Stress based prediction of formability and failure in incremental sheet forming

A strain-based forming limit criterion is widely used in sheet-metal forming industry to predict necking. However, this criterion is usually valid when the strain path is linear throughout the deformation process [1]. Strain path in incremental sheet forming is often found to be severely nonlinear throughout the deformation history. Therefore, the practice of using a strain-based forming limit criterion often leads to erroneous assessments of formability and failure prediction. On the other hands, stress-based forming limit is insensitive against any changes in the strain path and hence it is first used to model the necking limit in incremental sheet forming. The stress-based forming limit is also combined with the fracture limit based on maximum shear stress criterion to show necking and fracture together. A derivation for a general mapping method from strain-based FLC to stress-based FLC using a non-quadratic yield function has been made. Simulation model is evaluated for a single point incremental forming using AA 6022-T43, and checked the accuracy against experiments. By using the path-independent necking and fracture limits, it is able to explain the deformation mechanism successfully in incremental sheet forming. The proposed model has given a good scientific basis for the development of ISF under nonlinear strain path and its usability over conventional sheet forming process as well.

Surface-stress-based microcantilever aptasensor

This thesis presents the design, modelling, fabrication, and biological evaluation of a microcantilever-based aptasensor. It is the first reported work on aptasensors with aptamer immobilized on a bare SU-8 surface. Aptasensor surface funtionalisation was achieved using gas plasma treatment. Label-free detection of thrombin molecules using the aptasensor was successfully demonstrated.

A surface-stress-based microcantilever aptasensor

Biosensors based on microcantilevers convert biological recognition events into measurable mechanical displacements. They offer advantages such as small size, low sample volume, label-free detection, ease of integration, high-throughput analysis, and low development cost. The design and development of a microcantilever-based aptasensor employing SU-8 polymer as the fabrication material is presented in this paper. Aptamers are employed as bioreceptor elements because they exhibit superior specificity compared to antibodies due to their small size and physicochemical stability. To immobilise thrombin DNA aptamer on the bare SU-8 surface of the aptasensor, a combined plasma mode treatment method is implemented which modifies the surface of the aptasensor. Label-free detection of thrombin molecules using the fabricated aptasensor is successfully demonstrated. The measured deflection is one order of magnitude higher than that of a silicon nitride microcantilever biosensor. The developed aptasensor also demonstrates high specificity.

A surface-stress-based microcantilever aptasensor

Biosensors based on microcantilevers convert biological recognition events into measurable mechanical displacements. They offer advantages such as small size, low sample volume, label-free detection, ease of integration, high-throughput analysis, and low development cost. The design and development of a microcantilever-based aptasensor employing SU-8 polymer as the fabrication material is presented in this paper. Aptamers are employed as bioreceptor elements because they exhibit superior specificity compared to antibodies due to their small size and physicochemical stability. To immobilise thrombin DNA aptamer on the bare SU-8 surface of the aptasensor, a combined plasma mode treatment method is implemented which modifies the surface of the aptasensor. Label-free detection of thrombin molecules using the fabricated aptasensor is successfully demonstrated. The measured deflection is one order of magnitude higher than that of a silicon nitride microcantilever biosensor. The developed aptasensor also demonstrates high specificity.

Stress-based predictions of formability and failure in incremental sheet forming

 This research investigates the deformation mechanism in incremental sheet forming (ISF) with relation to necking and failure. A strain-based forming limit criterion is widely used in sheet-metal forming industry to predict necking. However, this criterion is strictly valid only when the strain path is linear throughout the deformation process. Where the strain path in ISF is often found to be severely nonlinear throughout the deformation history. Therefore, the practice of using a strain-based forming limit criterion often leads to erroneous assessments of formability and failure prediction. On the other hands, stress-based forming limit is insensitive against any changes in the strain path and hence it is used to model the necking and fracture limits. Simulation model is evaluated for a single point incremental forming using AA 6022-T4E32 and checked the accuracy against experiments.

