The impact of teaching models, group structures and assessment modes on cooperative learning in the student design studio

As a result of ever diminishing teaching resources, an increasing number of architectural educators are setting group design projects, rather then spreading their time thinly over a large number of individual projects. This allows them to co-ordinate longer and more in-depth review sessions on a smaller number of assignment submissions. However, while the group
model may offer an authentic learning model by reflecting design in practice, the approach is not without its obvious shortcomings as a teaching archetype for the assessment of the knowledge and skill competencies of individual students. Hence, what is clear is the need for a readily adoptable andragogy for the teaching and assessment of group design projects.
The following paper describes the background, methodology and findings of a Strategic Teaching and Learning Grant funded research project carried out in the year 2005 at the School of Architecture and Building at Deakin University. The project aimed to inform a change of classroom/studio practice governing the assemblage, teaching and assessment of student design teams. The development through these changes of cooperative and student centred learning principles focused on effective design collaboration and fair assessment should, it will be argued, lead to an enhanced group-learning experience in studio, which will subsequently and ultimately enhance professional practice.

Nurses driving change to improve access to education and quality in lcinical teaching : A partnership between Australia and Viet Nam

In Viet Nam, standards of nursing care fail to meet international competency standards. This increases risks to patient safety (eg. hospital acquired infection), consequently the Ministry of Health identified the need to strengthen nurse education in Viet Nam. This paper presents experiences of a piloted clinical teaching model developed in Ha Noi, to strengthen nurse led institutional capacity for in-service education and clinical teaching. Historically 90% of nursing education was conducted by physicians and professional development in hospitals for nurses was limited. There was minimal communication between hospitals and nursing schools about expectations of students and assessment and quality of the learning experience. As a result when students came to the clinical sites, no-one understood how to plan their learning objectives and utilise teaching and learning approaches appropriate to their level. Therefore student learning outcomes were variable. They focussed on procedures and techniques and “learning how to do” rather than learning how to plan, implement and evaluate patient care. This project is part of a multi-component capacity building program designed to improve nurse education in Viet Nam. The project was funded jointly by Queensland University of Technology (QUT) and the Australian Agency for International Development. Its aim was to develop a collaborative clinically-based model of teaching to create an environment that encourages evidence-based, student-centred clinical learning. Accordingly, strategies introduced promoted clinical teaching of competency based nursing practice utilising the regionally endorsed nurse core competency standards. Thirty nurse teachers from Viet Duc University Hospital and Hanoi Medical College participated in the program. These nurses and nurse teachers undertook face to face education in three workshops, and completed three assessment items. Assessment was applied, where participants integrated the concepts learned in each workshop and completed assessment tasks related to planning, implementing and evaluating teaching in the clinical area. Twenty of these participants were then selected to undertake a two week study tour in Brisbane, Australia where the clinical teaching model was refined and an action plan developed to integrate into both organisations with possible implementation across Viet Nam. Participants on this study tour also experienced clinical teaching and learning at QUT by attending classes held at the university, and were able to visit selected hospitals to experience clinical teaching in these settings as well. Effectiveness of the project was measured throughout the implementation phase and in follow up visits to the clinical site. To date changes have been noted on an individual and organisational level. There is also significant planning underway to incorporate the clinical teaching model developed across the organisation and how this may be implemented in other regions. Two participants have also been involved in disseminating aspects of this approach to clinical teaching in Ho Chi Minh, with further plans for more in-depth dissemination to occur throughout the country.

