Replacing egg yolk with soybean lecithin in the cryopreservation of stallion semen

The objective of this study was to determine whether replacing the egg yolk with soybean lecithin in the Botu-Crio (R) cryodiluent would maintain the fertility of cryopreserved stallion sperm. Two experiments were performed to evaluate cell freezability. In experiment 1, sperm from 15 stallions were frozen in Botu-Crio (R) (BC) or Botu-Crio (R) which contained 45 g/L soybean lecithin (BCLS45) in place of the egg yolk. In experiment 2, we compared different concentrations of soybean lecithin: 0, 10.0, 12.5, 15.0, 17.5 and 20.0 g/L (BC, BCLS10, BCLS12.5, BCLS17.5 and BCLS20, respectively). In experiment 1, sperm frozen in BC and BCLS45 exhibited similar (P > 0.05) percentages of total motile sperm (61% and 61%, respectively); progressively motile sperm (27% and 27%, respectively) and sperm with intact plasma membranes (IMP; 53% and 57%, respectively). Similarly, sperm frozen in BC or BC containing any concentration of soybean lecithin maintained similar (P > 0.05) percentages of total motile sperm (61-68%) and progressively motile sperm (27-31%). In the first fertility trial, we used cryopreserved semen from a single stallion was inseminated into mares. The semen from the sperm that were frozen in BC diluent resulted in a higher fertility rate (66%, 16/24) compared to the sperm that were frozen in BCLS45 diluent (17%, 5/29; P < 0.01). Similarly, in a second fertility trial, the mares that were inseminated with the sperm that were frozen in BC diluent exhibited a higher fertility rate (66%, 16/24) compared to the mares that were inseminated with the sperm that were frozen in BCLS20 (40%, 10/25; Pc 0.05). Finally, in a third trial, the sperm that were frozen in BC resulted in a higher fertility rate in mares (75%, 18/24) compared to the sperm that were frozen in BCLS10 (41%, 10/24; P < 0.05). Although replacing the egg yolk in the BC cryodiluent with soybean lecithin provided similar laboratory results for stallion sperm, after cryopreservation, the sperm that was frozen with soybean lecithin in the diluent correlated with lower fertility rates. Based on these results, we concluded that the use of BCLS can be used as an alternative diluent for cryopreserving stallion sperm. However, the resulting reduced fertility rate is a matter of concern. Further studies are necessary to clarify the reasons for this decrease in fertility and to determine the optimal lecithin concentration for diluents to freeze stallion sperm. (C) 2011 Elsevier B.V. All rights reserved.

Development of a water-in-oil-in-water multiple emulsion system integrating biomimetic aqueous-core lipid nanodroplets for protein entity stabilization. Part I: experimental factorial design

Lipid nanoballoons integrating multiple emulsions of the type water-in-oil-in-water enclose, at least in theory, a biomimetic aqueous-core suitable for housing hydrophilic biomolecules such as proteins, peptides and bacteriophage particles. The research effort entertained in this paper reports a full statistical 23x31 factorial design study (three variables at two levels and one variable at three levels) to optimize biomimetic aqueous-core lipid nanoballoons for housing hydrophilic protein entities. The concentrations of protein, lipophilic and hydrophilic emulsifiers, and homogenization speed were set as the four independent variables, whereas the mean particle hydrodynamic size (HS), zeta potential (ZP) and polydispersity index (PI) were set as the dependent variables. The V23x31 factorial design constructed led to optimization of the higher (+1) and lower (-1) levels, with triplicate testing for the central (0) level, thus producing thirty three experiments and leading to selection of the optimized processing parameters as 0.015% (w/w) protein entity, 0.75% (w/w) lipophilic emulsifier (soybean lecithin) and 0.50% (w/w) hydrophilic emulsifier (poloxamer 188). In the present research effort, statistical optimization and production of protein derivatives encompassing full stabilization of their three-dimensional structure, has been attempted via housing said molecular entities within biomimetic aqueous-core lipid nanoballoons integrating a multiple (W/O/W) emulsion.

