Social License to Operate: Hydraulic Fracturing-Related Challenges Facing the Oil & Gas Industry

The crossroads of urban development and improved technology allowing oil and gas development in new areas can result in contentious community issues. The debate over one of the improved technologies – i.e., hydraulic fracturing – can be highly emotional. Consequently, industry must address community issues, earning trust and therefore a “social license to operate.” This paper provides fundamental knowledge of the social license to operate concept, validates its application to the oil and gas industry, particularly with respect to shale gas development, discusses the current status of social license in the unconventional development sphere, analyzes current ongoing efforts for shale gas developers to monitor and establish a social license, and identifies potential new methods of encouraging, establishing, and monitoring a social license to operate. The paper also proposes a new institutional framework in which to promote the social license to operate, “The Center for Social License to Operate in the Oil & Gas Industry.”

EVALUATING THE OIL SANDS RECLAMATION PROCESS: ASSESSING POLICY CAPACITY AND STAKEHOLDER ACCESS FOR GOVERNMENT AND NON-GOVERNMENTAL ORGANIZATIONS OPERATING IN ALBERTA’S OIL SANDS

By employing interpretive policy analysis this thesis aims to assess, measure, and explain policy capacity for government and non-government organizations involved in reclaiming Alberta's oil sands. Using this type of analysis to assess policy capacity is a novel approach for understanding reclamation policy; and therefore, this research will provide a unique contribution to the literature surrounding reclamation policy. The oil sands region in northeast Alberta, Canada is an area of interest for a few reasons; primarily because of the vast reserves of bitumen and the environmental cost associated with developing this resource. An increase in global oil demand has established incentive for industry to seek out and develop new reserves. Alberta's oil sands are one of the largest remaining reserves in the world, and there is significant interest in increasing production in this region. Furthermore, tensions in several oil exporting nations in the Middle East remain unresolved, and this has garnered additional support for a supply side solution to North American oil demands. This solution relies upon the development of reserves in both the United States and Canada. These compounding factors have contributed to the increased development in the oil sands of northeastern Alberta. Essentially, a rapid expansion of oil sands operations is ongoing, and is the source of significant disturbance across the region. This disturbance, and the promises of reclamation, is a source of contentious debates amongst stakeholders and continues to be highly visible in the media. If oil sands operations are to retain their social license to operate, it is critical that reclamation efforts be effective. One concern non-governmental organizations (NGOs) expressed criticizes the current monitoring and enforcement of regulatory programs in the oil sands. Alberta's NGOs have suggested the data made available to them originates from industrial sources, and is generally unchecked by government. In an effort to discern the overall status of reclamation in the oil sands this study explores several factors essential to policy capacity: work environment, training, employee attitudes, perceived capacity, policy tools, evidence based work, and networking. Data was collected through key informant interviews with senior policy professionals in government and non-government agencies in Alberta. The following are agencies of interest in this research: Canadian Association of Petroleum Producers (CAPP); Alberta Environment and Sustainable Resource Development (AESRD); Alberta Energy Regulator (AER); Cumulative Environmental Management Association (CEMA); Alberta Environment Monitoring, Evaluation, and Reporting Agency (AEMERA); Wood Buffalo Environmental Association (WBEA). The aim of this research is to explain how and why reclamation policy is conducted in Alberta's oil sands. This will illuminate government capacity, NGO capacity, and the interaction of these two agency typologies. In addition to answering research questions, another goal of this project is to show interpretive analysis of policy capacity can be used to measure and predict policy effectiveness. The oil sands of Alberta will be the focus of this project, however, future projects could focus on any government policy scenario utilizing evidence-based approaches.

Quand faut-il opérer une fracture diaphysaire de l'humérus [When to operate humeral shaft fractures?].

Most humeral shaft fractures are amenable to nonoperative treatment. According to shoulder and elbow functions, humeral shaft malunions are well tolerated with deformities up to 30 degrees of varus, 20 degrees of anterior bowing and 15 degrees of internal rotation. Limitations to nonoperative treatment do exist. Open fractures with extensive soft-tissue lesions, penetrating open fractures with neurological or vascular impairment are best managed with immediate stabilization. However the appropriate treatment strategy has to be adapted for each patient. Patient expectations, fracture propensity for nonunion, ability to tolerate nonoperative treatment for medical or social reasons should be taken into consideration for operative indication.

