Innováció és dinamizmus. Kölcsönhatás a rendszerek és a technikai haladás között = Innovation and dynamism. Reciprocal effect between systems and technical advance

A posztszocialista átalakulással foglalkozó irodalom rendszerint az átmenet politikai, gazdasági és társadalmi oldalával foglalkozik, holott az elmúlt húsz évben fontos változások mentek végbe a technikai haladás terén is. A kapitalizmus egyik fő erénye a dinamizmus, a vállalkozás, az innovációs folyamat erős ösztönzése. Valamennyi (polgári célokra használt) forradalmian új terméket a kapitalista rendszer hozta létre, a szocialista rendszer legfeljebb katonai rendeltetésű új termékekkel tudott előállni. A cikk azt elemzi, hogy mennyiben magyarázható ez a mélyreható különbség a két rendszer veleszületett hajlamaival, alapvető tulajdonságaival. Az új termékek térhódítása (köztük a számítógép, a mobiltelefon, az internet, az információs-kommunikációs szféra radikális átalakulása) megváltoztatta az emberek mindennapi életét. Miközben sokan mindezt kedvező változásként élik meg, nem vesznek tudomást a kapitalista rendszer és a gyors technikai haladás közötti okozati összefüggésről. A kapitalizmusnak e fontos erényét a mikroökonómia szokványos oktatása sem világítja meg a diákok számára, és nem kap kellő hangsúlyt a vezető politikusok megnyilvánulásaiban sem. _________________ Literature on post-socialist transformation usually deals with the political, economic and social sides of it, although there have also been important changes in the field of technical advance in the last twenty years. One of capitalisms main virtues is the strong incentive it gives to dynamism, enterprise and the innovation process. Every revolutionary new prodŹuct (for civilian use) has been brought about by the capitalist system. The socialist system was capable at most of developing new military products. The article analyses how far this radical difference can be explained by the innate tendencies and basis attributes of the two systems. Our daily lives have been transformed by these new products (for instance, the sphere of information and communications by the computer, the mobile phone and the internet). While many people see all these as favourable changes, fewer discern the causal relation between the capitalist system and rapid technical progress. Yet the usual syllabus of microeconomics does not enlighten students on this important virtue of capitalism, which is not adequately emphasized in the statements of leading politicians either.

Land, technical progress and the falling rate of profit

The paper sets out a one sector growth model with a neoclassical production function in land and a capital-labour aggregate. Capital accumulates through capitalist saving, the labour supply is infinitely elastic at a subsistence wage and all factors may experience factor augmenting technical progress. The main result is that, if the elasticity of substitution between land and the capital-labour aggregate is less than one and if the rate of caital augmenting technical progress is strictly positive, then the rate of profit will fall to zero. The surprise is that this result holds regardless of the rate of land augmenting technical progress; that is, no amount of technical advance in agriculture can stop the fall in the rate of profit. The paper also discusses the relation of this result to the classical and Marxist literature and sets out the path of the relative price of land.

A Method for Generation of Bone Marrow-Derived Macrophages from Cryopreserved Mouse Bone Marrow Cells

The broad use of transgenic and gene-targeted mice has established bone marrow-derived macrophages (BMDM) as important mammalian host cells for investigation of the macrophages biology. Over the last decade, extensive research has been done to determine how to freeze and store viable hematopoietic human cells; however, there is no information regarding generation of BMDM from frozen murine bone marrow (BM) cells. Here, we establish a highly efficient protocol to freeze murine BM cells and further generate BMDM. Cryopreserved murine BM cells maintain their potential for BMDM differentiation for more than 6 years. We compared BMDM obtained from fresh and frozen BM cells and found that both are similarly able to trigger the expression of CD80 and CD86 in response to LPS or infection with the intracellular bacteria Legionella pneumophila. Additionally, BMDM obtained from fresh or frozen BM cells equally restrict or support the intracellular multiplication of pathogens such as L. pneumophila and the protozoan parasite Leishmania (L.) amazonensis. Although further investigation are required to support the use of the method for generation of dendritic cells, preliminary experiments indicate that bone marrow-derived dendritic cells can also be generated from cryopreserved BM cells. Overall, the method described and validated herein represents a technical advance as it allows ready and easy generation of BMDM from a stock of frozen BM cells.