Drying rates of Rubi grapes submitted to chemical pretreatments for raisin production

The objective of this work was to determine the most appropriated chemical treatment to be used to dry grapes cv. Rubi for raisin production. Drying curves for convective drying with air at 50ºC, in a tray drier, were obtained for grapes submitted to chemical pretreatments with different concentrations of potassium carbonate and olive oil, and different dipping times, according to factorial designs. Convective drying curves were also obtained for grapes pretreated in aqueous suspensions of soybean lecithin, at varied lecithin concentrations and dipping times. Page model was adjusted to the experimental drying curves, and the calculated drying times showed that the best pretreatment consisted in dipping grapes for 2 minutes in a 5% olive oil and 6% K2CO3 emulsion, at 50ºC, which resulted in a drying time close to that of the pretreatment with 2.5% of olive oil, but with a lower consumption of this substance. In addition, the immersion of grapes in an aqueous suspension of 2% soy lecithin, at 50ºC, for 5 minutes, resulted in a total drying time slightly higher than the most effective pretreatment.

Caracterização da pureza de fosfatidilcolina da soja através de RMN de ¹H e de 31P

A strategy is proposed to evaluate the purity of phosphatidylcholine from soybean lecithin, obtained by extraction or column chromatography, using the integrals ratio of ¹H NMR spectra. Integrals of methylene signals, around 1.3 and 1.6 ppm, are added and divided by the integral of the choline methyl groups, around 3.3 ppm. Before purification, a ratio of 19.68±1.37 was determined. Using extraction, a ratio of 10.70±0.61 was found, while from column chromatography, a value of 2.99±0.25 was detected. 31P NMR of standard phosphatidylcholine showed signals at -0.2 and -0.9 ppm, whereas the purified one showed a single signal at -0.9 ppm.

GLICEROFOSFOLIPÍDIOS SINTÉTICOS PARA USO COMO ADITIVO BIOCIDA EM TINTAS ANTI‑INCRUSTANTE

AbstractThis paper presents a technological innovation that uses a subclass of glycerophospholipids as a booster biocide in antifouling paint. These glycerophospholipid PAF-analogs are economically and environmentally viable compounds because they are synthesized from a metal-free raw material source-soybean lecithin. The synthesis, which involves transesterification followed by an alkylation reaction, produced a mixture of glycerophospholipids that were characterized by mass spectrometry. Evaluation of the antifouling performance with field tests showed that the replacement of ordinary halogenated booster biocide with the synthesized product gave a better efficiency and an exceptional antifouling activity with a significant reduction in the coverage of the fouling macro-organisms.

Effects of different dietary lipid sources on the survival, growth, and fatty acid composition of South American catfish, Pseudoplatystoma fasciatum, Surubim, juveniles

The present study examines the effect of four semi-purified diets (casein-gelatin based) where the source of fatty acids was free (esterified) oleic acid and linoleic acid (LA) (LOA diet), linseed and olive oil (predominantly LA and linolenic acid) (LO diet), cod liver oil (rich in highly unsaturated fatty acids) (CLO diet), and soybean lecithin (phospholipids; mostly LA) (LE diet) on the growth of juvenile South American catfish (surubim, Pseudoplatystoma fasciatum, Pimelodidae) (0.98 +/- 0.04 g individual weight). Fish were fed at a restricted-readjusted feeding rate for 8 wk. At the end of the experiment, LE-diet-fed fish grew significantly larger than those of the other three groups (P < 0.05). Considerable cannibalism was observed in all the treatments. It is suggested that the quantitative growth performance may possibly change under other conditions, with less or no cannibalism. Survival did not differ significantly among the fish fed four different diets. Muscle and liver lipid contents did not vary among dietary treatments (P > 0.05), but whole-body lipid concentrations were affected by dietary treatments. Fish fed LE diet contained significantly lower lipid level than those fed three other diets (P < 0.05). Muscle and liver fatty acid profiles reflected dietary fatty acid composition. Arachidonic acid level was significantly higher in muscle and liver of fish fed LOA and LE diets than in those fed LO and CLO diets. The results suggest that the efficiency of elongation and desaturation of 18C fatty acids depends on the dietary lipid source, and South American catfish has considerable capacity to transform linoleate to arachidonate.

