The Transformation Problem : an Aleternative Solution with an Identical Aggregate Profit Rate in the Labor value and the Monetary Space.

The aim of this paper is to demonstrate that, even if Marx's solution to the transformation problem can be modified, his basic conclusions remain valid. the proposed alternative solution which is presented hare is based on the constraint of a common general profit rate in both spaces and a money wage level which will be determined simultaneously with prices.

The Transformation Problem : an Aleternative Solution with an Identical Aggregate Profit Rate in the Labor value and the Monetary Space.

The aim of this paper is to demonstrate that, even if Marx's solution to the transformation problem can be modified, his basic conclusions remain valid. the proposed alternative solution which is presented hare is based on the constraint of a common general profit rate in both spaces and a money wage level which will be determined simultaneously with prices.

The Wage Rate and the Profit Rate in the Price of Production Equation: a New Solution to an Old Problem

The aim of this paper is to demonstrate that, even if Marx's solution to the transformation problem can be modified, his basic concusions remain valid.

Value and prices in Russian economic thought (1890-1920)

The subject "Value and prices in Russian economic thought (1890--1920)" should evoke several names and debates in the reader's mind. For a long time, Western scholars have been aware that the Russian economists Tugan-Baranovsky and Bortkiewicz were active participants to the Marxian transformation problem, that the mathematical models of Dmitriev prefigured forthcoming neoricardian based models, and that many Russian economists were either supporting the Marxian labour theory of value or being revisionists. Moreover, these ideas were preparing the ground for Soviet planning. Russian scholars additionally knew that this period was the time of introduction of marginalism in Russia, and that, during this period, economists were active in thinking the relation of ethics with economic theory. All these issues are well covered in the existing literature. But there is a big gap that this dissertation intends to fill. The existing literature handles these pieces separately, although they are part of a single, more general, history. All these issues (the labour theory of value, marginalism, the Marxian transformation problem, planning, ethics, mathematical economics) were part of what this dissertation calls here "The Russian synthesis". The Russian synthesis (in the singular) designates here all the attempts at synthesis between classical political economy and marginalism, between labour theory of value and marginal utility, and between value and prices that occurred in Russian economic thought between 1890 and 1920, and that embraces the whole set of issues evoked above. This dissertation has the ambition of being the first comprehensive history of that Russian synthesis. In this, this contribution is unique. It has always surprised the author of the present dissertation that such a book has not yet been written. Several good reasons, both in terms of scarce availability of sources and of ideological restrictions, may accounted for a reasonable delay of several decades. But it is now urgent to remedy the situation before the protagonists of the Russian synthesis are definitely classified under the wrong labels in the pantheon of economic thought. To accomplish this task, it has seldom be sufficient to gather together the various existing studies on aspects of this story. It as been necessary to return to the primary sources in the Russian language. The most important part of the primary literature has never been translated, and in the last years only some of them have been republished in Russian. Therefore, most translations from the Russian have been made by the author of the present dissertation. The secondary literature has been surveyed in the languages that are familiar (Russian, English and French) or almost familiar (German) to the present author, and which are hopefully the most pertinent to the present investigation. Besides, and in order to increase the acquaintance with the text, which was the objective of all this, some archival sources were used. The analysis consists of careful chronological studies of the authors' writings and their evolution in their historical and intellectual context. As a consequence, the dissertation brings new authors to the foreground - Shaposhnikov and Yurovsky - who were traditionally confined to the substitutes' bench, because they only superficially touched the domains quoted above. In the Russian synthesis however, they played an important part of the story. As a side effect, some authors that used to play in the foreground - Dmitriev and Bortkiewicz - are relegated to the background, but are not forgotten. Besides, the dissertation refreshes the views on authors already known, such as Ziber and, especially, Tugan-Baranovsky. The ultimate objective of this dissertation is to change the opinion that one could have on "value and prices in Russian economic thought", by setting the Russian synthesis at the centre of the debates.

