Mineralogical and microthermometric studies and structural aspects of imperial topaz mineralization in Antonio Pereira, Ouro Preto District (Minas Gerais) - Brazil

The occurrences of imperial topaz in the Antonio Pereira mine, Ouro Preto, Minas Gerais, are associated with the metamorphic carbonate rocks of the Minas Supergroup. The crystals have densities varying from 3.46 to 3.58. The parameters of the unitary cells obtained were: 4.658 to 4.663 angstrom (ao), 8.823 to 8.832 angstrom (b(o)), 8.382 to 8.389 angstrom (c(o)), and 344.65 to 345.46 angstrom 3 (V). The refraction indices presented the following variations: 1.622 to 1.630 (nX), 1.624 to 1.632 (nY), 1.633 to 1.640 (nZ), and 0.008 to 0.011 (B). These properties are coherent with the low fluorine contents obtained (16,48%/17,05wt%). Infrared spectroscopy and microthermometry showed that the fluid inclusions, which represent the mineralizing fluids, are formed by H(2)O (with Ca(2+), Mg(2+) and Na(+)), and CO(2) +/- CH(4). The minimal trapping T-P conditions of 290/320 degrees C and 2,349/2,497bar were obtained for the primary fluid inclusions. The pseudo-secondary fluid inclusions were trapped at conditions of lower temperatures and variable pressures, during the deformation process under local alternating states of stress. The microthermometric studies, the structural analysis and the fluorine contents suggest that the mineralized veins were formed from hydrothermal fluids originated during the Brasiliano tectono-metamorphic event.

Color Dependence on Thickness in Topaz Crystal from Brazil

It is well known that crystals of topaz from the Eastern Brazilian Pegmatite Province may turn blue by the irradiation with Co-60 gamma rays followed by heat treatment. Also, it is known that the sensation of color changes with the thickness of these crystals. The dependence of the color, given by 1931 CIE chromaticity coordinates, with the thickness of the crystal was analyzed. The absorbance used in the calculation of these coordinates was given by the sum of Gaussian lines. The parameters of these lines were determined through the decomposition of the optical absorption spectra in the ultraviolet and visible regions. The decomposition revealed several lines, whose assignment was made considering studies in spodumene and beryl crystals and highly accurate quantum mechanical calculations. The transmittance becomes very narrow with increasing thickness, and the CIE chromaticity coordinates converge to the borderline of the CIE Chromaticity Diagram at the wavelength of maximum transmittance. Furthermore, the purity of color increases with increasing thickness, and the dominant wavelength reaches the wavelength of maximum transmittance.

Insights into molecular mechanisms regulating the activity of multidomain proteins in living cells using FRET-FLIM

FRET-FLIM, ENERGY TRANSFER, LIFETIME, DECAY ASSOCIATED SPECTRUM, DAS, KINASE, MAGUKS, SINGLE PHOTON COUNTING, PICOSECOND-TIME RESOLVED FLUORESCENCE SPECTROSCOPY, GFP, CFP, YFP, TOPAZ, NANOMETER, MICROSCOPY, LYMPHOCYTES, LCK, SAP97

NMR in Crystals and Powders of Topazes with Different Colours

The present work is a part of the large project with purpose to investigate microstructure and electronic structure of natural topazes using NMR method. To reach this task we determined the relative contents of fluorine and hydrogen in crystals blue, colorless, wine and wine irradiated topazes. Then we determined the electric field gradients in site of aluminium atoms by NMR method, calculated EFG using ab initio method, and measured relaxation time dependence on heating temperature for blue, colorless, Swiss blue and sky blue topazes. Nuclear magnetic resonance (NMR) is an effective method to investigate the local structure in the crystal. The NMR study of the single crystal gives detailed information especially about the local crystal structure. As a result of this work we have received practical data, which is possible to use in future for making personal dosimetry and for preparation of mullite, which is widely used in traditional and advanced ceramic materials.