Drying rates of Rubi grapes submitted to chemical pretreatments for raisin production

O objetivo deste trabalho foi selecionar o pré-tratamento químico mais apropriado para a secagem de uvas cv. Rubi para a produção de passas. Foram obtidas curvas de secagem convectiva com ar a 50ºC, em um secador de bandejas, para uvas submetidas a pré-tratamentos químicos com diferentes concentrações de carbonato de potássio e azeite de oliva, e diferentes tempos de imersão, de acordo com planejamentos fatoriais. Também foram obtidas curvas de secagem convectiva, para uvas pré-tratadas em suspensões aquosas de lecitina de soja, em várias concentrações de lecitina e diferentes tempos de imersão. O modelo de Page foi ajustado às curvas de secagem experimental, e os tempos de secagem calculados mostraram que o melhor pré-tratamento consistiu na imersão das uvas por 2 minutos, em uma emulsão de 5% de azeite de oliva e 6% de K2CO3, a 50ºC, o que resultou em tempos de secagem próximos aos do pré-tratamento com 2,5% de azeite de oliva, mas com um menor consumo dessa substância. Além disso, a imersão das uvas em uma suspensão aquosa de 2% de lecitina de soja, a 50ºC, por 5 minutos, resultou em um tempo de secagem total apenas levemente superior ao do pré-tratamento mais efetivo.

Efeito da utilização de diferentes diluidores para a produção in vitro de embriões bovinos

Objetivou-se avaliar as características morfológica e funcional do sêmen bovino congelado comparando-se a eficácia de dois diferentes diluidores. O ejaculado de quatro touros foi dividido em duas partes iguais, uma submetida ao diluidor Tris e gema de ovo (A) e outra ao diluidor à base de lecitina de soja (Andromed®) (B). No experimento I, cinco palhetas dos diluidores A e B de cada touro foram descongeladas e avaliadas quanto à motilidade, vigor, concentração, morfologia espermática e teste de termor-resistência lento. Foram feitas, ainda, avaliação da integridade de membranas, por meio da associação das sondas iodeto de propídio, isotiocionato de fluoresceína - Pisum sativum e carbocianina catiônica lipofílica, e avaliação funcional da membrana plasmática com teste hiposmótico. A avaliação da integridade da cromatina foi realizada pelo método de coloração com laranja de acridina. No experimento II, o sêmen com os diferentes diluidores foi utilizado na fecundação in vitro, sendo observadas taxas de clivagem e desenvolvimento embrionário in vitro. em relação aos resultados obtidos, apenas a porcentagem de espermatozoides no sêmen congelado foi discretamente maior com o diluidor A, concluindo-se que o diluidor composto por lecitina de soja pode substituir o composto por Tris e gema de ovo, respeitando-se as variações individuais de cada touro utilizado no presente experimento.

Efeito de um quelante de cálcio, um detergente e da lecitina de soja sobre a qualidade do sêmen caprino congelado-descongelado

The aim of this paper was verifying the effect of the Equex STM Paste and EDTA addition to a Tris-egg yolk extender, on the postthaw goat sperm viability. Nine semen samples of two adult goats were collected by artificial vagina and cryopreserved. It was also objective of this study, to evaluate the utilization of a soybean lecithin based commercial extender (Bioexcell® - IMV, L'Aigle, French) for the goat semen freezing. They were formed five experimental groups: TRIS; TRIS+EDTA; TRIS+EQUEX; TRIS+EDTA+EQUEX e Bioexcell. After evaluation, the semen was diluted in the five extenders and packed in 0.25mL straws with 100 million of motile spermatozoa. The samples were cooled at 0,46°C/min to 5°C, submitted at 75min of equilibration time and frozen in liquid nitrogen vapour. The thawing was accomplished in 37°C water bath for 50s. There were no differences (P>0,05) on the means of post-thaw total and progressive sperm motility among the groups TRIS, TRIS+EQUEX and TRIS+EQUEX+EDTA. The Bioexcell group obtained the least (P<0,05) percentage of post-thawing total and progressive sperm motility. After the thermotolerance test, it was observed the greatest (P<0,05) rates of total and progressive sperm motility in the Equex STM groups (TRIS+EQUEX and TRIS+EQUEX+EDTA). Thus, it can be affirmed that the Equex addition promotes better maintenance rates in the pos-thaw sperm viability, when compared with the extenders that did not contain it.