Improving access to quality clinical nurse teaching : a partnership between Australia and Vietnam

Until recently, standards to guide nursing education and practice in Vietnam were nonexistent. This paper describes the development and implementation of a clinical teaching capacity building project piloted in Hanoi, Vietnam. The project was part of a multi-component capacity building program designed to improve nurse education in Vietnam. Objectives of the project were to develop a collaborative clinically-based teaching model that encourages evidence-based, student-centred clinical learning. The model incorporated strategies to promote development of nursing practice to meet national competency standards. Thirty nurse teachers from two organisations in Hanoi participated in the program. These participants attended three workshops, and completed applied assessments, where participants implemented concepts from each workshop. The assessment tasks were planning, implementing and evaluating clinical teaching. On completion of the workshops, twenty participants undertook a study tour in Australia to refine the teaching model and develop an action plan for model implementation in both organisations, with an aim to disseminate the model across Vietnam. Significant changes accredited to this project have been noted on an individual and organisational level. Dissemination of this clinical teaching model has commenced in Ho Chi Minh, with further plans for more in-depth dissemination to occur throughout the country.

Teaching and learning online : older adults in a community setting

This research was designed to assess whether the older adult learning in IT environments and online represents a different pedagogy from that of younger learners, as has been suggested by some authors in the literature. The study was conducted in a community learning and employment centre in an Australian rural town, and involved interviews with six teachers of older adults, and nine older learners. The results did not support the need for a particular pedagogy for older learners, instead supporting an approach to teaching that was based around teachers identifying learner characteristics and needs and responding to them as individuals. This finding has been interpreted in the context of already published iterative and interactive teaching models, and has considerable implications for the effective teaching and learning of older adults. Those implications are discussed in the paper.

Why models are advantageous to learning science

Models are used routinely in science classes to help explain scientific concepts; however, students are often unaware of the role, limitations and purpose of the particular model being used. This study investigated Grade 8-11 students’ views on models in science and used these results to propose a framework to show how models are involved in learning. The results show that students’ understanding of the role of models in learning science improved in later grades and that many students were able to distinguish the purpose of scientific models from teaching models. The results are used to identify the criteria students use to classify models and to support pedagogical approaches of using models in teaching science.

Scoping work integrated learning purposes, practices and issues

A range of terms is used in Australian higher education institutions to describe learning approaches and teaching models that provide students with opportunities to engage in learning connected to the world of work. The umbrella term currently being used widely is Work Integrated Learning (WIL). The common aim of approaches captured under the term WIL is to integrate discipline specific knowledge learnt in university setting with that learnt in the practice of work through purposefully designed curriculum. In endeavours to extend WIL opportunities for students, universities are currently exploring authentic learning experiences, both within and outside of university settings. Some universities describe these approaches as ‘real world learning’ or ‘professional learning’. Others refer to ‘social engagement’ with the community and focus on building social capital and citizenship through curriculum design that enables students to engage with the professions through a range of learning experiences. This chapter discusses the context for, the scope, purposes, characteristics and effectiveness of WIL across Australian universities as derived from a national scoping study. This study, undertaken in response to a high level of interest in WIL, involved data collection from academic and professional staff, and students at nearly all Australian universities. Participants in the study consistently reported the benefits, especially in relation to the student learning experience. Responses highlight the importance of strong partnerships between stakeholders to facilitate effective learning outcomes and a range of issues that shape the quality of approaches and models being adopted, in promoting professional learning.

'Going live' : establishing the creative attributes of the live multi-camera television professional

