Joint (X)over-bar and R charts with two-stage samplings

When joint (X) over bar and R charts are in use, samples of fixed size are regularly taken from the process, and their means and ranges are plotted on the (X) over bar and R charts, respectively. In this article, joint (X) over bar and R charts have been used for monitoring continuous production processes. The sampling is performed, in two stages. During the first stage, one item of the sample is inspected and, depending on the result, the sampling is interrupted if the process is found to be in control; otherwise, it goes on to the second stage, where the remaining sample items are inspected. The two-stage sampling procedure speeds up the detection of process disturbances. The proposed joint (X) over bar and R charts are easier to administer and are more efficient than the joint (X) over bar and R charts with variable sample size where the quality characteristic of interest can be evaluated either by attribute or variable. Copyright (C) 2004 John Wiley Sons, Ltd.

The non-central chi-square chart with two-stage samplings

In this paper, we consider the non-central chi-square chart with two stage samplings. During the first stage, one item of the sample is inspected and, depending on the result, the sampling is either interrupted, or it goes on to the second stage, where the remaining sample items are inspected and the non-central chi-square statistic is computed. The proposed chart is not only more sensitive than the joint (X) over bar and R charts, but operationally simpler too, particularly when appropriate devices, such as go-no-go gauges, can be used to decide if the sampling should go on to the second stage or not. (c) 2004 Elsevier B.V. All rights reserved.

The no-central chi-square chart with two-stage samplings

Throughout this article, it is assumed that the no-central chi-square chart with two stage samplings (TSS Chisquare chart) is employed to monitor a process where the observations from the quality characteristic of interest X are independent and identically normally distributed with mean μ and variance σ2. The process is considered to start with the mean and the variance on target (μ = μ0; σ2 = σ0 2), but at some random time in the future an assignable cause shifts the mean from μ0 to μ1 = μ0 ± δσ0, δ >0 and/or increases the variance from σ0 2 to σ1 2 = γ2σ0 2, γ > 1. Before the assignable cause occurrence, the process is considered to be in a state of statistical control (defined by the in-control state). Similar to the Shewhart charts, samples of size n 0+ 1 are taken from the process at regular time intervals. The samplings are performed in two stages. At the first stage, the first item of the i-th sample is inspected. If its X value, say Xil, is close to the target value (|Xil-μ0|< w0σ 0, w0>0), then the sampling is interrupted. Otherwise, at the second stage, the remaining n0 items are inspected and the following statistic is computed. Wt = Σj=2n 0+1(Xij - μ0 + ξiσ 0)2 i = 1,2 Let d be a positive constant then ξ, =d if Xil > 0 ; otherwise ξi =-d. A signal is given at sample i if |Xil-μ0| > w0σ 0 and W1 > knia:tl, where kChi is the factor used in determining the upper control limit for the non-central chi-square chart. If devices such as go and no-go gauges can be considered, then measurements are not required except when the sampling goes to the second stage. Let P be the probability of deciding that the process is in control and P 1, i=1,2, be the probability of deciding that the process is in control at stage / of the sampling procedure. Thus P = P1 + P 2 - P1P2, P1 = Pr[μ0 - w0σ0 ≤ X ≤ μ0+ w 0σ0] P2=Pr[W ≤ kChi σ0 2], (3) During the in-control period, W / σ0 2 is distributed as a non-central chi-square distribution with n0 degrees of freedom and a non-centrality parameter λ0 = n0d2, i.e. W / σ0 2 - xn0 22 (λ0) During the out-of-control period, W / σ1 2 is distributed as a non-central chi-square distribution with n0 degrees of freedom and a non-centrality parameter λ1 = n0(δ + ξ)2 / γ2 The effectiveness of a control chart in detecting a process change can be measured by the average run length (ARL), which is the speed with which a control chart detects process shifts. The ARL for the proposed chart is easily determined because in this case, the number of samples before a signal is a geometrically distributed random variable with parameter 1-P, that is, ARL = I /(1-P). It is shown that the performance of the proposed chart is better than the joint X̄ and R charts, Furthermore, if the TSS Chi-square chart is used for monitoring diameters, volumes, weights, etc., then appropriate devices, such as go-no-go gauges can be used to decide if the sampling should go to the second stage or not. When the process is stable, and the joint X̄ and R charts are in use, the monitoring becomes monotonous because rarely an X̄ or R value fall outside the control limits. The natural consequence is the user to pay less and less attention to the steps required to obtain the X̄ and R value. In some cases, this lack of attention can result in serious mistakes. The TSS Chi-square chart has the advantage that most of the samplings are interrupted, consequently, most of the time the user will be working with attributes. Our experience shows that the inspection of one item by attribute is much less monotonous than measuring four or five items at each sampling.