As fases históricas do debate sobre a transformação dos valores em preços de produção

The historical phases of the debate on the transformation of values into production prices. Even though the transformation problem in general does not have a widen accepted solution, it is possible to recognize scientific progress when the historical phases of the debate are put side by side in order to complement each other. Therefore, the debate originated from the challenge of the conciliation of the law of value with an equal average rate of profit, though sometimes said to be unfruitful by economists, shows evolution in the long run because it forces non-marxist economic schools to confront concretely the quality side of value in theory and to develop abstract models of planned economy in practice.

Advances in the Simultaneous Multiple Surface optical design method for imaging and non-imaging applications

Classical imaging optics has been developed over centuries in many areas, such as its paraxial imaging theory and practical design methods like multi-parametric optimization techniques. Although these imaging optical design methods can provide elegant solutions to many traditional optical problems, there are more and more new design problems, like solar concentrator, illumination system, ultra-compact camera, etc., that require maximum energy transfer efficiency, or ultra-compact optical structure. These problems do not have simple solutions from classical imaging design methods, because not only paraxial rays, but also non-paraxial rays should be well considered in the design process. Non-imaging optics is a newly developed optical discipline, which does not aim to form images, but to maximize energy transfer efficiency. One important concept developed from non-imaging optics is the “edge-ray principle”, which states that the energy flow contained in a bundle of rays will be transferred to the target, if all its edge rays are transferred to the target. Based on that concept, many CPC solar concentrators have been developed with efficiency close to the thermodynamic limit. When more than one bundle of edge-rays needs to be considered in the design, one way to obtain solutions is to use SMS method. SMS stands for Simultaneous Multiple Surface, which means several optical surfaces are constructed simultaneously. The SMS method was developed as a design method in Non-imaging optics during the 90s. The method can be considered as an extension to the Cartesian Oval calculation. In the traditional Cartesian Oval calculation, one optical surface is built to transform an input wave-front to an out-put wave-front. The SMS method however, is dedicated to solve more than 1 wave-fronts transformation problem. In the beginning, only 2 input wave-fronts and 2 output wave-fronts transformation problem was considered in the SMS design process for rotational optical systems or free-form optical systems. Usually “SMS 2D” method stands for the SMS procedure developed for rotational optical system, and “SMS 3D” method for the procedure for free-form optical system. Although the SMS method was originally employed in non-imaging optical system designs, it has been found during this thesis that with the improved capability to design more surfaces and control more input and output wave-fronts, the SMS method can also be applied to imaging system designs and possesses great advantage over traditional design methods. In this thesis, one of the main goals to achieve is to further develop the existing SMS-2D method to design with more surfaces and improve the stability of the SMS-2D and SMS-3D algorithms, so that further optimization process can be combined with SMS algorithms. The benefits of SMS plus optimization strategy over traditional optimization strategy will be explained in details for both rotational and free-form imaging optical system designs. Another main goal is to develop novel design concepts and methods suitable for challenging non-imaging applications, e.g. solar concentrator and solar tracker. This thesis comprises 9 chapters and can be grouped into two parts: the first part (chapter 2-5) contains research works in the imaging field, and the second part (chapter 6-8) contains works in the non-imaging field. In the first chapter, an introduction to basic imaging and non-imaging design concepts and theories is given. Chapter 2 presents a basic SMS-2D imaging design procedure using meridian rays. In this chapter, we will set the imaging design problem from the SMS point of view, and try to solve the problem numerically. The stability of this SMS-2D design procedure will also be discussed. The design concepts and procedures developed in this chapter lay the path for further improvement. Chapter 3 presents two improved SMS 3 surfaces’ design procedures using meridian rays (SMS-3M) and skew rays (SMS-1M2S) respectively. The major improvement has been made to the central segments selections, so that the whole SMS procedures become more stable compared to procedures described in Chapter 2. Since these two algorithms