INVESTIGATION OF PATIENT PERCEPTION OF HOSPITAL NOISE AND SOUND LEVEL MEASUREMENTS: BEFORE, DURING, AND AFTER RENOVATIONS OF A HOSPITAL WING

Acoustic conditions in hospitals have been shown to influence a patient’s physical and psychological health. Noise levels in an Omaha, Nebraska, hospital were measured and compared between various times: before, during, and after renovations of a hospital wing. The renovations included cosmetic changes and the installation of new in-room patient audio-visual systems. Sound pressure levels were logged every 10-seconds over a four-day period in three different locations: at the nurses' station, in the hallway, and in a nearby patient’s room. The resulting data were analyzed in terms of the hourly A-weighted equivalent sound pressure levels (

Audio level meter ME-71A/FCC.

"June 1956."

Noise levels in a general intensive care unit : a descriptive study.

The aim of this small-scale study was to measure, analyse and compare levels of acoustic noise, in a nine-bedded general intensive care unit (ICU). Measurements were undertaken using the Norsonic 116 sound level meter recording noise levels in the internationally agreed ‘A’ weighted scale. Noise level data were obtained and recorded at 5 min over 3 consecutive days. Results of noise level analysis indicated that mean noise levels within this clinical area was 56·42 dB(A), with acute spikes reaching 80 dB(A). The quietest noise level attained was that of 50 dB(A) during sporadic intervals throughout the 24-h period. Parametric testing using analysis of variance found a positive relationship (p ≤ 0·001) between the nursing shifts and the day of the week. However, Scheffe multiple range testing showed significant differences between the morning shift, and the afternoon and night shifts combined (p ≤ 0·05). There was no statistical difference between the afternoon and night shifts (p ≥ 0·05). While the results of this study may seem self-evident in many respects, what it has highlighted is that the problem of excessive noise exposure within the ICU continues to go unabated. More concerning is that the prolonged effects of excessive noise exposure on patients and staff alike can have deleterious effect on the health and well-being of these individuals.

Noise levels in a General Surgical Ward : a descriptive study

Aims and objectives.  This study was undertaken to measure and analyse levels of acoustic noise in a General Surgical Ward. Method.  Measurements were undertaken using the Norsonic 116 sound level meter (SLM) recording noise levels in the internationally agreed ‘A’ weighted scale. Noise level data and observational data as to the number of staff present were obtained and recorded at 5-min intervals over three consecutive days. Results.  Results of noise level analysis indicated that mean noise level within this clinical area was 42.28 dB with acute spikes reaching 70 dB(A). The lowest noise level attained was that of 36 dB(A) during the period midnight to 7 a.m. Non-parametric testing, using Spearman's Rho (two-tailed), found a positive relationship between the number of staff present and the level of noise recorded, indicating that the presence of hospital personnel strongly influences the level of noise within this area. Relevance to clinical practice.  Whilst the results of this may seem self-evident in many respects the problems of excessive noise production and the exposure to it for patients, hospital personnel and relatives alike continues unabated. What must be of concern is the psychophysiological effects excessive noise exposure has on individuals, for example, decreased wound healing, sleep deprivation and cardiovascular stimulation.

A Low-Cost System for Measurement and Spectral Analysis of Motor Acoustic Noise

Workplace noise has become one of the major issues in industry not only because of workers’ health but also due to safety. Electric motors, particularly, inverter fed induction motors emit objectionably high levels of noise. This has led to the emergence of a research area, concerned with measurement and mitigation of the acoustic noise. This paper presents a lowcost option for measurement and spectral analysis of acoustic noise emitted by electric motors. The system consists of an electret microphone, amplifier and filter. It makes use of the windows sound card and associated software for data acquisition and analysis. The measurement system is calibrated using a professional sound level meter. Acoustic noise measurements are made on an induction motor drive using the proposed system as per relevant international standards. These measurements are seen to match closely with those of a professional meter.

A critical analysis of loudness calculation methods

The physical meaning and calculation procedures for determining loudness was critically analyzed. Four noise sources were used in comparing the software packages dBFA dBSonic, which were used in the investigation to a public domain code. The purpose of the comparison was to evaluate the validity of the results obtained and to gain an idea of the shortcomings of the relevant standards. A comparison of the results for loudness was computed from various methods, used in the study. Two basic sources of input data such as a sound level meter (SLM) and a 01 dB data acquisition system (DAQ), were available for the comparison. The SLM directly gave 1/3 octave band levels, while the data from the DAQ was filtered to give the results. Five processing methods, including a Visual Basic (VB) program and a VB program adapted from dBFA, were used for the study. It was found that the calculation of loudness from 1/3 octave cannot be separated from the filtering process.

Acoustic and psychoacoustic analysis of the noise produced by the police force firearms

Police officers are exposed to impact noise coming from firearms, which may cause irreversible injuries to the hearing system.Aim: To evaluate the noise exposure in shooting stands during gunfire exercises, to analyze the acoustic impact of the noise produced by the firearms and to associate it with tonal audiometry results.Study design: Cross-sectional.Materials and methods: To measure noise intensity we used a digital sound level meter, and the acoustic analysis was carried out by means of the oscillations and cochlear response curves provided by the Praat software. 30 police officers were selected (27 males and 3 females).Results: The peak level measured was 113.1 dB(C) from a .40 pistol and 116.8 dB(C) for a .38 revolver. The values obtained for oscillation and Praat was 17.9 +/- 0.3 Barks, corresponding to the rate of 4,120 and 4,580 Hz. Audiometry indicated greater hearing loss at 4,000Hz in 86.7% of the cases.Conclusion: With the acoustic analysis it was possible to show cause and effect between the main areas of energy excitation of the cochlea (Praat cochlear response curve) and the frequencies of low hearing acuity.

