Sustainable Building Materials in Kerala – An Overview

Kerala, God’s own country is blessed with immense natural resources. It’s high time that the state’s natural resources being utilized effectively. While sustainable development is the need of the hour, we have to take lead in initiating activities that would minimize the exploitation of our natural resources resulting in their effective utilization. This paper narrates an overview of innovative building materials especially using natural fibres available in Kerala and discusses the feasibility of utilising such fibres in the context of sustainable building materials in Kerala. The paper also discusses how these materials can be effectively utilized to reduce the huge investment in the construction industry

Effect of stalk and leaf extracts from Euphorbiaceae species on Aedes aegypti (Diptera, Culicidae) larvae

The objective of this study was to evaluate the larvicidal activity of essential oil aqueous solutions (hydrolates) obtained by steam distillation of stalks and leaves of Croton argyrophylloides, Croton nepetaefolius, Croton sonderianus and Croton zehntneri against Aedes aegypti larvae. Twenty-five larvae of third instar were placed in plastic beckers, containing the hydrolates (50 mL), in a four repetitions scheme. Water was used as control and the number of dead larvae was counted after 24 hours. The data obtained were submitted to Variance Analysis and Tukey test. Significant differences were observed among the hydrolates from different species and from different parts of each plant (p < 0.001). The hydrolates of stalk and leaf from C. nepetaefolius and C. zehntneri and leaf hydrolate of C. argyrophylloides presented 100% mortality against larvae. The compounds present in C. zenhtneri and C. nepetaefolius are oxygenated phenylpropanoids that are more soluble in water than the monoterpenes and sesquiterpenes detected in the oils of C. argyrophylloides and C. sonderianus. This study showed that all species analyzed presented compounds with larvicidal properties, with differences between each plant parts.

Management of corn stalk waste as reinforcement for polypropylene injection moulded composites

The main objective of this study was the management of corn stalk waste as reinforcement for polypropylene (PP) injection moulded composites as an alternative to wood flour and fibers. In the first step, corn stalk waste was subjected to various treatments, and four different corn stalk derivatives (flour and fibers) able to be used as reinforcement of composite materials were prepared and characterized. These derivatives are corn stalk flour, thermo-mechanical, semi-chemical, and chemical fibers. They were characterized in terms of their yield, lignin content, Kappa number, fiber length/diameter ratio, fines, coarseness, viscosity, and the length at the break of a standard sheet of paper. Results showed that the corn stalk derivatives have different physico-chemical properties. In the second step, the prepared flour and fibers were explored as a reinforcing element for PP composites. Coupled and non-coupled PP composites were prepared and tested for tensile properties. For overall trend, with the addition of a coupling agent, tensile properties of composites significantly improved, as compared with non-coupled samples. In addition, a morphological study revealed the positive effect of the coupling agent on the interfacial bonding. The composites prepared with semichemical fiber gave better results in comparison with the rest of the corn stalk derivatives due to its chemical characteristics

Axima nordestina (Hymenoptera, Eurytomidae), a new stalk-eyed wasp from Brazilian savannah

A new stalk-eyed wasp Axima nordestina sp. n. is described from the Northeastern Brazilian savannah. Axima nordestina is the fourth species of stalk-eyed wasps (A. noyesi species group) and the second one known from Brazil. The head morphology of A. nordestina appears less derived than in the other known species. An updated key of the A. noyesi species group is provided.

An essential role for the stalk region of CD8 beta in the coreceptor function of CD8.

The CD8alphabeta heterodimer is integral to the selection of the class I-restricted lineage in the thymus; however, the contribution of the CD8beta chain to coreceptor function is poorly understood. To understand whether the CD8beta membrane proximal stalk region played a role in coreceptor function, we substituted it with the corresponding sequence from the CD8alpha polypeptide and expressed the hybrid molecule in transgenic mice in place of endogenous CD8beta. Although the stalk-swapped CD8beta was expressed on the cell surface as a disulfide-bonded heterodimer at equivalent levels of expression to an endogenous CD8beta molecule, it failed to restore selection of CD8(+) class I MHC-restricted T cells and it altered the response of peripheral T cells. Thus, the stalk region of the CD8beta polypeptide has an essential role in ensuring functionality of the CD8alphabeta heterodimer and its replacement compromises the interaction of CD8 with peptide-MHC complexes.

Stalk and sucrose yield in response to nitrogen fertilization of sugarcane under reduced tillage

The objective of this work was to evaluate the agroindustrial production of sugarcane (millable stalks and sucrose yield) after successive nitrogen fertilizations of plant cane and ratoons in a reduced tillage system. The experiment was carried out at Jaboticabal, SP, Brazil, on a Rhodic Eutrustox soil, during four consecutive crop cycles (March 2005 to July 2009). Plant cane treatments consisted of N-urea levels (control, 40, 80, and 120 kg ha-1 N + 120 kg ha-1 P2O5 and K2O in furrow application). In the first and second ratoons, the plant cane plots were subdivided in N-ammonium nitrate treatments (control, 50, 100, and 150 kg ha-1 N + 150 kg ha-1 K2O as top dressing over rows). In the third ratoon, N fertilization was leveled to 100 kg ha-1 in all plots, including controls, to detect residual effects of previous fertilizations on the last crop's cycle. Sugarcane ratoon was mechanically harvested. A weighing truck was used to evaluate stalk yield (TCH), and samples were collected in the field for analysis of sugar content (TSH). Increasing N doses and meteorological conditions promote significant responses in TCH and TSH in cane plant and ratoons, in the average and accumulated yield of the consecutive crop cycles.