represent two types of phase space sampling, their image forming capabilities are compared in a simple objective design. Chapter 4 deals with an ultra-compact SWIR camera design with the SMS-3M method. The difficulties in this wide band camera design is how to maintain high image quality meanwhile reduce the overall system length. This interesting camera design provides a playground for the classical design method and SMS design methods. We will show designs and optical performance from both classical design method and the SMS design method. Tolerance study is also given as the end of the chapter. Chapter 5 develops a two-stage SMS-3D based optimization strategy for a 2 freeform mirrors imaging system. In the first optimization phase, the SMS-3D method is integrated into the optimization process to construct the two mirrors in an accurate way, drastically reducing the unknown parameters to only few system configuration parameters. In the second optimization phase, previous optimized mirrors are parameterized into Qbfs type polynomials and set up in code V. Code V optimization results demonstrates the effectiveness of this design strategy in this 2-mirror system design. Chapter 6 shows an etendue-squeezing condenser optics, which were prepared for the 2010 IODC illumination contest. This interesting design employs many non-imaging techniques such as the SMS method, etendue-squeezing tessellation, and groove surface design. This device has theoretical efficiency limit as high as 91.9%. Chapter 7 presents a freeform mirror-type solar concentrator with uniform irradiance on the solar cell. Traditional parabolic mirror concentrator has many drawbacks like hot-pot irradiance on the center of the cell, insufficient use of active cell area due to its rotational irradiance pattern and small acceptance angle. In order to conquer these limitations, a novel irradiance homogenization concept is developed, which lead to a free-form mirror design. Simulation results show that the free-form mirror reflector has rectangular irradiance pattern, uniform irradiance distribution and large acceptance angle, which confirm the viability of the design concept. Chapter 8 presents a novel beam-steering array optics design strategy. The goal of the design is to track large angle parallel rays by only moving optical arrays laterally, and convert it to small angle parallel output rays. The design concept is developed as an extended SMS method. Potential applications of this beam-steering device are: skylights to provide steerable natural illumination, building integrated CPV systems, and steerable LED illumination. Conclusion and future lines of work are given in Chapter 9. Resumen La óptica de formación de imagen clásica se ha ido desarrollando durante siglos, dando lugar tanto a la teoría de óptica paraxial y los métodos de diseño prácticos como a técnicas de optimización multiparamétricas. Aunque estos métodos de diseño óptico para formación de imagen puede aportar soluciones elegantes a muchos problemas convencionales, siguen apareciendo nuevos problemas de diseño óptico, concentradores solares, sistemas de iluminación, cámaras ultracompactas, etc. que requieren máxima transferencia de energía o dimensiones ultracompactas. Este tipo de problemas no se pueden resolver fácilmente con métodos clásicos de diseño porque durante el proceso de diseño no solamente se deben considerar los rayos paraxiales sino también los rayos no paraxiales. La óptica anidólica o no formadora de imagen es una disciplina que ha evolucionado en gran medida recientemente. Su objetivo no es formar imagen, es maximazar la eficiencia de transferencia de energía. Un concepto importante de la óptica anidólica son los “rayos marginales”, que se pueden utilizar para el diseño de sistemas ya que si todos los rayos marginales llegan a nuestra área del receptor, todos los rayos interiores también llegarán al receptor. Haciendo uso de este principio, se han diseñado muchos concentradores solares que funcionan cerca del límite teórico que marca la termodinámica. Cuando consideramos más de un haz de rayos marginales en nuestro diseño, una posible solución es usar el método SMS (Simultaneous Multiple Surface), el cuál diseña simultáneamente varias superficies ópticas. El SMS nació como un método de diseño para óptica anidólica durante los años 90. El método puede ser considerado como una extensión del cálculo del óvalo cartesiano. En el método del óvalo cartesiano convencional, se calcula una superficie para transformar un frente de onda entrante a otro frente de onda saliente. El método SMS permite transformar varios frentes de onda de entrada en frentes de onda de salida. Inicialmente, sólo era posible transformar dos frentes de onda con dos superficies con simetría de rotación y sin simetría de rotación, pero esta limitación ha sido superada recientemente. Nos referimos a “SMS 2D” como el método orientado a construir superficies con simetría de rotación y llamamos “SMS 3D” al método para construir superficies sin simetría de rotación o free-form. Aunque