Technological and organisational change in small- to medium-sized manufacturing companies:a learning organisation perspective

This paper examines the extent to which a learning organisation perspective is attainable in small- to medium-sized manufacturing companies. An audit tool is developed from the literature on organisational learning and recognised processes that lead towards becoming a learning organisation. The paper focuses on the application of the audit tool in three UK automotive component suppliers which are all experiencing pressures for change imposed by the major vehicle manufacturers. The main changes are concerned with tiering of the supply chain and substantial delegation of responsibilities to component suppliers including an increasing emphasis on innovation and continuous improvement. The companies presented in the paper are taken from a research project into the impact of changes in supply chain relationships on the operation of small- and medium-sized manufacturing firms in the West Midlands region of the UK. The ways in which the companies are responding to change are presented together with the results of a self-assessment using the developed audit tool. These results suggest that companies of this type tend to focus on change in those areas that involve least challenge to the established power and authority of management.

Evaluating shock absorption behavior of small-sized systems under programmable electric field

A simple ball-drop impact tester is developed for studying the dynamic response of hierarchical, complex, small-sized systems and materials. The developed algorithm and set-up have provisions for applying programmable potential difference along the height of a test specimen during an impact loading; this enables us to conduct experiments on various materials and smart structures whose mechanical behavior is sensitive to electric field. The software-hardware system allows not only acquisition of dynamic force-time data at very fast sampling rate (up to 2 x 10(6) samples/s), but also application of a pre-set potential difference (up to +/- 10 V) across a test specimen for a duration determined by feedback from the force-time data. We illustrate the functioning of the set-up by studying the effect of electric field on the energy absorption capability of carbon nanotube foams of 5 x 5 x 1.2 mm(3) size under impact conditions. (C) 2014 AIP Publishing LLC.

Picophytoplankton in freshwater ecosystems: the importance of small-sized phototrophs

About 40 years have passed since the discovery of picophytoplankton; the present knowledge of the taxonomy, physiology and ecology of these tiny photoautotrophic cells offers new perspectives on the importance of the microbial contribution to global biogeochemical cycles and food webs. This review focuses on the relationships among the components of picophytoplankton (picocyanobacteria and the picoplanktic eukaryotes) and biotic and abiotic environmental factors. The dynamics of picophytoplankton in aquatic ecosystems are strictly dependent upon basin size and trophy, temperature, and nutrient and light limitation, but they are also regulated by grazing and viral-induced lysis. The review considers: the pros and cons of the molecular approach to the study of the taxonomy of freshwater Synechococcus spp.; the importance of ecological aspects in understanding the puzzle of picophytoplankton phylogeny (genotype vs ecotype); and the role of biotic vs abiotic interactions in controlling picophytoplankton dynamics. Biotic, top-down control mechanisms are reviewed as well as knowledge of other biological interactions.

Picophytoplankton in freshwater ecosystems: the importance of small-sized phototrophs

About 40 years have passed since the discovery of picophytoplankton; the present knowledge of the taxonomy, physiology and ecology of these tiny photoautotrophic cells offers new perspectives on the importance of the microbial contribution to global biogeochemical cycles and food webs. This review focuses on the relationships among the components of picophytoplankton (picocyanobacteria and the picoplanktic eukaryotes) and biotic and abiotic environmental factors. The dynamics of picophytoplankton in aquatic ecosystems are strictly dependent upon basin size and trophy, temperature, and nutrient and light limitation, but they are also regulated by grazing and viral-induced lysis. The review considers: the pros and cons of the molecular approach to the study of the taxonomy of freshwater Synechococcus spp.; the importance of ecological aspects in understanding the puzzle of picophytoplankton phylogeny (genotype vs ecotype); and the role of biotic vs abiotic interactions in controlling picophytoplankton dynamics. Biotic, top-down control mechanisms are reviewed as well as knowledge of other biological interactions.

Microscopic Evidence of the Opportunistic Reproductive Strategy and Early Sexual Maturation of the Small-Sized Characin Knodus moenkhausii (Characidae, Pisces)

We investigated the reproductive biology of Knodus moenkhausii, an abundantsmall-sized characin fish with broad occurrence in the Parana River basin, Bra-zil. Specimens were collected monthly to determine fecundity, length at firstmaturity, reproductive period and spawning type. Gonads were macroscopically classified according to their form, size and texture in three different stages(immature, maturing or mature). Histological procedures were conducted toconfirm gonadal developmental stages, and it was possible to notice thatmaturing females actually presented atretic oocytes, and all males that weremacroscopically classified as immature, maturing and mature actually presentedabundant spermatozoa in their gonads. Because of these discrepancies, a reclas-sification of gonadal maturations stages was needed after histological analysis,reinforcing its importance to studies on the reproduction of small characins.Reproduction occurred throughout the year though with two peaks. The lengthof the smallest mature individuals was 13 mm SL for males and 24 mm SL for females. Despite presenting relatively small batch fecundity, some life historytraits such as early reproduction, multiple spawning throughout the year, inassociation with known opportunistic feeding habits, explain the high abun-dance of this species in locations where it occurs.

