Tourism life cycle, tourism competitiveness and upgrading strategies in the Caribbean

In the 1980s Butler adapted the life cycle product model to the tourism industry and created the “Tourism Area Life Cycle (TALC) model”. The model recognizes six stages in the tourism product life cycle: exploration, investment, development, consolidation, stagnation and followed, after stagnation, by decline or revitalization of the product. These six stages can in turn be regrouped into four main stages. The Butler model has been applied to more than 30 country cases with a wide degree of success. De Albuquerque and Mc Elroy (1992) applied the TALC model to 23 small Caribbean island States in the 1990s. Following De Albuquerque and Mc Elroy, the TALC is applied to the 32 member countries of the Caribbean Tourism Organization (CTO) (except for Cancun and Cozumel) to locate their positions along their tourism life-cycle in 2007. This is done using the following indicators: the evolution of the level, market share and growth rate of stay-over arrivals; the growth rate and market share of visitor expenditures per arrival and the tourism styles of the destinations, differentiating between ongoing mass tourism and niche marketing strategies and among upscale, mid-scale and low-scale destinations. Countries have pursued three broad classes of strategies over the last 15 years in order to move upward in their tourism life cycle and enhance their tourism competitiveness. There is first a strategy that continues to rely on mass-tourism to build on the comparative advantages of “sun, sand and sea”, scale economies, all-inclusive packages and large amounts of investment to move along in Stage 2 or Stage 3 (Cuba, Dominican Republic, Puerto Rico). There is a second strategy pursued mainly by very small islands that relies on developing specific niche markets to maintain tourism competitiveness through upgrading (Anguilla, Antigua and Barbuda, British Virgin Islands and Turks and Caicos), allowing them to move from Stage 2 to Stage 3 or Stage 3 to a rejuvenation stage. There is a third strategy that uses a mix of mass-tourism, niche marketing and quality upgrading either to emerge onto the intermediate stage (Trinidad and Tobago); avoid decline (Aruba, The Bahamas) or rejuvenate (Barbados, Jamaica and the United States Virgin Islands). There have been many success stories in Caribbean tourism competitiveness and further research should aim at empirically testing the determinants of tourism competitiveness for the region as a whole.

Análise de ciclo de vida de empreendimentos Turísticos no PNPG

Dissertação de mestrado integrado em Engenharia Civil

The tourism sector and the global economic crisis: development implicatins for the Caribbean

Over the past two years the global economy has experienced substantial economic turmoil, resulting in severe economic contraction. While there has been a recent return to growth, this situation has impacted all economic sectors worldwide. In the highly tourism-dependent region of the Caribbean, the impact of the global economic crisis has been most notable on the tourism sector, which, from the early 1990s, became the key driver of economic growth for the region. The eventual emergence of this sector reflects an economic development history which was previously underpinned by the export of agricultural commodities, and subsequently by the adoption of the import substitution industrialization model as promulgated by Arthur Lewis. This was further stimulated by spectacular economic contraction in Caribbean economies during the 1980s as a result of changes in the global terms of trade for commodities, generally low levels of competitiveness for manufactured goods, as well as weak institutional and governance frameworks. Ultimately, many economies began to reflect fiscal and balance of payments constraints. By the end of the 1990s, too, evidence of declining competitiveness even in the tourism sector began to become apparent particularly when evaluated under the framework of the Butler Tourism Area Life- Cycle (TALC) model. The recent economic crisis, therefore, provides an opportunity to reflect on the overall approach to economic development in the Caribbean, and to assess the implications of the region’s response to the crisis. This analysis makes the case for the future development of the sector to be based on two broad strategies. The first is to deepen the integration of the tourism sector into the broader economy through the diversification of the regional tourism product, as well as the enhancement of linkages with other sectors, while the second is to expand the tourism sector into a total service economy through the introduction of new services. Considering linkages, the development of clusters and value chains to support the tourism sector is identified with respect to agriculture and food, handicraft, and furnishings. Among the new services identified are education, wellness, yachting and boating, financial services, and information and communications technologies (ICT). This overall strategy is deemed to be better suited to the macroeconomic realities of the Caribbean, where high labour costs and other structural rigidities require a high-valued specialty tourism product in order to sustain the sector’s global competitiveness.

