Comparing protein–ligand interactions in solution and single crystals by Raman spectroscopy

By using a Raman microscope, we show that it is possible to probe the conformational states in protein crystals and crystal fragments under growth conditions (in hanging drops). The flavin cofactor in the enzyme para-hydroxybenzoate hydroxylase can assume two conformations: buried in the protein matrix (“in”) or essentially solvent-exposed (“out”). By using Raman difference spectroscopy, we previously have identified characteristic flavin marker bands for the in and out conformers in the solution phase. Now we show that the flavin Raman bands can be used to probe these conformational states in crystals, permitting a comparison between solution and crystal environments. The in or out marker bands are similar for the respective conformers in the crystal and in solution; however, significant differences do exist, showing that the environments for the flavin's isoalloxazine ring are not identical in the two phases. Moreover, the Raman-band widths of the flavin modes are narrower for both in and out conformers in the crystals, indicating that the flavin exists in a more limited range of closely related conformational states in the crystal than in solution. In general, the ability to compare detailed Raman data for complexes in crystals and solution provides a means of bridging crystallographic and solution studies.

A Component of the Xanthomonadaceae Type IV Secretion System Combines a VirB7 Motif with a N0 Domain Found in Outer Membrane Transport Proteins

Type IV secretion systems (T4SS) are used by Gram-negative bacteria to translocate protein and DNA substrates across the cell envelope and into target cells. Translocation across the outer membrane is achieved via a ringed tetradecameric outer membrane complex made up of a small VirB7 lipoprotein (normally 30 to 45 residues in the mature form) and the C-terminal domains of the VirB9 and VirB10 subunits. Several species from the genera of Xanthomonas phytopathogens possess an uncharacterized type IV secretion system with some distinguishing features, one of which is an unusually large VirB7 subunit (118 residues in the mature form). Here, we report the NMR and 1.0 angstrom X-ray structures of the VirB7 subunit from Xanthomonas citri subsp. citri (VirB7(XAC2622)) and its interaction with VirB9. NMR solution studies show that residues 27-41 of the disordered flexible N-terminal region of VirB7(XAC2622) interact specifically with the VirB9 C-terminal domain, resulting in a significant reduction in the conformational freedom of both regions. VirB7(XAC2622) has a unique C-terminal domain whose topology is strikingly similar to that of N0 domains found in proteins from different systems involved in transport across the bacterial outer membrane. We show that VirB7(XAC2622) oligomerizes through interactions involving conserved residues in the N0 domain and residues 42-49 within the flexible N-terminal region and that these homotropic interactions can persist in the presence of heterotropic interactions with VirB9. Finally, we propose that VirB(7XAC2622) oligomerization is compatible with the core complex structure in a manner such that the N0 domains form an extra layer on the perimeter of the tetradecameric ring.

