Ocorrência de moscas brancas (Hemiptera: Aleyrodidae) e do predador Delphastus pusillus (LeConte) (Coleoptera: Coccinellidae) em mamoeiro (Carica papaya L.) sob cultivo em ambiente protegido

Em fevereiro e outubro de 1998, na área experimental da Fazenda de Ensino e Pesquisa da UNESP no município de Selvíria-MS (latitude 20° 22' S, longitude 51° 22' W, altitude 335 m), foi constatada a presença de mosca branca em mamoeiro cultivar Baixinho de Santa Amália, plantado no interior de um telado com malha de 2 x 2 mm. Essa área fazia parte de um experimento visando determinar o efeito do cultivo em ambiente protegido sobre o desenvolvimento das plantas, a produção de frutos e a ocorrência do mosaico do mamoeiro. Nas duas ocasiões os insetos foram enviados ao Centro de Recursos Genéticos e Biotecnologia (CENARGEN) da Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) para identificação. Na primeira infestação o material foi identificado como Trialeurodes sp. e na infestação de outubro como Bemisia tabaci biótipo B . Nos dois casos havia grande quantidade de ninfas nas folhas maduras e de adultos nas folhas novas. Para Trialeurodes sp. foi realizada uma contagem de ninfas em dezoito folhas, em cinco áreas de 1 cm² por folha, distribuídas ao acaso, encontrando-se a média de 7,6 ninfas por cm². Como conseqüência da presença das duas espécies, o único dano observado foi um intenso desenvolvimento de fumagina recobrindo completamente a superfície das folhas, que acabaram por secar e cair. A infestação de B. tabaci biótipo B foi controlada pela presença de larvas e adultos do coccinelídeo Delphastus pusillus (LeConte) que alimentavam-se vorazmente das ninfas presentes.

Reduction In Metal-Mold Reactivity In Titanium Castings Through The Use Of Sodium Aluminate As Binder In Zircon Sand Molds

The present work is aimed at evaluating an alternative moulding system, namely, sodium aluminate bonded zircon sand mould and assess its suitability in relation to the much studied sodium silicate bonded zircon sand moulding system. It is described in the study presented here that with regard to metal - mould reaction, sodium aluminate bonded zircon sand mould system is a superior viable system as compared to sodium silicate bonded zircon moulding system at mould firing temperatures of 873 - 1473 K.

Observations on the inhibitory effect of sodium chloride on molds met with in smoked fishery products

Even though smoke curing is a very elegant method of preserving fish, the resultant products have only a very restricted shelf-life, unless stored under refrigerated conditions. The main source of spoilage is the early setting in of a vigorous growth of moulds. This problem is of a serious nature even in temperate climatic conditions. In full and universal recognition of the gravity of the problem, the FAO conference on herring technology held in September 1950 at Bergen in Norway has recommended the problem of "means of prevention of mould growth in smoked products" for future research study. This note records an interesting observation made at this Laboratory on the inhibitory action of sodium chloride on the development of mould in smoked fishery products.

Toxigenic molds on fish feeds-1: impact of climatic change

The present communication is a survey report carried out to assess the incidence of toxic mycoflora on seven types of agriculture products/by products incorporated during fish culture as supplementary dietary items. Samples were obtained from various sources at Darbhanga, Madhubani and Samashtipur districts during summer, winter and monsoon months. Out of the total 1774 samples, only 894 appeared to be fresh visually reflecting average incidence of contamination around 46.6%. However, the apparently fresh samples, when subjected to culture, 26.9% of them were found to be contaminated. Thus, degree of fungal spoilage in feed ingredients in parts of north Bihar appears to be significantly high (73.5%). The present study illustrates the facts with special reference to Aspergillus flavus, A. parasiticus (elaborating aflatoxins) A. ochraceous, Penicilium viradicatuin (elaborating ochratoxins) and A. versicolor (elaborating sterigmatocystin). The other strains already known for their toxigenic potentials that appeared on the present substrates included A. niger, A. fumigatus, A. candidus, P. islandicum, Rhizopus spp. and Mucur spp. Studies indicate that the prevalent climatic factors like temperature and relative humidity facilitate a congenial condition almost all through the year and in particular during summer and monsoon months. But water content of the substrates is a vital factor that further accelerates the pace of mycobial spoilage. A thorough sun-drying of the agricultural commodities before prolonged storage to bring water content below the "low risk limit" may significantly reduce the incidence of molds.