Avaliação nutricional de diferentes fontes de gordura e do uso de lecitina em alimentos extrusados para gatos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização e processamento de leite bubalino em pó em secador por nebulização

Avaliou-se o processo de secagem por nebulização em "spray dryer" para a obtenção de leite bubalino em pó. Foram realizadas análises físico-químicas no leite in natura e no leite desidratado, para averiguar perdas de macronutrientes ocorridas durante a secagem; análises microbiológicas para assegurar a qualidade higiênico-sanitária do processo e produto e análises sensoriais para estabelecer a aceitabilidade do produto. Foram obtidas isotermas de adsorção e dessorção de umidade a 25°C, para o produto em pó, visando observar o seu comportamento higroscópico. O leite bubalino em pó obtido apresentou como características físicoquímicas: 3,4% de umidade, 23,2% de proteínas, 46,1% de gordura, 4,2% de cinzas, 0,5% de lecitina de soja e 22,6% de carboidratos totais. De acordo com os exames microbiológicos está apto para o consumo humano. O produto foi caracterizado como integral por não ter sofrido qualquer padronização. As perdas ocorridas para a maioria dos macronutrientes durante o processamento, foram inferiores a 5% e apenas o teor de proteínas apresentou variação superior a 15%, devido à desnaturação da caseína em temperatura superior a 80°C. O produto apresentou isotermas de adsorção do tipo III, mesmo comportamento apresentado pelo leite bovino. Através da isoterma de dessorção determinou-se o valor de umidade equivalente à monocamada, obtendo-se o valor médio de 4,4g H₂O/100g b.s., o que validou o processo utilizado. O comportamento de histerese apresentado pelo produto foi similar ao do leite em pó integral, sendo a sua aceitabilidade de 74%, muito próxima a 80% obtido para um leite em pó integral comercial.

Acid Lipase from Candida viswanathii: Production, Biochemical Properties, and Potential Application

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Encapsulação de colecalciferol (vitamina D3) por spray chilling

A indústria de alimentos está constantemente desenvolvendo produtos que fornecem, além de nutrientes, benefícios adicionais à saúde, tais como os enriquecidos com vitaminas. A vitamina D3 (colecalciferol) é sintetizada na pele durante a exposição da luz solar, controla a homeostase de cálcio e fósforo, metabolismo ósseo, pressão arterial e reabsorção renal de cálcio. O processo de microencapsulação vem sendo bastante aplicado em alimentos e um dos objetivos principais é o controle da liberação do agente ativo no momento e local desejado. A tecnologia de spray chilling é interessante para a microencapsulação de vitaminas lipossolúveis. O objetivo deste trabalho foi microencapsular vitamina D3, utilizando o método de spray chilling para a produção das micropartículas lipídicas sólidas (MLS). Para produção das MLS utilizou-se gordura vegetal com ponto de fusão em torno de 48 °C como carreador. Três tratamentos foram estabelecidos: sem aditivos (T1), com adição de 1% de cera de abelha (T2) e com 1% de lecitina de soja (T3). As micropartículas foram caracterizadas quanto à morfologia por microscopia eletrônica de varredura, tamanho médio por difração a laser, espectroscopia no infravermelho por transformada de Fourier (FTIR) e foi analisada a estabilidade da vitamina D3 durante o armazenamento a 10 e 25 °C, por meio de quantificações periódicas em cromatografia líquida de alta eficiência (CLAE). As micropartículas obtidas foram esféricas, semelhantes morfologicamente e com distribuição monocaudal de partículas. O tamanho médio das partículas variou em função dos seus ingredientes, sendo que as micropartículas produzidas apenas com vitamina e gordura foram menores em relação às demais (83,0% < 100 µm). A espectroscopia na região do infravermelho (FTIR) demonstrou que não ocorreu interação entre os ingredientes. A estabilidade da vitamina D3 encapsulada foi satisfatória ao longo de 65 dias com valores superiores a 87% para os três tratamentos e a temperatura apresentou influência na estabilidade. As MLS produzidas com cera apresentaram melhores resultados de estabilidade de vitamina D3 com valores de 90,18 ± 2,23 % após 65 dias de estocagem. Esses resultados são promissores e demostram a viabilidade da técnica de spray chilling na produção de MLS carregadas de vitamina D3, possibilitando uma futura aplicação em alimentos.

Thermoanalysis of soybean oil extracted by two methods

The thermal stability of vegetable oils is an important factor that affects their quality. In this study, we investigated the thermal stability of oil and lecithin extracted from soybeans by two distinct processes: mechanical extraction (pressing) and physical extraction (solvent). Thermal analysis was used to obtain information about different methodologies of extraction. The physically extracted products proved more stable than those extracted mechanically. Raman and UV-Vis techniques were applied to underpin the discussion of process differences.