Synthèse et caractérisation physicochimique de peptides de polyglutamines

Neuf maladies neurodégénératives sont le produit de l’expression de gènes mutés, dans lesquels le codon CAG est répété au-delà d’un seuil pathologique. Ceci produit des protéines mutantes dans lesquelles sont insérés des segments de polyglutamines (polyGln), qui perdent leur activité et acquièrent une nouvelle fonction, ce qui est toxique pour le neurone. Ces altérations sont attribuables aux propriétés particulières de la polyGln. En effet, ces dernières possèdent la capacité de s’assembler pour former des corps d’inclusion intracellulaires. Cette propension à l’agrégation de la polyGln rend difficile l’étude de ces pathologies. C’est ainsi que l’utilisation de peptides peut s’avérer une approche avantageuse. Toutefois, la synthèse de polyGln est associée à de nombreuses délétions et nécessite l’ajout de groupements chargés afin de permettre leur purification. Cependant, ce prérequis donne lieu à des interactions électrostatiques qui biaisent la structure et la cinétique d’agrégation de ces peptides, en plus d’interférer avec l’évaluation d’éventuels agents thérapeutiques. L’objectif du projet est de développer un système permettant l’étude de la polyGln en s’affranchissant des effets de charges. Pour ce faire, deux approches ont été explorées, la première utilise la polyGln non chargée et la seconde utilise une structure polyGln-morpholine ayant des charges labiles en fonction du pH. Ces peptides ont été produits en utilisant une approche linéaire de synthèse peptidique sur support solide avec protection maximale des chaînes latérales. La purification a été effectuée par chromatographie de haute performance en phase inverse en milieu acide. Ces stratégies ont permis de produire des peptides de polyGln de grande pureté avec des rendements acceptables. Une procédure de solubilisation des peptides alliant sonication et lyophilisation a été développée afin d’étudier chacun de ces peptides à l’aide de diverses techniques physicochimiques, telles que la diffusion de la lumière, la spectroscopie de résonance magnétique nucléaire, Raman et UV-visible, le dichroïsme circulaire et la microscopie optique polarisée. La polyGln non chargée solubilisée dans le trifluoroéthanol-eau a montré que la taille des particules et la vitesse d’agrégation sont proportionnelles à la fraction volumique en eau. De plus, la structure secondaire en solution est à prédominance alpha et semble être peu sensible à la fraction d’eau jusqu’à un certain seuil (25%) après lequel la structure aléatoire prédomine. L’analyse des agrégats à l’état solide montre des structures hélicoïdales > aléatoires et ont les caractéristiques des fibrilles amyloïdes. Le peptide de polyGln-morpholines a un pKa de 7,3 en milieu aqueux. Il demeure en solution lorsque le pH < pKa et à faible force ionique, alors qu’il s’autoassemble lorsque ces conditions ne sont pas respectées. Ceci suggère que la répulsion électrostatique est responsable de la stabilisation du peptide en solution. La dimension fractale nous indique que le peptide forme des agrégats compacts dont les constituants ont une taille de 2,5 nm, compatibles avec une conformation aléatoire compacte, en coude bêta ou hélicoïdale. Ceci est en accord avec l’étude structurale des peptides en solution qui a montré des espèces aléatoires > bêta > alpha. De plus, en RMN, l’élargissement des signaux du 1Hγ en cours d’agrégation suggère une interaction via les chaînes latérales. Les analyses en phase solide ont plutôt montré une prédominance de structures bêta et alpha. L’inhibition de l’agrégation à pH 8 varie selon rouge de Congo > tréhalose, alors que le peptide liant la polyGln 1 et la thioflavine T ne semble pas avoir d’effet. Ces approches ont donc permis pour la première fois de s’affranchir des effets de charges auparavant inhérents à l’étude de la polyGln en solution et par conséquent d’obtenir des informations inédites quant à la solubilité, la structure et la cinétique d’agrégation. Enfin, le dispositif à charges labiles permet d’évaluer l’efficacité d’éventuels agents thérapeutiques à pH quasi physiologique.

Préparation, étude de l’orientation et caractérisation physico-chimique de films polymères comportant des fluorophores

Les propriétés intrinsèques, photophysiques, électrochimiques et cristallographiques des molécules fluorescentes 4,4'-bis(2-benzoxazolyle)stilbène (BBS) et 2,5-bis(5-tert-butyl-2-benzoxazolyle)thiophène (BBT) ont été étudiées en solution et dans les polymères semi-cristallins : poly(butylène succinate) (PBS) et polylactide (PLA). Les deux fluorophores sont caractérisés par de hauts rendements quantiques absolus de fluorescence. Toutefois, une désactivation de la fluorescence peut se produire par croisement intersystème vers l'état triplet pour le BBT, et par photoisomérisation trans-cis pour le BBS. La cinétique de ce dernier processus dépend de la concentration, résultant en un pur isomère cis photo-induit à faibles concentrations, qui est accompagné à des concentrations élevées par l'apparition d'un composé acide après photo-clivage suivi d'une oxydation. Cette étude a révélé des changements spectroscopiques prononcés suite à l’augmentation de la concentration des fluorophores, en particulier à l'état solide, spécifiques à l'agrégation des molécules à l'état fondamental pour le BBT et à la formation d’excimères pour le BBS, permettant ainsi de corréler les propriétés fluorescentes avec les caractéristiques du monocristal pour chaque fluorophore. En outre, le passage d’une dispersion moléculaire à une séparation de phases dans le cas du BBS est accompagné d'un changement de couleur du bleu au vert, qui est sensible à la déformation, à la température et au temps, affectant les rendements quantiques absolus de fluorescence et fournissant une large opportunité à la création d'une grande variété de polymères intelligents indicateurs capables d'auto-évaluation. D’autre part, la solubilité élevée du BBT dans les solvants courants, combinée à ses propriétés optoélectroniques élevées, en font un candidat en tant que référence universelle de fluorescence et matériau intelligent à la fois pour les études de polymères et en solution. Similairement aux mélanges comprenant des polymères miscibles, l'orientation du PBS augmente après ajout d'une molécule fluorescente, dont les monomères ont tendance à être orientés dans des films étirés, contrairement aux excimères ou agrégats.