Fabrication of high-aspect-ratio polymer microstructures and hierarchical textures using carbon nanotube composite master molds

Scalable and cost effective patterning of polymer structures and their surface textures is essential to engineer material properties such as liquid wetting and dry adhesion, and to design artificial biological interfaces. Further, fabrication of high-aspect-ratio microstructures often requires controlled deep-etching methods or high-intensity exposure. We demonstrate that carbon nanotube (CNT) composites can be used as master molds for fabrication of high-aspect-ratio polymer microstructures having anisotropic nanoscale textures. The master molds are made by growth of vertically aligned CNT patterns, capillary densification of the CNTs using organic solvents, and capillary-driven infiltration of the CNT structures with SU-8. The composite master structures are then replicated in SU-8 using standard PDMS transfer molding methods. By this process, we fabricated a library of replicas including vertical micro-pillars, honeycomb lattices with sub-micron wall thickness and aspect ratios exceeding 50:1, and microwells with sloped sidewalls. This process enables batch manufacturing of polymer features that capture complex nanoscale shapes and textures, while requiring only optical lithography and conventional thermal processing. © 2011 The Royal Society of Chemistry.

Increasing the wear resistance of molds for injection of glass fiber reinforced plastics

Abrasion by glass fibers during injection molding of fiber reinforced plastics raises new challenges to the wear performance of the molds. In the last few decades, a large number of PVD and CVD coatings have been developed with the aim of minimizing abrasion problems. In this work, two different coatings were tested in order to increase the wear resistance of the surface of a mold used for glass fiber reinforced plastics: TiAlSiN and CrN/CrCN/DLC. TiAlSiN was deposited as a graded monolayer coating while CrN/CrCN/DLC was a nanostructured coating consisting of three distinct layers. Both coatings were produced by PVD unbalanced magnetron sputtering and were characterized using scanning electron microscopy (SEM) provided with energy dispersive spectroscopy (EDS), atomic force microscopy (AFM), micro hardness (MH) and scratch test analysis. Coating morphology, thickness, roughness, chemical composition and structure, hardness and adhesion to the substrate were investigated. Wear resistance was characterized through industrial tests with coated samples and an uncoated reference sample inserted in a feed channel of a plastic injection mold working with 30 wt.% glass fiber reinforced polypropylene. Results after 45,000 injection cycles indicate that the wear resistance of the mold was increased by a factor of 25 and 58, by the TiAlSiN and CrN/CrCN/DLC coatings, respectively, over the uncoated mold steel.

Plasma polymerization of C[subscript 4]F[subscript 8] thin film on high aspect ratio silicon molds

High aspect ratio polymeric micro-patterns are ubiquitous in many fields ranging from sensors, actuators, optics, fluidics and medical. Second generation PDMS molds are replicated against first generation silicon molds created by deep reactive ion etching. In order to ensure successful demolding, the silicon molds are coated with a thin layer of C[subscript 4]F[subscript 8] plasma polymer to reduce the adhesion force. Peel force and demolding status are used to determine if delamination is successful. Response surface method is employed to provide insights on how changes in coil power, passivating time and gas flow conditions affect plasma polymerization of C[subscript 4]F[subscript 8].

Attempted re-establishment of a sooty tern Onychoprion fuscatus breeding colony on Denis Island, Seychelles

Seychelles supports around three million nesting pairs of sooty terns. However, there have been recent declines and the colonies continue to face ongoing threats from habitat change and excessive commercial harvesting of their eggs, as well as potential threats by commercial fishing and climate change. A possible method to counter these threats is to re-establish breeding colonies on islands from which they have disappeared. An attempt was made to attract birds to a previously occupied island through habitat management, decoy birds and playback of recorded sooty tern calls. Habitat preparation involved predator eradication and tree removal to provide open ground with bare sandy areas and low herb vegetation. Overflying birds were attracted by broadcast calls, with some circling over and landing among the decoys. Large three-dimensional plastic models were superior to other models presented. This study demonstrated that large numbers of birds can be attracted by these means and that the birds then undertook behaviour associated with breeding, including egg laying by a few birds. However, after five seasons a breeding colony has not yet been established; one possible cause is the emergence of unexpected egg predators, common moorhen Gallinula chloropus and common myna Acridotheres tristis.