Efeito das condições ambientais no nível de ruído emitido por leitões

Objetivou-se, com este trabalho, avaliar a influência das variáveis ambientais nos níveis de ruídos emitidos por suínos e quantificar as faixas em dB comparativamente às condições de conforto térmico estabelecidas pela literatura. O experimento foi conduzido em câmara climática, onde foram alojados cinco leitões em fase de creche, submetidos à variação na temperatura ambiente de 20°C a 38°C e umidade relativa de 50% a 80%. Decibelímetros foram instalados para o registro dos níveis de ruídos e sensores dataloggers para os dados de temperatura e umidade relativa. O nível de atividade foi utilizado para quantificar a movimentação dos animais por intermédio de análise de imagens. Análises de correlação e regressão foram aplicadas nos dados para análise estatística. As variáveis ambientais influenciam na emissão de ruídos pelos leitões quando expostos a diferentes condições térmicas. Os níveis de ruídos foram estabelecidos em faixas de acordo com a condição térmica a que animais foram submetidos. Para a condição de conforto (20 a 23°C), níveis de ruídos na faixa de 70 a 75dB; condição de alerta (23 a 30°C), níveis de ruídos na faixa de 60 a 70dB e para condição de estresse térmico (acima de 30°C), na faixa de 55 a 60dB.

Análise dos níveis de ruído produzidos pelas canetas de alta rotação nas freqüências de bandas de oitavas e as atenuações dos protetores auriculares

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação dos níveis de ruído e das soluções arquitetônicas adotadas em ambientes das unidades de urgência e emergência no município de Belém-PA

Nos grandes centros urbanos pode-se constatar que o nível de ruído é tão elevado que ameaça a integridade psicológica e física dos habitantes. Entretanto, observa-se que muito do ruído no ambiente hospitalar origina-se de dentro do hospital, tendo como uma das principais fontes geradoras de ruído nas unidades os equipamentos e a conversação entre a equipe hospitalar. A perda auditiva induzida pelo ruído (PAIR) é uma das consequências que o ruído elevado pode acarretar à saúde, entre outros danos. Assim, o ambiente hospitalar que deveria ser sereno e silencioso transforma-se em um espaço ruidoso e estressante, aumentando a ansiedade e a percepção dolorosa do paciente, reduzindo o sono e estendendo a convalescença. Objetivo: Avaliar as condições acústicas dos principais ambientes nas unidades de urgência e emergência no município de Belém, Estado do Pará, Brasil. Verificar a adequação às normas sanitárias e técnicas vigentes, com a simulação de um ambiente piloto validado com a utilização do software ODEON e apresentar soluções virtuais de condicionamento acústico. Material e Métodos: foi utilizado o equipamento Medidor de Nível Sonoro com certificado de calibração da Rede Brasileira de Calibração (RBC) para aferição dos NPS nos períodos diurno e noturno, de acordo com o estabelecido pela NBR 10.151 (2000), além da observação e identificação das fontes de ruído dos ambientes. Resultados: Os valores obtidos durante as aferições dos NPS nos ambientes do Hospital A foram de 58 dB(A) a 70 dB(A) e do Hospital B foram de 62 dB(A) a 70 dB(A). O ambiente piloto foi selecionado de acordo com os resultados e com o tempo de permanência da equipe de saúde e dos pacientes. Conclusão: foi desenvolvido o modelo computacional validado do ambiente piloto, gerando um modelo proposto com intervenções arquitetônicas visando o conforto acústico da equipe de saúde e dos pacientes. Os ambientes pesquisados não apresentaram níveis de ruído superiores a 85 dB(A), comprovando que não há risco ocupacional para as equipes de saúde. Entretanto, níveis de ruídos elevados, por mais que não causem PAIR nos trabalhadores, são responsáveis por estimular ou até mesmo por desencadear diversos sintomas que prejudicam a capacidade laborativa da equipe de saúde, além de aumentar a convalescença e prejudicar a recuperação dos pacientes.

Análise acústica em brinquedos ruidosos

PURPOSE: to analyze the levels of noise emitted by nationally-sold toys for use by children from 1 to 5 year old; to compare the values among the toys with and without the seal of Inmetro (National Institute of Metrology, Standardization and Industrial Quality) and to analyze the sound spectrum of toys, in order to identify the area of the cochlea that may be more affected by these noises. METHOD: measurements were performed on 20 sound toys (10 with the seal of the Inmetro and 10 without the seal) with the use of digital sound level meter in an acoustically treated room, and the sound analysis was performed using the Praat program. RESULTS: toys placed at 2.5 cm from the equipment with the seal of the Inmetro had an intensity ranging from 61.50 to 91.55 dB (A) and from 69.75 to 95.05 dB (C), positioned at 25 cm ranged from 58.3 to 79.85 dB (A) and from 62.50 to 83.65 dB (C). The results of the toys without warranty stamps placed at 2.5 cm ranged from 67.45 to 94.30 dB (A) and 65.4 to 99.50 dB (C) and the distance of 25 cm recorded from 61. 30 to 87.45 dB (A) and 63.75 to 97.60 dB (C), so that the findings demonstrated that there are noisy toys that go beyond the values recommended by the current legislation in both groups, with and without warranty stamps . CONCLUSION: the toys without the seal of Inmetro showed intensities values significantly higher than the other group, offering more risk to the children s hearing health.