Comparison and analysis of corporate social responsibility (CSR) reports of the top five companies ranked on the 2013 CSR RepTrak

In the 1970s, Corporate Social Responsibility (CSR) was discussed by Nobel laureate Milton Friedman in his article “The Social Responsibility of Business Is to Increase Its Profits.” (Friedman, 1970). His view on CSR was contemptuous as he referred to it as “hypocritical window-dressing” a reflection of the view of Corporate America on CSR back then. For a long time short-term maximization of shareholder value was the only maxim for top management across industries and companies. Over the last decade, CSR has become a more important and relevant factor of a company’s reputation, shifting the discussion from whether CSR is necessary to how best CSR commitments should be done (Smith, 2003). Inevitably, companies do have an environmental, social and economic impact, thereby imposing social costs on current and future generations. In 2013, 50 of the world biggest companies have been responsible for 73 percent of the total carbon dioxide (CO2) emission (Global 500 Climate Change Report 2013). Post et al. (2002) refer to these social costs as a company’s need to retain its “license to operate”. In the late 1990s, CSR reporting was nearly unknown, which drastically changed during the last decade. Allen White, co-founder of the Global Reporting Initiative (GRI), said that CSR reporting”… has evolved from the extraordinary to the exceptional to the expected” (Confino, 2013). In confirmation of this, virtually all of the world’s largest 250 companies report on CSR (93%) and reporting by now appears to be business standard (KPMG, 2013). CSR reports are a medium for transparency which may lead to an improved company reputation (Noked, 2013; Thorne et al, 2008; Wilburn and Wilburn, 2013). In addition, it may be used as part of an ongoing shareholder relations campaign, which may prevent shareholders from submitting Environmental and Social (E&S)1 proposals (Noked, 2013), based on an Ernst & Young report 1 The top five E&S proposal topic areas in 2013 were: 1. Political spending/ lobbying; 2. Environmental sustainability; 3. Corporate diversity/ EEO; 4.Labor/ human rights and 5. Animal testing/ animal welfare. Three groups of environmental sustainability proposal topics of sub-category number two (environmental sustainability) 6 2013, representing the largest category of shareholder proposals submitted. PricewaterhouseCoopers (PwC) even goes as far as to claim that CSR reports are “…becoming critical to a company’s credibility, transparency and endurance.” (PwC, 2013).

Social media to support collaboration in the product life cycle of SMEs

Abstract : The use of social media tools to support small and medium-sized enterprises (SME) to support their business activities throughout the product life cycle (PLC) phases represents an interesting opportunity. SMEs operate in very competitive environments, and face significant challenges primarily caused by their size disadvantage. By nature, social media tools and platforms can enable them to overcome some of these challenges, as they are often very inexpensive, familiar and easy to use, allowing them to reach large audiences they would not be able to reach with traditional and expensive marketing initiatives. To provide solutions to this problem, this research identified three main objectives. The first objective was to draw a picture of the existing academic literature on the use of social media tools in the PLC context to better understand how these tools were studied and used in businesses, and for what purpose. Second, this research aimed at understanding how SMEs actually use social media tools to support their different business activities to identify the gap between academic research and actual business practices. Finally, based on the findings highlighted from the previous objectives, this research aimed at developing theory on this topic by proposing a conceptual framework of customer engagement enabled by social media. The conceptual framework aimed at answering general questions that emerged from the initial two objectives: Why do some SMEs use social media to support customer engagement, while others do not? Why do firms use different social media tools to support their customer engagement initiatives? Why does the scope of customer engagement initiatives (i.e., across different PLC phases) vary between SMEs? What are the potential outcomes of conducting customer engagement initiatives for the organizing firms? In order to achieve these research objectives, the methodology employed for this research is threefold. First, a systematic literature review was performed in order to properly understand how the use of social media tools in the PLC context had been studied. The final results consisted of 78 academic articles which were analyzed based on their bibliometric information and their content. Second, in order to draw the contrast between the academic publications and managerial reality of SMEs, six semi-structured interviews were conducted to understand how these firms actually use social media to support different activities in each of the PLC phases. Third, five additional semi-structured interviews were performed to gather a deeper understanding of this phenomenon and generate theory to support the proposed conceptual framework. The conceptual framework focuses on the degree of customer engagement, which is comprised of the scope (PLC phases) of customer engagement and the technology (social media tools) employed to support these initiatives. Two sets of antecedents were examined, firm motivators and firm impediments, as they could both potentially affect the scope and the social media tools used to support customer engagement initiatives. Finally, potential customer engagement outcomes for SMEs developing these initiatives were also examined. The semi-structured interviews lasted approximately 25-35 minutes, and were performed using an interview grid consisting of 24 open-ended questions. The interview grid was developed based on the findings of the systematic literature review, and this qualitative approach allowed for a rich understanding of the interviewed SMEs’ use of social media tools to support and engage customers in their different PLC activities. The main results highlighted by this project demonstrate that this field is relatively recent and sees constant increase in research interest since 2008. However, most of the academic research focuses on the use of social media tools to support innovation activities during the new product development process, while the interviewed firms almost exclusively used the tools to engage customers in the later phases of the PLC, primarily for promotion, customer service support, and business development activities. Interestingly, the interviewed firms highlighted several benefits of using social media tools to engage customers, some of which could help them overcome certain size disadvantages previously mentioned. These firms are in need of further guidelines to properly implement such initiatives and reap the expected benefits. Results suggest that SMEs are far behind both large companies and academic research in their use of social media to engage customers in different business activities. The proposed conceptual framework serves as a great tool to better understand their reality and eventually better support them in their social media and customer engagement efforts. However, this framework needs to be further developed and improved. This research project provides a 360-degree view of the phenomenon of the use of social media to support customer engagement for SMEs, by providing both a thorough systematic review of the academic research and an understanding of the managerial reality of SMEs behind this phenomenon. From this analysis, a conceptual framework is then proposed and serves as a stepping stone for future researchers who are interested in developing theory in this field.

