Relationship between maxillary and mandibular base lengths and dental crowding in patients with complete Class II malocclusions

Objective: To verify the relationship between maxillary and mandibular effective lengths and dental crowding in patients with Class II malocclusions. Materials and Methods: The sample comprised 80 orthodontic patients with complete Class II malocclusions in the permanent dentition (47 male, 33 female) who were divided into two groups according to the amount of mandibular tooth-arch size discrepancy. The maxillary and mandibular effective lengths (Co-A and Co-Gn) and tooth-arch size discrepancies were measured on the initial cephalograms and dental casts, respectively. Intergroup comparisons of apical base lengths were performed with independent t-tests. Correlation between base length and dental crowding was examined by means of Pearson's correlation coefficient (P < .05). Results: Patients with Class II malocclusion and moderate to severe crowding had significantly smaller maxillary and mandibular effective lengths than subjects with the same malocclusion and slight mandibular crowding. A weak inverse correlation was also found between maxillary and mandibular effective lengths and the severity of dental crowding. Conclusion: Decreased maxillary and mandibular effective lengths constitute an important factor associated with dental crowding in patients with complete Class II malocclusion. (Angle Orthod. 2011;81:217-221.)

Unilateral Correction of Space Loss in the Mixed Dentition

Distalization of maxillary molars is indicated for correction of Class II dental malocclusion and for space gain in cases of space deficiency. The ideal treatment with an intraoral fixed appliance for molar distalization should fulfill the following requirements: patient compliance; acceptable esthetics; comfort; minimum anterior anchor loss (as evidenced by inclination of incisors); bodily movement of the molars to avoid undesirable effects and unstable outcomes; and minimum time required during sessions for placement and activations. The purpose of this paper was to present an alternative treatment for space recovery in the area of the maxillary right second premolar when there has been significant mesial movement of the permanent maxillary right first molar. We used a modified appliance that allows unilateral molar distalization in cases of unilateral tooth/arch size discrepancy using the opposite side as anchor, thus reducing the mesialization of the anterior teeth. (Pediatr Dent 2008;30:334-41) Received August 17, 2006 / Last Revision October 17, 2007 / Revision Accepted October 17, 2007

Programa de extrações seriadas: variáveis relacionadas com a extração de pré-molares

OBJETIVO: verificar o percentual de pacientes que necessitaram extração de dentes permanentes, pré-molares, dentre aqueles tratados com extração de dentes decíduos para correção do apinhamento primário na dentição mista, bem como analisar as possíveis variáveis relacionadas. MÉTODOS: a amostra foi composta por documentações ortodônticas de 70 pacientes na dentição permanente, cujo tratamento iniciou-se na dentição mista com planejamento de um programa de extrações seriadas (PES). Todos os prontuários foram analisados por um único examinador, no intuito de verificar se o PES havia sido cumprido com a extração de dentes permanentes ou se havia sido realizada apenas extração de dentes decíduos. Verificou-se a associação entre a extração de dentes permanentes e as variáveis padrão facial; relação sagital entre as arcadas dentárias; IMPA; proporção tamanho do segundo molar permanente inferior/espaço retromolar; mecânica de controle de espaço e discrepância de modelo (teste exato de Fisher para as variáveis categóricas e modelo de regressão logística para as variáveis numéricas). Os resultados foram considerados para p<0,05. RESULTADOS: dos pacientes que haviam sido tratados com extração de dentes decíduos para a correção do apinhamento na dentição mista, 70% necessitaram de extração de dentes permanentes. A análise estatística não mostrou associação significativa entre as variáveis estudadas e a necessidade de extração de dentes permanentes, com exceção da variável discrepância de modelo. CONCLUSÃO: a discrepância de modelo representou a principal determinante de extração de pré-molares no PES.