A evolução do turismo no Seridó: uma análise à luz do modelo de Butler

Tourism is configured as an activity that presents constant movement could boost local development in the economic, sociocultural and human in locations with potential for structuring and such. Because it is a dynamic activity, tourism allows changes in its flow, extending the periods of seasonality. To this end, in view of the aforementioned dynamics, it becomes relevant to the presence of tourism planning, initially starting from the government so that it create laws and standards and develop projects for the management of activities in an orderly way, seeking citizen participation, making essential the presence of actors and agents in local tourism, expanding democracy and knowledge of their place of origin. In this scenario, the Ministry of Tourism is emerging with the National Tourism Plan which incorporates among its actions, the Regionalization Program Guide, adopting a model of regional local management, a participatory manner, through the bodies of governance imposed at the poles, and the shares of public policy in their various departments most responsible for promoting tourism in pole Seridó. This scientific work aims to analyze the pole Seridó, under the theory of tourism area life cycle (TALC) proposed by BUTLER (1980), locating actions for tourism and chronology of the locality applied the proposed process activity. For both the methodology is descriptive and exploratory, qualitative approach, historical, descriptive and narrative level, non-probability sampling, using secondary sources, through documents and other records occurred during the planning processes in the region, in order to have access to information related to the planning process of tourism in Seridó, using as a way to research the data collected the technique of content analysis. As a conclusion of this study it is observed that from the survey in relation to the history of tourism in the region, economic activities of livestock, cotton industry, mining and ceramics industry were responsible for the initiation of tourism in the locality through the flow directed to the same, the insertion of the first hotels and performing traditional events, giving rise to the demand for public policies that aided in directing the activity being, therefore, inserted into the engagement phase, the second phase proposed by BUTLER (1980) model, and the study was terminated with suggestions for the continuation of tourism in the region.

Life cycle and reproductive traits of marine podonids (Cladocera, Onychopoda) in a coastal subtropical area

We studied the temporal distribution and reproductive biology of marine podonids during two consecutive years off Ubatuba, southeast coast of Brazil. Podonid specimens and their eggs and embryos were counted, measured and classified into categories. Pseudevadne tergestina was the most abundant species, and was more abundant in surface layers, in warm seasons, when the water column was stratified because of bottom intrusions of the cold and nutrient-rich South Atlantic Central Water (SACW) onto the inner shelf. Evadne spinifera had a similar temporal and vertical distribution, but with lower abundance and frequency. Pleopis schmackeri did not show a clear seasonal distribution, but preferred bottom layers. Pleopis polyphemoides and Podon intermedius occurred in low abundances, and only under SACW influence. Parthenogenetic females were dominant among all podonid species. Gamogenetic females of P. polyphemoides and P. intermedius were observed, but males of neither species occurred. This suggests that in tropical and subtropical regions, P. tergestina, E. spinifera and P. schmackeri reproduce through parthenogenesis during most of the year.

Life cycle analysis of zero waste management for Jonggol green city

A Zero waste management is believed to be one of methods to gain sustainability in urban areas. Take advantages of resources as enough as the needs and process it until the last part to be wasted is a contribution to take care the environment for the next generation. Reduce, reuse, and recycle are three simplesactivities which are until nowadays consideredas the back bone of zero waste. Jonggolgreen city is a new urban area in Indonesia with a 100 ha of surface area zoned as education tourism area. It is an independent area with pure natural resources of water, air, and land to be managed and protected. It is planned as green city through zero waste management since2013. In this preliminary period, a monitoring tool is being prepared by applying a Life Cycle Analysis (LCA) for urban areas [1]. This paper will present an explanatory assessment ofthe zero waste management for Jonggolgreen city. The existing situation will be examined through LCA and afterwards,the new program and the proposed green design to gain the next level of zero waste will be discussed. The purpose is to track the persistence of the commitment and the perception of the necessary innovationsin order to achieve the ideal behavior level of LCA.

Role of seipin in lipid droplet morphology and hepatitis C virus life cycle.