Structural characterisation of bisintercalation in higher-order DNA at a junction-like quadruplex

We report the single-crystal X-ray structure for the complex of the bisacridine bis-(9-aminooctyl(2-(dimethylaminoethyl)acridine-4-carboxamide)) with the oligonucleotide d(CGTACG)2 to a resolution of 2.4 Å. Solution studies with closed circular DNA show this compound to be a bisintercalating threading agent, but so far we have no crystallographic or NMR structural data conforming to the model of contiguous intercalation within the same duplex. Here, with the hexameric duplex d(CGTACG), the DNA is observed to undergo a terminal cytosine base exchange to yield an unusual guanine quadruplex intercalation site through which the bisacridine threads its octamethylene linker to fuse two DNA duplexes. The 4-carboxamide side-chains form anchoring hydrogen-bonding interactions with guanine O6 atoms on each side of the quadruplex. This higher-order DNA structure provides insight into an unexpected property of bisintercalating threading agents, and suggests the idea of targeting such compounds specifically at four-way DNA junctions.

Molecular recognition between functionalized gold nanoparticles and healable, supramolecular polymer blends – a route to property enhancement

A new, healable, supramolecular nanocomposite material has been developed and evaluated. The material comprises a blend of three components: a pyrene-functionalized polyamide, a polydiimide and pyrenefunctionalized gold nanoparticles (P-AuNPs). The polymeric components interact by forming well-defined p–p stacked complexes between p-electron rich pyrenyl residues and p-electron deficient polydiimide residues. Solution studies in the mixed solvent chloroform–hexafluoroisopropanol (6 : 1, v/v) show that mixing the three components (each of which is soluble in isolation), results in the precipitation of a supramolecular, polymer nanocomposite network. The precipitate thus formed can be re-dissolved on heating, with the thermoreversible dissolution/precipitation procedure repeatable over at least 5 cycles. Robust, self-supporting composite films containing up to 15 wt% P-AuNPs could be cast from 2,2,2- trichloroethanol. Addition of as little as 1.25 wt% P-AuNPs resulted in significantly enhanced mechanical properties compared to the supramolecular blend without nanoparticles. The nanocomposites showed a linear increase in both tensile moduli and ultimate tensile strength with increasing P-AuNP content. All compositions up to 10 wt% P-AuNPs exhibited essentially quantitative healing efficiencies. Control experiments on an analogous nanocomposite material containing dodecylamine-functionalized AuNPs (5 wt%) exhibited a tensile modulus approximately half that of the corresponding nanocomposite that incorporated 5 wt% pyrene functionalized-AuNPs, clearly demonstrating the importance of the designed interactions between the gold filler and the supramolecular polymer matrix.

Estudos das propriedades estruturais de análogos substituídos com 'TRP POT.2,7 ou 24' do fragmento com 30 resíduos da região amino-terminal da Esticolisina II

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Approach to carbon dioxide capture and storage at ambient conditions