el método originalmente fue aplicado en el diseño de sistemas anidólicos, se ha observado que gracias a su capacidad para diseñar más superficies y controlar más frentes de onda de entrada y de salida, el SMS también es posible aplicarlo a sistemas de formación de imagen proporcionando una gran ventaja sobre los métodos de diseño tradicionales. Uno de los principales objetivos de la presente tesis es extender el método SMS-2D para permitir el diseño de sistemas con mayor número de superficies y mejorar la estabilidad de los algoritmos del SMS-2D y SMS-3D, haciendo posible combinar la optimización con los algoritmos. Los beneficios de combinar SMS y optimización comparado con el proceso de optimización tradicional se explican en detalle para sistemas con simetría de rotación y sin simetría de rotación. Otro objetivo importante de la tesis es el desarrollo de nuevos conceptos de diseño y nuevos métodos en el área de la concentración solar fotovoltaica. La tesis está estructurada en 9 capítulos que están agrupados en dos partes: la primera de ellas (capítulos 2-5) se centra en la óptica formadora de imagen mientras que en la segunda parte (capítulos 6-8) se presenta el trabajo del área de la óptica anidólica. El primer capítulo consta de una breve introducción de los conceptos básicos de la óptica anidólica y la óptica en formación de imagen. El capítulo 2 describe un proceso de diseño SMS-2D sencillo basado en los rayos meridianos. En este capítulo se presenta el problema de diseñar un sistema formador de imagen desde el punto de vista del SMS y se intenta obtener una solución de manera numérica. La estabilidad de este proceso se analiza con detalle. Los conceptos de diseño y los algoritmos desarrollados en este capítulo sientan la base sobre la cual se realizarán mejoras. El capítulo 3 presenta dos procedimientos para el diseño de un sistema con 3 superficies SMS, el primero basado en rayos meridianos (SMS-3M) y el segundo basado en rayos oblicuos (SMS-1M2S). La mejora más destacable recae en la selección de los segmentos centrales, que hacen más estable todo el proceso de diseño comparado con el presentado en el capítulo 2. Estos dos algoritmos representan dos tipos de muestreo del espacio de fases, su capacidad para formar imagen se compara diseñando un objetivo simple con cada uno de ellos. En el capítulo 4 se presenta un diseño ultra-compacto de una cámara SWIR diseñada usando el método SMS-3M. La dificultad del diseño de esta cámara de espectro ancho radica en mantener una alta calidad de imagen y al mismo tiempo reducir drásticamente sus dimensiones. Esta cámara es muy interesante para comparar el método de diseño clásico y el método de SMS. En este capítulo se presentan ambos diseños y se analizan sus características ópticas. En el capítulo 5 se describe la estrategia de optimización basada en el método SMS-3D. El método SMS-3D calcula las superficies ópticas de manera precisa, dejando sólo unos pocos parámetros libres para decidir la configuración del sistema. Modificando el valor de estos parámetros se genera cada vez mediante SMS-3D un sistema completo diferente. La optimización se lleva a cabo variando los mencionados parámetros y analizando el sistema generado. Los resultados muestran que esta estrategia de diseño es muy eficaz y eficiente para un sistema formado por dos espejos. En el capítulo 6 se describe un sistema de compresión de la Etendue, que fue presentado en el concurso de iluminación del IODC en 2010. Este interesante diseño hace uso de técnicas propias de la óptica anidólica, como el método SMS, el teselado de las lentes y el diseño mediante grooves. Este dispositivo tiene un límite teórica en la eficiencia del 91.9%. El capítulo 7 presenta un concentrador solar basado en un espejo free-form con irradiancia uniforme sobre la célula. Los concentradores parabólicos tienen numerosas desventajas como los puntos calientes en la zona central de la célula, uso no eficiente del área de la célula al ser ésta cuadrada y además tienen ángulos de aceptancia de reducido. Para poder superar estas limitaciones se propone un novedoso concepto de homogeneización de la irrandancia que se materializa en un diseño con espejo free-form. El análisis mediante simulación demuestra que la irradiancia es homogénea en una región rectangular y con mayor ángulo de aceptancia, lo que confirma la viabilidad del concepto de diseño. En el capítulo 8 se presenta un novedoso concepto para el diseño de sistemas afocales dinámicos. El objetivo del diseño es realizar un sistema cuyo haz de rayos de entrada pueda llegar con ángulos entre ±45º mientras que el haz de rayos a la salida sea siempre perpendicular al sistema, variando únicamente la posición de los elementos ópticos lateralmente. Las aplicaciones potenciales de este dispositivo son varias: tragaluces que proporcionan iluminación natural, sistemas de concentración fotovoltaica integrados en los edificios o iluminación direccionable con LEDs. Finalmente, el último capítulo contiene las conclusiones y las líneas de investigación futura.