In my capacity as a television professional and teacher specialising in multi-camera live television production for over 40 years, I was drawn to the conclusion that opaque or inadequately formed understandings of how creativity applies to the field of live television, have impeded the development of pedagogies suitable to the teaching of live television in universities. In the pursuit of this hypothesis, the thesis shows that television degrees were born out of film studies degrees, where intellectual creativity was aligned to single camera production, and the 'creative roles' of producers, directors and scriptwriters. At the same time, multi-camera live television production was subsumed under the 'mass communication' banner, leading to an understanding that roles other than producer and director are simply technical, and bereft of creative intent or acumen. The thesis goes on to show that this attitude to other television production personnel, for example, the vision mixer, videotape operator and camera operator, relegates their roles to that of 'button pusher'. This has resulted in university teaching models with inappropriate resources and unsuitable teaching practices. As a result, the industry is struggling to find people with the skills to fill the demands of the multi-camera live television sector. In specific terms the central hypothesis is pursued through the following sequenced approach. Firstly, the thesis sets out to outline the problems, and traces the origins of the misconceptions that hold with the notion that intellectual creativity does not exist in live multi-camera television. Secondly, this more adequately conceptualised rendition, of the origins particular to the misconceptions of live television and creativity, is then anchored to the field of examination by presentation of the foundations of the roles involved in making live television programs, using multicamera production techniques. Thirdly, this more nuanced rendition of the field sets the stage for a thorough analysis of education and training in the industry, and teaching models at Australian universities. The findings clearly establish that the pedagogical models are aimed at single camera production, a position that deemphasises the creative aspects of multi-camera live television production. Informed by an examination of theories of learning, qualitative interviews, professional reflective practice and observations, the roles of four multi-camera live production crewmembers (camera operator, vision mixer, EVS/videotape operator and director's assistant), demonstrate the existence of intellectual creativity during live production. Finally, supported by the theories of learning, and the development and explication of a successful teaching model, a new approach to teaching students how to work in live television is proposed and substantiated.

Exploiting Web 2.0 technologies to forge live connectedness in class

The economics of supporting learning has seen institutional encouragement of a wide range of blended learning initiatives in face to face and online teaching and learning. This has become one of the key drivers for the adoption of technology in teaching, in a manner occassionally guilty of putting the cart before the horse. Learning spaces are increasingly equipped with a dizzying array of technological options testifying to institutional and governmental investment and commitment in supporting face to face blended learning (QUT, 2011, C/4.2). Yet innovation within traditional learning and teaching models faces a number of challenges both at an institutional level and at the teaching coal face. Web 2.0 technologies present a vast array of opportunities to harness and capture the attention of students in engaging learning opportunitites. This presentation will explore technologies supportive of active learning pedagogies.

Elearning.ul.pt : uma plataforma de e-learning no ensino superior nacional

Relatório de estágio de mestrado, Educação (Tecnologias de Informação, Comunicação e Educação), Universidade de Lisboa, Instituto de Educação, 2011

Geometria e perspectiva no ensino da Arquitectura : proposta de um exercício didático e transversal

Os anexos não se encontram disponíveis em formato digital, apenas poderão ser consultados na biblioteca da FBAUL : COTA TES 881

Relatório de estágio: mestrado em ensino da música

Resumo I (Prática Pedagógica)- Este Relatório de Estágio é composto por duas secções. Na primeira descreve-se o estágio realizado pela mestranda, na Classe de Flauta do Professor João Pereira Coutinho (JPC), na Escola de Música do Conservatório Nacional (EMCN), ao longo do ano lectivo de 2012/2013, com a supervisão do Professor Nuno Ivo Cruz. Após uma contextualização da EMCN e dos alunos acompanhados no estágio, descreve-se o desempenho de cada um deles, ao longo do ano lectivo, bem como as práticas educativas desenvolvidas pelo Professor Cooperante, nas aulas assistidas, e as desenvolvidas pela estagiária. Realiza-se uma reflexão sobre as mesmas,apresentando, também, algumas vantagens e desvantagens relativamente ao modelo de Estágio proposto.