OXIDATIVE STRESS BASED STRATEGIES FOR ENHANCING THE EFFICACY OF HISTONE DEACETYLASE INHIBITORS (HDACi)

Histone deacetylase inhibitors (HDACi) are anti-cancer drugs that primarily act upon acetylation of histones, however they also increase levels of intracellular reactive oxygen species (ROS). We hypothesized that agents that cause oxidative stress might enhance the efficacy of HDACi. To test this hypothesis, we treated acute lymphocytic leukemia cells (ALL) with HDACi and adaphostin (ROS generating agent). The combination of two different HDACi (vorinostat or entinostat) with adaphostin synergistically induced apoptosis in ALL. This synergistic effect was blocked when cells were pre-treated with the caspase-9 inhibitor, LEHD. In addition, we showed that loss of the mitochondrial membrane potential is the earliest event observed starting at 12 h. Following this event, we observed increased levels of superoxide at 16 h, and ultimately caspase-3 activation. Pre-treatment with the antioxidant N-acetylcysteine (NAC) blocked ROS generation and reversed the loss of mitochondrial membrane potential for both combinations. Interestingly, DNA fragmentation and caspase-3 activity was only blocked by NAC in cells treated with vorinostat-adaphostin; but not with entinostat-adaphostin. These results suggest that different redox mechanisms are involved in the induction of ROS-mediated apoptosis. To further understand these events, we studied the role of the antioxidants glutathione (GSH) and thioredoxin (Trx). We found that the combination of entinostat-adaphostin induced acetylation of the antioxidant thioredoxin (Trx) and decreased intracellular levels of GSH. However, no effect on Trx activity was observed in either combination. In addition, pre-treatment with GSH ethyl ester, a soluble form of GSH, did not block DNA fragmentation. Together these results suggested that GSH and Trx are not major players in the induction of oxidative stress. Array data examining the expression of genes involved in oxidative stress demonstrated a differential regulation between cells treated with vorinostat-adaphostin and entinostat-adaphostin. Some of the genes differentially expressed between the combinations include aldehyde oxidase 1, glutathione peroxidase-5, -6, peroxiredoxin 6 and myeloperoxidase. Taken together, these experimental results indicate that the synergistic activity of two different HDACi with adaphostin is mediated by distinct redox mechanisms in ALL cells. Understanding the mechanism involved in these combinations will advance scientific knowledge of how the action of HDACi could be augmented in leukemia models. Moreover, this information could be used for the development of effective clinical trials combining HDACi with other anticancer agents.

Design, implementation and evaluation of an unconstrained and contactless biometric system based on hand geometry and stress detection