UV optical absorption spectra analysis of beryl crystals from Brazil

The spectral decomposition analysis was applied to the optical absorption spectra of green and colorless beryl crystals from the Brazilian Eastern Pegmatitic province in the natural state, Submitted to heat treatment and irradiated with UV light The attributions of the lines were made taking into account highly accurate quantum mechanical calculations The deconvolution of the green beryl spectra revealed four lines, two of them around 12,000 cm(-1) (1 5eV) and two of them around 34,000 cm(-1) (4.2 eV) attributed to Fe(2+) and Fe(3+), respectively The deconvolution of the colorless beryl spectra without any treatment, after heating and for the same heat treatment followed by UV light irradiation revealed five lines The analysis of ratio relations showed that the lines at 36,400 cm(-1) (4.5 eV) and 41,400 cm(-1) (5 1 eV) belongs to a single defect attributed to a silicon dangling bond defect (=Si). Discussions and comparison with reported defects in quartz have supported the allocation of the lines at 61,000 cm(-1) (7.6 eV) and 43,800 cm(-1) (5 4 eV) to diamagnetic oxygen vacancy defect ( Si-Si ) and unrelaxed ( Si Si ) defect, respectively Finally, the line at 39.100 cm(-1) (4.8 eV), quite polarized along the c-axis, was attributed to a (Fe(2+) OH(-)) defect in the structural channels (C) 2009 Elsevier B V All rights reserved

Sn-polymetallic greisen-type deposits associated with late-stage rapakivi granites, Brazil: fluid inclusion and stable isotope characteristics

Tin-polymetallic greisen-type deposits in the Itu Rapakivi Province and Rondonia Tin Province, Brazil are associated with late-stage rapakivi fluorine-rich peraluminous alkali-feldspar granites. These granites contain topaz and/or muscovite or zinnwaldite and have geochemical characteristics comparable to the low-P sub-type topaz-bearing granites. Stockworks and veins are common in Oriente Novo (Rondonia Tin Province) and Correas (Itu Rapakivi Province) deposits, but in the Santa Barbara deposit (Rondonia Tin Province) a preserved cupola with associated bed-like greisen is predominant. The contrasting mineralization styles reflect different depths of formation, spatial relationship to tin granites, and different wall rock/fluid proportions. The deposits contain a similar rare-metal suite that includes Sri (+/-W, +/-Ta, +/-Nb), and base-metal suite (Zn-Cu-Pb) is present only in Correas deposit. The early fluid inclusions of the Correas and Oriente Novo deposits are (1) low to moderate-salinity (0-19 wt.% NaCl eq.) CO2-bearing aqueous fluids homogenizing at 245-450 degreesC, and (2) aqueous solutions with low CO2, low to moderate salinity (0-14 wt.% NaCl eq.), which homogenize between 100 and 340 T. In the Santa Barbara deposit, the early inclusions are represented by (1) low-salinity (5-12 wt.% NaCl eq.) aqueous fluids with variable CO2 contents, homogenizing at 340 to 390 T, and (2) low-salinity (0-3 wt.% NaCl eq.) aqueous fluid inclusions, which homogenize at 320380 degreesC. Cassiterite, wolframite, columbite-tantalite, scheelite, and sulfide assemblages accompany these fluids. The late fluid in the Oriente Novo and Correas deposit was a low-salinity (0-6 wt.% NaCl eq.) CO2-free aqueous solution, which homogenizes at (100-260 degreesC) and characterizes the sulfide fluorite-sericite association in the Correas deposit. The late fluid in the Santa Barbara deposit has lower salinity (0-3 wt.% NaCl eq.) and characterizes the late-barren-quartz, muscovite and kaolinite veins. Oxygen isotope thermometry coupled with fluid inclusion data suggest hydrothermal activity at 240-450 degreesC, and 1,0-2.6 kbar fluid pressure at Correas and Oriente Novo. The hydrogen isotope composition of breccia-greisen, stockwork, and vein fluids (delta(18)O quartz from 9.9parts per thousand to 10.9parts per thousand, deltaDH(2)O from 4.13parts per thousand to 6.95parts per thousand) is consistent with a fluid that was in equilibrium with granite at temperatures from 450 to 240 degreesC. In the Santa Barbara deposit, the inferred temperatures for quartz-pods and bed-like greisens are much higher (570 and 500 degreesC, respectively), and that for the cassiterite-quartz-veins is 415 degreesC. The oxygen and hydrogen isotope composition of greisen and quartz-pods fluids (delta(18)O(qtz-H2O)=5.5-6.1parts per thousand) indicate that the fluid equilibrated with the albite granite, consistent with a magmatic origin. The values for mica (delta(18)O(mica-H2O)=33-9.8parts per thousand) suggest mixing with meteoric water. Late muscovite veins (delta(18)O(qtz-H2O)=-6.4parts per thousand) and late quartz (delta(18)O(mica-H2O)=-3.8parts per thousand) indicate involvement of a meteoric fluid. Overall, the stable isotope and fluid inclusion data imply three fluid types: (1) an early orthomagmatic fluid, which equilibrated with granite; (2) a mixed orthomagmatic-meteoric fluid; and (3) a late hydrothermal meteoric fluid. The first two were responsible for cassiterite, wolframite, and minor coluChange in the redox conditions related to mixing-of magmatic and meteoric fluids favored important sulfide mineralization in the Correas deposit. (C) 2004 Elsevier B.V. All rights reserved.