Carbon dioxide (CO2) capture and storage experiments were conducted at ambient conditions in varying weight % sodium carbonate (Na2CO3) solutions. Experiments were conducted to determine the optimal amount of Na2CO3 in solution for CO2 absorption. It was concluded that a 2% Na2CO3 solution, by weight, was the most efficient solution. The 2% Na2CO3 solution is able to absorb 0.5 g CO2/g Na2CO3. These results led to studies to determine how the gas bubble size affected carbon dioxide absorption in the solution. Studies were conducted using ASTM porosity gas diffusers to vary the bubble size. Gas diffusers with porosities of fine, medium, and extra coarse were used. Results found that the medium porosity gas diffuser was the most efficient at absorbing CO2 at 50%. Variation in the bubble size concluded that absorption of carbon dioxide into the sodium carbonate solution does depend on the bubble size, thus is mass transfer limited. Once the capture stage was optimized (amount of Na2CO3 in solution and bubble size), the next step was to determine if carbon dioxide could be stored as a calcium carbonate mineral using calcium rich industrial waste and if the sodium carbonate solution could be simultaneously regenerated. Studies of CO2 sequestration at ambient conditions have shown that it is possible to permanently sequester CO2 in the form of calcium carbonate using a calcium rich industrial waste. Studies have also shown that it is possible to regenerate a fraction of the sodium carbonate solution.

Crystal structure of Taq DNA polymerase in complex with an inhibitory Fab: The Fab is directed against an intermediate in the helix-coil dynamics of the enzyme

We report the crystal structure of Thermus aquaticus DNA polymerase I in complex with an inhibitory Fab, TP7, directed against the native enzyme. Some of the residues present in a helical conformation in the native enzyme have adopted a γ turn conformation in the complex. Taken together, structural information that describes alteration of helical structure and solution studies that demonstrate the ability of TP7 to inhibit 100% of the polymerase activity of the enzyme suggest that the change in conformation is probably caused by trapping of an intermediate in the helix-coil dynamics of this helix by the Fab. Antibodies directed against modified helices in proteins have long been anticipated. The present structure provides direct crystallographic evidence. The Fab binds within the DNA binding cleft of the polymerase domain, interacting with several residues that are used by the enzyme in binding the primer:template complex. This result unequivocally corroborates inferences drawn from binding experiments and modeling calculations that the inhibitory activity of this Fab is directly attributable to its interference with DNA binding by the polymerase domain of the enzyme. The combination of interactions made by the Fab residues in both the polymerase and the vestigial editing nuclease domain of the enzyme reveal the structural basis of its preference for binding to DNA polymerases of the Thermus species. The orientation of the structure-specific nuclease domain with respect to the polymerase domain is significantly different from that seen in other structures of this polymerase. This reorientation does not appear to be antibody-induced and implies remarkably high relative mobility between these two domains.

Managing the multiplicities of graduate level education! Are Master’s students’ expectations matched by their experiences?

With rapid increases in student fees reflecting moves towards a QUASI Market model of Higher Education in the UK and across much of the Western World[1], many universities find themselves having to meet progressively higher levels of student expectations[2]. This is particularly the case at undergraduate level, where increases in fees over the past decade have far exceeded inflation. Yet with so much attention on ‘consumer savvy’ undergraduates, the question of whether Master’s level students’ expectations are matched by their experiences is one which remains largely unanswered. Grounded in an empirically grounded approach to learning and teaching developed by the paper authors[3], this paper sets out to being to answer this question. In doing so it makes a distinctive contribution to debates about graduate level engineering education and concludes with a number of recommendations. Discussion: The ‘MSc: Managing Expectations’ Project analyses the expectations and experiences of Graduate level Engineering Management Students over a two year period. Focusingon the ‘student experience’, three main concepts are identified as being particular relevant to enhancing learning [3]: Relationships: Variety: Synergy. Relationships: Based on empirical research, the significance of Relationships within the academic environment is discussed with particular attention being paid to the value of students’ social and academic support networks, including academic tutoring. Variety: Grounded in a statistical analysis of ‘engagement data’ together with survey and interview findings, the concept of variety critically examines students’ perspectives and experiencesof different approaches to learning and teaching. Synergy: Possibly the most important concept discussed within this paper, the need for constructively aligned curriculum is extended to reflect the students’ apriori knowledge and experienceas well as employer and societal demands and expectations. The conclusion brings the different concepts within the discussion together, providing a set of practical recommendations for colleagues working both at graduate and undergraduate level. References 1.Gibbs, P. (2001) "Higher education as a market: a problem or solution?." Studies in Higher Education 26. 1. pp. 85-94. 2.Tricker, T., (2005) Student Expectations-How do we measure up. University of Sheffield. Available from: http://www.persons.org.uk/tricker%20paper.pdf Accessed 9/10/14 3.Clark, R. & Andrews, J. (2014). Relationships, Variety & Synergy [RVS]: The Vital Ingredients for Scholarship in Engineering Education? A Case-Study. European Journal of Engineering Education. 39.6. pp. 585-600.