Inclusão no Jardim de Infância : porta para o sucesso da inclusão no 1º ciclo

Este trabalho desenvolve-se no âmbito do mestrado em educação especial, domí-nio cognitivo e motor. Trata-se de um projeto de intervenção emergente do trabalho diário como educadora de infância, num agrupamento vertical de escolas que segue um modelo inclusivo. O projeto centrou-se numa aluna do pré-escolar em vias de ingressar no 1º ciclo e nas estratégias e atividades envolvidas na preparação e sucesso desse ingresso. Nesse sentido tornou-se necessário pesquisar sobre a problemática específica da aluna, sobre práticas inclusivas e sobre métodos e metodologias de intervenção. Isto é, investigou-se sobre paralisia cerebral, escola inclusiva, no modo como se podem articular estas duas questões, sobre pedagogia diferenciada e diferenciação pedagógica e ainda sobre as linhas de orientação para o pré-escolar e sobre as metas a atingir no fim desse ciclo. Desenvolveu-se um processo em que se utilizaram os procedimentos da investiga-ção/ação através de vários instrumentos (pesquisa documental, entrevista, testes sociomé-tricos e observação naturalista) a partir dos quais se elaborou um projeto que foi posto em prática ao longo do ano letivo de 2010/2011. Pode constatar-se no fim da intervenção que os resultados foram positivos, pois permitiram à aluna alcançar os objetivos inicialmente previstos, atingindo as metas da edu-cação pré-escolar e ingressar no 1º ciclo. Foram surgindo novas questões, entre elas a necessidade de promover de forma mais intensa a participação da família e a continuidade do trabalho desenvolvido após uma mudança de ciclo, e portanto, do grupo e dos professores.

The academic acclimatisation difficulties of international students of the built environment

Teaching models common to Australasia can be antithetical to those of its Asian neighbours. Australasian andragogy is a bottom-up student-centred mode of knowledge transmission promoting extroverted learning styles, whilst in Asia andragogy is commonly a top-down teacher centred model promoting introspective learning. Yet these teaching styles are in opposition to the cultural-systems attributed to Asia and the West. Such socio-cultural differences are recognised in this research as contributing to the difficulties international Built Environment undergraduates experience when asked to learn in multi-disciplinary collaborative teams. This paper presents the initial stages of a study currently running as a reflexive research program aimed at resolving these learning difficulties. The primary aim of this program is to inform a new culturally inclusive andragogy for design teaching. The outcome of the research questions are addressed through a triangulated analysis including: the formative appraisal of student satisfaction through questionnaires; the summative evaluation of student achievement through the analysis of grades and the assessment of knowledge and skills gained through the measure of student design projects; and illuminative evaluation through focus group discussions and the observation of tutorials.

The academic acclimatisation difficulties of international students of the built environment

Teaching models common to Australasia can be antithetical to those of its Asian neighbours. Australasian andragogy is a bottom-up student-centred mode of knowledge transmission promoting extroverted learning styles, whilst in Asia andragogy is commonly a top-down teachercentred model promoting introspective learning. Yet these teaching styles are in opposition to the cultural-systems attributed to Asia and the West. Such socio-cultural differences are recognised in this research as contributing to the difficulties international Built Environment undergraduates experience when asked to learn in multi-disciplinary collaborative teams. This paper presents the initial stages of a study currently running as a reflexive research program aimed at resolving these learning difficulties. The primary aim of this program is to inform a new culturally inclusive andragogy for design teaching. The outcome of the research questions are addressed through a triangulated analysis including: the formative appraisal of student satisfaction through questionnaires; the summative evaluation of student achievement through the analysis of grades and the assessment of knowledge and skills gained through the measure of student design projects; and illuminative evaluation through focus group discussions and the observation of tutorials.

Students

The purpose of this paper was to investigate students' views on models and modelling in science as well as the role that models play in learning, using a theoretical framework of models in learning. Students' views on models in science were investigated using a pencil-and-paper questionnaire given to 275 students from Grade 8 (13 years old) to first-year university students, which enabled both forced choice and an open response. The results provided evidence, improving with increased years of schooling, that many students have a good understanding of the role of models in the process of science, appreciating the representational nature of models, the multiplicity of models and the changing nature of models. However, in contrast to previous studies, many students were also aware of the role of models in their learning of science. While some students had a fascination for true facts and single and correct models, others exhibited more sophisticated epistemologies of science. Mostly students' comments revealed developing understandings of the process of science. Scientific models were associated with students' understanding of the role of scientific models in the process of science and teaching models were more commonly associated with students' understanding of the role of models in the process of learning.