Geologia e mineralogia de pegmatito mineralizado em estanho e metais associados (Nb, Ta, Zn, Cu, Pb), Mina Bom Futuro, Rondônia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Petrography, magnetic susceptibility and geochemistry of the Rio Branco Granite, Carajás Province, southeast of Pará, Brazil

Petrografia, suscetibilidade magnética e geoquímica do Granito Rio Branco, Província Carajás, sudeste do Pará, Brazil. O Granito Rio Branco é um stock paleoproterozoico intrusivo no biotita-monzogranito arqueano Cruzadão. Ocorre a oeste da cidade de Canaã dos Carajás, nas proximidades da mina de cobre do Sossego na Província Carajás. É constituído por sienogranitos não deformados e isotrópicos, hololeucocráticos, em geral de granulação média. A mineralogia é formada por feldspato alcalino pertítico, quartzo e plagioclásio. A biotita, intensamente cloritizada, é a principal fase máfica, acompanhada por flluorita, allanita, zircão, pirita e calcopirita como minerais acessórios. Albitização e, com menor intensidade greisenização, afetaram o granito, sendo a mineralogia secundária albita, fluorita, topázio, clorita, muscovita, siderofilita e óxidos e/ou hidróxidos de ferro. O Granito Rio Branco apresenta valores sistematicamente baixos de suscetibilidade magnética (SM) variando de 1,3 x 10^-5 a 6,96 x 10^-4 (SI). Geoquimicamente, é metaluminoso a peraluminoso, possui altas razões FeOt/(FeOt + MgO) e mostra afinidades com granitos ferrosos, tipo-A do subtipo A2. Os padrões dos ETR revelam um ligeiro enriquecimento de ETR leves em relação ao ETR pesados e anomalia negativa acentuada de Eu (Eu/Eu* = 0,08 - 0,13), resultando feição em "gaivota", característica de granitos evoluídos. O conjunto de dados obtidos demonstra o caráter evoluído do Granito Rio Branco e sua derivação a partir de líquidos reduzidos e enriquecidos em voláteis, causadores das transformações hidrotermais tardias. O estudo comparativo deste corpo com aqueles das suítes anorogênicas da Província Carajás sugere que o Granito Rio Branco possui maior afinidade com os granitos das suítes Velho Guilherme e, em menor grau, Serra dos Carajás. Por outro lado, é claramente distinto da Suíte Jamon. Embora apresente características similares às dos granitos especializados em estanho, não há mineralizações desta natureza associadas ao corpo.