Morbidity in 201 patients with small sized meningioma treated by microsurgery

The management of patients with small, often asymptomatic meningiomas is controversial and includes observation, microsurgery (MS) and stereotactic radiosurgery (SRS). The purpose of this retrospective study was to analyze the morbidity and the extent of removal after MS for small (< or =3 cm) intracranial meningiomas and compare these results to those of SRS reported in the literature.

Power system stability of a small sized isolated network supplied by a combined wind-pumped storage generation system: a case study in the Canary Islands

Massive integration of renewable energy sources in electrical power systems of remote islands is a subject of current interest. The increasing cost of fossil fuels, transport costs to isolated sites and environmental concerns constitute a serious drawback to the use of conventional fossil fuel plants. In a weak electrical grid, as it is typical on an island, if a large amount of conventional generation is substituted by renewable energy sources, power system safety and stability can be compromised, in the case of large grid disturbances. In this work, a model for transient stability analysis of an isolated electrical grid exclusively fed from a combination of renewable energy sources has been studied. This new generation model will be installed in El Hierro Island, in Spain. Additionally, an operation strategy to coordinate the generation units (wind, hydro) is also established. Attention is given to the assessment of inertial energy and reactive current to guarantee power system stability against large disturbances. The effectiveness of the proposed strategy is shown by means of simulation results.

Design, implementation and control of a small industrial manufacturing system

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY WITH PRIOR ARRANGEMENT

Monitoring system for small sized photovoltaic power plants

This paper presents a monitoring system devoted to small sized photovoltaic (PV) power plants. The system is characterized by: a high level of integration; a low cost, when compared to the cost of the PV system to be monitored; and an easy installation in the majority of the PV plants with installed power of some kW. The system is able to collect, store, process and display electrical and meteorological parameters that are crucial when monitoring PV facilities. The identification of failures in the PV system and the elaboration of performance analysis of such facilities are other important characteristics of the developed system. The access to the information about the monitored facilities is achieved by using a web application, which was developed with a focus on the mobile devices. In addition, there is the possibility of an integration between the developed monitoring system and the central supervision system of Martifer Solar (a company focused on the development, operation and maintenance of PV systems).

Corporate social responsibility–oriented compliances and SMEs access to global market : evidence from Bangladesh

The convergence of corporate social responsibility (CSR) and corporate governance has immense impact on the participants in global supply chains. The global buyers and retailers tend to incorporate CSR in all stages of product manufacturing within their supply chains. The incorporated CSR thus creates the difficulty to small- and medium-sized manufacturing enterprises (SMEs). Incompetence in standardized CSR practices is an important issue that causes SMEs either losing their scope to access global market directly or serving as subcontractors to large enterprises. This article explores this issue by focusing on Bangladeshi SMEs under the CSR requirement of the important global buyer.

A predictive model of the export behaviour of small and medium sized firms: an application to the case of Castilla-La Mancha

[EN] Based on an extensive theoretical review, the aim of this paper is to carry out a closer examination of the differences between exporters according to their commitment to the international market. Once the main disparities are identified by means of a non-parametric test, a logistic analysis based upon data collected from small and medium sized manufacturing firms is conducted in order to construct a classificatory model.

IS/IT outsourcing practices of small- and medium-sized manufacturers

Firms began outsourcing information system functions soon after the inception of electronic computing. Extant research has concentrated on large organizations and large-valued outsourcing contracts from a variety of different industries. Smaller-sized firms are inherently different from their large counterparts. These differences between small and large firms could lead to different information technology/information system (IT/IS) items being outsourced and different outsourcing agreements governing these arrangements. This research explores and examines the outsourcing practices of very small through to medium-sized manufacturing organizations. The in-depth case studies not only explored the extent to which different firms engaged in outsourcing but also the nuances of their outsourcing arrangements. The results reveal that all six firms tended to outsource the same sorts of functions. Some definite differences existed, however, in the strategies adopted in relation to the functions they outsourced. These differences arose for a variety of reasons, including size, locality, and holding company influences. The very small and small manufacturing firms tended to make outsourcing purchases on an ad hoc basis with little reliance on legal advice. In contrast, the medium-sized firms often used a more planned initiative and sought legal advice more often. Interestingly, not one of the six firms outsourced any of their transaction processing. These findings now give very small, small-, and medium-sized manufacturing firms the opportunity to compare their practices against other firms of similar size.