Soil mineralogy of mangrove forests from the state of Sao Paulo, Southeastern Brazil

The minerals of the clay fraction in estuarine plains are mainly detrital being a mixture of marine and continental sediments, but can also be authigenic. Because of the importance of mangrove ecosystems in tropical estuarine areas and the relatively few existing studies of the mineralogical composition of soils in these environments, the aim of this study was to determine the mineralogical assemblage and identify potential contrasts along the coast of the State of Sao Paulo. Soils from I I mangroves distributed along the coastal plain of the State of Sao Paulo were sampled at depths of 0 to 20 and 60 to 80 cm, and samples of suspended sediments from the Ribeira do Iguape River were collected for analysis. Mineralogical analyses were performed on the clay and silt fractions by x-ray diffraction (XRD) and transmission electron microscopy, and fresh soil samples were analyzed by scanning electron microscopy-energy dispersive spectrometry and suspended sediments by XRD. The silt fraction contained quartz, feldspars, gibbsite, kaolinite, illite, and vermiculite, and the clay fraction contained smectite, kaolinite, illite, gibbsite, quartz, and feldspars. Locally, vermiculite, biotite, anatase, halloysite, and goethite may occur because of recent transport of sediments to the system. Pyrite was identified in fresh samples. The allochthonous minerals found either were terrestrial and transported by rivers or had originated from the continental platform by past transgressive events. We suggest that the neoformation of smectite and kaolinite occurs in mangrove soils. Different geomorphological settings along the Sao Paulo coast appear to regulate mineral distribution in mangrove soils.

A new data set of soil mineralogy for dust-cycle modeling

The mineralogy of airborne dust affects the impact of dust particles on direct and indirect radiative forcing, on atmospheric chemistry and on biogeochemical cycling. It is determined partly by the mineralogy of the dust-source regions and partly by size-dependent fractionation during erosion and transport. Here we present a data set that characterizes the clay and silt-sized fractions of global soil units in terms of the abundance of 12 minerals that are important for dust–climate interactions: quartz, feldspars, illite, smectite, kaolinite, chlorite, vermiculite, mica, calcite, gypsum, hematite and goethite. The basic mineralogical information is derived from the literature, and is then expanded following explicit rules, in order to characterize as many soil units as possible. We present three alternative realizations of the mineralogical maps, taking the uncertainties in the mineralogical data into account. We examine the implications of the new database for calculations of the single scattering albedo of airborne dust and thus for dust radiative forcing.

Spatial patterns of soil attributes and components in a mangrove system in Southeast Brazil (Sao Paulo)

Purpose Among environmental factors governing innumerous processes that are active in estuarine environments, those of edaphic character have received special attention in recent studies. With the objectives of determining the spatial patterns of soil attributes and components across different mangrove forest landscapes and obtaining additional information on the cause-effect relationships between these variables and position within the estuary, we analyzed several soil attributes in 31 mangrove soil profiles from the state of So Paulo (Guaruja, Brazil). Materials and methods Soil samples were collected at low tide along two transects within the CrumahA(0) mangrove forest. Samples were analyzed to determine pH, Eh, salinity, and the percentages of sand, silt, clay, total organic carbon (TOC), and total S. Mineralogy of the clay fraction (< 2 mm) was also studied by X-ray diffraction analysis, and partitioning of solid-phase Fe was performed by sequential extraction. Results and discussion The results obtained indicate important differences in soil composition at different depths and landscape positions, causing variations in physicochemical parameters, clay mineralogy, TOC contents, and iron geochemistry. The results also indicate that physicochemical conditions may vary in terms of different local microtopographies. Soil salinity was determined by relative position in relation to flood tide and transition areas with highlands. The proportions of TOC and total S are conditioned by the sedimentation of organic matter derived from vegetation and by the prevailing redox conditions, which clearly favored intense sulfate reduction in the soils (similar to 80% of the total Fe is Fe-pyrite). Particle-size distribution is conditioned by erosive/deposition processes (present and past) and probably by the positioning of ancient and reworked sandy ridges. The existing physicochemical conditions appear to contribute to the synthesis (smectite) and transformation (kaolinite) of clay minerals. Conclusions The results demonstrate that the position of soils in the estuary greatly affects soil attributes. Differences occur even at small scales (meters), indicating that both edaphic (soil classification, soil mineralogy, and soil genesis) and environmental (contamination and carbon stock) studies should take such variability into account.

Chemical dispersants and pre-treatments to determine clay in soils with different mineralogy

Knowledge of the soil physical properties, including the clay content, is of utmost importance for agriculture. The behavior of apparently similar soils can differ in intrinsic characteristics determined by different formation processes and nature of the parent material. The purpose of this study was to assess the efficacy of separate or combined pre-treatments, dispersion methods and chemical dispersant agents to determine clay in some soil classes, selected according to their mineralogy. Two Brazilian Oxisols, two Alfisols and one Mollisol with contrasting mineralogy were selected. Different treatments were applied: chemical substances as dispersants (lithium hydroxide, sodium hydroxide, and hexametaphosphate); pre-treatment with dithionite, ammonium oxalate, and hydrogen peroxide to eliminate organic matter; and coarse sand as abrasive and ultrasound, to test their mechanical action. The conclusion was drawn that different treatments must be applied to determine clay, in view of the soil mineralogy. Lithium hydroxide was not efficient to disperse low-CEC electropositive soils and very efficient in dispersing high-CEC electronegative soils. The use of coarse sand as an abrasive increased the clay content of all soils and in all treatments in which dispersion occurred, with or without the use of chemical dispersants. The efficiency of coarse sand is not the same for all soil classes.