Mineralogia dos greisens da área Grota Rica, Plúton Água Boa, Pitinga, Amazonas

O topázio-álcali-feldspato-granito, fácies mais evoluída do plúton Água Boa, foi afetado por processos de alteração hidrotermal, que culminaram com a formação de greisens e veios de quartzo, principais hospedeiros de mineralizações de Sn e, subordinadamente, Zn. Os greisens foram classificados como quartzo-topázio-siderofilita-greisen, topázio-siderofilita-quartzo-greisen e topázio-quartzo-greisen. São compostos por quartzo, siderofilita e topázio, acompanhados por quantidades variáveis de fluorita, zinnwaldita, esfalerita, cassiterita, zircão, anatásio e, localmente, Ce-monazita, galena, pirita, calcopirita e bismuto nativo. Estudos de química mineral em microssonda eletrônica permitiram identificar três tipos de micas: (1) siderofilita marrom, presente no topázio-granito; (2) siderofilita verde, encontrada nos greisens; (3) zinnwaldita, fracamente colorida, encontrada como coroas finas e descontínuas em torno da siderofilita verde dos greisens, e encontrada também em veios de quartzo. A composição da siderofilita do granito varia com a proximidade dos greisens, mostrando uma evolução de siderofilita siderofilita litinífera, com aumento nos conteúdos de ^VIAl, Li e Si. A siderofilita do greisen foi, por sua vez, parcialmente substituída por zinnwaldita, também com aumento nos teores de ^VIAl, Li e Si. A cassiterita nos greisens forma cristais euédricos a subédricos em contato reto com siderofilita ou como agregados junto com topázio, quartzo e fluorita. Exibe cristais maclados, zonados e com forte pleocroísmo. As composições muito puras e baixos conteúdos de Nb e Ta, indicam formação em condições hidrotermais.

Caracterização petrográfica das zonas de alteração hidrotermal associadas aos pegmatitos da mina Bom Futuro, Rondônia

The Bom Futuro tin deposit is located in Ariquemes, north-central state of Rondônia. Since its discovery in the late 80s, the tin deposit of Bom Futuro has been explored and considered one of the leading Brazilian producers of cassiterite, exploring it mainly in secondary deposits (placers) in the vicinity of the hill Bom Futuro. The primary mineralization occurs in the contacts between quartz veins and pegmatites with the rocks of the hill and its exploitation has been the goal of new studies in the area. These bodies occur in all rock types of the hill, leading edges of hydrothermal alteration with each rock. The focus of the study is the characterization of hydrothermal alteration through the analysis of the edges of pegmatitic veins intruded on each of the main rock types found on the hill Bom Futuro, which are: biotite gneiss, biotite amphibolite, subvolcanic breccia, topaz leucogranite, topaz leucoriolito and micro melassienito porphyry. The analysis and comparison showed familiarities between the edges of alteration encountered, and possible subdivision into three main zones: the inner zone or the vein itself, intermediate zone or transition zone and the change zone where the passage of hydrothermal features to rocks features is gradual. The cassiterite and sphalerite were found scattered in three zones, however in larger quantities in the intermediate zone, near the contact

Áreas degradadas pela explotação de cassiterita: avaliação das condições dos agregados e atividades biológicas

Pós-graduação em Ciências Ambientais - Sorocaba

The Christensen Sillimanite Deposit Southeast of Dillon, Montana

The minerals sillimanite, kyanite, andalusite, dumortierite, and topaz comprise a group of minerals whose high alumina content and physical properties are particularly desirable in the manufacture of refractory products. Sillimanite is the least plentiful of the minerals of this group, and for this reason it is not used extensively at the present time. However, it would be very desirable to the refractory industry if a suitable domestic source of supply could be established.

Minerals and geochemistry of DSDP Hole 81-552A

The acid insoluble coarse fractions of the glacial-interglacial sequence of Hole 552A in the NE Atlantic are made up of varying amounts of terrigenous detritus, biogenic silica, and pyroclastic material, principally volcanic glass. Volcanic ash content varies significantly over the entire interval, and the three North Atlantic ash horizons of Ruddiman and Glover (1972) can be recognized satisfactorily. The terrigenous detritus is of mixed metamorphic-basaltic type and probably originated on the Greenland landmass