Nymphicidal effect of vegetal extracts of Annona mucosa and Anonna crassiflora (Magnoliales, Annonaceae) against rice stalk stink bug, Tibraca limbativentris (Hemiptera, Pentatomidae)

This study aimed to verify the chloroform-methanol nymphicidal action of extracts of Annona mucosa leaves and seeds and of A. crassiflora seeds on second instar nymphs of rice stalk stink bug, Tibraca limbativentris. For each extract the concentrations of 0.5%, 1.0%, 2.0%, 4.0%, 8.0%, and two control treatments (water and Tween80®) were used. The results show that the seed extracts of A. mucosa and A. crassiflora have insecticidal activity against the T. limbativentris nymphs with statistical significance for all concentrations when compared with controls. The seed extract of A. mucosa showed the higher toxicity with greater than 75% mortality at a concentration of 1.0% in the first 24 h after application. The leaf extract of A. mucosa presented the lowest toxicity with no more than 40% mortality. The seed extract of A. crassiflora showed intermediate toxicity among all the tested extracts, and the nymph's mortality exceeded 80% for the highest concentration after 120 h of application. Considering these results, we were able to observe that the seeds extract of A. mucosa may be an alternative for the control of bed bug nymphs T. limbatriventris, especially for small producers.

Determination of corn stalk fibers' strength through modeling of the mechanical properties of its composites

Worldwide cultivation of corn is expanding, due in part to the increasing production of bioethanol. In consequence, huge amounts of corn stalks residues are been produced. Instead of incineration, we transformed the corn stalks into a semichemical pulp and successfully applied it as reinforcement in polypropylene composites. PP composites reinforced with 40% wt corn stalk single fibers were prepared, and their mechanical properties were evaluated. Through mechanical properties modeling of the composites, the intrinsic tensile strength of the cellulosic fibers that constitute the corn stalk have been determined

Simulation and optimization of IGCC technique for power generation and hydrogen production by using lignite Thar coal and cotton stalk

The purpose of this study was to simulate and to optimize integrated gasification for combine cycle (IGCC) for power generation and hydrogen (H2) production by using low grade Thar lignite coal and cotton stalk. Lignite coal is abundant of moisture and ash content, the idea of addition of cotton stalk is to increase the mass of combustible material per mass of feed use for the process, to reduce the consumption of coal and to increase the cotton stalk efficiently for IGCC process. Aspen plus software is used to simulate the process with different mass ratios of coal to cotton stalk and for optimization: process efficiencies, net power generation and H2 production etc. are considered while environmental hazard emissions are optimized to acceptance level. With the addition of cotton stalk in feed, process efficiencies started to decline along with the net power production. But for H2 production, it gave positive result at start but after 40% cotton stalk addition, H2 production also started to decline. It also affects negatively on environmental hazard emissions and mass of emissions/ net power production increases linearly with the addition of cotton stalk in feed mixture. In summation with the addition of cotton stalk, overall affects seemed to negative. But the effect is more negative after 40% cotton stalk addition so it is concluded that to get maximum process efficiencies and high production less amount of cotton stalk addition in feed is preferable and the maximum level of addition is estimated to 40%. Gasification temperature should keep lower around 1140 °C and prefer technique for studied feed in IGCC is fluidized bed (ash in dry form) rather than ash slagging gasifier

Ionomer Compatibilized Low Density Polyethylene - Tapioca Starch Blends Biodegradability and Photodegradability

Biodegradation is the chemical degradation of materials brought about by the action of naturally occurring microorganisms. Biodegradation is a relatively rapid process under suitable conditions of moisture, temperature and oxygen availability. The logic behind blending biopolymers such as starch with inert polymers like polyethylene is that if the biopolymer component is present in sufficient amount, and if it is removed by microorganisms in the waste disposal environment, then the base inert plastic should slowly degrade and disappear. The present work focuses on the preparation of biodegradable and photodegradable blends based on low density polyethylene incorporating small quantities of ionomers as compatibilizers. The thesis consists of eight chapters. The first chapter presents an introduction to the present research work and literature survey. The details of the materials used and the experimental procedures undertaken for the study are described in the second chapter. Preparation and characterization of low density polyethylene (LDPE)-biopolymer (starch/dextrin) blends are described in the third chapter. The result of investigations on the effect of polyethylene-co-methacrylic acid ionomers on the compatibility of LDPE and starch are reported in chapter 4. Chapter 5 has been divided into two parts. The first part deals with the effect of metal oxides on the photodegradation of LDPE. The second part describes the function of metal stearates on the photodegradation of LDPE. The results of the investigations on the role of various metal oxides as pro-oxidants on the degradation of ionomer compatibilized LDPE-starch blends are reported in chapter 6. Chapter 7 deals with the results of investigations on the role of various metal stearates as pro-oxidants on the degradation of ionomer compatibilized LDPE-starch blends. The conclusion of the investigations is presented in the last chapter of the thesis.