Assessment of factors that confound MRI and neuropathological correlation of human postmortem brain tissue

In spite of considerable technical advance in MRI techniques, the optical resolution of these methods are still limited. Consequently, the delineation of cytoarchitectonic fields based on probabilistic maps and brain volume changes, as well as small-scale changes seen in MRI scans need to be verified by neuronanatomical/neuropathological diagnostic tools. To attend the current interdisciplinary needs of the scientific community, brain banks have to broaden their scope in order to provide high quality tissue suitable for neuroimaging- neuropathology/anatomy correlation studies. The Brain Bank of the Brazilian Aging Brain Research Group (BBBABSG) of the University of Sao Paulo Medical School (USPMS) collaborates with researchers interested in neuroimaging-neuropathological correlation studies providing brains submitted to postmortem MRI in-situ. In this paper we describe and discuss the parameters established by the BBBABSG to select and to handle brains for fine-scale neuroimaging-neuropathological correlation studies, and to exclude inappropriate/unsuitable autopsy brains. We tried to assess the impact of the postmortem time and storage of the corpse on the quality of the MRI scans and to establish fixation protocols that are the most appropriate to these correlation studies. After investigation of a total of 36 brains, postmortem interval and low body temperature proved to be the main factors determining the quality of routine MRI protocols. Perfusion fixation of the brains after autopsy by mannitol 20% followed by formalin 20% was the best method for preserving the original brain shape and volume, and for allowing further routine and immunohistochemical staining. Taken to together, these parameters offer a methodological progress in screening and processing of human postmortem tissue in order to guarantee high quality material for unbiased correlation studies and to avoid expenditures by post-imaging analyses and histological processing of brain tissue.

A constituição do Instituto de Educação de Vitória/ES e a formação de professores primários no Espírito Santo (1971-2000)

Investiga o processo de transição da Escola Normal para outro espaço físico sob a forma de Instituto de Educação e os desdobramentos dessa mudança na formação de professores no Espírito Santo, segundo as diretrizes instituídas pela Lei nº. 5.692/71, durante o Regime Ditatorial Brasileiro (1964-1985). O recorte temporal inicia-se em 1971, quando ocorreu a transição, e encerra-se no ano 2000, momento em que o Instituto passa a denominar-se Escola Estadual de 2º grau Professor Fernando Duarte Rabelo. Privilegia, como interlocutores teóricos, os historiadores Carlo Ginzburg (1986, 2006), Marc Bloch (2001) e Michel de Certeau (2004) e toma, como corpus documental, propostas curriculares do Estado, portarias, matérias de jornais, fotografias de eventos realizados pela instituição e entrevistas com sujeitos que atuaram naquele espaço como professoras, diretora e aluna. As fontes foram interrogadas a partir das seguintes questões: como se deu a transição da Escola Normal D. Pedro II para o Instituto de Educação de Vitória? Que motivos levaram a essa transição? Como se configurou a formação de professores no Instituto de Educação? Quais os desdobramentos das mudanças ocorridas, em se tratando da formação de professores capixabas? Pareceram intrigantes silêncios e lacunas observados em relação à transição da Escola Normal para o Instituto de Educação e aos motivos que desencadearam essa mudança. Das falas das professoras, depreende-se que decisões sobre a transferência do espaço físico e as modificações no currículo vieram prontas, de cima para baixo. O discurso da modernização alardeia a técnica e o tecnicismo e anuncia novidades. A Escola Normal e as suas tradições passam a habitar o passado como algo que se apaga em nome do avanço técnico. Ainda que sutilmente, o cheiro do cafezinho gratuito e do mingau fizessem espargir o aroma da saudade de um outro tempo em que o lanche dos professores da Escola Normal era um encontro “solene”. Conclui-se que a abrupta descontinuidade da Escola Normal, cujo prédio passou a abrigar a atual Escola Estadual Maria Ortiz, possivelmente não se esgota nas questões de ordem técnico-pedagógica que os documentos deixam explícitas. Entretanto, tendo em vista o cronograma limitado desta pesquisa e a lacuna das fontes, não foi possível explorar outras possibilidades de resposta.