Effect of 0.4% stannous fluoride gel on Streptococci mutans in relation to elastomeric rings and steel ligatures in orthodontic patients

Background: Patients with fixed orthodontic appliances often experience an absolute increase in the number of Streptococci mutans colony-forming units (cfu). The aim of this investigation was to study the development of biofilm and S. mutans cfu in connection with stainless steel ligatures and elastomeric rings in orthodontic patients treated with and without 0.4% stannous fluoride gel (SFG). Material: Forty-seven patients were divided into 2 groups: those treated with 0.4% SFG for 4 minutes (experimental) and those without 0.4% SFG (control). In each patient, elastomeric rings were used for ligation on 1 side of the dental arch midline, and stainless steel ligatures were used on the opposite side. Saliva samples were collected before and after appliance placement. At 15 and 30 days after appliance placement, biofilm samples from the stainless steel ligatures and the elastomeric rings were collected and subjected to microbiologic procedures and scanning electron microscopy (SEM) analysis. Results: The numbers of S. mutans cfu in the saliva and biofilm were not statistically different between the teeth fitted with elastomeric rings and stainless steel ligatures, or between the experimental and control groups. SEM analysis showed biofilm formation on both ligature ties. Conclusions: Topical application of 0.4% SFG in orthodontic patients with elastomeric rings or stainless steel ligatures does not cause a significant decrease in S. mutans cfu in the saliva and biofilm. Copyright © 2005 by the American Association of Orthodontists.

A new way of analyzing occlusion 3 dimensionally

This article introduces a new method for 3-dimensional dental cast analysis, by using a mechanical 3-dimensional digitizer, MicroScribe 3DX (Immersion, San Jose, Calif), and TIGARO software (not yet released, but available from the author at hayasaki@dent.kyushu-u.ac.jp). By digitizing points on the model, multiple measurements can be made, including tooth dimensions; arch length, width, and perimeter; curve of Spee; overjet and overbite; and anteroposterior discrepancy. The bias of the system can be evaluated by comparing the distance between 2 points as determined by the new system and as measured with digital calipers. Fifteen pairs of models were measured digitally and manually, and the bias was evaluated by comparing the variances of both methods and checking for the type of error obtained by each method. No systematic errors were found. The results showed that the method is accurate, and it can be applied to both clinical practice and research. Copyright © 2005 by the American Association of Orthodontists.

Intercommissural width in 4 racial groups as a guide for the selection of maxillary anterior teeth in complete dentures

Purpose: To determine whether intercommissural width is a reliable guide for the selection of maxillary denture teeth width. Materials and Methods: Casts were made of 160 subjects from 4 different racial groups. Locations of intercommissural width landmarks (the corners of the mouth) were made on the subjects and transferred to the casts. The distances between the corners of the mouth and the distal of the canines were measured on the casts and compared. Results: A weak correlation was found between the distal of the canines and the distance between the corners of the mouth in the 4 racial groups. Conclusion: The use of the corners of the mouth for the selection of artificial teeth is generally inaccurate.

Lower intercanine width and gingival margin changes. A retrospective study.

OBJECTIVE: To determine if changes in the lower intercanine widths during orthodontic treatment with fixed appliances result in gingival margin changes around the lower canines and incisors. METHOD: Pre- and post-treatment intra-oral photographs and orthodontic study models of 178 Caucasian adolescents (101 female, 77 male) were used. All subjects were treated with fixed appliances. The subjects had mean ages of 11.41 (SD: 1.83) years and 14.91 (SD: 1.78) years on their initial and final records respectively. The latter were taken 28 days or more after the appliances had been removed. The inclusion criteria were: Angle Class I or Class II malocclusion (with or without transverse and/or vertical discrepancies); nonextraction treatment; less than 4 mm crowding or spacing; fully erupted lower incisors and good periodontal health. The intercanine widths and the positions of the gingival margins relative to the maximum curvatures of the labial surfaces of the lower canines and incisors were measured with digital calipers. RESULTS: A significant association was found between unaltered intercanine widths and coronal migration of the gingival margins (p = 0.045). There were no significant associations between either increased or reduced intercanine widths and changes in the gingival margins. CONCLUSIONS: Following orthodontic treatment coronal migration of the gingival margins around the lower incisors and canines is more likely to be associated with an unaltered intercanine width.

Patients' expectation and satisfaction with removable dental prosthesis therapy and correlation with patients' evaluation of the dentists