Caracterização de farinhas de tapioca produzidas no estado do Pará

A farinha de tapioca é um alimento produzido artesanalmente a partir da fécula de mandioca (Manihot esculenta Crantz), amplamente consumida na Região Amazônica. O objetivo deste trabalho foi caracterizar duas farinhas de tapioca produzidas no estado do Pará: uma no Baixo Amazonas e outra na Zona Bragantina. As duas farinhas apresentaram perfis granulométricos distintos e diferença significativa (P0,05) para a maioria dos parâmetros físicoquímicos e tecnológicos analisados. A farinha de tapioca proveniente do Baixo Amazonas apresentou maior umidade (10,7%), em função da maior capacidade de adsorver água, devido a sua maior área específica (menor granulometria). A microscopia óptica com luz polarizada, juntamente com as características dos dois produtos indicou a inexistência de um processo padrão utilizado na produção da farinha de tapioca.

Põe tapioca, põe farinha d’água?: gastronomia do açaí e identidade socioespacial e cultural na Grande Belém

O presente trabalho teve como objetivo principal analisar as mudanças nas formas de venda e consumo do açaí na Região Metropolitana de Belém (RMB), e sua relação com a identidade de lugar de seus consumidores. O interesse pelo tema teve origem na observação da ocorrência da globalização do açaí, alimento base da dieta das populações amazônicas de origem ribeirinha que hoje é largamente consumido fora da Região Amazônica, em padrões muito diferentes daqueles nela estabelecidos. A escolha da RMB como lócus de pesquisa se justifica pelo fato de que nela se concentra alto consumo de açaí, nos padrões tradicionais e nos modernos, suscitando questionamentos sobre os efeitos dessa convivência na vida cotidiana dos que a habitam. Teoricamente, a pesquisa articula a definição de identidade de lugar de Abe-Lima (2012) com as elaborações de Henri Lefèbvre (1991) sobre a vida cotidiana no mundo moderno e com teoria dos circuitos econômicos de Milton Santos (2008). Metodologicamente, foi adotada uma estratégia multimétodos, envolvendo pesquisa documental, um painel de especialistas com 5 entidades de acompanhamento da produção de açaí, observações pautadas na etnografia urbana em 9 locais de venda e entrevistas semiabertas com 40 consumidores de açaí, maiores de 18 anos e residentes na RMB, recrutados por meio de cadeia tipo bola de neve. Além dos roteiros de entrevistas, foram utilizados como estratégias de coleta de dados diários de campo e fotografias. O conjunto dos dados foi submetido à técnica da análise de conteúdo temática, com eventual apoio do software QDA Miner Lite. Os resultados situaram a globalização do açaí em meados da década de 1990, momento de intensificação dos efeitos da metropolização em Belém, como o aumento populacional, a segregação espacial e a imposição de um ritmo de vida mais acelerado. As análises apontaram que tal processo significou a entrada do açaí no circuito superior da economia, com um processo produtivo mais organizado, utilizando mais tecnologia e envolvendo maiores volumes financeiros, atingindo escala industrial. No entanto, prevalece na RMB o processamento artesanal, em estruturas de pequeno porte, construídas em alvenaria, de organização simples e controle financeiro ausente. O consumo público aumentou, com grande número de locais especializados na oferta de açaí, em caráter de entretenimento, sendo incipiente a adesão a novos acompanhamentos, como granola e aveia. A preferência pelos acompanhamentos tradicionais, como farinha d’água ou de tapioca, açúcar e peixe, permanece, assim como pelo consumo privado, no âmbito da casa, que tem sido favorecido pela disponibilidade do serviço de entrega, recurso recente. A frequência geral de consumo diminuiu, em função do aumento de preço e de mudanças na rotina, como aumento da distância entre local de trabalho e residência. A pesquisa permitiu reafirmar a importância do açaí na vida cotidiana dos belenenses que o consomem, para os quais ele funciona como elemento de distintividade, continuidade, autoestima e autoeficácia, em estreita relação com aspectos próprios da metrópole. Por esse motivo, torna-se preocupante que o acesso a açaí de qualidade, nos padrões desejados pelos indivíduos, esteja tornando-SE privilégio inacessível aos consumidores de menor poder aquisitivo. Assim, espera-se que o conjunto de dados contribua para a compreensão da importância de políticas públicas voltadas ao açaí que considerem melhor as demandas daqueles que o consomem.

The effect of power-ultrasound on the pretreatment of acidified aqueous solutions of banana flower-stalk: Structural, chemical and statistical analysis

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)