Competitive interactions between species of freshwater snails: I. Laboratory: Ia. General methodology

For the development of laboratory experiments on the competitive interacitons between freshwater snail populations, special snail rooms were set up in the main building of the Research Center "Aggeu Magalhães". In the current paper, the first of a series on this subject, the general methodology of the laboratory work is described in detail. Using indoor cement channels in which a uniform seminatural environment was created, interactions of freshwater snail populations can be studied with minimal interference of the usual variables. Controlled indoor environmental techniques, as described in the current paper, may also be utilized in different types of experiments in malacology, and represent a substantial technical advance in malacological work.

Transmission Fourier transform infrared microspectroscopy allows simultaneous assessment of cutin and cell-wall polysaccharides of Arabidopsis petals.

A procedure for the simultaneous analysis of cell-wall polysaccharides, amides and aliphatic polyesters by transmission Fourier transform infrared microspectroscopy (FTIR) has been established for Arabidopsis petals. The combination of FTIR imaging with spectra derivatization revealed that petals, in contrast to other organs, have a characteristic chemical zoning with high amount of aliphatic compounds and esters in the lamina and of polysaccharides in the stalk of the petal. The hinge region of petals was particular rich in amides as well as in vibrations potentially associated with hemicellulose. In addition, a number of other distribution patterns have been identified. Analyses of mutants in cutin deposition confirmed that vibrations of aliphatic compounds and esters present in the lamina were largely associated with the cuticular polyester. Calculation of spectrotypes, including the standard deviation of intensities, allowed detailed comparison of the spectral features of various mutants. The spectrotypes not only revealed differences in the amount of polyesters in cutin mutants, but also changes in other compound classes. For example, in addition to the expected strong deficiencies in polyester content, the long-chain acyl CoA synthase 2 mutant showed increased intensities of vibrations in a wavelength range that is typical for polysaccharides. Identical spectral features were observed in quasimodo2, a cell-wall mutant of Arabidopsis with a defect in pectin formation that exhibits increased cellulose synthase activity. FTIR thus proved to be a convenient method for the identification and characterization of mutants affected in the deposition of cutin in petals.