On OBDD Transformations Representing Finite State Automata

We present OBDD transformation problem representing finite labeled transition systems corresponding to some congruence relation. Transformations are oriented toward obtaining the OBDD of a minimized transition system for this congruence relation.

Legal and political regulation of higher education in Portugal: an evolutionary perspective on the current policy issues and the problem of order

The higher education system in Europe is currently under stress and the debates over its reform and future are gaining momentum. Now that, for most countries, we are in a time for change, in the overall society and the whole education system, the legal and political dimensions have gained prominence, which has not been followed by a more integrative approach of the problem of order, its reform and the issue of regulation, beyond the typical static and classical cost-benefit analyses. The two classical approaches for studying (and for designing the policy measures of) the problem of the reform of the higher education system - the cost-benefit analysis and the legal scholarship description - have to be integrated. This is the argument of our paper that the very integration of economic and legal approaches, what Warren Samuels called the legal-economic nexus, is meaningful and necessary, especially if we want to address the problem of order (as formulated by Joseph Spengler) and the overall regulation of the system. On the one hand, and without neglecting the interest and insights gained from the cost-benefit analysis, or other approaches of value for money assessment, we will focus our study on the legal, social and political aspects of the regulation of the higher education system and its reform in Portugal. On the other hand, the economic and financial problems have to be taken into account, but in a more inclusive way with regard to the indirect and other socio-economic costs not contemplated in traditional or standard assessments of policies for the tertiary education sector. In the first section of the paper, we will discuss the theoretical and conceptual underpinning of our analysis, focusing on the evolutionary approach, the role of critical institutions, the legal-economic nexus and the problem of order. All these elements are related to the institutional tradition, from Veblen and Commons to Spengler and Samuels. The second section states the problem of regulation in the higher education system and the issue of policy formulation for tackling the problem. The current situation is clearly one of crisis with the expansion of the cohorts of young students coming to an end and the recurrent scandals in private institutions. In the last decade, after a protracted period of extension or expansion of the system, i. e., the continuous growth of students, universities and other institutions are competing harder to gain students and have seen their financial situation at risk. It seems that we are entering a period of radical uncertainty, higher competition and a new configuration that is slowly building up is the growth in intensity, which means upgrading the quality of the higher learning and getting more involvement in vocational training and life-long learning. With this change, and along with other deep ones in the Portuguese society and economy, the current regulation has shown signs of maladjustment. The third section consists of our conclusions on the current issue of regulation and policy challenge. First, we underline the importance of an evolutionary approach to a process of change that is essentially dynamic. A special attention will be given to the issues related to an evolutionary construe of policy analysis and formulation. Second, the integration of law and economics, through the notion of legal economic nexus, allows us to better define the issues of regulation and the concrete problems that the universities are facing. One aspect is the instability of the political measures regarding the public administration and on which the higher education system depends financially, legally and institutionally, to say the least. A corollary is the lack of clear strategy in the policy reforms. Third, our research criticizes several studies, such as the one made by the OECD in late 2006 for the Ministry of Science, Technology and Higher Education, for being too static and neglecting fundamental aspects of regulation such as the logic of actors, groups and organizations who are major players in the system. Finally, simply changing the legal rules will not necessary per se change the behaviors that the authorities want to change. By this, we mean that it is not only remiss of the policy maker to ignore some of the critical issues of regulation, namely the continuous non-respect by academic management and administrative bodies of universities of the legal rules that were once promulgated. Changing the rules does not change the problem, especially without the necessary debates form the different relevant quarters that make up the higher education system. The issues of social interaction remain as intact. Our treatment of the matter will be organized in the following way. In the first section, the theoretical principles are developed in order to be able to study more adequately the higher education transformation with a modest evolutionary theory and a legal and economic nexus of the interactions of the system and the policy challenges. After describing, in the second section, the recent evolution and current working of the higher education in Portugal, we will analyze the legal framework and the current regulatory practices and problems in light of the theoretical framework adopted. We will end with some conclusions on the current problems of regulation and the policy measures that are discusses in recent years.