Objective. Considering that patients' satisfaction is one of the most important goals in conducting removable dental prosthesis (RDP) therapy and the fact that there are many factors which influence this parameter, the present study aims to evaluate the expectation before and satisfaction after therapy with RDP in patients who seek such therapy. As a secondary objective, other variables that may be associated with patient satisfaction are also evaluated, such as gender, age, Kennedy's classification of the arch supporting the RDP, the number of RDP adjustments after delivery and patients' evaluation of the dentists' conduct. Materials and methods. A sample of 44 patients who received RDP therapy were assigned visual analog scale scores for their expectation before and satisfaction after therapy regarding chewing, aesthetics, comfort and phonetics. They also completed a questionnaire concerning the dentists' conduct. Results. There was no statistically significant difference among scores concerning different genders, age, number of post-delivery settings and arch involved in the RDP. Regarding patients' evaluation of the dentists' conduct, there was a predominance of positive evaluations, but only different answers to the statement (i.e. 'The dentist I saw thoroughly explained the recommended treatment before it commenced') present statistically significant different scores for chewing (p = 0.040) and phonetics (p = 0.046). Conclusions. The average visual analog scale scores were high for both expectation prior to treatment and satisfaction after treatment; however, the scores for expectations were higher than those for satisfaction. © 2013 Informa Healthcare.

Influence of anatomical location on CT numbers in cone beam computed tomography

Objective: To assess the influence of anatomical location on computed tomography (CT) numbers in mid- and full field of view (FOV) cone beam computed tomography (CBCT) scans. Study Design: Polypropylene tubes with varying concentrations of dipotassium hydrogen phosphate (K2HPO4) solutions (50-1200 mg/mL) were imaged within the incisor, premolar, and molar dental sockets of a human skull phantom. CBCT scans were acquired using the NewTom 3G and NewTom 5G units. The CT numbers of the K2HPO 4 phantoms were measured, and the relationship between CT numbers and K2HPO4 concentration was examined. The measured CT numbers of the K2HPO4 phantoms were compared between anatomical sites. Results: At all six anatomical locations, there was a strong linear relationship between CT numbers and K2HPO4 concentration (R 2 > 0.93). However, the absolute CT numbers varied considerably with the anatomical location. Conclusion: The relationship between CT numbers and object density is not uniform through the dental arch on CBCT scans. © 2013 Elsevier Inc.

Edentulism and shortened dental arch in Brazilian elderly from the National Survey of Oral Health 2003

OBJECTIVE: To describe the distribution of edentulism and estimate the prevalence of functional dentition and shortened dental arch among elderly population. METHODS: A population-based epidemiological study was carried out with a sample of 5,349 respondents aged 65 to 74 years obtained from the 2002 and 2003 Brazilian Ministry of Health/Division of Oral Health survey database. The following variables were studied: gender; macroregion of residence; missing teeth; percentage that met the World Health Organization goal for oral health in the age group 65 to 74 years (50% having at least 20 natural teeth); presence of shortened dental arch; number of posterior occluding pairs of teeth. The Chi-square test assessed the association between categorical variables. The Kruskal-Wallis and Mann-Whitney tests were used to assess differences of mean between number of posterior occluding pairs teeth, macro-region and gender. RESULTS: The elderly population had an average of 5.49 teeth (SD: 7.93) with a median of 0. The proportion of completely edentulous respondents was 54.7%. Complete edentulism was 18.2% in the upper arch and 1.9% in the lower arch. The World Health Organization goal was achieved in 10% of all respondents studied. However, only 2.7% had acceptable masticatory function and aesthetics (having at least shortened dental arch) and a mean number of posterior occluding pairs of 6.94 (SD=2.97). There were significant differences of the percentage of respondents that met the World Health Organization goal and presence of shortened dental arch between men and women. There were differences in shortened dental arch between macroregions. CONCLUSIONS: The Brazilian epidemiological oral health survey showed high rate of edentulism and low rate of shortened dental arch in the elderly population studied, thus suggesting significant functional and aesthetic impairment in all Brazilian macroregions especially among women.

Association between tooth loss and obesity in Brazilian adults: a population-based study

OBJECTIVE: To examine the association between tooth loss and general and central obesity among adults. METHODS: Population-based cross-sectional study with 1,720 adults aged 20 to 59 years from Florianópolis, Southern Brazil. Home interviews were performed and anthropometric measures were taken. Information on sociodemographic data, self-reported diabetes, self-reported number of teeth, central obesity (waist circumference [WC] > 88 cm in women and > 102 cm in men) and general obesity (body mass index [BMI] ≥ 30 kg/m²) was collected. We used multivariable Poisson regression models to assess the association between general and central obesity and tooth loss after controlling for confounders. We also performed simple and multiple linear regressions by using BMI and WC as continuous variables. Interaction between age and tooth loss was also assessed. RESULTS: The mean BMI was 25.9 kg/m² (95%CI 25.6;26.2) in men and 25.4 kg/m2 (95%CI 25.0;25.7) in women. The mean WC was 79.3 cm (95%CI 78.4;80.1) in men and 88.4 cm (95%CI 87.6;89.2) in women. A positive association was found between the presence of less than 10 teeth in at least one arch and increased mean BMI and WC after adjusting for education level, self-reported diabetes, gender and monthly per capita income. However, this association was lost when the variable age was included in the model. The prevalence of general obesity was 50% higher in those with less than 10 teeth in at least one arch when compared with those with 10 or more teeth in both arches after adjusting for education level, self-reported diabetes and monthly per capita family income. However, the statistical significance was lost after controlling for age. CONCLUSIONS: Obesity was associated with number of teeth, though it depended on the participants' age groups.