Year-round chemical aerosol records at Kohnen, Antarctica obtained by automatic samplings

Aimed at year-round recording of the chemical aerosol composition in central Antarctica, an unattended operating aerosol sampler was successfully deployed at the EPICA deep drilling site in Dronning Maud Land (Kohnen Station). Analyses of teflon/nylon filter packs consecutively collected over bi-weekly intervals during the February 2003 to December 2005 period allowed to evaluate seasonal concentration variations of methane sulphonate (MS), Cl-, NO3-, non-sea salt (nss-)SO4**2- and Na+, while NH4+ and mineral dust related ion results remained below detection limits. For MS and nss-SO4**2 distinct late summer maxima around 44 and 200 ng/m**3, respectively, were found, while (total) NO3- showed a broad November maximum of about 52 ng m**-3. In contrast, the highest concentrations of Na+ with peak values of up to 160 ng/m**3 were observed during the winter half year. The seasonality of these species broadly coincided with long-term observations at the coastal Neumayer Station, including surprisingly comparable NO3- levels. However, the biogenic sulphur and sea salt concentrations were lower at Kohnen by typically a factor of 2-3 and 10, respectively. The arrival of sea ice derived sea salt particles at Kohnen could not clearly detected, since even during mid-winter the nss-SO4**2- to Na+ ratio was generally too high to unambiguously identify a sulphur depleted sea salt SO4**2- fraction.

Correlations between designability and various structural characteristics of protein lattice models

Using six kinds of lattice types (4×4 ,5×5 , and6×6 square lattices;3×3×3 cubic lattice; and2+3+4+3+2 and4+5+6+5+4 triangular lattices), three different size alphabets (HP ,HNUP , and 20 letters), and two energy functions, the designability of proteinstructures is calculated based on random samplings of structures and common biased sampling (CBS) of proteinsequence space. Then three quantities stability (average energy gap),foldability, and partnum of the structure, which are defined to elucidate the designability, are calculated. The authors find that whatever the type of lattice, alphabet size, and energy function used, there will be an emergence of highly designable (preferred) structure. For all cases considered, the local interactions reduce degeneracy and make the designability higher. The designability is sensitive to the lattice type, alphabet size, energy function, and sampling method of the sequence space. Compared with the random sampling method, both the CBS and the Metropolis Monte Carlo sampling methods make the designability higher. The correlation coefficients between the designability, stability, and foldability are mostly larger than 0.5, which demonstrate that they have strong correlation relationship. But the correlation relationship between the designability and the partnum is not so strong because the partnum is independent of the energy. The results are useful in practical use of the designability principle, such as to predict the proteintertiary structure.

An extravariation model for improving confidence intervals of population size estimates from removal data

We propose a new model for estimating the size of a population from successive catches taken during a removal experiment. The data from these experiments often have excessive variation, known as overdispersion, as compared with that predicted by the multinomial model. The new model allows catchability to vary randomly among samplings, which accounts for overdispersion. When the catchability is assumed to have a beta distribution, the likelihood function, which is refered to as beta-multinomial, is derived, and hence the maximum likelihood estimates can be evaluated. Simulations show that in the presence of extravariation in the data, the confidence intervals have been substantially underestimated in previous models (Leslie-DeLury, Moran) and that the new model provides more reliable confidence intervals. The performance of these methods was also demonstrated using two real data sets: one with overdispersion, from smallmouth bass (Micropterus dolomieu), and the other without overdispersion, from rat (Rattus rattus).