Alteration and Contamination of Archaeological Ceramics: the Perturbation Problem

Alteration and contamination processes modify the chemical composition of ceramic artefacts. This is not restricted solely to the affected elements, but also affects general concentrations. This is due to the compositional nature of chemical data, enclosed by the restriction of unit sum. Since it is impossible to know prior to data treatment whether the original compositions have been changed by such processes, the methodological approach used in provenance studies must be robust enough to handle materials that might have been altered or contaminated. The ability of the logratio transformation proposed by Aitchison to handle compositional data is studied and compared with that of present data treatments. The logaratio transformation appears to offer the most robust approach

Challenges in managing large-scale agile software development transformation

Adapting and scaling up agile concepts, which are characterized by iterative, self-directed, customer value focused methods, may not be a simple endeavor. This thesis concentrates on studying challenges in a large-scale agile software development transformation in order to enhance understanding and bring insight into the underlying factors for such emerging challenges. This topic is approached through understanding the concepts of agility and different methods compared to traditional plan-driven processes, complex adaptive theory and the impact of organizational culture on agile transformational efforts. The empirical part was conducted by a qualitative case study approach. The internationally operating software development case organization had a year of experience of an agile transformation effort during it had also undergone organizational realignment efforts. The primary data collection was conducted through semi-structured interviews supported by participatory observation. As a result the identified challenges were categorized under four broad themes: organizational, management, team dynamics and process related. The identified challenges indicate that agility is a multifaceted concept. Agile practices may bring visibility in issues of which many are embedded in the organizational culture or in the management style. Viewing software development as a complex adaptive system could facilitate understanding of the underpinning philosophy and eventually solving the issues: interactions are more important than processes and solving a complex problem, such a novel software development, requires constant feedback and adaptation to changing requirements. Furthermore, an agile implementation seems to be unique in nature, and agents engaged in the interaction are the pivotal part of the success of achieving agility. In case agility is not a strategic choice for whole organization, it seems additional issues may arise due to different ways of working in different parts of an organization. Lastly, detailed suggestions to mitigate the challenges of the case organization are provided.

A distributed, cloud-ready, digital content processing and transformation platform and a specific use case

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Paradigms and prisons: a narrative of translation and transformation : my hero's journey from "at-risk" youth to teacher/learner in a jail setting /

All life is suffering. Life is the pursuit ofhappiness. These are two foundational Buddhist dictums that, in their simplicity, I have entirely misunderstood regarding their depth, misreading them as contradictory. Indeed, my superficial interpretations led me to Thoreau's life ofquiet desperation and deep depression. We come to know and bring understanding to our lives by storying them. My own Hero's Journey, the path from my egoic selftoward the universal Self, can be understood as the resultant translations and transformations. Inevitably each of us is involved in such a story, though most are unaware of the stages along our own Hero's journey. ' Narrative honours writing as a means of knowing. The contemplative reflection allows insight into our imprisoning paradigms, beliefs, behaviours, and blind spots. My research revisits and explores nodal experiences along my Hero's Journey through 4 categories: self, society, soil, and Self. While the value of this process of narrative inquiry lay in its ability to come to know and understand one's self, perhaps its greater value is of a more universal nature. My inquiry, while adding to the body of academic educational narrative literature, may also illuminate a path to educators, students, and all interested, encouraging a response to the call of their own Hero's journey. I am a teacher/learner in a jail setting, working with youth between the ages of 12 and 18 who have committed crimes such as armed robbery, assault, rape, and murder. As this thesis follows my continual development from egoic self/teacher/learner to universal Self/Teacher/Learner, it also enables me to both consciously and unconsciously open the ways in which I expand my care, compassion, and love to work with at-risk youth.