Infectious hepatitis C virus (HCV) particle assembly starts at the surface of lipid droplets, cytoplasmic organelles responsible for neutral fat storage. We analysed the relationship between HCV and seipin, a protein involved in lipid droplet maturation. Although seipin overexpression did not affect the total mean volume occupied by lipid droplets nor the total triglyceride and cholesterol ester levels per cell, it caused an increase in the mean diameter of lipid droplets by 60 %, while decreasing their total number per cell. The latter two effects combined resulted in a 34 % reduction of the total outer surface area of lipid droplets per cell, with a proportional decrease in infectious viral particle production, probably due to a defect in particle assembly. These results suggest that the available outer surface of lipid droplets is a critical factor for HCV release, independent of the neutral lipid content of the cell.

Managing induced tourism image : relational patterns and the life cycle

The tourism image is an element that conditions the competitiveness of tourism destinations by making them stand out in the minds of tourists. In this context, marketers of tourism destinations endeavour to create an induced image based on their identity and distinctive characteristics.A number of authors have also recognized the complexity of tourism destinations and the need for coordination and cooperation among all tourism agents, in order to supply a satisfactory tourist product and be competitive in the tourism market. Therefore, tourism agents at the destination need to develop and integrate strategic marketing plans.The aim of this paper is to determine how cities of similar cultures use their resources with the purpose of developing a distinctive induced tourism image to attract tourists and the extent of coordination and cooperation among the various tourism agents of a destination in the process of induced image creation.In order to accomplish these aims, a comparative analysis of the induced image of two cultural cities is presented, Girona (Spain) and Perpignan (France). The induced image is assessed through the content analysis of promotional brochures and the extent of cooperation with in-depth interviews of the main tourism agents of these destinations.Despite the similarities of both cities in terms of tourism resources, results show the use of different attributes to configure the induced image of each destination, as well as a different configuration of the network of tourism agents that participate in the process of induced image creation

Generic Life Cycle Cost Model and Cost-effective Solutions

Life cycle costing (LCC) practices are spreading from military and construction sectors to wider area of industries. Suppliers as well as customers are demanding comprehensive cost knowledge that includes all relevant cost elements through the life cycle of products. The problem of total cost visibility is being acknowledged and the performance of suppliers is evaluated not just by low acquisition costs of their products, but by total value provided through the life time of their offerings. The main purpose of this thesis is to provide better understanding of product cost structure to the case company. Moreover, comprehensive theoretical body serves as a guideline or methodology for further LCC process. Research includes the constructive analysis of LCC related concepts and features as well as overview of life cycle support services in manufacturing industry. The case study aims to review the existing LCC practices within the case company and provide suggestions for improvements. It includes identification of most relevant life cycle cost elements, development of cost breakdown structure and generic cost model for data collection. Moreover, certain cost-effective suggestions are provided as well. This research should support decision making processes, assessment of economic viability of products, financial planning, sales and other processes within the case company.

The use of life-cycle assessment to evaluate the environmental impacts of growing genetically modified, nitrogen use-efficient canola

Agriculture, particularly intensive crop production, makes a significant contribution to environmental pollution. A variety of canola (Brassica napus) has been genetically modified to enhance nitrogen use efficiency, effectively reducing the amount of fertilizer required for crop production. A partial life-cycle assessment adapted to crop production was used to assess the potential environmental impacts of growing genetically modified, nitrogen use-efficient (GMNUE) canola in North Dakota and Minnesota compared with a conventionally bred control variety. The analysis took into account the entire production system used to produce 1 tonne of canola. This comprised raw material extraction, processing and transportation, as well as all agricultural field operations. All emissions associated with the production of 1 tonne of canola were listed, aggregated and weighted in order to calculate the level of environmental impact. The findings show that there are a range of potential environmental benefits associated with growing GMNUE canola. These include reduced impacts on global warming, freshwater ecotoxicity, eutrophication and acidification. Given the large areas of canola grown in North America and, in particular, Canada, as well as the wide acceptance of genetically modified varieties in this area, there is the potential for GMNUE canola to reduce pollution from agriculture, with the largest reductions predicted to be in greenhouse gases and diffuse water pollution.