Cobalt and molybdenum concentrated suspension for soybean seed treatment

The concentrated suspension (CS), the basis of Mo trioxide, allows high Mo concentrations and is therefore a technical advance for seed treatment, since it allows the recommendation of the Mo at lower dosage than with the liquid solution formulations (LS). The purpose of this research was to evaluate the efficiency and doses of fertilizer with Mo and Co in concentrated suspension in comparison with liquid solution as well as fertilizers associated with phytohormones, applied in seed treatments, and their effect on soybean yield. Two experiments were carried out in the growing seasons of 2004/2005 and 2005/2006 at the Universidade Federal de Uberlandia (UFU).The first was conducted in an experimental area on the Fazenda Capim Branco, with six treatments and four replications: (1) Mo and Co (CS) - 22 g ha-1 + 1.08 g ha-1; (2) Mo and Co (CS) - 22 g ha-1 + + 1.08 g ha-1 + phytohormone -200 mL ha-1; 3) Mo and Co (LS), 20.7 g ha-1 + 4.13 g ha-1; 4) Mo and Co (LS), 20.7 g ha-1 + 4.13 g ha-1 + phytohormone -200 mL ha-1; (5) + control phytohormone-200 mL ha-1; and (6) control (free of Mo and Co in the seed treatment). The phytohormone consisted of: auxin (11 mg L-1) and cytokynin (0.031 mg L-1). The soybean cultivar Monsoy 8004 was used and a fertilization of 400 kg ha-1 of 02-20-20 NPK fertilizer was applied at sowing. Based on the results of the first experiment, the second was conducted on the Fazenda Floresta do Lobo, in Uberlândia, MG, evaluated in a randomized block design with nine treatments and four replications. The treatments consisted of Mo and Co (g ha-1) doses applied to soybean seeds, as CS formulation (15, 25, 35, 45, 60 and 0.74; 1.23; 1.72; 2.21; 2.95) and LS- (15; 20; 25 and 3.18; 4.25; 5.31), respectively, and the control (free of Mo and Co in the seed treatment). The variety Monarch was used, fertilized with 300 kg ha-1 of NPK fertilizer (03-32-06) at sowing; and 78 kg ha-1 (K2O) in topdressing 30 days after soybean emergence. The Mo and Co doses in the seed treatment with LS and CS resulted in higher soybean yields than in the control, from 20 g ha-1 Mo and 4.25 g ha-1 Co in liquid solution and 35 g ha-1Mo and 1.72 g ha-1 Co in the concentrated suspension.

Anastomose duodenoduodenal na pancreatoduodenectomia por pancreatite crônica

Literature has been showing a tendency of reducing the limits of Whipple's resection. The main technical advance was the pylorus preserving resection, technique proposed by Traverso and Longmire in 1978. The pancreticoduodenectomy for chronic pancreatitis, is probably the best opportunity to apply this type of procedure. In these specific patients, the author preserved the pylorus and the third portion of the duodenum. The gastrointestinal transit was reconstructed by the duodenumduodenal anastomosis and the bile duct and the pancreas were drained in a Roux-en-way loop . Follow-up showed no important complication, with no problems related to gastric emptying and without pain.

Fingerprinting of cell lines by directed amplification of minisatellite-region DNA (DAMD)

The development of in vitro propagation of cells has been an extraordinary technical advance for several biological studies. The correct identification of the cell line used, however, is crucial, as a mistaken identity or the presence of another contaminating cell may lead to invalid and/or erroneous conclusions. We report here the application of a DNA fingerprinting procedure (directed amplification of minisatellite-region DNA), developed by Heath et al. [Nucleic Acids Research (1993) 21: 5782-5785], to the characterization of cell lines. Genomic DNA of cells in culture was extracted and amplified by PCR in the presence of VNTR core sequences, and the amplicons were separated by agarose gel electrophoresis. After image capture with a digital camera, the banding profiles obtained were analyzed using a software (AnaGel) specially developed for the storage and analysis of electrophoretic fingerprints. The fingerprints are useful for construction of a data base for identification of cell lines by comparison to reference profiles as well as comparison of similar lines from different sources and periodic follow-up of cells in culture.

From evolution to co-evolution – An empirical study of the role of innovation, policy and public research in industrial dynamics