Biology as an agent of chemical and mineralogical change in soil

Earthworms have a significant impact on the functioning of soils and the processes that occur within them. Here we review our work on the impact of earthworms on soil mineralogy and chemistry, in particular focusing on the contribution of earthworms to mineral weathering and calcium carbonate in soils and the impact that earthworms have on metal mobility at contaminated sites.

Global assessment of soil phosphorus retention potential

Limited availability of P in soils to crops may be due to deficiency and/or severe P retention. Earlier studies that drew on large soil profile databases have indicated that it is not (yet) feasible to present meaningful values for "plant-available" soil P, obtained according to comparable analytical methods, that may be linked to soil geographical databases derived from 1:5 million scale FAO Digital Soil Map of the World, such as the 5 x 5 arc-minute version of the ISRIC-WISE database. Therefore, an alternative solution for studying possible crop responses to fertilizer-P applied to soils, at a broad scale, was sought. The approach described in this report considers the inherent capacity of soils to retain phosphorus (P retention), in various forms. Main controlling factors of P retention processes, at the broad scale under consideration, are considered to be pH, soil mineralogy, and clay content. First, derived values for these properties were used to rate the inferred capacity for P retention of the component soil units of each map unit (or grid cell) using four classes (i.e., Low, Moderate, High, and Very High). Subsequently, the overall soil phosphorus retention potential was assessed for each mapping unit, taking into account the P-ratings and relative proportion of each component soil unit. Each P retention class has been assigned to a likely fertilizer P recovery fraction, derived from the literature, thereby permitting spatially more detailed, integrated model-based studies of environmental sustainability and agricultural production at the global and continental level (< 1:5 million). Nonetheless, uncertainties remain high; the present analysis provides an approximation of world soil phosphorus retention potential.

Dielectric constant obtained from TDR and volumetric moisture of soils in southern Brazil

Soil moisture is the property which most greatly influences the soil dielectric constant, which is also influenced by soil mineralogy. The aim of this study was to determine mathematical models for soil moisture and the dielectric constant (Ka) for a Hapludalf, two clayey Hapludox and a very clayey Hapludox and test the reliability of universal models, such as those proposed by Topp and Ledieu and their co-workers in the 80's, and specific models to estimate soil moisture with a TDR. Soil samples were collected from the 0 to 0.30 m layer, sieved through a mesh of 0.002 m diameter and packed in PVC cylinders with a 0.1 m diameter and 0.3 m height. Seven samples of each soil class were saturated by capillarity and a probe composed of two rods was inserted in each one of them. Moisture readings began with the saturated soil and concluded when the soil was near permanent wilting point. In each step, the samples were weighed on a precision scale to calculate volumetric moisture. Linear and polynomial models were adjusted for each soil class and for all soils together between soil moisture and the dielectric constant. Accuracy of the models was evaluated by the coefficient of determination, the standard error of estimate and the 1:1 line. The models proposed by Topp and Ledieu and their co-workers were not adequate for estimating the moisture in the soil classes studied. The adjusted linear and polynomial models for the entire set of data of the four soil classes did not have sufficient accuracy for estimating soil moisture. The greater the soil clay and Fe oxide content, the greater the dielectric constant of the medium for a given volumetric moisture. The specific models, θ = 0.40283 - 0.04231 Ka + 0.00194 Ka² - 0.000022 Ka³ (Hapludox) θ = 0.01971 + 0.02902 Ka - 0.00086 Ka² + 0.000012 Ka³ (Hapludox -PF), θ = 0.01692 - 0.00507 Ka (Hapludalf) and θ = 0.08471 + 0.01145 Ka (Hapludox-CA), show greater accuracy and reliability for estimating soil moisture in the soil classes studied.

Planosols Developed in Different Geoenvironmental Conditions in Northeastern Brazil

ABSTRACT The semiarid region of northeastern Brazil has a large area occupied by Planosols, where in the State of Pernambuco these soils are mainly used for livestock farming and subsistence crops. The knowledge on these soils is limited, which compromises the understanding on their behavior, potentialities and limitations.This study aimed to analyze morphological, chemical, physical and mineralogical attributes of Planosols developed under different geoenvironmental conditions. Morphological descriptions and chemical, physical and mineralogical analyses were performed in four profiles of Planosols along a rainfall gradient. An increase in rainfall allowed for an increase in the clay content in the Bt horizon and a reduction in ESP, EC, Na+, CEC, S, pH (water and KCl) and soil density. Horizons A and E were thicker in Planosols in more humid environments. The increase in ESP associated with the presence of expansive minerals (smectite and vermiculite) allowed the development of a prismatic structure in Haplic Planosols and a columnar structure in Natric Planosols. The mineralogical assembly is indicative of poorly weathered soils. The mineralogical assemblies of the silt and clay fractions were similar in the different geoenvironments, while higher contents of easily alterable minerals were observed in the composition of the sand fraction in environments with a drier climate.