Generation of Naphthoquinone Radical Anions by Electrospray Ionization: Solution, Gas-Phase, and Computational Chemistry Studies

Radical anions are present in several chemical processes, and understanding the reactivity of these species may be described by their thermodynamic properties. Over the last years, the formation of radical ions in the gas phase has been an important issue concerning electrospray ionization mass spectrometry studies. In this work, we report on the generation of radical anions of quinonoid compounds (Q) by electrospray ionization mass spectrometry. The balance between radical anion formation and the deprotonated molecule is also analyzed by influence of the experimental parameters (gas-phase acidity, electron affinity, and reduction potential) and solvent system employed. The gas-phase parameters for formation of radical species and deprotonated species were achieved on the basis of computational thermochemistry. The solution effects on the formation of radical anion (Q(center dot-)) and dianion (Q(2-)) were evaluated on the basis of cyclic voltammetry analysis and the reduction potentials compared with calculated electron affinities. The occurrence of unexpected ions [Q + 15](-) was described as being a reaction between the solvent system and the radical anion, Q(center dot-).The gas-phase chemistry of the electrosprayed radical anions was obtained by collisional-induced dissociation and compared to the relative energy calculations. These results are important for understanding the formation and reactivity of radical anions and to establish their correlation with the reducing properties by electrospray ionization analyses.

One pot obtention of a tetrabutylammonium hydroxide solution for ironporphyrin-OH- interaction studies in organic solvents

In this work we report the obtention of a tetrabutylammonium hydroxide (TBAOH) solution in acetonitrile in a one pot process in order to study the interaction ironporphyrinOH- in non-aqueous systems. All the reactions were carried out under dry argon atmosphere to prevent the contamination of the solution with CO2, which leads to the formation of (TBA)2CO3.

Equilibrium studies of 2,2'-(5-bromo-6-methylpyrimidine-2,4-diyl)bis(azanediyl)dipropanoic acid with some transition-metal ions in aqueous solution

The stability constants of the 1:1 complexes formed between M2+ (M2+: Mn2+, Ni2+, Cu2+, or Cd2+) and BMADA2- (BMADA: 2,2'-(5-bromo-6-methylpyrimidine-2,4 diyl)bis(azanediyl)dipropanoic acid) were determined by potentiometric pH titration in aqueous solution (I = 0.1 mol L-1, NaNO3, 25 °C). The stability of the binary M - BMADA complexes is determined by the basicity of the carboxyl or amino groups. All the stability constants reported in this work exhibit the usual trend, and the order obtained was Mn2+< Ni2+ < Cu2+ > Cd2+. The observed stability order for BMADA approximately follows the Irving - Williams sequence. In the M - BMADA complexes, the M ion is able to form a macrochelate via the pyrimidine group of BMADA.

Adsorption isotherm studies of Cd (II), Pb (II) and Zn (II) ions bioremediation from aqueous solution using unmodified and EDTA-modified maize cob

The need to clean-up heavy metal contaminated environment can not be over emphasized. This paper describes the adsorption isotherm studies of Cd (II), Pb (II) and Zn (II) ions from aqueous solution using unmodified and EDTA-modified maize cob. Maize cob was found to be an excellent adsorbent for the removal of these metal ions. The amount of metal ions adsorbed increased as the initial concentration increased. Also, EDTA - modification enhanced the adsorption capacity of maize cob probably due to the chelating ability of EDTA. Among the three adsorption isotherm tested, Dubinin-Radushkevich gave the best fit with R² value ranging from 0.9539 to 0.9973 and an average value of 0.9819. This is followed by Freundlich isotherm (Ave. 0.9783) and then the Langmuir isotherm (Ave. 0.7637). The sorption process was found to be a physiosorption process as seen from the apparent energy of adsorption which ranged from 2.05KJ\mol to 4.56KJ\mol. Therefore, this study demonstrates that maize cob which is an environmental pollutant could be used to adsorb heavy metals and achieve cleanliness thereby abating environmental nuisance caused by the maize cob.