In the past decades since Schumpeter’s influential writings economists have pursued research to examine the role of innovation in certain industries on firm as well as on industry level. Researchers describe innovations as the main trigger of industry dynamics, while policy makers argue that research and education are directly linked to economic growth and welfare. Thus, research and education are an important objective of public policy. Firms and public research are regarded as the main actors which are relevant for the creation of new knowledge. This knowledge is finally brought to the market through innovations. What is more, policy makers support innovations. Both actors, i.e. policy makers and researchers, agree that innovation plays a central role but researchers still neglect the role that public policy plays in the field of industrial dynamics. Therefore, the main objective of this work is to learn more about the interdependencies of innovation, policy and public research in industrial dynamics. The overarching research question of this dissertation asks whether it is possible to analyze patterns of industry evolution – from evolution to co-evolution – based on empirical studies of the role of innovation, policy and public research in industrial dynamics. This work starts with a hypothesis-based investigation of traditional approaches of industrial dynamics. Namely, the testing of a basic assumption of the core models of industrial dynamics and the analysis of the evolutionary patterns – though with an industry which is driven by public policy as example. Subsequently it moves to a more explorative approach, investigating co-evolutionary processes. The underlying questions of the research include the following: Do large firms have an advantage because of their size which is attributable to cost spreading? Do firms that plan to grow have more innovations? What role does public policy play for the evolutionary patterns of an industry? Are the same evolutionary patterns observable as those described in the ILC theories? And is it possible to observe regional co-evolutionary processes of science, innovation and industry evolution? Based on two different empirical contexts – namely the laser and the photovoltaic industry – this dissertation tries to answer these questions and combines an evolutionary approach with a co-evolutionary approach. The first chapter starts with an introduction of the topic and the fields this dissertation is based on. The second chapter provides a new test of the Cohen and Klepper (1996) model of cost spreading, which explains the relationship between innovation, firm size and R&D, at the example of the photovoltaic industry in Germany. First, it is analyzed whether the cost spreading mechanism serves as an explanation for size advantages in this industry. This is related to the assumption that the incentives to invest in R&D increase with the ex-ante output. Furthermore, it is investigated whether firms that plan to grow will have more innovative activities. The results indicate that cost spreading serves as an explanation for size advantages in this industry and, furthermore, growth plans lead to higher amount of innovative activities. What is more, the role public policy plays for industry evolution is not finally analyzed in the field of industrial dynamics. In the case of Germany, the introduction of demand inducing policy instruments stimulated market and industry growth. While this policy immediately accelerated market volume, the effect on industry evolution is more ambiguous. Thus, chapter three analyzes this relationship by considering a model of industry evolution, where demand-inducing policies will be discussed as a possible trigger of development. The findings suggest that these instruments can take the same effect as a technical advance to foster the growth of an industry and its shakeout. The fourth chapter explores the regional co-evolution of firm population size, private-sector patenting and public research in the empirical context of German laser research and manufacturing over more than 40 years from the emergence of the industry to the mid-2000s. The qualitative as well as quantitative evidence is suggestive of a co-evolutionary process of mutual interdependence rather than a unidirectional effect of public research on private-sector activities. Chapter five concludes with a summary, the contribution of this work as well as the implications and an outlook of further possible research.

Pressure-jump X-ray studies of liquid crystal transitions in lipids

In this paper, we give an overview of our studies by static and time-resolved X-ray diffraction of inverse cubic phases and phase transitions in lipids. In 1, we briefly discuss the lyotropic phase behaviour of lipids, focusing attention on non-lamellar structures, and their geometric/topological relationship to fusion processes in lipid membranes. Possible pathways for transitions between different cubic phases are also outlined. In 2, we discuss the effects of hydrostatic pressure on lipid membranes and lipid phase transitions, and describe how the parameters required to predict the pressure dependence of lipid phase transition temperatures can be conveniently measured. We review some earlier results of inverse bicontinuous cubic phases from our laboratory, showing effects such as pressure-induced formation and swelling. In 3, we describe the technique of pressure-jump synchrotron X-ray diffraction. We present results that have been obtained from the lipid system 1:2 dilauroylphosphatidylcholine/lauric acid for cubic-inverse hexagonal, cubic-cubic and lamellar-cubic transitions. The rate of transition was found to increase with the amplitude of the pressure-jump and with increasing temperature. Evidence for intermediate structures occurring transiently during the transitions was also obtained. In 4, we describe an IDL-based 'AXCESS' software package being developed in our laboratory to permit batch processing and analysis of the large X-ray datasets produced by pressure-jump synchrotron experiments. In 5, we present some recent results on the fluid lamellar-Pn3m cubic phase transition of the single-chain lipid 1-monoelaidin, which we have studied both by pressure-jump and temperature-jump X-ray diffraction. Finally, in 6, we give a few indicators of future directions of this research. We anticipate that the most useful technical advance will be the development of pressure-jump apparatus on the microsecond time-scale, which will involve the use of a stack of piezoelectric pressure actuators. The pressure-jump technique is not restricted to lipid phase transitions, but can be used to study a wide range of soft matter transitions, ranging from protein unfolding and DNA unwinding and transitions, to phase transitions in thermotropic liquid crystals, surfactants and block copolymers.