Esta tesis propone un sistema biométrico de geometría de mano orientado a entornos sin contacto junto con un sistema de detección de estrés capaz de decir qué grado de estrés tiene una determinada persona en base a señales fisiológicas Con respecto al sistema biométrico, esta tesis contribuye con el diseño y la implementación de un sistema biométrico de geometría de mano, donde la adquisición se realiza sin ningún tipo de contacto, y el patrón del usuario se crea considerando únicamente datos del propio individuo. Además, esta tesis propone un algoritmo de segmentación multiescala para solucionar los problemas que conlleva la adquisición de manos en entornos reales. Por otro lado, respecto a la extracción de características y su posterior comparación esta tesis tiene una contribución específica, proponiendo esquemas adecuados para llevar a cabo tales tareas con un coste computacional bajo pero con una alta precisión en el reconocimiento de personas. Por último, este sistema es evaluado acorde a la norma estándar ISO/IEC 19795 considerando seis bases de datos públicas. En relación al método de detección de estrés, esta tesis propone un sistema basado en dos señales fisiológicas, concretamente la tasa cardiaca y la conductancia de la piel, así como la creación de un innovador patrón de estrés que recoge el comportamiento de ambas señales bajo las situaciones de estrés y no-estrés. Además, este sistema está basado en lógica difusa para decidir el grado de estrés de un individuo. En general, este sistema es capaz de detectar estrés de forma precisa y en tiempo real, proporcionando una solución adecuada para sistemas biométricos actuales, donde la aplicación del sistema de detección de estrés es directa para evitar situaciónes donde los individuos sean forzados a proporcionar sus datos biométricos. Finalmente, esta tesis incluye un estudio de aceptabilidad del usuario, donde se evalúa cuál es la aceptación del usuario con respecto a la técnica biométrica propuesta por un total de 250 usuarios. Además se incluye un prototipo implementado en un dispositivo móvil y su evaluación. ABSTRACT: This thesis proposes a hand biometric system oriented to unconstrained and contactless scenarios together with a stress detection method able to elucidate to what extent an individual is under stress based on physiological signals. Concerning the biometric system, this thesis contributes with the design and implementation of a hand-based biometric system, where the acquisition is carried out without contact and the template is created only requiring information from a single individual. In addition, this thesis proposes an algorithm based on multiscale aggregation in order to tackle with the problem of segmentation in real unconstrained environments. Furthermore, feature extraction and matching are also a specific contributions of this thesis, providing adequate schemes to carry out both actions with low computational cost but with certain recognition accuracy. Finally, this system is evaluated according to international standard ISO/IEC 19795 considering six public databases. In relation to the stress detection method, this thesis proposes a system based on two physiological signals, namely heart rate and galvanic skin response, with the creation of an innovative stress detection template which gathers the behaviour of both physiological signals under both stressing and non-stressing situations. Besides, this system is based on fuzzy logic to elucidate the level of stress of an individual. As an overview, this system is able to detect stress accurately and in real-time, providing an adequate solution for current biometric systems, where the application of a stress detection system is direct to avoid situations where individuals are forced to provide the biometric data. Finally, this thesis includes a user acceptability evaluation, where the acceptance of the proposed biometric technique is assessed by a total of 250 individuals. In addition, this thesis includes a mobile implementation prototype and its evaluation.

A strain-based failure criterion for pillar stability analysis

Strain-based failure criteria have several advantages over stress-based failure criteria: they can account for elastic and inelastic strains, they utilise direct, observables effects instead of inferred effects (strain gauges vs. stress estimates), and model complete stress-strain curves including pre-peak, non-linear elasticity and post-peak strain weakening. In this study, a strain-based failure criterion derived from thermodynamic first principles utilising the concepts of continuum damage mechanics is presented. Furthermore, implementation of this failure criterion into a finite-element simulation is demonstrated and applied to the stability of underground mining coal pillars. In numerical studies, pillar strength is usually expressed in terms of critical stresses or stress-based failure criteria where scaling with pillar width and height is common. Previous publications have employed the finite-element method for pillar stability analysis using stress-based failure criterion such as Mohr-Coulomb and Hoek-Brown or stress-based scalar damage models. A novel constitutive material model, which takes into consideration anisotropy as well as elastic strain and damage as state variables has been developed and is presented in this paper. The damage threshold and its evolution are strain-controlled, and coupling of the state variables is achieved through the damage-induced degradation of the elasticity tensor. This material model is implemented into the finite-element software ABAQUS and can be applied to 3D problems. Initial results show that this new material model is capable of describing the non-linear behaviour of geomaterials commonly observed before peak strength is reached as well as post-peak strain softening. Furthermore, it is demonstrated that the model can account for directional dependency of failure behaviour (i.e. anisotropy) and has the potential to be expanded to environmental controls like temperature or moisture.

Stress and strain-driven algorithmic formulations for finite strain viscoplasticity for hybrid and standard finite elements

This work deals with the formulation and implementation of finite deformation viscoplasticity within the framework of stress-based hybrid finite element methods. Hybrid elements, which are based on a two-field variational formulation, are much less susceptible to locking than conventional displacement-based elements. The conventional return-mapping scheme cannot be used in the context of hybrid stress methods since the stress is known, and the strain and the internal plastic variables have to be recovered using this known stress field.We discuss the formulation and implementation of the consistent tangent tensor, and the return-mapping algorithm within the context of the hybrid method. We demonstrate the efficacy of the algorithm on a wide range of problems.

