. oxyacanthus.

A new species of land planarian of Gigantea Ogren and Kawakatsu, 1990 (Platyhelminthes, Tricladida, Terricola) from Colombia, with taxonomic remarks on the genus

A new species of land planarian from Colombia, Gigantea maupoi sp. nov., is described herein. The penis papilla of the new species is provided with numerous accessory genital organs, or mgo. These mgo are of a unique morphology, consisting of a very strong barrel-shaped circular muscle coat and an underlying longitudinal one, both derived from the subepithelial musculature of the penis papilla. The central mass of each mgo contains secretions and 8-15 canalicula that open to the male atrium on the central region of the organ. Differences in structures constituting the mgo and details of the muscular systems and of the reproductive organs among the 11 Gigantea species from literature and from type material of G. bistriata (Hyman, 1962), G. chiriquii (Hyman, 1962), and G. sandersoni (Prudhoe, 1949) reexamined here show that the genus is heterogeneous.