An exploration of transformation theory and the western tradition: a critical evaluation of a graduate studies class

This qualitative study is an exploration of transformation theory, the Western tradition, and a critical evaluation of a graduate studies class at a university. It is an exploration of assumptions that are embedded in experience, that influence the experience and provide meaning about the experience. An attempt has been made to identify assumptions that are embedded in Western experience and connect them with assumptions that shape the graduate class experience. The focus is on assumptions that facilitate and impede large group discussions. Jungian psychology of personality type and archetype and developmental psychology is used to analyze the group experience. The pragmatic problem solving model, developed by Knoop, is used to guide thinking about the Western tradition. It is used to guide the analysis, synthesis and writing of the experience of the graduate studies class members. A search through Western history, philosophy. and science revealed assumptions about the nature of truth, reality, and the self. Assumptions embedded in Western thinking about the subject-object relationship, unity and diversity are made explicit. An attempt is made to identify Western tradition assumptions underlying transformation theory. The critical evaluation of the graduate studies class experience focuses upon issues associated with group process, self-directed learning, the educator-learner transaction and the definition of adult education. The advantages of making implicit assumptions explicit is explored.

Les cadres intermédiaires et l’information : modélisation des comportements informationnels de cadres intermédiaires d’une municipalité en transformation

Un atout majeur des organisations consiste en leur capacité à créer et exploiter l’information et les connaissances, capacité déterminée entre autres par les comportements informationnels. Chargés de décisions stratégiques, tactiques et opérationnelles, les cadres intermédiaires sont au cœur du processus de création des connaissances, et leurs comportements informationnels doivent être soutenus par des systèmes d’information. Toutefois, leurs comportements informationnels sont peu documentés. La présente recherche porte sur la modélisation des comportements informationnels de cadres intermédiaires d’une organisation municipale. Plus spécifiquement, elle examine comment ces cadres répondent à leurs besoins d’information courante dans le contexte de leurs activités de gestion, c’est-à-dire dans leur environnement d’utilisation d’information. L’étude répond aux questions de recherche suivantes : (1) Quelles sont les situations problématiques auxquelles font face les cadres intermédiaires municipaux ? (2) Quels sont les besoins informationnels exprimés par les cadres intermédiaires municipaux lors de situations problématiques ? (3) Quelles sont les sources d’information qui soutiennent les comportements informationnels des cadres intermédiaires municipaux ? Cette recherche descriptive s’inscrit dans une approche qualitative. Les 21 cadres intermédiaires ayant participé à l’étude proviennent de deux arrondissements d’une municipalité québécoise fusionnée en 2002. Les modes de collecte de données sont l’entrevue en profondeur en personne et l’observation directe auprès de ces cadres, et la collecte de documentation pertinente. L’incident critique est utilisé comme technique de collecte de données et comme unité d’analyse. Les données recueillies font l’objet d’une analyse de contenu qualitative basée sur la théorisation ancrée. Les résultats indiquent que les rôles de gestion proposés dans les écrits pour les cadres supérieurs s’appliquent aussi aux cadres intermédiaires, bien que le rôle conseil ressorte comme étant particulier à ces derniers. Ceux-ci ont des responsabilités de gestion aux trois niveaux d’intervention opérationnel, tactique et stratégique, bien qu’ils œuvrent davantage au plan tactique. Les situations problématiques dont ils sont chargés s’inscrivent dans l’environnement d’utilisation d’information constitué des composantes suivantes : leurs rôles et responsabilités de gestion et le contexte organisationnel propre à une municipalité en transformation. Les cadres intermédiaires ont eu à traiter davantage de situations nouvelles que récurrentes, caractérisées par des sujets portant principalement sur les ressources matérielles et immobilières ou sur des aspects d’intérêt juridique, réglementaire et normatif. Ils ont surtout manifesté des besoins pour de l’information de nature processuelle et contextuelle. Pour y répondre, ils ont consulté davantage de sources verbales que documentaires, même si le nombre de ces dernières reste élevé, et ont préféré utiliser des sources d’information internes. Au plan théorique, le modèle de comportement informationnel proposé pour les cadres intermédiaires municipaux enrichit les principales composantes du modèle général d’utilisation de l’information (Choo, 1998) et du modèle d’environnement d’utilisation d’information (Taylor, 1986, 1991). L’étude permet aussi de préciser les concepts d’« utilisateur » et d’« utilisation de l’information ». Au plan pratique, la recherche permet d’aider à la conception de systèmes de repérage d’information adaptés aux besoins des cadres intermédiaires municipaux, et aide à évaluer l’apport des systèmes d’information archivistiques à la gestion de la mémoire organisationnelle.