Effects of work-related sleep restriction on acute physiological and psychological stress responses and their interactions: A review among emergency service personnel

Emergency work can expose personnel to sleep restriction. Inadequate amounts of sleep can negatively affect physiological and psychological stress responses. This review critiqued the emergency service literature (e.g., firefighting, police/law enforcement, defense forces, ambulance/paramedic personnel) that has investigated the effect of sleep restriction on hormonal, inflammatory and psychological responses. Furthermore, it investigated if a psycho-physiological approach can help contextualize the significance of such responses to assist emergency service agencies monitor the health of their personnel. The available literature suggests that sleep restriction across multiple work days can disrupt cytokine and cortisol levels, deteriorate mood and elicit simultaneous physiological and psychological responses. However, research concerning the interaction between such responses is limited and inconclusive. Therefore, it is unknown if a psycho-physiological relationship exists and as a result, it is currently not feasible for agencies to monitor sleep restriction related stress based on psycho- physiological interactions. Sleep restriction does however, appear to be a major stressor contributing to physiological and psychological responses and thus, warrants further investigation.

Issues on the mean stress effect in fretting fatigue of a 7050-T7451 Al alloy posed by new experimental data

The aims of this work are: (i) to produce new experimental data for fretting fatigue considering the presence of a mean bulk stress and (ii) to assess two design methodologies against failure by fretting fatigue. Tests on a cylinder–flat contact configuration were conducted using a fretting apparatus mounted on a servo-hydraulic machine. The material used for both the pads and fatigue specimen was an aeronautical 7050-T7451 Al alloy. The experimental program was designed with all relevant parameters, apart from the mean bulk load (always applied before the contact loads), kept constant. The mean bulk stress varied from compressive to tensile values while maintaining a high peak pressure in order to encourage crack initiation. Two methodologies against fretting fatigue are proposed and confronted against the experimental data. The non-local stress-based methodology considers the evaluation of a critical plane fatigue criterion at the center of a process zone located beneath the contacting surfaces. The results showed that it correctly predicts crack initiation, but was not capable to provide successful prediction of the integrity of the specimens. Alternatively, we considered a crack arrest criterion which has the potential to provide a more complete description about the integrity of the specimens.

Generalized resistance resources of informal caregivers: A study of demands for care, competing demands, perception of burden and cognitive stress

This study examines the relationship among psychological resources (generalized resistance resources), care demands (demands for care, competing demands, perception of burden) and cognitive stress in a selected population of primary family caregivers. The study utilizes Antonovsky's Salutogenic Model of Health, specifically the concept of generalized resistance resources (GRRs), to analyze the relative effect of these resources on mediating cognitive stress, controlling for other care demands. The study is based on a sample of 784 eligible caregivers who (1) were relatives, (2) had the main responsibility for care, defined as a primary caregiver, and (3) provided a scaled stress score for the amount of overall care given to the care recipient (family member). The sample was drawn from the 1982 National Long-Term Care Survey (NLTCS) of individuals who assisted a given NLTCS sample person with ADL limitations.^ The study tests the following hypotheses: (a) There will be a negative relationship between generalized resistance resources (GRRs) and cognitive stress controlling for care demands (demands for care, competing demands, and perceptions of burden); (b) of the specific GRRs (material, cognitive, social, cultural-environmental) the social domain will represent the most significant factor predicting a decrease in cognitive stress; and (c) the social domain will be more significant for the female than the male primary family caregiver in decreasing cognitive stress.^ The study found that GRRs had a statistically significant mediating effect on cognitive stress, but the GRRs were a less significant predictor of stress than perception of burden and demands for care. Thus, although the analysis supported the underlying hypothesis, the specific hypothesis regarding GRRs' greater significance in buffering cognitive stress was not supported. Second, the results did not demonstrate the statistical significance or differences among the GRR domains. The hypothesis that the social GRR domain was most significant in mediating stress of family caregivers was not supported. Finally, the results confirmed that there are differences in the importance of social support help in mediating stress based on gender. It was found that gender and social support help were related to cognitive stress and gender had a statistically significant interaction effect with social support help. Implications for clinical practice, public health policy, and research are discussed. ^