Area-wide releases and evaluation of the parasitoid Eretmocerus hayati(Hymenoptera:Aphelinidae) for silverleaf whitefly control

Silverleaf whitefly (SLW), Bemisia tabaci biotype B, is a major horticultural pest that costs Queensland vegetable growers millions of dollars in lost production and control measures each year. In the Bowen and Burdekin districts of North Queensland, the major cultivated SLW host crops are tomatoes, melons, green beans, pumpkins, eggplants, and cucumbers, which cover a total production area of approximately 6500 ha. Eretmocerus hayati, an effective SLW parasitoid, was imported into Australia by CSIRO in 2002 and released from quarantine in 2004. In 2006, DAFF established a mass-rearing unit for E. hayati at Bowen Research Station to provide E. hayati for release on vegetable farms within its SLW integrated pest management research program. A total of 1.3 million E. hayati were released over three seasons on 34 vegetable farms in the Bowen and Burdekin districts (October 2006 to December 2008). Post-release samplings were conducted across the release area over this time period with parasitism levels recorded in tomatoes, melons, beans, eggplants, pumpkins, and various SLW weed hosts. Sample data show that E. hayati established at most release sites as well as some non-release sites, indicating natural spread. Overall results from these three years of evaluation clearly demonstrated that E hayati releases played a significant role in SLW control. In most crops sampled, E hayati exerted between 30 and 80% parasitism. Even in regularly sprayed crops, such as tomato and eggplant, E. hayati was able to achieve an overall average parasitism of 45%.

A simple and inexpensive two channel boxcar integrator

A two-channel boxcar integrator with an analog to digital converter was constructed using integrated circuits wherever convenient. The digital output can be instantaneously displayed or displayed after accumulating many samplings in the totaliser. The totaliser mode provides averaging at the digitiser level and hence the integrator has an infinite holding time. When used in the double boxcar mode the instrument overcomes the problem of any base line instability.

Fischereisituation, Probennahme und Zustand der Nutzfischbestände im Nordostatlantik im Jahre 2002

NE-arctic cod, saithe, haddock, redfish and Greenland halibut are important fish stocks of the European fisheries. In many European countries national data sampling projects on commercial fisheries have been established in recent years. Since 1990 German investigations in the NE-Atlantic have been mainly carried out on the commercial trawler FMS KIEL. The results of these sea samplings are used as German basic data for stock assessments of the “Arctic Fisheries Working Group” of the International Council for the Exploration of the Seas (ICES). Biological investigations were carried out in Norwegian waters, the Svalbard area and the Barents Sea (ICES Divisions I, IIa and IIb) on board FMS KIEL in March and October/November 2002. This report presents results of these cruises and an overview over the general fishery situation in 2002. Finally, results and recommendations on the scientific stock assessments of cod, saithe, haddock, redfishand Greenland halibut are reported.

Die nordostarktische Fischerei im Jahre 2003

Seasampling of the important northeast Arctic fish stocks cod, saithe, haddock, redfish and Greenland halibut was continued in 2003. The sampling is part of the European data sampling directive on commercial fisheries established in recent years. This directive is relevant for European waters as well as for other areas where quotas have been assigned for European community member states. Furthermore, the results of these samplings are used as German basic data for stock assessments of the “Arctic Fisheries Working Group” of the International Council for the Exploration of the Seas (ICES). This report presents results of biological investigations which were carried out in ICES divisions IIa and IIb on board FMS “KIEL” in January/February and July/August 2003. The last section summarizes results and recommendations on the scientific assessment of the northeast Arctic fish stocks.

Ichthyoplanktonaufnahmen als Beitrag zu Biodiversitätsuntersuchungen in der westlichen Ostsee

Ichthyoplankton material provides information on the species composition in an area of investigation and leads to a better understanding of the entire fish community. Since 1993 every year in May and/or June an ichthyoplankton survey in ICES-Subdivision 22 and 24 has been performed to sample the plankton community of fishery resources in the western Baltic Sea. One objective was to get signs of possible changes in the natural structures of this fish community. The time series derived from the Bongo-Net samples does not show a clear trend in larval densities. Values varied, but up to now samplings in the western Baltic Sea yielded only low mean densities. According to the kind of reproductive biology the fish species were divided in three major groups: • Fish species with a long developmental phase in the plankton community • Small short living species with benthic eggs and a reduced plankton phase • Guests without local spawning populations. Species could be identified, which were absent in the fish larvae catches of the western Baltic Sea in the 60s and 70s.