Bioprospection of yeasts as biocontrol agents against phytopathogenic molds

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Occurrence of molds on laminated paperboard for aseptic packaging, selection of the most hydrogen peroxide- and heat-resistant isolates and determination of their thermal death kinetics in sterile distilled water

This study aimed at enumerating molds (heat-labile and heat-resistant) on the surface of paperboard material to be filled with tomato pulps through an aseptic system and at determining the most heat-and hydrogen peroxide-resistant strains. A total of 118 samples of laminated paperboard before filling were collected, being 68 before and 50 after the hydrogen peroxide bath. Seven molds, including heat-resistant strains (Penicillium variotii and Talaromyces flavus) with counts ranging between 0.71 and 1.02 CFU/cm(2) were isolated. P. variotii was more resistant to hydrogen peroxide than T. flavus and was inactivated after heating at 85 degrees C/15 min. When exposed to 35 % hydrogen peroxide at 25 degrees C, T. flavus (F5E2) and N. fischeri (control) were less resistant than P. variotti (F1A1). P. citrinum (F7E2) was shown to be as resistant as P. variotti. The D values (the time to cause one logarithmic cycle reduction in a microbial population at a determined temperature) for spores of P. variotii (F1A1) and N. fischeri (control) with 4 months of age at 85 and 90 degrees C were 3.9 and 4.5 min, respectively. Although the contamination of packages was low, the presence of heat-and chemical-resistant molds may be of concern for package sterility and product stability during shelf-life. To our knowledge, this is the first report that focuses on the isolation of molds, including heat-resistant ones, contaminating paperboard packaging material and on estimating their resistance to the chemical and physical processes used for packaging sterilization.

Using rapid prototyping molds to create patient specific polymethylmethacrylate implants in cranioplasty

Cranioplasty is a commonly performed procedure. Outcomes can be improved by the use of patient specific implants, however, high costs limit their accessibility. This paper presents a low cost alternative technique to create patient specific polymethylmethacrylate (PMMA) implants using rapid prototyped mold template. We used available patient's CT-scans, one dataset without craniotomy and one with craniotomy, for computer-assisted design of a 3D mold template, which itself can be brought into the operating room and be used for fast and easy building of a PMMA implant. We applied our solution to three patients with positive outcomes and no complications.

Comparative transcriptomics of extreme phenotypes of human HIV-1 infection and SIV infection in sooty mangabey and rhesus macaque

High levels of HIV-1 replication during the chronic phase of infection usually correlate with rapid progression to severe immunodeficiency. However, a minority of highly viremic individuals remains asymptomatic and maintains high CD4⁺ T cell counts. This tolerant profile is poorly understood and reminiscent of the widely studied nonprogressive disease model of SIV infection in natural hosts. Here, we identify transcriptome differences between rapid progressors (RPs) and viremic nonprogressors (VNPs) and highlight several genes relevant for the understanding of HIV-1-induced immunosuppression. RPs were characterized by a specific transcriptome profile of CD4⁺ and CD8⁺ T cells similar to that observed in pathogenic SIV-infected rhesus macaques. In contrast, VNPs exhibited lower expression of interferon-stimulated genes and shared a common gene regulation profile with nonpathogenic SIV-infected sooty mangabeys. A short list of genes associated with VNP, including CASP1, CD38, LAG3, TNFSF13B, SOCS1, and EEF1D, showed significant correlation with time to disease progression when evaluated in an independent set of CD4⁺ T cell expression data. This work characterizes 2 minimally studied clinical patterns of progression to AIDS, whose analysis may inform our understanding of HIV pathogenesis.

Surface-patterned micromechanical elements by polymer injection molding with hybrid molds

Hybrid molds enable the fabrication of polymeric parts with features of different length scales by injection molding. The resulting polymer microelements combine optical or biological functionalities with designed mechanical properties. Two applications are chosen for illustration of this concept: As a first example, microelements for optical communication via fiber-to-fiber coupling are manufactured by combining two molds to a small mold insert. Both molds are fabricated using lithography and electroplating. As a second example, microcantilevers (μCs) for chemical sensing are surface patterned using a modular mold composed of a laser-machined cavity defining the geometry of the μCs, and an opposite flat tool side which is covered by a patterned polymer foil. Injection molding results in an array of 35 μm-thick μCs with microscale surface topographies. In both cases, when the mold is assembled and closed, reliefs are transferred onto one surface of the molded element whose outlines are defined by the micromold cavity. The main advantage of these hybrid methods lies in the simple integration of optical surface structures and gratings onto the surface of microcomponents with different sizes and orientations. This allows for independent development of functional properties and combinations thereof.

Weather Inputs to a Warning System for Sooty Blotch and Flyspeck of Apple

Sooty blotch and flyspeck (SBFS) is a mid- to late-season disease of apple. SBFS fungi show up as dark smudges and clusters of black dots on the fruit surface. Since blemished fruit are downgraded, crop losses can exceed 90 percent of the fresh market value.