O estabelecimento virtual na sociedade técnica: a necessária busca de segurança jurídica nas transações comerciais

Pós-graduação em Direito - FCHS

Mudanças nos parâmetros técnicos dos projetos de crédito rural: o caso dos projetos de assentamentos no sudeste do Pará

O presente trabalho tem o caráter de estudar as mudanças ocorridas nos parâmetros técnicos, durante o período compreendido entre 1994 a 2004. Este período foi analisado em dois momentos distintos: o primeiro entre os anos de 1994 a 1999, que coincide com a predominância da EMATER na elaboração dos projetos e, o segundo a partir de 2000, com a maior participação das prestadoras de serviço na elaboração de projetos para agricultores familiares assentados. Este segundo momento coincide com a participação das prestadoras de serviço do Projeto Lumiar. A análise privilegia o segundo momento de mudanças nos parâmetros técnicos, que envolveu a participação dos agricultores familiares e de diversas instituições vinculadas ao crédito rural para assentamentos. As discussões sobre os projetos foram realizadas nos fóruns de discussão técnica (seminários e reuniões ou oficinas) promovidos pela câmara técnica. Através da melhoria no diálogo entre os atores nos fóruns de discussão técnica, a construção dos parâmetros técnicos no Sudeste do Pará vem proporcionando uma melhoria na aplicação do crédito, apesar de faltar uma análise mais sistematizada sobre a adaptação dos projetos, nos estabelecimentos agrícolas. A ausência de índices técnicos regionais pode colocar em risco alguns projetos, como o financiamento do PRONAF Florestal. O principal avanço técnico nas discussões do crédito para a agricultura familiar foi a incorporação das atividades de pequenos e médios animais e dos sistemas agroforestry (SAF’s), como itens financiáveis que permitiu uma maior adaptabilidade do crédito a realidade dos agricultores familiares.

The impact of mechanical compression on cortical microtubules in Arabidopsis: a quantitative pipeline

Exogenous mechanical perturbations on living tissues are commonly used to investigate whether cell effectors can respond to mechanical cues. However, in most of these experiments, the applied mechanical stress and/or the biological response are described only qualitatively. We developed a quantitative pipeline based on microindentation and image analysis to investigate the impact of a controlled and prolonged compression on microtubule behaviour in the Arabidopsis shoot apical meristem, using microtubule fluorescent marker lines. We found that a compressive stress, in the order of magnitude of turgor pressure, induced apparent microtubule bundling. Importantly, that response could be reversed several hours after the release of compression. Next, we tested the contribution of microtubule severing to compression-induced bundling: microtubule bundling seemed less pronounced in the katanin mutant, in which microtubule severing is dramatically reduced. Conversely, some microtubule bundles could still be observed 16 hours after the release of compression in the spiral2 mutant, in which severing rate is instead increased. To quantify the impact of mechanical stress on anisotropy and orientation of microtubule arrays, we used the nematic tensor based FibrilTool ImageJ/Fiji plugin. To assess the degree of apparent bundling of the network, we developed several methods, some of which were borrowed from geostatistics. The final microtubule bundling response could notably be related to tissue growth velocity that was recorded by the indenter during compression. Because both input and output are quantified, this pipeline is an initial step towards correlating more precisely the cytoskeleton response to mechanical stress in living tissues.