Soil CO2 emission as related to incorporation of sugarcane crop residues and aggregate breaking after rotary tiller

O preparo do solo é um dos processos que aceleram a decomposição da matéria orgânica, transferindo carbono para atmosfera, principalmente na forma de CO2. Neste trabalho, investigou-se o efeito do preparo com enxada rotativa sobre as emissões de CO2 do solo durante 02 semanas após o preparo do solo, incluindo-se a presença de resíduos vegetais sobre a superfície. As emissões foram avaliadas por 15 dias após preparo em 3 parcelas: 1) sem preparo e sem palha superficial (SPs); 2) preparo com enxada rotativa sem a presença de palha na superfície (ERs), e 3) preparo com enxada rotativa com a presença de palha superficial (ERc). As emissões provenientes da ERc foram superiores às demais (0,777 g CO2 m-2 h-1), sendo as menores emissões registradas na parcela SPs (0,414 g CO2 m-2 h-1). As emissões totais indicaram que a diferença de C-CO2 emitida à atmosfera corresponde a 3% do total de carbono adicional presente na palha, na parcela ERc, quando comparado à parcela ERs. O aumento da emissão da parcela SPs para ERs foi acompanhado de uma modificação na distribuição do tamanho de agregados, especialmente aqueles com diâmetro médio inferior a 2 mm. O aumento da emissão da parcela ERs para ERc esteve relacionado a uma diminuição da massa de palha na superfície, com fragmentação e incorporação da mesma no interior do solo. Quando se analisa a correlação linear entre emissão de CO2 versus temperatura e umidade do solo, somente a emissão da ERc foi significativamente correlacionada (p<0,05) à umidade do solo.

Rotary tiller slot planter and method for using the same

The rotary tiller slot planter of the present invention comprises a subsoiler shank positioned to engage the soil and make a trench therein. A pair of rotary tiller blades are rotatably mounted on the opposite sides of the sub-soil shank in planes parallel thereto. The center-lines of the rotary tiller wheels are located behind the subsoil shank. Each of the wheels have a plurality of blades extending radially outwardly from the rotational axis thereof and terminating in outer radial ends which engage the soil slightly ahead of the subsoiler shank and adjacent the lateral edges of the trench. A seed tube shank is positioned behind the subsoiler shank and between the tiller wheels. The seed tube shank has a lower end positioned to extend below the soil surface. A seed tube is positioned behind the seed tube shank for depositing seed in the soil. The rotation of the blades on opposite sides of the subsoil shank causes the soil to be mechanically aggregated and aerated and helps prepare a seed bed for the seeds. Also, the rotating tiller blades chop the debris which may be along the trench and throw soil backwards so as to cover the planted seed. Shorter rotary blades on the tiller wheels are shaped to throw debris and the upper one-half inch of soil sideways away from the row.

Unit, direct support, and general support maintenance repair parts and special tools lists (including depot maintenance repair parts and special tools lists) : mixer, rotary tiller, DED, 4 wheel, pneumatic tired, self-propelled, NSN 3895-00-883-0437, FWD Corporation model B2-ll7l.

"June 1992."

Operator's, unit, direct support, and general support maintenance manual : mixer, rotary tiller, Seaman-Maxon, Inc. model TO730H-KEG, NSN 3895-01-331-8560.

"August 1992."

Direct and general support and depot maintenance repair parts and special tools lists : mixer, rotary tiller, diesel engine driven, 4 wheel, pneumatic tires, self-propelled, with flat hook tines (Rex Chainbelt, Inc. model HDTM), FSN 3895-987-5536).

"April 1969."

Organizational maintenance repair parts and special tools lists : mixer, rotary tiller, diesel engine driven, 4 wheel, pneumatic tires, self-propelled, with flat hook tines (Rex Chainbelt, Inc. model HDTM), FSN 3895-987-5536).

"10 February 1970"--Change no. 1.

Operator, organizational, direct support and general support maintenance manual : mixer, rotary tiller, DED, 4 wheel pneumatic tired, self-propelled (FWD Corporation model B2-1171) (FSN 3895-883-0437).

Includes index.

Organizational maintenance repair parts and special tools lists : mixer, rotary tiller ded, 4 wheel, pneumatic tired, self-propelled, NSN 3895-00-883-0437, FWD Corporation model B2-ll7l.

Includes index.

Direct support and general support maintenance repair parts and special tools lists (including depot maintenance repair parts and special tools lists) : mixer, rotary tiller DED, 4 wheel, pneumatic tired, self-propelled, NSN 3895-00-883-0437, FWD Corporation model B2-1171.

Includes index.

Unit, direct support, and general support maintenance repair parts and special tools list : mixer, rotary tiller : Seaman-Maxon, Inc. model TO730H-KEG, NSN 38935-01-331-8560.

"August 1992."