Who supports? The providers of social support to dual-parent families caring for young children

Previous research points to the importance of both kin and non-kin ties within social networks as sources of social support. This study examines the kin and non-kin providers of specific types of support to dual-parent low-income Australian families caring for young children. The study highlights the importance of family and friends as support providers. Study Participants tended to rely on family, including parents, siblings and other family members, and friends for emotional and information support. Parents also tended to provide material and practical support. While neighbors and community agencies offered some emotional and information support, overall, these sources were minimal. (C) 2002 Wiley Periodicals, Inc.

Chronic disease prevention and health promotion. Public policies and social network analysis of the hospitals services and oyhers health and social organizations to support joint action for children with diabetes

Comunicação apresentada na 18th Conference International of Health Promotion Hospitals & Health Services "Tackling causes and consequences of inequalities in health: contributions of health services and the HPH network", em Manchester de 14-16 de april de 2010

A framework to operate transformations between distinct models differing in modelling concepts

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Electrotécnica e de Computadores

Not all university degrees yield the same return: private and social returns to higher education for males in Spain

In this paper we use micro data from the Spanish Family Expenditure Survey for 1990 to estimate, for the first time, the private and social rates of return of different university degrees in Spain. We compute internal rates of return and include investment on higher education financed by the public purse to estimate social rates of return. Our main finding is that, as presumed, there is large heterogeneity in rates of return amongst different university

Quand faut-il opérer une fracture isolée du tiers moyen de la clavicule [When to operate an isolated midshaft clavicle fracture?]

Slightly displaced clavicular midshaft fracture is currently treated nonoperatively. There is considerable debate about whether acute displaced fractures should be treated operatively. Nonunion rate after displaced fracture has been underestimated for a long time, and malunion clinical impact often minimized. It is known that operative treatment decreases these rates. However, operating all displaced fractures may lead to overtreatment. Acute operative treatment of midshaft fractures with delayed treatment of established nonunion showed no significant difference in the outcome, but malunion surgical management is technically demanding. Consequently these fractures could be treated surgically, but operative indication should be adapted to patient expectations.

Generating Brand Equity through Corporate Social Responsibility to Key Stakeholders

In this paper we argue that socially responsible policies have a positive impact on a firm's brand equity in the short-term as well as in the long-term. Moreover, once we distinguish between different stakeholders, we posit that secondary stakeholders such as community are even more important than primary stakeholders (customers, shareholders, workers and suppliers) in generating brand equity. Policies aimed at satisfied community interests act as a mechanism to reinforce trust that gives further credibility to social responsible polices with other stakeholders. The result is a decrease in conflicts among stakeholders and greater stakeholder willingness to provide intangible resources that enhance brand equity. We provide support of our theoretical contentions making use of a panel data composed of 57 firms from 10 countries (the US, Japan, South Korea, France, the UK, Italy, Germany, Finland, Switzerland and the Netherlands) for the period 2002 to 2007. We use detailed information on brand equity obtained from Interbrand and on corporate social responsibility (CSR) provided by the SiRi Global Profile database, as compiled by the Sustainable Investment Research International Company (SiRi).