Gender differences in the association between tooth loss and obesity among older adults in Brazil

OBJECTIVE To analyze if differences according to gender exists in the association between tooth loss and obesity among older adults.METHODS We analyzed data on 1,704 older adults (60 years and over) from the baseline of a prospective cohort study conducted in Florianopolis, SC, Southern Brazil. Multivariable logistic regression models were used to assess the association between tooth loss and general and central obesity after adjustment for confounders (age, gender, skin color, educational attainment, income, smoking, physical activity, use of dentures, hypertension, and diabetes). Linear regressions were also assessed with body mass index and waist circumference as continuous outcomes. Interaction between gender and tooth loss was further assessed.RESULTS Overall mean body mass index was 28.0 kg/m2. Mean waist circumference was 96.8 cm for males and 92.6 cm for females. Increasing tooth loss was positively associated with increased body mass index and waist circumference after adjustment for confounders. Edentates had 1.4 (95%CI 1.1;1.9) times higher odds of being centrally obese than individuals with a higher number of teeth; however, the association lost significance after adjustment for confounders. In comparison with edentate males, edentate females presented a twofold higher adjusted prevalence of general and central obesity. In the joint effects model, edentate females had a 3.8 (95%CI 2.2;6.6) times higher odds to be centrally obese in comparison with males with more than 10 teeth present in both the arches. Similarly, females with less than 10 teeth in at least one arch had a 2.7 (95%CI 1.6;4.4) times higher odds ratio of having central obesity in comparison with males with more than 10 teeth present in both the arches.CONCLUSIONS Central obesity was more prevalent than general obesity among the older adults. We did not observe any association between general obesity and tooth loss. The association between central obesity and tooth loss depends on gender – females with tooth loss had greater probability of being obese.

Presence and morphology of the molar tubercle according to dentition, hemi-arch and sex

The purpose of this study was to assess the presence and the degree of expression of the molar tubercle according to sex, dentition and hemi-arches. Study casts of 126 patients were assessed, and those were under orthodontic treatment at the University of Franca, UNIFRAN; they were from both sexs, from 4 to 13 years old. The upper second primary molars and the upper first permanent molars, from both sides, were evaluated regarding the presence and the degree of expression of the molar tubercle. For an association study, the qui-square test was utilized. The concordance about the presence or absence of the molar tubercle according to dentition, hemi-arch and sex, was estimated by the Kappa Statistics. There was a sexual dimorphism concerning the presence/absence of the molar tubercle (p=0.009), however there was no significant association between the degree of expression of the tubercle and the sex (p=0.791). The molar tubercle was more frequently observed in the male sex, in upper second primary molars and in the form of depression. There was a significant and "moderate" concordance between the left and right sides in primary dentition (k=0.596), there was a "good" concordance in permanent dentition (k=0.708) and a "weak" and significant concordance between the presence of the molar tubercle and dentition (k=0.207).

Loss of space and dental arch length after the loss of the lower first primary molar: A longitudinal study

The premature loss of primary teeth may harm the normal occlusal development, although there are debates relating to the necessity of using space maintainer appliances. The aim of the study is to evaluate the changes in the dental arch perimeter and the space reduction after the premature loss of the lower first primary molar in the mixed dentition stage. The sample consists of 4 lower arch plaster models of 31 patients, within the period of pre-extraction, 6, 12 and 18 months after the lower first primary molar extraction. A reduction of space was noted with the cuspid dislocation and the permanent incisors moving toward the space of the extraction site. It was concluded that the lower first molar primary premature loss, during the mixed dentition, implicates an immediate placement of a space maintainer.

The role of superstructure material on the stress distribution in mandibular full-arch implant-supported fixed dentures. A CT-based 3D-FEA

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)