Développement logiciel par transformation de modèles

La recherche en génie logiciel a depuis longtemps tenté de mieux comprendre le processus de développement logiciel, minimalement, pour en reproduire les bonnes pratiques, et idéalement, pour pouvoir le mécaniser. On peut identifier deux approches majeures pour caractériser le processus. La première approche, dite transformationnelle, perçoit le processus comme une séquence de transformations préservant certaines propriétés des données à l’entrée. Cette idée a été récemment reprise par l’architecture dirigée par les modèles de l’OMG. La deuxième approche consiste à répertorier et à codifier des solutions éprouvées à des problèmes récurrents. Les recherches sur les styles architecturaux, les patrons de conception, ou les cadres d’applications s’inscrivent dans cette approche. Notre travail de recherche reconnaît la complémentarité des deux approches, notamment pour l’étape de conception: dans le cadre du développement dirigé par les modèles, nous percevons l’étape de conception comme l’application de patrons de solutions aux modèles reçus en entrée. Il est coutume de définir l’étape de conception en termes de conception architecturale, et conception détaillée. La conception architecturale se préoccupe d’organiser un logiciel en composants répondant à un ensemble d’exigences non-fonctionnelles, alors que la conception détaillée se préoccupe, en quelque sorte, du contenu de ces composants. La conception architecturale s’appuie sur des styles architecturaux qui sont des principes d’organisation permettant d’optimiser certaines qualités, alors que la conception détaillée s’appuie sur des patrons de conception pour attribuer les responsabilités aux classes. Les styles architecturaux et les patrons de conception sont des artefacts qui codifient des solutions éprouvées à des problèmes récurrents de conception. Alors que ces artefacts sont bien documentés, la décision de les appliquer reste essentiellement manuelle. De plus, les outils proposés n’offrent pas un support adéquat pour les appliquer à des modèles existants. Dans cette thèse, nous nous attaquons à la conception détaillée, et plus particulièrement, à la transformation de modèles par application de patrons de conception, en partie parce que les patrons de conception sont moins complexes, et en partie parce que l’implémentation des styles architecturaux passe souvent par les patrons de conception. Ainsi, nous proposons une approche pour représenter et appliquer les patrons de conception. Notre approche se base sur la représentation explicite des problèmes résolus par ces patrons. En effet, la représentation explicite du problème résolu par un patron permet : (1) de mieux comprendre le patron, (2) de reconnaître l’opportunité d’appliquer le patron en détectant une instance de la représentation du problème dans les modèles du système considéré, et (3) d’automatiser l’application du patron en la représentant, de façon déclarative, par une transformation d’une instance du problème en une instance de la solution. Pour vérifier et valider notre approche, nous l’avons utilisée pour représenter et appliquer différents patrons de conception et nous avons effectué des tests pratiques sur des modèles générés à partir de logiciels libres.