Selenium cycling in volcanic environments: the role of soils as reactive interfaces

Selenium (Se) is an element with important health implications that is emitted in significant amounts from volcanoes. Attracted by the fertility of volcanic soils, around 10% of the world population lives within 100 km of an active volcano. Nevertheless, the behaviour of Se in volcanic environments is poorly understood. Therefore, the main aim of this thesis is to investigate the role of soils in the Se cycling in volcanic environments. Prior to the geochemical studies, precise and accurate methods for the determination of Se contents, speciation and isotopic signatures were developed. Afterwards, a combination of field studies and lab controlled experiments were performed with soils from two contrasting European volcanic settings: Mount Etna in Sicily (Italy) and Mount Teide in Tenerife (Spain). The results showed a strong link between Se behaviour and soil development, indicating that Se mobility in volcanic soils is controlled by sorption processes and soil mineralogy.

Caracterização mineralógica de Latossolos em diferentes feições do relevo na região de Jaboticabal, SP

Different surface land form expressed by the relief can cause variations in soil properties in different magnitudes, depending mainly on a specific location in the landscape. Therefore, the objective of this study was to make the mineralogical characterization of Oxisols in different relief forms in the region of Jaboticabal, SP. Three trenches were opened in the convex, linear and concave landforms, done morphological description of the soil horizons and collected soil samples for physical, chemical and mineralogical characterization. It was found that the oxidic mineralogy is dependent on the type of landform, with the dominance of goethite on the concave landform and hematite on the linear landform. The desferrific clay minerals exhibited dominance of gibbsite in the concave, compared to convex and linear landforms that were dominated by the kaolinitic mineralogy.

Mineralogia de uma topossequência de solos desenvolvidos de material holocênico da região de Jequitaí, Estado de Minas Gerais

A região da Serra da Onça é localizada no nordeste do Estado de Minas Gerais, no vale formado pelos trabalhos dos rios São Francisco e seus afluentes Jequitaí e Rio das Velhas. Esta região é caracterizada por diversos ciclos erosivos. Uma topossequência representativa da área foi escolhida para este estudo, sendo constituida por 5 perfis de solos desenvolvidos de sedimentos Quaternários. 0 Perfil 1, um Typic Hapleustox, está localizado na superfície mais antiga. Os outros solos estão localizados no sedimento Holocênico, área aluvial do São Francisco. Estes solos são menos intemperizados e classificados como Plíntic Haplustult (Perfil 2), Oxic Plintaquult (Perfil 3); Fluventic Plinthustult (Perfil 4) e Fluventic Argiustol (Perfil 5). Análises mineralógicas foram efetuadas em todas as fraçõs do solo. O Perfil 1 apresenta, em sua fração areia, somente minerais resistentes ao intemperismo, enquanto que nos demais solos, menos intemperizados, ocorrem micas e plagioclásios. Tais minerais aumentam de acordo com a profundidade do solo e também do Perfil 1 ao Perfil 5 menos intemperizado. A caulinita é o mineral de argila dominante na fração argila de todos os solos estudados, com maior concentração no Perfil 1, mais intemperizado. Este mineral tende a decrescer em profundidade e na direção do Perfil 1. Micas, vermiculita e montmorilonita também ocorrem do Perfil 2 ao Perfil 5.

Relação entre fisiografia e solos desenvolvidos de material cenozoico da região do rio Jequitai, MG

É estudado o relacionamento entre a fisiografia e os solos evoluídos a partir de sedimentos cenozóicos, de textura e composição variáveis, depositados sob a ação do rio São Francisco e tributários. A região (vale do rio Jequitai, MG) é caracterizada por um clima sub-úmido, onde o regime de umidade do solo é ústico e o de temperatura isotérmico. Foram coletados 5 pedons dispostos numa topossequência. Na posição mais antiga (pleistocênica), o solo apresenta-se em um estágio de intensa alteração (Typic Haplustox). Os demais solos encontram-se sobre sedimentos holocênicos, compondo a planície aluvial do rio São Francisco e são, mineralogicamente, mais jovens, com horizonte argílico, representado por ultissol e molissol, ocorrência esta pouco comum em situações de planície aluvial recente. No pedon 1 (Typic Haplustox), os minerais primários intemperizáveis inexistem na fração grosseira. O pedon 2 (Plinthic Haplustult) apresenta na fração areia um acréscimo em profundidade de minerais de fácil alteração. Na fração silte, os feldspatos já estão em fase de alteração. Os pedons 3 (Oxic Plintaquult), 4 (Fluventic Plinthustult) e 5 (Fluventic Argiustol) mostram elevadas proporções de minerais primários de fácil alteração (placioclásios calco-sódicos, hornblenda), principalmente nas frações areia e silte. A ocorrência destes minerais associa-se a um processo deposicional recente, aliado às condições de clima e drenagem locais.