The gated integration technique for the accurate measurement of the autocorrelation function of speckle intensities scattered from random phase screens

A new approach based on the gated integration technique is proposed for the accurate measurement of the autocorrelation function of speckle intensities scattered from a random phase screen. The Boxcar used for this technique in the acquisition of the speckle intensity data integrates the photoelectric signal during its sampling gate open, and it repeats the sampling by a preset number, in. The average analog of the in samplings output by the Boxcar enhances the signal-to-noise ratio by root m, because the repeated sampling and the average make the useful speckle signals stable, while the randomly varied photoelectric noise is suppressed by 1/ root m. In the experiment, we use an analog-to-digital converter module to synchronize all the actions such as the stepped movement of the phase screen, the repeated sampling, the readout of the averaged output of the Boxcar, etc. The experimental results show that speckle signals are better recovered from contaminated signals, and the autocorrelation function with the secondary maximum is obtained, indicating that the accuracy of the measurement of the autocorrelation function is greatly improved by the gated integration technique. (C) 2006 Elsevier Ltd. All rights reserved.

Lipídios como indicadores de processos biogeoquímicos em sedimentos da margem continental do Estado do Rio de Janeiro

Este estudo constitui parte do Projeto Habitats Heterogeneidade Ambiental da Bacia de Campos coordenado pelo CENPES/Petrobras, um projeto multidisciplinar de caracterização ambiental que considera as diferentes feições e habitats da margem continental do sudeste brasileiro. O objetivo desta tese foi investigar os processos relacionados com a origem, o transporte e o acúmulo de matéria orgânica (MO) em sedimentos da margem continental da Bacia de Campos (RJ). Para isso, foram determinados a composição elementar da matéria orgânica (carbono e nitrogênio) por combustão a seco e os lipídios (esteróis, álcoois e ácidos graxos) por CG-MS e CG-DIC. Foram analisadas 215 amostras de sedimento superficial (0-2 cm de profundidade), coletadas em duas amostragens (períodos seco e chuvoso de 2008/2009), distribuídas sobre 12 isóbatas (de 25 a 3000 m) ao longo de 9 transectos de norte a sul da bacia. Além disto, foram ainda consideradas as isóbatas de 400 a 1900 m em dois cânions submarinos no norte da bacia (Almirante Câmara e Grussaí). Com base nos resultados obtidos, a MO sedimentar na plataforma e talude da bacia revelou-se essencialmente autóctone, derivada de produtores primários e secundários. Com isto, a MO contém uma fração reativa significativa e, portanto, é potencialmente biodisponível para os organismos bentônicos. No entanto, foram observados gradientes espaciais significativos na qualidade e na quantidade da MO sedimentar. Na plataforma continental (25 m a 150 m de profundidade) as concentrações de lipídios foram intermediárias e houve predomínio de MO sedimentar lábil. Exceções foram as áreas influenciadas por ressurgência costeira e/ou intrusão sub-superficial (próximo à Cabo Frio, Cabo de São Tomé e no limite norte da bacia), onde as concentrações foram altas. No talude superior e médio (400 a 1300 m) as concentrações de MO foram notadamente mais elevadas, mas com maior influência de processos bacterianos de alteração de sua composição original. E no talude inferior (1900 a 3000 m) as concentrações de MO estiveram muito baixas e apenas os lipídios mais resistentes à degradação bacteriana foram encontrados em concentrações mensuráveis. Isto sugeriu a exportação de materiais da plataforma ao longo do gradiente batimétrico, possivelmente decorrente da ação de meandros e vórtices da Corrente do Brasil e das correntes de fundo atuantes na região. Além disto, por ser lábil e biodisponível, a MO no sedimento apresenta uma fração biodisponível que pode ter uma influência na ecologia das comunidades bentônicas, particularmente aquelas localizadas no talude superior. Os cânions Grussaí e Almirante Câmara se revelaram regiões de acúmulo de MO e importantes no transporte da MO com valor nutritivo para comunidades bentônicas do talude médio e inferior.