Soil CO2 efflux following rotary tillage of a tropical soil

Stopping the increase of atmospheric CO2 level is an important task and information on how to implement adjustments on tillage practices could help lower Soil CO2 emissions would be helpful. We describe how rotary tiller use on a red latosol affected Soil CO2 efflux. The impact of changing blade rotation speed and rear shield position on soil CO2 efflux was investigated. Significant differences among treatments were observed up to 10 days after tillage. Cumulative CO2 efflux was as much as 40% greater when blade rotation of 216 rpm and a lowered rear shield was compared to blade rotation of 122 rpm and raised shield. This preliminary work suggests that adjusting rotary tiller settings could help reduce CO2 efflux close to that of undisturbed soil, thereby helping to conserve soil carbon in tropical environments. (C) 2004 Elsevier B.V. All rights reserved.

Vertical distribution, size and composition of the weed seedbank under various tillage and herbicide treatments in a sequence of industrial crops

Investigations were conducted during the 2003, 2004 and 2005 growing seasons in northern Greece to evaluate effects of tillage regime (mouldboard plough, chisel plough and rotary tiller), cropping sequence (continuous cotton, cotton-sugar beet rotation and continuous tobacco) and herbicide treatment on weed seedbank dynamics. Amaranthus spp. and Portulaca oleracea were the most abundant species, ranging from 76% to 89% of total weed seeds found in 0-15 and 15-30 cm soil depths during the 3 years. With the mouldboard plough, 48% and 52% of the weed seedbank was found in the 0-15 and 15-30 cm soil horizons, while approximately 60% was concentrated in the upper 15 cm soil horizon for chisel plough and rotary tillage. Mouldboard ploughing significantly buried more Echinochloa crus-galli seeds in the 15-30 cm soil horizon compared with the other tillage regimes. Total seedbank (0-30 cm) of P. oleracea was significantly reduced in cotton-sugar beet rotation compared with cotton and tobacco monocultures, while the opposite occurred for E. crus-galli. Total seed densities of most annual broad-leaved weed species (Amaranthus spp., P. oleracea, Solanum nigrum) and E. crus-galli were lower in herbicide treated than in untreated plots. The results suggest that in light textured soils, conventional tillage with herbicide use gradually reduces seed density of small seeded weed species in the top 15 cm over several years. In contrast, crop rotation with the early established sugar beet favours spring-germinating grass weed species, but also prevents establishment of summer-germinating weed species by the early developing crop canopy.

Efeitos de sistemas de preparo do solo na cultura da soja (Glycine max (L.) Merrill)

Com o objetivo de avaliar o efeito de cinco equipamentos de preparo do solo sobre o desenvolvimento e a produtividade da cultura da soja (Glycine max L. (Merril)), foi conduzida uma pesquisa em Latossolo Vermelho distrófico, no município de Uberaba-MG, em delineamento experimental em blocos casualizados, com cinco tratamentos (escarificador, enxada-rotativa, arado de aivecas, arado de discos e grade aradora) e quatro repetições. Os sistemas de preparo do solo não mostraram diferenças para o número médio de dias para a emergência das plântulas, estande final, altura da primeira vagem e produtividade da cultura da soja. Os tratamentos com arado de disco, arado de aivecas e grade aradora proporcionaram as maiores populações iniciais da cultura. A altura das plantas foi afetada pelos sistemas de preparo utilizados, destacando-se o preparo com o arado de aivecas e com a enxada-rotativa, com os maiores e menores valores absolutos, respectivamente.

Métodos de preparo do solo: alterações na rugosidade do solo

Procurando relacionar os métodos de preparo de solo com alguns dos efeitos em um Latossolo Vermelho distrófico, foi conduzido, no município de Uberaba - MG, um trabalho utilizando-se do delineamento experimental em blocos casualizados, com cinco tratamentos e quatro repetições, tendo como tratamentos os preparos de solo: escarificador, enxada rotativa, arado de aivecas, grade aradora e arado de discos. Foram avaliadas a área mobilizada do solo e a área de elevação, tendo-se como referência a superfície natural do solo antes da mobilização, o empolamento do solo, a espessura média da camada mobilizada, o índice de rugosidade e a modificação da rugosidade do solo para a comparação da rugosidade antes e após sua mobilização. O escarificador proporcionou menor empolamento e maior índice de rugosidade do solo, enquadrando-se como preparo conservacionista por desestruturar menos o solo, podendo colaborar com as menores perdas de solo por erosão.

Carbon dioxide emissions after application of tillage systems for a dark red latosol in southern Brazil

Soil tillage may influence CO2 emissions in agricultural systems. Agricultural soils are managed in several ways in Brazil, ranging from no tillage to intensive land preparation. The objective of this study was to determine the effect of common soil tillage treatments (disk harrow, reversible disk plow, rotary tiller and chisel plow tillage systems) on the intermediate CO2 emissions of a dark red latosol, located in southern Brazil. Different tillage systems produced significant differences in the CO2 emissions, and the results indicate that the chisel plow produced the highest soil carbon loss during the 15 days period after tillage treatments were performed. Emissions to the atmosphere increased as much as 74 g CO2 m(-2), at the end of a 2-week period, in the plot where the chisel plow treatment was applied, in comparison to the non-disturbed plot. The results indicate that the total increase on the intermediate term soil CO2 emissions due to tillage treatments in southern Brazil is comparable to that reported for the more humid and cooler regions. (C) 2001 Elsevier B.V. B.V All rights reserved.