A case study to investigate the life cycle carbon emissions and carbon storage capacity of a cross laminated timber, multi-storey residential building

Forests are a store of carbon and an eco-system that continually removes carbon dioxide from the atmosphere. If they are sustainably managed, the carbon store can be maintained at a constant level, while the trees removed and converted to timber products can form an additional long term carbon store. The total carbon store in the forest and associated ‘wood chain’ therefore increases over time, given appropriate management. This increasing carbon store can be further enhanced with afforestation. The UK’s forest area has increased continually since the early 1900s, although the rate of increase has declined since its peak in the late 1980s, and it is a similar picture in the rest of Europe. The increased sustainable use of timber in construction is a key market incentive for afforestation, which can make a significant contribution to reducing carbon emissions. The case study presented in this paper demonstrates the carbon benefits of a Cross Laminated Timber (CLT) solution for a multi-storey residential building in comparison with a more conventional reinforced concrete solution. The embodied carbon of the building up to completion of construction is considered, together with the stored carbon during the life of the building and the impact of different end of life scenarios. The results of the study show that the total stored carbon in the CLT structural frame is 1215tCO2 (30tCO2 per housing unit). The choice of treatment at end of life has a significant effect on the whole life embodied carbon of the CLT frame, which ranges from -1017 tCO2e for re-use to +153tCO2e for incinerate without energy recovery. All end of life scenarios considered result in lower total CO2e emissions for the CLT frame building compared with the reinforced concrete frame solution.

Life cycle assessment of trayless dining

Universities in the United States are applying more sustainable approaches to their dining service operations. "The increase in social consciousness and environmental stewardship on college campuses has spurred an array of new and innovative sustainability programs"(ARAMARK Higher Education 2008). University residence dining is typically cafeteria style, with students using trays to carry food. Studies report that food served without trays substantially reduces food waste and water and electrical consumption associated with washing trays. Commonly, these reported results are estimates and not measurements taken under actual operating conditions. This study utilizes measurements recorded under actual dining service conditions in student residence halls at Michigan Technological University to develop the following: 1) operational-specific data on the issues and potential savings associated with a conversion to trayless dining and 2) life cycle assessment (LCA) cost and environmental impact analyses comparing dining with and without trays. For the LCA, the entire life cycle of the system is considered, from the manufacturing to the usage and disposal phases. The study shows that trayless dining reduces food waste because diners carry less food. The total savings for the diner shifts when not using trays for the standard academic year (205 days), with an average number of 700 diners, is 7,032 pounds of food waste from the pre-rinse area (33% reduction) and 3,157 pounds of food waste from the pan washing area (39% reduction). In addition, for each day of the study, the diners consumed more food during the trayless portion of the experiment. One possible explanation for the increased food consumption during this short duration study could be that the diners found it more convenient to eat the extra food on their plate rather than carrying it back for disposal. The trayless dining experiment shows a reduction in dishwasher water, steam, and electrical consumption for each day of the study. The average reduction of dishwasher water, steam, and electrical consumption over the duration of the study were 10.7%, 9.5%, and 6.4% respectively. Trayless dining implementation would result in a decrease of 4,305 gallons of consumption and wastewater discharge, 2.87 mm BTU of steam consumption, and 158 kWh of electrical consumption for the dinner shift over the academic year. Results of the LCA indicate a total savings of $190.4 when trays are not used during the dinner shift. Trayless dining requires zero CO2 eq and cumulative energy demand in the manufacturing stage, reductions of 1005 kg CO2 eq and 861 MJ eq in the usage phase, and reductions of 6458 kg CO2 eq and 1821 MJ eq in the end of the life cycle.

The Bali bombs and the tourism development cycle

This paper analyses the impact of the Bali bombings on international visitor arrivals in Bali and compares this crisis with previous crises with reference to Butler’s hypothetical tourism area life cycle. The paper demonstrates that the Bali bombings had by far the greatest impact on international tourism visitation than any other crisis in the island’s history. Such was the severity of the decline in Bali that both national and local measures were taken to restore confidence. Important though these measures were, they do not fully account for the strong resurgence in international arrivals, suggesting that the destination has not yet reached consolidation in accordance with Butler’s hypothesis and that the strength of the resurgence owes much to the underlying trend of the development phase associated with the general picture proposed by Butler.